UPDATE Column In Table1 From 2 Columns...
Jan 22, 2007
Hey ya'll...
I need to create a query that I can run that will allow me to essentially take the first initial and last name and combine them from two columns in one table and update one column with that new data in another table. Example of need:
UPDATE tblLogin.UserName with (first character(tblEmployee.FName)+(tblEmployee.LName)) WHERE tblLogin.EmployeeID = tblEmployee.EmployeeID.
That was TOTALLY pseudo code and I know I'll need a join statement in there somewhere. Both tables reside on the same database, such as this:
dbEMPLOYEE (Database)
--> tblLogin (Table)
----> UserName (Column)
--> tblEmployee (Table)
----> FName (Column)
----> LName (Column)
Any help would be GREATLY appreciated! Hopefully something soon - this was handed to me a few minutes ago and I have a few minutes to get it done.
iSheahan
View 5 Replies
ADVERTISEMENT
Feb 1, 2014
I have two tables with similar two columns as shown below
table1
code | organisation
256 | abc
832 | xyz
893 | tax
921 | abc
951 | abc
table2
code | organisation
951 | abc
832 | xyz
256 | abc
893 | tax
921 | tax
Now, I want to check whether all the codes in table1 existing in table2 and list them, and if both columns from table1 is matching with the both columns in table2. For e.g. 256|abc in table1 is matching with 256|abc in table2
The output should be :
921 | tax
For e.g. 256abc is there or not in table2,
View 5 Replies
View Related
Nov 22, 2007
Hi
I have table1 with tow columns ( col1 and col2)
table2 colums (col1 and col2)
Table1 -- col1--- col2
-----------A ---- dfg
-----------B ---- ght
Table2-- Col1--- col2
-----------A ----- jjk
-----------B ----- lkl
How do I update col2 of Table1 with the data from col2 of Table2 in a Single Query
View 3 Replies
View Related
Dec 17, 2013
I'm trying to update a value into a table a sum. The two tables have ID values. These ID values appear once in Table1 and multiple times in Table2. I'm currently trying to sum up the values in Table2 where the IDs are equal to Table1 and then update the value:
UPDATE [Table1] SET
[Total] =
(SELECT SUM([Table2].[QTY]) FROM [Table2],
[Table1] WHERE [Table1].[ID] = [Table2].[ID]
GROUP BY [Table1].[ID])
FROM [Table1], [Table2] WHERE [Table1].[ID] = [Table2].[ID]
View 2 Replies
View Related
May 21, 2008
Hi,I have three columns and want to update the third column based on the comparison of first two columns in the same table.For instance:Col1 - val1, val2, val3, val4, val5......Col2 - NULL, NULL, val1, NULL, val2....Col3 - TRUE, TRUE, FALSE, FALSE, FALSE....Thanks for any help.
View 4 Replies
View Related
May 9, 2008
I have a simple question that is more about performance on my code for updating a column with the sum of two columns:
Example
Table = dbo.adding
c1 c2 c3Sum
1 2
3 5
4 6
Now if I just simple write
Update dbo.adding
set c3SUM = c1 + c2
This works, but there is a null in c1 or c2 then I know I can write this:
if exists (select * from dbo.adding where c1 is NULL)
Update dbo.adding
set c1 = '0', c3SUM = '0' + c2 where c1 is NULL
if exists (select * from dbo.adding where c2 is NULL)
Update dbo.adding
set c2 = '0', equals = c1 + '0' where c2 is NULL
Update dbo.adding
set c3SUM = c1 + c2
This works as well, but I am not sure how perficient it is being that from my understanding the code will evaluate the table three times and update it based on the criteria. If the table consists of 100,000 rows then this might not be a good solution
Is there a more proficient way to do this... I personally try to as little coding as possible to help increase performance. I know I can make this very complex and declare variables and put everything in a loop, but I personally think that would be less profient..
