We get the following error message.
"a floating point exception occured in the user process. current
transaction is cancelled".
this message comes when trying to excute a stored procedure. This
exception is unpredictable.
OS : Windows 2000 (SP3)
Version: SQL server 2000 (SP3).
I'm getting this error:
System.Data.SqlClient.SqlException: A floating point exception occurred in the
user process. Current transaction is canceled. at
System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping
tableMapping) at ...etc etc
when updating one particular table, but not when updating another using nearly the same code.
I've searched and searched on the inet, but with no joy.
Microsoft have several different manifestations of it, under various
different circumstances, but the solutions all seem to involve
installing SP4, which by the looks of it is a massive procedure that
you have to go to university to be competent to do.
In any case, according to Enterprise Manager, I already have SP4
included. On the other hand, the one file of mine I checked the date of
against MS's hotfix file list was 2002 not 2003, so who knows?
My Service Manager is v 8.00.760, and it's the Development Edition (ie it's all running on the one machine).
According to the info on sqlDataAdaptor.update, the
sqlError that gets returned as part of the sqlException contains
fields Class, which gives the seriousness of the error, and State,
which identifies the exact error. I get Class=16 (user-fixable)
and State=1, which we have to go to SQL Books Online to discover the
meaning of. SQL BO probably sounded like a good idea to W.Gates,
but it took me half an hour to get anywhere near finding out what that
'1' meant. When I did, it was (guess): 'A floating point
exception occurred in the user process. Current transaction is
canceled.' !!!
Can anyone please tell me what exactly might be causing the error?
Graham Rounce
sql server 2000 sp4 build 2184runs stats with maintenance plansp_msforeachtablestored procedure updating full stats for each table and the resultsare identicalA floating point exception occurred in the user process. Currenttransaction is canceled.all pointers are to move to latest service packAny pointers on how to avoid this errorThanks for your timeMassa
View 6 Replies View RelatedI am trying to run "select * from <table> where <columnname> = 0.0" inquery analyzer<columnname> is a floatI get the following error:Server: Msg 3628, Level 16, State 1, Line 1A floating point exception occurred in the user process. Currenttransaction is canceled.I get the same error when I use the float <columnname> through anapplicationI have tried upgrading to SP4, without any luck - still get the errormessage.Any help would indeed be appreciated.Thanks -AH
View 1 Replies View RelatedHi,I'm running SQL Server Version 8.00.194 on Windows 2000.I am am running this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere ReutersSymbol = 'IBM.N'and TheoVolImplied > 0.0TheoVolImplied is of type float, precision 15, length 8.When I run this query I get this error:Server: Msg 3628, Level 16, State 1, Line 1A floating point exception occurred in the user process. Currenttransaction is canceled.If I run this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere TheoVolImplied > 0.0It works fine with no problems.If I run this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere ReutersSymbol = 'IBM.N'It works fine with no problems.Anyone have any ideas about what might be wrong?
View 2 Replies View RelatedHi.
Intermittently, the following error has been displayed when a SQL job on our box (SQL Server 2000 Service Pack 4 running on Windows 2000) runs.
'A floating point exception occurred in the user process. Current transaction is canceled.' The error number given is 3628 though I've also seen a 4xxx number (not at machine at the moment so cant be precise for the latter).
The intermittent problem over the last two days has become more regular and now does not appear to be related solely to the SQL job. For example, when connecting to the box using my local copy of SQL 2005 Management Studio and I attempt to browse the database objects I get this problem.
To the best of my knowledge, this server has not had any software installed on it and/or nothing has changed on it recently.
It has now got to the point that this particular job no longer runs. The job in question, in case this is significant, is a vanilla stored proc that returns data using OPEN ROWSET to communicate with an Access database (this connectivity has been verified to be okay, in that other similar jobs all run just fine)
If anybody can shed some light and/or point me in the right direction I would be extremely grateful.
Cheers
CG
Hi,
I got below error in the SQL Server Production Server and i checked in the microsoft site it needs to install SQL Server service pack 4 to resolve the
problem.
"A floating point exception occurred in the user process. Current transaction is canceled"
I need help that i want to reproduce this below problem in the SQL Server environment and tried several ways but no luck.
Please advise me how to reproduce the problem.
Would be appreciate your help.
Regards
Sathish
I need to write a floating point value to a column in a SQL server database. I have the following line ofcode, that formats the float value before passing it off to the stored procedure.
