I'm in a middle of a project where replication established between Oracle 8i and SQL server 2005. Now we need to drop one column from on of the tables replicated from Oracle side. My question : Is there anyway I can do this in Oracle and automatically reflected on SQL server? If not what is the proper steps to do it. Realy appreciate your fast response.
Regards
First of all; My Oracle publication works fine when I don't explicit specify the shema_option parameter for the articles I'm adding to the publication. The reason why I then want to explicit specify the parameter is as following.
I'm developing a replication solution to get data from our production server (Oracle) to our Data Warehouse (SQL Server). The SQL Server (and the Data Warehouse code) uses the SQL_Latin1_General_CP1_CI_AS collation. When I don't explicit specify the schema_option, the nvarchar columns of the replicated tables are created using the SQL_Latin1_General_CP1_CS_AS collation and this results in some comparison errors, when for instance a select statement is trying to compare two nvarchar strings using different collations.
I've tried to specify the schema_option parameter as "@schema_option = 0x80" (Replicates primary key constraints.) to avoid the use of the SQL_Latin1_General_CP1_CS_AS collation when creating the destination tables - I'm not sure it's enough? No matter what, I'm getting an error when I'm doing it (see below).
Message
2006-07-13 12:00:15.529 Applied script 'ITEMTRANSLATION_2.sch'
2006-07-13 12:00:15.544 Bulk copying data into table 'ITEMTRANSLATION'
2006-07-13 12:00:15.544 Agent message code 20037. The process could not bulk copy into table '"ITEMTRANSLATION"'.
2006-07-13 12:00:15.591 Category:NULL
Source: Microsoft SQL Native Client
Number: 208
Message: Invalid object name 'ITEMTRANSLATION'.
2006-07-13 12:00:15.591 Category:NULL
Source:
Number: 20253
The questions are now whether I actually have a schema_option alternative for Oracle Publishing? If so, what is the solution, and eventually how can I avoid the error stated above?
If I'm not able to avoid the article columns getting created with the "wrong" collation, is there then any other obviously solution to the problem?
Thanks!
Best regards,
JB
Some replication jobs failed and it shows 'data conversion failed' error MSSQL_REPL20037. Any idea on it ? I can't find the error in online book. THanks in advance!
View 11 Replies View RelatedHi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
We have a publication from database a to database b. Database a containts table1 to be published to databasae b. Database b contains a publication of table1 to database c. When we go to rerun the publication from database a it errors saying cannot drop table1 since it is part of database b's publication. how do you do this.
Thanks in Advance,
Phillip M. Triocli
Hi There
View 4 Replies View RelatedI am attempting to drop a database (sales), however I receive this message: Error 3274 is "Cannot drop the database 'sales' because it is published for replication." Yet, I no longer have any publications in this database. It seems that there is some orphaned information related to a publication that existed. Any help would be great.
View 2 Replies View Relatedhi ,
this is my first post on MS Forums .
Q: my question is that , i want to format a date column .. d/m/yyyy .. but there is no any format facility ..
anybody can help me here ??
Hello All,
I created all the role and logins as described in oracleadmin.sql file and were able to query Oracle tables.
But when I try to crate publisher on Oracle server from sqL server I get the following error:
-------------------------------------------------------------------------------------------------------------------------------
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server+Management+Studio&ProdVer=9.00.3186.00&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'oracle_dev' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Failed to execute the HREPL.INITPUBLISHER request to Oracle Publisher 'ORACLE_DEV'. Verify that the Oracle package code exists on the Publisher, and that the replication administrative user account has sufficient permissions.
Changed database context to 'master'.
OLE DB provider "MSDAORA" for linked server "ORACLE_DEV" returned message "One or more errors occurred during processing of command.".
OLE DB provider "MSDAORA" for linked server "ORACLE_DEV" returned message "ORA-06550: line 1, column 8:
PLS-00201: identifier 'HREPL.INITPUBLISHER' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
".
Error: 7215, Sev: 17, State: 1, Msg: Could not execute statement on remote server 'ORACLE_DEV'. (Microsoft SQL Server, Error: 21651)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3186&EvtSrc=MSSQLServer&EvtID=21651&LinkId=20476
--------------------------------------------------------------------------------------------------------------------------------------------------------
I searched the web and could not find any related info, where is this package can I run it manually?
Any help appreciated.
I'm a consultant, and have been brought into the middle of a replication project. The client is looking to replicate the database from Oracle to SQL 2005. I had the replication working last week, but then problems (I don't know the cause, wasn't on site). But I tried reinitializing the subscription, and the SQL Log Reader Agent status simply sticks at status=Initializing for about 5 minutes.After 5 minutes, it comes up with the message:Batch processing is in progress. The current batch consists of 205065 commands and 0 transactions. The last transaction was 0x0000000000000000000c, '0x0000000000000000000c'.And the commands continue to increase at the rate of a couple thousand a minute. The distribution Agent isn't running, and I haven't created a snapshot. I do believe there were problems with disk space on both the Oracle and the SQL Server, but those have been taken care of. And the target database is only used for OLAP (at this point). I've run the Dist Cleanup Job, removed the Subscription and rebuilt it. To no avail. Unfortunately, I don't have a great access on the Oracle side of it. Thoughts? Bob
View 3 Replies View RelatedHello ,
I want to drop a table from a publication , so that i can copy some data from another server . After the copy , i want to add the article or the table back again to the publication without making any changes to the subscribers configuration .