View 8 Replies
View Related
Feb 1, 2008
Hi everybodyI'm a newbie to SQL-Server 2005 so please excuse me for my silly questionsRecently i wrote a simple web-Page in which i select data from a table and then bind them to a GridView on the formevery thing was simple as follows:
SqlConnection Con = new SqlConnection("Data Source=.;Initial Catalog=Test;Integrated Security=True"); Con.Open();
SqlDataAdapter da = new SqlDataAdapter("SELECT [ID], [Name], [Date] FROM [Table1] ORDER BY [Date]", Con); DataSet ds = new DataSet(); da.Fill(ds,"MyTable");
GridView1.DataSource = ds.Tables["MyTable"]; GridView1.DataBind();
But I have a question , when i change the [Table1] to [table1] (With lowercase T) , i receive the following errormessage:
Invalid object name 'table1'.
why is that? could anyone help me? even i tried to test this issue in [Microsoft Management Studio] and i got thesame result . realy what's the reason? before and with sql server 2000 i didn't have these issue.
Thanks in advance.Regards.
View 5 Replies
View Related
Oct 30, 2013
I have two tables T1 and T2
T1 is having User : Visiting Date
T2 IS having User : Last Visited Date
Now I have to update T2 with last visited date based on T1 Entry.
View 1 Replies
View Related
Jan 11, 2008
Hi everyoneI am trying to create a DELETE Trigger. I have 2 tables. Table1 andTable2. Table 2 has all the same fields and records as Table1 + 1extra column "date_removed"I would like that when a record is deleted from Table 1, the triggerfinds that record in Table2 and updates the date_removed filed withcurrent time stamp.The primary key on both is combination of domain,admin_group and cn.CREATE TRIGGER [tr_updateTable2] ON [dbo].tbl_Table1FOR DELETEASUpdate Table2SET date_removed = getDate()I'm stuck here, how do I manipulate on Table2 only the records thatwere deleted on Table1, so to only update date_removed filed for themin Table2?I guess i need to compare domain, cn and admin_group, but I don't knowhow.Any help would be greatly appreciatedThanks! :-)
View 3 Replies
View Related
Feb 11, 2008
update table1 set field1=null where id=1; commit;
where I can look for the user,who execute this statment?
It was 6.02.2007 or 7.02.2007.
All users connect using SQL Serwer Authentication.
It is test database and from 1 to 3 users connect to it, and submit not more then 10 SQl statmant per day.
View 3 Replies
View Related
Jul 7, 2015
I've got a table with 6 fields :
EmployeeAccess
(MasterID, LoginID, AccessID, Storage1, Storage2, Storage3)
that needs to be updated using the data in the following spreadsheet
NewEmployeeAccessData
(ID, MasterID, AccessID1, LoginID1)
There is a 1:1 relationship between the two tables..I'm trying to code a pair of update statements on the EmployeeAccess table (1 for LoginID, 1 for AccessID) with the following logic:
If LoginID is NULL, then Update LoginID with new LoginID1 value,
If LoginID is not null, and Storage1 is NULL then Update Storage1 with New LoginID1 values
If LoginID is not null, and Storage1 is not NULL and Storage2 is NULL then Update Storage2 with New LoginID1 values
etc etc...
The same applies when trying to populate the AccessID column
If AccessID is NULL, then Update AccessID with new AccessID1 value,
If AccessID is not null, and Storage1 is NULL then Update Storage1 with New AccessID1 values
If AccessID is not null, and Storage1 is not NULL and Storage2 is NULL then Update Storage2 with New AccessID1 values
etc etc.
I have no control over the schema of this table so I'm trying to work the logic on how to update the columns in my table only if the corresponding column data is NULL, else update the next non NULL Storage column.
View 7 Replies
View Related
Jul 31, 2015
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
View 5 Replies
View Related
Jun 27, 2007
For a table 'table1' in sqlserver 2000,
table1(col1) is clustred index 'Ix1' and table1(col1,col2,col3) is nonclustered index 'ix2'
is not tabel1(col1) 'ix1' a duplicate/redundant index ?
which index should be retained ?
or should both indexes remain on the OLTP table ?