Please look at the line of code below. Does the 8 after SqlDbType.Foat mean that this will be a floatingpoint with 8 signigicant digits past the decimal point?
mySqlCommand.Parameters.Add("@Price", SqlDbType.Float, 8).Value = float.Parse(InitialPrice);
Hello all,
I can't see any reason for this error, not having a high level understanding of maths I thought I'd post it and hope someone could share some light on it.
I yesterday got called by a client who said that a payment for £15 + VAT was being passed to their payment gateway as 17.62 when it should be 17.63. The VAT calculation is performed in a SQL Server 2000 stored procedure. In the end I tracked it down and it wasn't a propblem with my calculation.
The price was coming out as 17.63 fine. The stored procedure then had to return this price in pence (17.63 * 100 = 17.63). When I put in a print statement with this calculation it was correct but when I output the variable that the result was assigned to it was coming out as 1762.
The variable that the result was being put into was of real datatype.
I then wrote a udf to test this. Here is the function:
CREATE FUNCTION dbo.POUNDS_TO_PENCE
(
@POUNDVALUE real
)
RETURNS INTEGER
AS
BEGIN
RETURN @POUNDVALUE * 100
END
As you can see nothing very special.
If you run this runction and pass in 17.63 it will return 1762!!!
The bit I don't get is if I change the @POUNDSVALUE intput variable to type float it returns the correct amount.
I've also found that the same problem occurs when passing in £30 + VAT (35.25) + 1pence. So, 35.26 comes out as 3525 instead of 3526. This is the case if you keep doubling the number (and adding a few pence here and there).
Does anyone know why this is or is it a bug in the processor?
The SQL books online say the following about the float and real data types:
--------------------------------------------------------
float and real (T-SQL)
Approximate number data types for use with floating point numeric data. Floating point data is approximate; not all values in the data type range can be precisely represented.
Syntax
float[(n)]
Is a floating point number data from - 1.79E + 308 through 1.79E + 308. n is the number of bits used to store the mantissa of the float number in scientific notation and thus dictates the precision and storage size. n must be a value from 1 through 53.
n is Precision Storage size
1-24 7 digits 4 bytes
25-53 15 digits 8 bytes
The Microsoft® SQL Server™ float[(n)] data type conforms to the SQL-92 standard for all values of n from 1 to 53. The synonym for double precision is float(53).
real
Floating point number data from –3.40E + 38 through 3.40E + 38. Storage size is 4 bytes. In SQL Server, the synonym for real is float(24).
--------------------------------------------------------
Apart from the fact that it says 'Approximate number data types' I can't see any difference between the data type apart from the ranges.
Anyone any ideas?
Thanks
Tom Holder
How can I truncate a floating point number to required number of decimal points
Eg:
100.642364074 to 100.64 and 67.643929847 to 67.645
Thanks.
Hi,I would like to know, if I need to do some floting point operations(mainly multiplication and division) on each roll of a table, should Iread the data out from the DB and do the calculation with a programminglanguage, say C#, or should I just use sql to do it on the sql server.An obvious advantage of doing it in the sql server is that you dontneed to transfer the data between the sql server and he applicationserver.But I am not sure if there are any other factors that will overridethis advantage: like the performance of doing lots of floting pointoperations in sql server.How is the performance of doing floting point operations in sql servercomparing to C# or other languages?Also are there any other factors that should be considered for thiscase andare there any other advantages to do this is sql server or in c#?ThanksBenny*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedI'm trying to perform a calculation on a field in SQL Server thatshould return a value with a decimal point. My problem is that thevalue returned is truncated without the decimal point. Is there asetting that needs to be turned on in SQL server to allow this?for exampleSelect 20/3should return 6.6666667but instead I get 6
View 1 Replies View RelatedHi all
I'm a newbie in SQL server and please excuseme for this silly question, Could anyone tell me when i should use which of the following types:
Decimal
Float
Real
I've mixed up !!! all of them can have floating point BUT what's the difference? some advise please!
Thanks in advance.
Kind Regards.
Hi SQL people,
I have rating system on pages in my website, each page being rated one to five by users. At the back end, an ASP.NET page displays the average rating and number of ratings for each page. As the rating is stored as an integer, the SQL statement returns an integer average. I would like to get a floating point average. Currently the statement used to return the average looks like this:
select AVG(Rating) as AverageRating from Ratings where [RatingPage] = @RatingPage
Is there a simple way to modify this to return a floating point average without iterating through the records, or converting the Rating field to a float?
Thanks for helping!
The environment:
Machine1: IBM Records Manager 4.11(IRM) on top of WebSphere Applicaton Server 5.1.0 running on Windows Server 2003. Sql Server 2000 Client and SQL JDBC Driver with SP3 has been installed.
