UNION For Columns Of CLOB Data Type Does Not Work
May 10, 2007
I have two tables Encounter & Encounter_History. They have same columns. One column is of type CLOB. My requirement is to retrieve all the distinct records from both the tables with order by a date column. But problem is, UNION does not work in case of CLOB data type.
I know it will work if I use UNION ALL, but it returns duplicate records.
Please give me suggestion, how to solve this problem.
For example: The following query does not work since column1 is a CLOB data type
select column1 from table1
union
select column1 from table2
Thanks
View 1 Replies
ADVERTISEMENT
Apr 29, 2008
Why the sequence different?
select * from (
select id=3,[name]='Z'
union all select 1,'G'
union all select 2,'R'
union all select 4,'Z'
) as t
order by [name]
--result:
---------
--1 G
--2 R
--4 Z
--3 Z
select * from (
select id=3,[name]='Z'
union select 1,'G'
union all select 2,'R'
union all select 4,'Z'
) as t
order by [name]
--result:
----------
--1 G
--2 R
--3 Z--changed
--4 Z
View 3 Replies
View Related
Oct 5, 2013
Using a code snippet borrowed from a co-worker, I have put together a query that, among other things, pulls a list value out of an xml clob field and displays it in the query results. My query as it stands right now is below, followed by a snippet from the xml clob that I am pulling from.
select * from
(Select Wtr_Service_Tag, Wtr_Tran_Origin, Wtr_Send_Date, Wtr_Receive_Date,
to_char(substr(wtr_req_xml,instr(substr(wtr_req_xml,1,8000),'SID')+8,12)) Asset_Tag
from ws_transactions
Where Wtr_Service_Tag In ('20458749610')
[Code] ....
This query is only able to pull the first value in the list.
I have two questions...
[1]How can I edit this query to pull all of the list items when there are more than 1? I have another field, in a separate table, that I can pull from to get that number.
[2]This one may be more complex. As currently written, the query pulls a fixed number of characters from the xml clob and either returns not enough data, or too much because the values I need to pull could be of varying lengths. I have no way to query what those lengths might be.
View 2 Replies
View Related
Apr 14, 2014
Source System : Oracle
Target System : Ms Sql Server 2012
ETL Tool Used : SSIS
My source data is present in XML File which is stored in CLOB column Of Oracle. CLOB column is compressed.I need to Migrate data by Uncompressing XML to SQL 2012 .
Do I need to define XML column in SQL Server 2012 for storing Uncompressed CLOB values ?
How to uncompress the clob and extract the required data from XML using SSIS .
View 2 Replies
View Related
Jun 10, 2014
How to access the XML, CLOB and BLOB Oracle data through linked server from SQL Server 2012?
I want to retrieve XML, CLOB and BLOB data from SQL Server 2012 through Oracle Linked server .
View 1 Replies
View Related
Jan 10, 2005
Hi
I have a table with image data type column. I would like to store photos (images in .jpg format) in the table. I am using ADODC to connect VB.NET with MS-SQL server 2000.
Thanzzzzzzzzzz... :rolleyes:
View 2 Replies
View Related
Jul 20, 2005
I am having alot of trouble with a union query Im trying to create.The bizarre thing is I initially created this query and managed tosave it as a viewSELECT ID, DepartureDate, City, Country, Region,fkDepartureAirport, CONVERT(MONEY, Price) AS Price, '1' AS TypeFROM dbo.vHolidayUNION ALLSELECT ID, ValidTo, DestCity, Country, Region, fkDepartureAirport,Price, '2' AS TypeFROM dbo.vFlightHowever when I tried to update the view to this:SELECT ID, DepartureDate, fkCity, City, fkCountry, Country,Region, fkDepartureAirport, CONVERT(MONEY, Price) AS Price, '1' ASTypeFROM dbo.vHolidayUNION ALLSELECT ID, ValidTo, fkCity, DestCity, fkCountry, Country, Region,fkDepartureAirport, Price, '2'FROM dbo.vFlightit comes up with the error: view definition includes no output columnsor includes no items in the from clause.Any ideas??????All suggestions appreciatedAlly
View 1 Replies
View Related
Jul 20, 2005
Hi,I have a database stored in MS SQL 2000 and an application written inVB5, which connects the database via JET/ODBC.I have a problem with the UNION statement.When I run a simple query like:"SELECT field1 FROM table1 UNION SELECT field2 FROM table2"I get the following error:"Runtime error 3078 - The Microsoft Jet database engine cannot find theinput table or query 'select field1 from table1'. Make sure it existsand that its name is spelled correctly."I can run the queries separately "SELECT field1 FROM table1" and "SELECTfield1 FROM table2", so that I'm sure table and field names are correctand I have permission to access them.Both field1 and field2 are the same type (int).If I run the query in MS SQL Query Analyzer, it works fine.It doesn't work only when I run it from VB/JET/ODBC.Has anyone already had this kind of problem?Any help will be highly appreciated!Thank you so much for the attention.--Posted via http://dbforums.com
View 1 Replies
View Related
Feb 20, 2014
Is there a way to query all the columns in a database that have the data type as Integer.