Thanks a lot in advance.
View 1 Replies
View Related
May 30, 2015
I want to compare two columns in the same table called start date and end date for one clientId.if clientId is having continuous refenceid and sartdate and enddate of reference that I don't need any caseopendate but if clientID has new reference id and it's start date is not continuous to its previous reference id then I need to set that start date as caseopendate.
I have table containing 5 columns.
caseid
referenceid
startdate
enddate
caseopendate
[code]...
View 4 Replies
View Related
Jun 29, 2015
I need to delete records from a table (Table1) which has a foreign key column in a related table (Table2).
Table1 columns are: table1Id; Name. Table2 columns include Table2.table1Id which is the foreign key to Table1.
What is the syntax to delete records from Table1 using Table1.Name='some name' and remove any records in Table2 that have Table2.table1Id equal to Table1.table1Id?
View 11 Replies
View Related
Aug 2, 2006
Hi All,
I am working on a column chart type (stacked column sub-type) report.
Our customer requires us that the space(padding) between the columns should be a constant(including the space between the Y-axis and the first column). I know how to set the width of the columns, but I really don't know how to set the width of the space between them. The columns just varies the space between them automatically according to the number of the columns (the number of the columns is not certain).
Thanks a lot in advance!
Danny
View 2 Replies
View Related
Oct 14, 2015
LeaveEntitlementID PeriodID LeaveType EmployeeID NumberOfDays
1 1 Annual 1 10
2 1 Annual 1 10
3 1 Sick 2 10
4 2 Sick 2 10
5 2 Sick 2 10
I have the above table (LeaveEntitlement) which has the above columns.
What I want to sum the column NumberOfDays based on EmployeeID, LeaveType and PeriodID columns as of LeaveTypeNumberOfDays.
For example sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Annual
The result should be shown in new column name AnnualLeave (20)
sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Sick
The result should be shown in new column name SickLeave (10)
Same all leave Types
The table should be shown as the below after executing the query
LeaveEntitlementID PeriodID EmployeeID AnnualLeave SickLeave
1 1 1 20 0
2 1 2 0 10
3 2 2 0 20
is it possible in sql server
View 8 Replies
View Related
Jul 15, 2007
hi friends, i've a table with (columns) username, content,data,........... i need to delete all column names(i.e.,content,data,........) except username for the specified username. eg: consider username=mahendran. i've to delete the values in the content,data,...............for the username=mahendran. but username should exist.how to do that?pls help me......
View 3 Replies
View Related
Nov 10, 2007
Hi,I have made the code to update more than 2 columns..It is a bad syntax, could someone help me improve my syntax?Code: command.CommandText = "UPDATE Items SET (Quantityavailable,numtaken) = (Quantityavailable - @qty,numtaken + @qty) WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); The idea is to update Quantityavailable column by taking away the @qty value, and update numtaken column by adding the @qty column.It says there is a syntax error near '('. Thanks if someone can help,Jon
View 1 Replies
View Related
Nov 19, 2007
How do I update all of the columns I want to update in one swipe?I can do them 1 at a time like this, but how do I update them ALL to = 0? Update Booth_Visitors_Data Set Hygienic_Actuators = 0 Where Trade_Show_Id = 34NFPA_ActuatorsCG5_CJ5Conveyor_Rail_AdjusterEX510FEP_TubingKQG_fittingsControlNetEtherNet_IPISE_ZSESVVQCWashdown_ProductsInstrumentationFittingsGTAPOEM_GTAPEmailed
View 4 Replies
View Related
Jan 31, 2008
assume my Table's Columns looks like below1 , Annie, History, pass, null 2 , Colin, Math , Pass, null7 , Annie, History, Fail, 111 , Colin, Math , Fail, 2When Delete 7 , Annie, History, Fail, 111 , Colin, Math , Fail, 2using the last column to check which row is reference with itso when delete Row 7 which reference with 1 , Annie, History, pass, null when delete Row 11 which reference with2 , Colin, Math , Pass, nullif I gooing to delete the row of No7 the result would be1 , Annie, History, Fail, null 2 , Colin, Math , Pass, 0 11 , Colin, Math , Pass, 0if I going to delete the row of No11 the result would be1 , Annie, History, pass, null2 , Colin, Math , Pass, null7 , Annie, History, Fail, 1I think the simply way to explan iswhen you delete a row of data , first find out which row is reference with it and then update the row which reference with it can you teach me how to do it ? wirte this request in Code or useing SQL Script?thank you
View 1 Replies
View Related
Oct 10, 2005
Can i use a multiple set in the update clause?