Machine2: SQL Server 2000 Developer Edition with SP3 is installed - Windows XP. IRM uses this remoteSQL Server database
I could login and do certain task through the web client of IBM Records Manager(IRM). But when I try perform create/edit/delete kind of operations, I get the following error at WebSphere end:
9/13/06 11:39:16:742 IST] 6c9f4838 WSRdbXaResour E DSRA0304E: XAException occurred. XAException contents and details are: The cause is : null.
[9/13/06 11:39:16:742 IST] 6c9f4838 WSRdbXaResour E DSRA0302E: XAException occurred. Error code is: UNKNOWN XA EXCEPTION CODE: 0. Exception is: [IBM][SQLServer JDBC Driver]There is Uncommitted local transaction work. Can't start an XA transaction until the local work has been committed or rolled back.
[9/13/06 11:39:16:757 IST] 6c9f4838 XATransaction E J2CA0027E: An exception occurred while invoking start on an XA Resource Adapter from dataSource recordmanager/jdbc/sqlserver/ds01, within transaction ID {XID: formatId(57415344), gtrid_length(39), bqual_length(28), data(00000000000001dc0000000148c3909b0b45226df78cc013b7f774854a82fdaa7365727665723148c3909b0b45226df78cc013b7f774854a82fdaa0000000105c83d07)}: javax.transaction.xa.XAException: [IBM][SQLServer JDBC Driver]There is Uncommitted local transaction work. Can't start an XA transaction until the local work has been committed or rolled back.
at com.ibm.websphere.jdbcx.base.BaseXAResource.start(Unknown Source)
at com.ibm.ws.rsadapter.spi.WSRdbXaResourceImpl.start(WSRdbXaResourceImpl.java:927)
at com.ibm.ejs.j2c.XATransactionWrapper.start(XATransactionWrapper.java:1267)
at com.ibm.ws.Transaction.JTA.JTAResourceBase.start(JTAResourceBase.java:164)
at com.ibm.ws.Transaction.JTA.RegisteredResources.startRes(RegisteredResources.java:389)
at com.ibm.ws.Transaction.JTA.TransactionImpl.enlistResource(TransactionImpl.java:1903)
at com.ibm.ws.Transaction.JTA.TranManagerSet.enlist(TranManagerSet.java:494)
at com.ibm.ejs.j2c.XATransactionWrapper.enlist(XATransactionWrapper.java:602)
at com.ibm.ejs.j2c.ConnectionEventListener.interactionPending(ConnectionEventListener.java:745)
at com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.processInteractionPendingEvent(WSRdbManagedConnectionImpl.java:1446)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.beginTransactionIfNecessary(WSJdbcConnection.java:329)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.prepareCall(WSJdbcConnection.java:1342)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.prepareCall(WSJdbcConnection.java:1292)
at com.ibm.gre.engine.dao.sqlserver.UtilitySQLDAO.getExtendedAttributesById(UtilitySQLDAO.java:108)
at com.ibm.gre.engine.ejb.business.fileplandesign.RelationshipDefinitionEJBBean.getListByFPViewID(RelationshipDefinitionEJBBean.java:236)
at com.ibm.gre.engine.ejb.business.fileplandesign.EJSLocalStatelessRelationshipDefinitionEJB_eb4df5e6.getListByFPViewID(EJSLocalStatelessRelationshipDefinitionEJB_eb4df5e6.java:151)
at com.ibm.gre.engine.ejb.facade.FilePlanDesignControllerEJBBean.getRelationshipDefinitionListByFPViewID(FilePlanDesignControllerEJBBean.java:189)
at com.ibm.gre.engine.ejb.facade.EJSRemoteStatefulFilePlanDesignControllerEJB_e23bb402.getRelationshipDefinitionListByFPViewID(EJSRemoteStatefulFilePlanDesignControllerEJB_e23bb402.java:239)
at sun.reflect.GeneratedMethodAccessor122.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at com.ibm.rmi.util.ProxyUtil$4.run(ProxyUtil.java:703)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.rmi.util.ProxyUtil.invokeWithClassLoaders(ProxyUtil.java:701)
at com.ibm.CORBA.iiop.ClientDelegate.invoke(ClientDelegate.java:1084)
at $Proxy5.getRelationshipDefinitionListByFPViewID(Unknown Source)
at com.ibm.gre.engine.ejb.facade._FilePlanDesignControllerEJB_Stub.getRelationshipDefinitionListByFPViewID(_FilePlanDesignControllerEJB_Stub.java:745)
at com.ibm.gre.webclient.businesslayer.ejb.EJBCallAdapter.viewRelationshipDefinitionList(EJBCallAdapter.java:3807)
at com.ibm.gre.webclient.fileplandesign.views.actions.ViewEditAction.greExecute(ViewEditAction.java:135)
at com.ibm.gre.webclient.common.CommonAction.greExecute(CommonAction.java:642)
at com.ibm.gre.webclient.common.CommonAction.execute(CommonAction.java:341)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.ibm.gre.webclient.security.plugin.SecurityRequestProcessor.process(SecurityRequestProcessor.java:58)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:974)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:555)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:200)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:119)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:276)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:114)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
I followed the instructions from one of the article about Microsoft SQL Server 2005 JDBC Driver 1.0 (Note I'm using Microsoft SQL Server 2000 and this driver is compatible with SQL Server 2000): copy sqljdbc_xa.dll to SQL Binn directory and execute the script xa_install.sql. And XA Transaction is enabled on the SQL Server 2000 running machine.