View 9 Replies
View Related
Aug 12, 2007
I'm using the XML Source to process a hierarchical set of XML. As such, the XML Source creates keys to maintain the hierarchy. This is very convenient, and keeps me from having to invent my own keys.
The problem is that the datatype of these keys defaults to DT_UI8. Which SQL Server 2005 datatype should I use to store these values in my staging tables? BIGINT corresponds to DT_I8, which can't accept DT_UI8 values.
View 8 Replies
View Related
Nov 20, 2007
I had a strange problem today with one of the identity fields in a frequently used table. It appears that the Identity column for a table had stopped incrementing after it reached 2147483585. Since I had inherited this table, I am not sure if the identity column type has been modified from int to numeric, but the current type is Numeric (9) which is 19 precision and 0 scale value.
When resetting the seed to 1, it started working. I tried creating a temp table with numeric value and it increments well beyond billions with no problems.
Has anyone encountered this? Any best practices around defining Identity data type (ie. use int or bigint and avoide Numeric)?
Thanks
NS
View 4 Replies
View Related
Mar 31, 2004
hi all
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin
declare @current_date datetime
set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from
(
(
select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min"
from topcat.class_contact
where status ='callback'
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) <> 0)
order by callback_date asc
--order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc
)
union
(
select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'callback'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) = 0)
order by callback_date asc
)
union
(
select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'No Connect'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
order by callback_date asc
)
union
(
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
)
) contact_queue
order by priority desc, recency desc, callback_date asc, frequency desc
end
View 1 Replies
View Related
Oct 31, 2007
Hi,i need an opinion on this,...i am using UNION ALL quite a bit in my queries..most of the time these are like 1 line select query,returning "different" type of stuff ..like say query 1 is returning one EmpName and query 2 is DOB and so on(keeping it simple for example)...i am combining it b/c i find it cumbersome to call 10 dfferent query to populate 1 structure(table etc) ,rather i wud call one and manipulate the result to fill up that one structure..Is that okay to combine different kind of return types in one (here first row of multi-select query result is empName,second row is DOB and so on...)?????thanks
View 5 Replies
View Related
Jan 24, 2008
Hi there,
i've tried using the SELECT SQL sentence on PPC with UNION and INNER JOIN in combination with DATEDIFF function which works fine on ordinary SQL but obviously does not work on compact edition. Is there some workaround?
SQL sentence that works:
Code Snippet
SELECT * FROM
(
SELECT 'O' Type, O.Name , OC.Name Contact, Birthday FROM OutletContact OC
INNER JOIN Outlet O ON OC.OutletID=O.OutletID
UNION
SELECT 'W' Type, W.Name,WC.Name Contact, Birthday FROM WholesalerContact WC
INNER JOIN Wholesaler W ON W.WholesalerID=WC.WholesalerID
) S
WHERE Birthday IS NOT NULL AND (DATEDIFF(day,GETDATE(),Birthday) BETWEEN 0 AND 14)
Thanks for any hint or solution to my problem,
Gorazd
View 1 Replies
View Related
Jul 20, 2005
Hi everyone,I encountered an error "Need to run the object to perform this operationCode execution exception: EXCEPTION_ACCESS_VIOLATION" When I try to import data from Oracle to MS SQL Server with EnterpriseManager (version 8.0) using DTS Import/Export Wizard. There are 508 rowsin Oracle table and I did get first 42 rows imported to SQL Server.Anyone knows what does the above error message mean and what causes therest of the row failed importing?Thanks very much in advance!Rene Z.--Posted via http://dbforums.com
View 1 Replies
View Related
Apr 29, 2014
I am having a bit of trouble writing a query that dynamically outputs what I need.
I have a table that looks like this:
COL1 AAA BBB CCC
CAT 1 3 3
CAT 1 2 2
CAT 1 4 4
DOG 2 3 3
DOG 5 5 5
MICE 1 1 1
I need it to dynamically output based off COL1, the output should look like this. When there are more rows for CAT, it should output more columns. Kind of like merging the columns
COL1 AAA BBB CCC AAA BBB CCC AAA BBB CCC
CAT 1 3 3 1 2 2 1 4 4
DOG 2 3 3 5 5 5 NULL NULL NULL
MICE 1 1 1 NULL NULL NULL NULL NULL NULL
View 3 Replies
View Related
Jul 19, 2006
I have a view that is using UNION ALL to combine common fields of two tables, this is my statement:
SELECT ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER
FROM dbo.CT_FRAME_T
UNION ALL
SELECT ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER
FROM dbo.CT_ATM_T
This works fine, but I would also like some fields that do not match to appear in the view. It is OK if the value is null for the rows of data from the other table that doesn't have the columns.