update CML.dbo.property
set total_Billed_Q1
=ISNULL ( dbo.property2.total_Billed_Q1 , 0 ),
set total_Billed_Q2
=ISNULL ( dbo.property2.total_Billed_Q2 , 0 )
FROM property
INNER JOIN
property2 on
property.financial_year = property2.financial_year
and
property.property_ref = property2.property_ref
View 1 Replies
View Related
Jul 2, 2007
Hi
I have to update the incidents table.
The initiator and initdept are two corresponding columns whoes value I have to get from another table Employee where (initiator means Empname and initdept means title)
if i just do
select Empname,title from employee
it gives me correct output while
select initiator,initdept from incidents
It gives the initiator correct but instead of giving the initdept
it gives output as initaiator the out put is given below
initiator initdept
Jeff C. Taylor Jeff C. Taylor
Randy S. Jonas Randy S. Jonas
Mike lewis Mike lewis
it should give the out put like
initiator initdept
Jeff C. Taylor Software Engg
Randy S. Jonas Tester
I hope you got my question!
now I hav to update incidents table such that it should give initiator as well as its corrosponding initdept
thanks
sambhav jain
View 1 Replies
View Related
Sep 9, 2015
I have a student table like this studentid, schoolID, previousschoolid, gradelevel.
I would like to load this table every day from student system.
During the year, the student could change schoolid, whenever there is a change, I would put current records schoolid to the previous schoolid column, and set the schoolid as the newschoolid from student system.
My question in my merge statement something like below
Merge into student st
using (select * from InputStudent ins)
on st.id=ins.studentid
When matched then update
set st.schoolid=ins.schoolid
, st.previouschoolid= case when (st.schoolid<>ins.schoolid) then st.schoolid
else st.previouschoolid
end
, st.grade_level=ins.grade_level
;
My question is since schoolid is et at the first line of set statement, will the second line still catch what is the previous schoolid?
View 4 Replies
View Related
Aug 27, 2015
How to Update Column Value in the whole data base (based on Column Value)?
View 2 Replies
View Related
Aug 15, 2006
I have a stored procedure that inserts values into five columns of atable. I need another stored procedure that will allow the user to passone or more of those parameters and update only the column for the datathat was passed. In other words, the update may only have one or two ofthe parameters that was originally provided in the insert. Therefore, Ido not want to update the columns that did not change. What is theproper way to handle this situation?
View 1 Replies
View Related
May 15, 2006
I need to create an SSIS package that updates columns in a table from columns in another database where the keys match. What's the best way to do this?
View 3 Replies
View Related
Sep 25, 2007
i there,
I've got a problem With updates on a Table.
I want to update only the Columns which are different to the values of my update-Statement.
One of the problems is an update trigger , which is fired on all update statements.
I want the trigger to be fired only when there are real changes.
Of course i can retrospectively check if there was a real, but i can't devide the real updatet colums from the non changed values. I know there is a statement like RowsUpdated but it doesn't work that way. It indicates also the non changed columns. To lock the row pessimistic read and compare the contents before update is also no option for me.