Even after have finished all the steps I still get the same error.
Pls help me on this problem.
Thanks in advance
N.Yogendran
I have the following query:
SELECT AVG(respondent_question.answer)
Now, the 'answer' column is an integer. However, I want the query to return a floating point number with one decimal place (i.e., 5.4, 2.3)
Since the column is an integer, the query returns only an integer by rounding to the nearest integer. How can I do this? Thanks!
I'm having a problem that I think is due to corrupt data. Depending on
the column I use in my order by clause two problems are occuring.
1. No results are returned and I get this error:
A floating point exception occured in the user process.
2. Results are returned but there are a different number of rows depending on which columns I use in my Order By clause.
Examples
SELECT * FROM SymbolStats
ORDER BY calc_date, symbol
Returns - 12207 rows but only includes one of the 25 dates in the table.
----------
SELECT * from SymbolStats
ORDER BY current_hv
Returns - 0 rows.
----------
SELECT * from SymbolStats
ORDER BY average_hv
Returns - floating point error
With more conditions in the WHERE clause the number of results returned varies greatly.
The
fact that different numbers of rows can be returned from the same query
only differing in how they are ordered seems like a bug.
Does this sound like corrupt data? If so, what are the best methods for fixing it?
Thanks,
patrick
I am trying to understand why SQL Server gives me significantly lower precision than many of the other sources that have tried when using the POWER function. My environment is 2008 R2 SP2 (10.50.4000.0 X64, Standard edition) on Windows 2008 X64 SP1
DECLARE @x FLOAT(53) = 1.0004;
DECLARE @y FLOAT(53) = 1.0/12.0;
SELECT POWER(@x,@y)-1; -- Answer: 3.33270904724348E-05
GO
DECLARE @x FLOAT(24) = 1.0004;
DECLARE @y FLOAT(24) = 1.0/12.0;
[URL] ....
Answer: 3.33272237835747E-05
I also tried using Windows Calculator.Answer:3.3327223783495255846580902358195e-5
And an online "high-precision" calculator from [URL] ...
Answer: 3.332722378349525584658E-5
The best SQL results compare only to the fourth digit with other results. Everything else agrees to the 10th or 12th digit.
Is the precision of arithmetic calculations on SQL Server that bad, or am I doing something wrong here? Is there another more precise alternative?
I did the following. The results speak for themselves
DECLARE @x FLOAT(53) = 1.0004;
DECLARE @y FLOAT(53) = 1.0/12.0;
DECLARE @z FLOAT(53) = POWER(@x,@y)-1; -- Answer: 3.33270904724348E-05
SELECT POWER((1+@z),12); -- 1.00039999839968
-- using results from other sources (c#, windows calc, casio.com)
SELECT POWER((1+3.33272237835747E-05),12) -- 1.0004
SELECT POWER((1+3.3327223783495255846580902358195e-5),12)-- 1.0004
SELECT POWER((1+3.332722378349525584658E-5),12) -- 1.0004
It is not important what I am trying to do, but in case it will work, I am trying to calculate the monthly return for a 90-day T-bill given the compounded annual return. x is the annualized return.
Hello,
we've recently upgraded a database from sql 2000 to sql 2005. There is one report that creates a fatal exception and sql dump whenever it is run. It ran without error in 2000.
The report is using several sql views and one stored proc. Running these individually via sql don't cause any errors. All other reports and processes run fine in 2005.
I'm at a loss as to what to check next. Any ideas?