The other columns are called DLCI from CT_FRAME_T and then VPI, VCI from CT_ATM_T.
My view would then return ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER, DLCI (where applicable), VPI and VCI (where applicable). Is this possible?
View 2 Replies
View Related
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Feb 19, 2008
I have a subscriptions table that has many line items for each record. Each line item has a different type, dues, vol, Chapt.
101 dues Mem 100
101 Vol charity 200
101 chapt CHi 300
I want my end result to have one line item per record id, but I keep coming up with an error. I am pretty sure I am close, but need assistance before I can proceed.
101 mem 100 charity 200 chi 300
Error:
Server: Msg 207, Level 16, State 3, Line 2
Invalid column name 'PRODUCT_CODE'.
Server: Msg 207, Level 16, State 1, Line 2
Invalid column name 'product_code'.
Server: Msg 207, Level 16, State 1, Line 2
Invalid column name 'product_code'.
SELECTp.ID,
p.PRODUCT_CODE as Chapt,
p.product_code as Dues,
p.product_code as Vol
from (
SELECT ID,
product_code as Chapt,
Null as dues,
Null as Vol
from subscriptions
where prod_type = 'chapt'
AND BALANCE > 0
union all
SELECT ID,
Null as chapt,
product_code as Dues,
Null as vol
from subscriptions
where prod_type = 'dues'
AND BALANCE > 0
union all
SELECT ID,
Null as chapt,
Null as dues,
product_code as Vol
from subscriptions
where prod_type = 'vol'
AND BALANCE > 0
) AS p
GROUP BY p.id
View 9 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Feb 13, 2008
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
View 4 Replies
View Related
Mar 7, 2007
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
View 3 Replies
View Related
Jan 23, 2015
We have a table with 500+ columns. The data is non-normalized, i.e. there are four groups of fields for for "people", followed by data that applies to all people in the row (a "household").For ad-hoc queries, and because I wanted to index columns within each person (person 1's age, person 2's age, etc.), I used UNION:
SELECT P1Firstname AS FirstName, P1LastName as LastName, P1birthday AS birthday, HouseholdIncome, HouseholdNumber of Children, <other "household" columns>
UNION
SELECT P2Firstname AS FirstName, P2LastName as LastName, P2birthday AS birthday, HouseholdIncome, HouseholdNumber of Children, <other "household" columns>
I could get at least the P1... P2... P3... columns with PIVOT, but then I believe I'd have to JOIN back to the row anyway for the "household" columns. Performance of UNION good, but another person here chose to use PIVOT instead.I can' find any articles on PIVOT vs. UNION for "de-flattening".
View 2 Replies
View Related
May 13, 2008
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
View 10 Replies
View Related
Jul 20, 2005
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies
View Related
Sep 12, 2006
Hi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
View 1 Replies
View Related
Oct 9, 2007
I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
View 10 Replies
View Related
Jul 20, 2006
Any idea on performance comparison between VARCHAR and CLOB? For example, if I want to insert or update 4000 characters in a field of a row and I am confused whether that column's type would better be decalred as VARCHAR or CLOB, what do you suggest?
View 1 Replies
View Related
Aug 10, 2007
Hi All,
I want to cast my long and clob value, which datatype should i use which support both datatype.
i am using varchar2 for clob its working fine but when i use for long it is giving me error.
Any help will be appriciated.
Thanks
john
View 1 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
Aug 12, 2005
Bob writes "Your FAQ asks an intersting question:
Why doesn't SELECT @columns FROM @tablname work?
No answer is provided however.
I need to write a stored procedure the passes in a fieldname, retrives next key type int data from that field, increments the field, and returns the NextKey.
Would be nice if something like this worked:
DECLARE @iNext INT
SELECT @iNext = SELECT @columnName FROM Next_Keys WHERE ID = 1
SELECT @iNext = @iNext +1
UPDATE Next_Keys Set @columnName = @iNext WHERE ID = 1
RETURN @iNext
SQL Server 2000 - Win Server 2003
Editing SP from VS2005
TSQL newbe writing first sp"
View 1 Replies
View Related
Feb 23, 2004
The microsoft JDBC driver doesn't accept CLOB & BLOB field.
Does anyone know about this problem ?
Is it possible to found another driver that works correctly and that is free ?
Thank's
View 2 Replies
View Related
Apr 16, 2008
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
View 8 Replies
View Related