Is there any command to perform this in a smart way? Or should it be suggested for the next version of SQL-Server like "UPDATE CHANGES MY_TABLENAME SET MY_COLUMN= ... "
thanks in advance
Raimund
View 4 Replies
View Related
May 5, 2008
Hi,
How do you express neither no in TSQL. I am trying to create a view that gathers work orders that are neither in one table nor in another
I tried the following few appraoches but feel there must be something better. thanks!
1.
Select *
FROM xyz
WHERE Status = Open
AND (Number
NOT IN (SELECT WONumber
FROM dbo.Table1)
OR Number
NOT IN (SELECT WONumber
FROM dbo.Table2))
2.
Select *
FROM xyz
WHERE Status = Open
AND Number
NOT IN (SELECT WONumber
FROM dbo.Table1)
UNION
Select *
FROM xyz
WHERE Status = Open
AND Number
NOT IN (SELECT WONumber
FROM dbo.Table2)
View 1 Replies
View Related
Apr 13, 2007
Hi Guys
I need your help again, I am try to update several columns and the data type is 'money'.
Below is the code I have used:
UPDATE CAT_Products SET
UnitCost ='10.00',UnitCost2 = '10.00',UnitCost3 = '10.00',UnitCost4 = '10.00',UnitCost5 = '10.00',UnitCost6 = '10.00'
WHERE ProductCode = '0008'
But it will not update, instead I get this error:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>[Error] Script lines: 1-9 -------------------------- Disallowed implicit conversion from data type varchar to data type money, table 'dbo.CAT_Products', column 'UnitCost'. Use the CONVERT function to run this query.
More exceptions ... Disallowed implicit conversion from data type varchar to data type money, table '.dbo.CAT_Products', column 'UnitCost2'. Use the CONVERT function to run this query.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The error message indicates that I need to use the convert function. But the columns data type is set at 'money' not 'varcher' . So do I need to convert data type to 'varcher' in order to update and convert back to data type 'money' when update complete? Or do I need to indicate in the update statement that data type is already 'money'? I am not sure how I would either.
Thanks
View 2 Replies
View Related
Nov 2, 2004
I am almost sure I can update variables columns in one select/case type
statement, but having problems working out the syntax.
I have a table with transactions - with tran types as the key.
in this example, types = A,B,C ,D.
in this first example I am updating the sum of QTY to value t_A based on
tran types =A.
can I perform sub query/case to update with the same where clause
but for types B,C and D?? I also have to insert for specific lot numbers each sum values.
Create table #t_reconcile(
t_lot_number int not null,
t_A float,
t_B float,
t_C float,
t_D float)
insert #t_reconcile
select t.lot_number, sum(t.qty)
from i , t
where i._id = t.event_id
i.transaction_type = 'A'
group by t.lot_number
order by t.lot_number
View 3 Replies
View Related
Mar 11, 2002
Hi
I have a 2 Tables EMP, STU
In EMP Table there is a Column "Country"
In STU Table there is a Column "City"
Where the EMPID = STUID
on this conditon how can i update those 2 columns
This is for one Table one column update how can i do 2 at a time
I don't want to do in 2 seperate UPDATE statements
UPDATE EMP
SET EMP.Country = 'USA'
WHERE EMP.EMPID = STU.STUID
Can some one can help me to fix this issue..
From
Madhavi
View 2 Replies
View Related
Jun 21, 2007
the following criteria.
i have the selection all done but am trying to figure out how to do the following:
if column4 < 0 then add column4 to column3, move 0 to column4;
if column3 < 0 then add column3 to column2, move 0 to column3;
if column2 < 0 then add column2 to column1, move 0 to column2;
add column3 to column4;
move column2 to column3;
move column1 to column2;
if column0 > 0 move column0 to column1, move 0 to column0 else move 0 to column1;
these are all numeric data types.
View 7 Replies
View Related