Please let me know if I can provide any more details to help troubleshoot the issue.
thanks,
joe
I have an execute process task that kicks off gzip to uncompress files within a for each loop. We get a LOT of bad files which causes gzip to throw an unexpected EOF error. This gets bubbled up into SSIS as a Win32 unhandled exception error which then throws up the VS JIT Debugger interface. I know what these errors are and do not want to debug. Is there anyway that I can simply ignore the exception and just throw it away?
View 5 Replies View RelatedTeam
I keep getting this error every so often in the SQL Server(2005.90.3054.00). 2005/SP2/Hot Fixes. Windows Server 2003 SP2. I have researched the web, every one seems to have the same question and nobody seems to have an answer.
This somehow does not show up in the Profiler. The apps work normally too.
It is a huge eye sore in the LOGs.
=================
BugCheck Dump
=================
This file is generated by Microsoft SQL Server version 9.00.3054.00 upon detection of fatal unexpected error. Please return this file, the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE.
Bios Version is COMPAQ - 2
Current time is 15:52:36 09/27/07.
8 Intel x86 level 15, 2694 Mhz processor (s).
Windows NT 5.2 Build 3790 CSD Service Pack 2.
Memory
MemoryLoad = 93%
Total Physical = 9727 MB
Available Physical = 638 MB
Total Page File = 13613 MB
Available Page File = 4573 MB
Total Virtual = 2047 MB
Available Virtual = 246 MB
***Stack Dump being sent to E:Microsoft SQL ServerMSSQL.1MSSQLLOGSQLDump1331.txt
SqlDumpExceptionHandler: Process 91 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is
terminating this process.
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 09/27/07 15:52:36 spid 91
* Exception Address = 0100E88E Module(sqlservr+0000E88E)
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 0000000C
* Input Buffer 36 bytes -
* s p S e l e c t 10 00 73 00 70 00 53 00 65 00 6c 00 65 00 63 00 74 00
* I n t e r n e t 49 00 6e 00 74 00 65 00 72 00 6e 00 65 00 74 00 00 00
* MODULE BASE END SIZE
* sqlservr 01000000 02C0AFFF 01c0b000
* ntdll 7C800000 7C8BFFFF 000c0000
* kernel32 77E40000 77F41FFF 00102000
* MSVCR80 78130000 781CAFFF 0009b000
* msvcrt 77BA0000 77BF9FFF 0005a000
* MSVCP80 7C420000 7C4A6FFF 00087000
* ADVAPI32 77F50000 77FEAFFF 0009b000
* RPCRT4 77C50000 77CEEFFF 0009f000
* Secur32 76F50000 76F62FFF 00013000
* USER32 77380000 77410FFF 00091000
* GDI32 77C00000 77C47FFF 00048000
* CRYPT32 761B0000 76242FFF 00093000
* MSASN1 76190000 761A1FFF 00012000
* MSWSOCK 71B20000 71B60FFF 00041000
* WS2_32 71C00000 71C16FFF 00017000
* WS2HELP 71BF0000 71BF7FFF 00008000
* USERENV 76920000 769E1FFF 000c2000
* opends60 333E0000 333E6FFF 00007000
* NETAPI32 71C40000 71C96FFF 00057000
* SHELL32 7C8D0000 7D0CDFFF 007fe000
* SHLWAPI 77DA0000 77DF1FFF 00052000
* comctl32 77420000 77522FFF 00103000
* psapi 76B70000 76B7AFFF 0000b000
* instapi 48060000 48069FFF 0000a000
* CLUSAPI 74DE0000 74DF1FFF 00012000
* ole32 77670000 777A8FFF 00139000
* OLEAUT32 77D00000 77D8AFFF 0008b000
* RESUTILS 74EF0000 74F02FFF 00013000
* sqlevn70 4F610000 4F7B8FFF 001a9000
* SQLOS 344D0000 344D4FFF 00005000
* rsaenh 68000000 68034FFF 00035000
* AUTHZ 76C40000 76C53FFF 00014000
* MSCOREE 79000000 79044FFF 00045000
* msv1_0 76C90000 76CB6FFF 00027000
* iphlpapi 76CF0000 76D09FFF 0001a000
* kerberos 61FF0000 62047FFF 00058000
* cryptdll 766E0000 766EBFFF 0000c000
* schannel 76750000 76776FFF 00027000
* COMRES 620B0000 62175FFF 000c6000
* XOLEHLP 62180000 62185FFF 00006000
* MSDTCPRX 62190000 62208FFF 00079000
* msvcp60 62210000 62274FFF 00065000
* MTXCLU 62280000 62298FFF 00019000
* VERSION 77B90000 77B97FFF 00008000
* WSOCK32 71BB0000 71BB8FFF 00009000
* DNSAPI 76ED0000 76EF9FFF 0002a000
* winrnr 622F0000 622F6FFF 00007000
* WLDAP32 76F10000 76F3DFFF 0002e000
* rasadhlp 62320000 62324FFF 00005000
* hnetcfg 62330000 62389FFF 0005a000
* wshtcpip 71AE0000 71AE7FFF 00008000
* security 62890000 62893FFF 00004000
* msfte 63070000 632C8FFF 00259000
* dbghelp 632E0000 633F4FFF 00115000
* WINTRUST 76BB0000 76BDAFFF 0002b000
* imagehlp 76C10000 76C37FFF 00028000
* dssenh 68100000 68126FFF 00027000
* NTMARTA 77E00000 77E20FFF 00021000
* SAMLIB 7E020000 7E02EFFF 0000f000
* ntdsapi 766F0000 76703FFF 00014000
* xpsp2res 63C00000 63EC4FFF 002c5000
* CLBCatQ 777B0000 77832FFF 00083000
* sqlncli 63ED0000 640F3FFF 00224000
* COMCTL32 77530000 775C6FFF 00097000
* comdlg32 00940000 00988FFF 00049000
* SQLNCLIR 64210000 64242FFF 00033000
* msftepxy 64AD0000 64AE4FFF 00015000
* xpsqlbot 64B30000 64B35FFF 00006000
* xpstar90 64F70000 64FB8FFF 00049000
* SQLSCM90 64FD0000 64FD8FFF 00009000
* ODBC32 64FF0000 6502CFFF 0003d000
* BatchParser90 65030000 6504EFFF 0001f000
* ATL80 7C630000 7C64AFFF 0001b000
Thanks for your help in advance.
Paresh Motiwala
EDS, Boston, USA
The other half of the error message is in the second message of the same thread below.
The file is located here:
Hello,
I have lost a table's contents and need to restore them urgently. I backed up the database. I selected the backup set in order to restore it, but the "Point in time restore " was disabled and I couldn't select it to set the time to which to restore.Could anyone tell me the reason behing that?
Another interesting thing is that when I backup a database, I only have two options for backing it up,
1. database complete
2. database differential
Thanks a lot,
Joe
hey guys
i need help urgently
i just ran an update statement without a where statement by mistake
and i need to rollback this changes
i;m runnning sql express sp2
and the database is set to recovery model simple
i hace the mdf and ldf file
the mdf is 1.5 gb ledf is 65 mb and the last changed date is the same time i ran the update statement
so i think the changes are there in the ldf file but i just need to roll back to 1 minute b4 i run the update
plz helpppppppppppp
thx in advance
I'm running SQL 2000 SP4 on a patched Windows 2003 SP2 server.
I keep getting the error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 11/14/2007
Time: 3:51:13 AM
User: N/A
Computer: HOST20
Description:
Error: 0, Severity: 19, State: 0
SqlDumpExceptionHandler: Process 57 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
Any idea what this is or what to do to fix it?
Hi Guys,
How are you. i hope you all are having fun.
well i have an issue on one of the production box.
Version of the box: Microsoft SQL Server 2000 - 8.00.2187 (Intel X86) Mar 9 2006 11:38:51 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
As per SQL serve logs which i received couple of times.
step 1) Using 'dbghelp.dll' version '4.0.5'
*Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump0173.txt
2) SqlDumpExceptionHandler: Process 3920 generated fatal exception c0000005
EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
3) Stack Signature for the dump is 0xC578316D
when i searched in google and msdn i could not found the exact solution.
if you guys have the knowledge and also got experianced about this issue.
kindly please help me in this regards and one more thing i just want to inform you all this is our production server.
I think you would understantd how criticality is this.
I really appreciate for your feedback. thank you so much,
Raghu
for the 2nd step it is haing a very huge message.
so here i have pasted some part of the message. i think this is more then enough for you all.
SqlDumpExceptionHandler: Process 3920 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 01/17/08 15:30:57 spid 97
*
* Exception Address = 0041656B
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred writing address 00380008
* Input Buffer 124 bytes -
* EXEC MIS..law_ac_totals "G&A", 2008, 3, 100, 204, "emferrario"
*
*
* MODULE BASE END SIZE
* sqlservr 00400000 00CBEFFF 008bf000
* Invalid Address 77F80000 77FFBFFF 0007c000
* ADVAPI32 7C2D0000 7C334FFF 00065000
* KERNEL32 7C570000 7C623FFF 000b4000
* Invalid Address 77D30000 77D9EFFF 0006f000
* MSVCP71 7C3A0000 7C41AFFF 0007b000
* MSVCR71 7C340000 7C395FFF 00056000
* opends60 41060000 41065FFF 00006000
* SHELL32 7CF30000 7D175FFF 00246000
* GDI32 77F40000 77F7BFFF 0003c000
* USER32 77E10000 77E6EFFF 0005f000
* SHLWAPI 70A70000 70AD5FFF 00066000
* msvcrt 78000000 78044FFF 00045000
* COMCTL32 71710000 71793FFF 00084000
* sqlsort 42AE0000 42B6FFFF
select * from sysprocesses
How can I determine whether a process a system or user?
I have a very simple SSIS package which I execute from VB.NET using the ManagedDTS namespace objects. I am getting a very sporadic error saying "The script threw an exception. Object reference not set to an instance of an object"
All the package does is insert rows from a filename that I pass into the package from code, and then rename the file in a script task. The script task is what is causing this error. If I remove/disable the script task the package executes everytime without error. I have even commented out all the code that might throw an exception and it still fails atleast 3 out of 10 times. Here is my code in the script task:
Public Sub Main()
'
' Add your code here
'
Dim e As String = ""
Dim strFileName As String = ""
Dim strDestination As String = ""
Try
'strFileName = Dts.Variables("User::FileName").Value.ToString()
'strDestination = System.IO.Path.ChangeExtension(strFileName, "processed")
'If File.Exists(strFileName) Then
'System.IO.File.Move(strFileName, strDestination)
Dts.TaskResult = Dts.Results.Success
'End If
Catch ex As Exception
e = ex.Message
Dts.TaskResult = Dts.Results.Failure
End Try
'CreateControlFile(strFileName, strDestination, e)
End Sub
NOTE: I never get a package FAILURE as I would if it got into the CATCH block. I believe this is an error being generated from the Package processing engine.
Here is some output from the VB.NET application debug window:
This output's once for every "exception" thrown by each package execution.
A first chance exception of type 'System.NullReferenceException' occurred in VBAssembly
A first chance exception of type 'System.NullReferenceException' occurred in VBAssembly
A first chance exception of type 'System.IO.IOException' occurred in mscorlib.dll
Here is the code I use to execute the package:
Public Function ConsumePackage(ByVal strPath As String, ByVal strPackage As String) As Boolean
Dim bReturn As Boolean = False
Dim pkg As New Package
Dim app As New Application
Dim result As DTSExecResult = DTSExecResult.Failure
Try
pkg = app.LoadPackage(strPackage, Nothing)
Debug.Print("Executing package on file: " + strPath)
pkg.Variables("FileName").Value = strPath
result = pkg.Execute()
If result = DTSExecResult.Failure Or result = DTSExecResult.Canceled Then
For Each d As DtsError In pkg.Errors
ErrorMessage += d.ErrorCode.ToString() + d.Description.ToString() + vbCrLf
Next
Return False
End If
bReturn = True
Catch ex As Exception
bReturn = False
Finally
pkg.Dispose()
pkg = Nothing
app = Nothing
End Try
End Function
Where can i get the full error when viewing the report in visual studio...
"An unexpected error has occurred (Exception from HRESULT: 0x800300FD (STG_E_UNKNOWN))
This seems strange.. I am using a cube.. and the second I drag certain field to the grid in the query designer it crashes. When I take that field out its fine.. in my report I have NOTHING. just an empty report with a dataset.
please help.. urgent!
Regards,
Neil
Aaaaaarrgghh ! (that's better)I am trying to convert a field within my Oracle 9i Database that is oftype BLOB (but this BLOB may contain a combination of clobs/varchars orimages such as gif images, jpg images) to Microsoft SQL Server 2000using Microsoft DTS.On trying to perform this simple conversion I recieved the error "Needto run the object to perform the operation - Exception AccessViolation" from Microsoft DTS and my table that contains this BLOBfield is not converted across.After further investigation I implemented the fixes suggested by theMicrosoft Knowledge Base and "sqldts.com" but still no joy the errorkept occuring.I discovered my modifying the step in the DTS package that handled thistable conversion that contained the BLOB column that when I changed thedata type on my SQL Server target table to VARBINARY and modified thequery so that only the BLOBs that contained clobs/varchars were broughtacross that the error went away.I then proceeded to create another DTS package step that had a querythat only brought across the BLOB column that contained images such asgif images/jpeg images etc. and the error went away and the target typefor the SQL Server target table was set to IMAGE.As the data for this BLOB contains a combination of VARCHARS/CLOBS(concatanted) and also GIF IMAGES/JPEGS in the same source column withOracle 9i I require the same in my target table within SQL server asone column (and I should be able to do that with type IMAGE especiallyas it can store larger objects than VARBINARY but any source BLOBS thatcontain VARCHAR/CLOBs don't seem to want to be loaded as IMAGE theywill only load in to VARBINARY).However judging by my experiences above this doesn't seem to bepossible ?Can anyone help me out with this ?I am on Microsoft SQL Server 2000 Service Pack 4 with latest MDAC(2.8.1).Cheers,Gary
View 1 Replies View RelatedGot windows Vista Business edition, installed Visual Web Developer Express, SQL Server 2005 Express SP2, SQL Server Management Studio SP1 in that order. I was developing in VWD express without problems using WinXP but now on Vista Business, the local connection to SQL server appears to be a problem.
I know there's nothing wrong with my web.config or anything like that as it was working perfectly prior to running under Vista. If i specify the database on the live website, it works fine. If I specify the test database in app_data folder, I get the following exception:-
Server Error in '/UKSD' Application.
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +736211
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1959
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +237
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +374
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +192
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlRoleProvider.GetRolesForUser(String username) +771
System.Web.Security.RolePrincipal.IsInRole(String role) +272
System.Web.Configuration.AuthorizationRule.IsTheUserInAnyRole(StringCollection roles, IPrincipal principal) +120
System.Web.Configuration.AuthorizationRule.IsUserAllowed(IPrincipal user, String verb) +300
System.Web.Configuration.AuthorizationRuleCollection.IsUserAllowed(IPrincipal user, String verb) +191
System.Web.Security.UrlAuthorizationModule.OnEnter(Object source, EventArgs eventArgs) +3509206
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.312; ASP.NET Version:2.0.50727.312
I am taking a guess it's somerthing to do with access issues, but can't find anything out on searching the forums etc..
I am setup as an administrator, running VWD as an administrator and for the record, SQL Server Management Studio express works fine.
Another small issue, when I run the application from VWD, I always have to minimise the application and restore it as the graphics get corrupt.
Please help!! I cannot debug when running of the live website.
As a starter i tried to modify and translate the Personal Website Starters kit from the VS2005Team SDK.
When i'm working on the machine were it's installed , under debugging, all works great.
But when i try to develop from my laptop, via RDP on the develop machine, i've got this message and can not debug (connect to the SQLxpres Server)
Does anybody now a solution ??
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Source Error:
Line 5: Sub Application_Start(ByVal sender As [Object], ByVal e As EventArgs)
Line 6: AddHandler SiteMap.SiteMapResolve, AddressOf Me.AppendQueryString
Line 7: If (Roles.RoleExists("Administrators") = False) Then
Line 8: Roles.CreateRole("Administrators")
Line 9: End If
This is the connecting string
<add name="Personal" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Personal.mdf" providerName="System.Data.SqlClient" />
<remove name="LocalSqlServer"/>
<add name="LocalSqlServer" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|aspnetdb.mdf" />
my web app was working fine but as soon as i added in a page and few store procedures and 2 tables it just pop up with that error message.
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
i did go into the folder C:Documents and SettingsdnguyenLocal SettingsApplication DataMicrosoftMicrosoft SQL Server Datasqlexpress and delete the directory but this didnt help much. I still get the same error message. please help
Hello,
I have just reinstalled windows xp pro with service pack 2 and framework 2.0.
I am using SQL Express and visual studion 2005.
I am trying to run my website and i keep getting this error message, i followed few instructions but i still failed to make it work. could someone who faced similar issues guide me,
thanks
MM
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Source Error:
Line 112: Public Overridable Property Theme() As String
Line 113: Get
Line 114: Return CType(Me.GetPropertyValue("Theme"),String)
Line 115: End Get
Line 116: Set
Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunitedeecd65d2e1a6a798App_Code.ws-dzmjl.6.vb Line: 114
Stack Trace:
[SqlException (0x80131904): Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.]
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +437
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +766
System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428
System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +410
System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117
System.Configuration.SettingsBase.get_Item(String propertyName) +89
System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36
System.Web.Profile.ProfileBase.get_Item(String propertyName) +68
System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4
ProfileCommon.get_Theme() in C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunitedeecd65d2e1a6a798App_Code.ws-dzmjl.6.vb:114
Wrox.Web.GlobalEvents.ThemeModule.app_PreRequestHandlerExecute(Object Sender, EventArgs E) in C:WebsiteWroxUnitedApp_CodeThemeModule.vb:30
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832