Is it really possible on SQL 7.0 ? Right now it does not allow me to copy the data to the published table or even drop the article (table) and it says that the article is published for replication and cannot be dropped or modified .
The table is configured for transactional replication .
I will have to drop the entire publication and create all the subcribers again .
Any help in this regard please .
Sameer
Hi,
I'm using DMO (SQLOLE65.dll) to programmatically replicate selected publications. The Publication object supports a property called Enabled, which can be set to FALSE. I'm setting the enabled property to TRUE for those publications that need be replicated, and make the others FALSE. Still, all publications get replicated. [I give DoAlter to commit the changes i made.]
Any solution,Please mail me ASAP to venkateswaranb@synectics.soft.net
Thanks,
Venkat
I have one Oracle Server (Version 10g) with some simple tables which should be replicated to an SQL 2005 Enterprise Server.
i got this error:
Error messages:
The process could not bulk copy into table '"dbo"."S_AGRZ"'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20037)
Get help: http://help/MSSQL_REPL20037
Batch send failed
Violation of PRIMARY KEY constraint 'MSHREPL_38_PK'. Cannot insert duplicate key in object 'dbo.S_AGRZ'. (Source: MSSQLServer, Error number: 2627)
Get help: http://help/2627
To obtain an error file with details on the errors encountered when initializing the subscribing table, execute the bcp command that appears below. Consult the BOL for more information on the bcp utility and its supported options. (Source: MSSQLServer, Error number: 20253)
Get help: http://help/20253
bcp "RS"."dbo"."S_AGRZ" in "F:Microsoft SQL ServerMSSQL.2MSSQLReplDatauncACPRS2_DISTRIBUTION_S_AGRZ20070518023422S_AGRZ_2.bcp" -e "errorfile" -t"<x$3>" -r"<,@g>" -m10000 -SSVIESQL04RS2 -T -w (Source: MSSQLServer, Error number: 20253)
i set the publisher to drop the table and create a new one when i reinitialize with a new snapshot. it only works when i remove the unique key constraint. but after that the data in the replicated table has wrong entries. a select count ... will show the exacly same number as an select count ... on the original table direktly on the oracle server. i reinitialzied the replication multiple times with new snapshots. but the problem does not resolve. first i got a unique key constraint. then i typed truncate table ..., after that i removed the the unique constraint and than all data will be imported but there are some entries that are not existing in oracle.
my server is patched with the newest updates for sql 2005 (Version 9.0.3159).
for exempla the following statement will show the same results on oracle and sql 2005:
Oracle:
SELECT COUNT(*) FROM S_AGRZ
Result: 471.066
MS-SQL:
SELECT COUNT(*) FROM S_AGRZ
Result: 471.066
but, for example this will show differences:
Oracle:
SELECT * FROM S_AGRZ WHERE art_nr='C7972A'
Result:
ART_NR
AGRA_CD
AGR_CD
AGRZ_DTANLAG
AGRZ_USERANLAG
AGRZ_DTAENDG
AGRZ_USERAENDG
C7972A
HW
005
NULL
NULL
NULL
NULL
C7972A
KO
490
NULL
NULL
NULL
NULL
C7972A
R
KEIN
NULL
NULL
NULL
NULL
MS-SQL:
SELECT * FROM S_AGRZ WHERE art_nr='C7972A'
Result:
C7972A R KEIN NULL NULL NULL NULL
C7972A HW 005 NULL NULL NULL NULL
C7972A HW 240 NULL NULL 2007-05-11 09:13:19.000 SCHWARZJ
C7972A KO 490 NULL NULL NULL NULL
C7972A R AUT NULL NULL NULL NULL
C7972A KO 490 NULL NULL NULL NULL
The scripts for the tables:
Oracle:
CREATE TABLE S_AGRZ
(
ART_NR VARCHAR2(20 BYTE) NOT NULL,
AGRA_CD VARCHAR2(2 BYTE) NOT NULL,
AGR_CD VARCHAR2(15 BYTE) NOT NULL,
AGRZ_DTANLAG DATE,
AGRZ_USERANLAG VARCHAR2(10 BYTE),
AGRZ_DTAENDG DATE,
AGRZ_USERAENDG VARCHAR2(10 BYTE)
)
ALTER TABLE S_AGRZ ADD (
PRIMARY KEY
(ART_NR, AGRA_CD));
ALTER TABLE S_AGRZ ADD (
FOREIGN KEY (AGRA_CD)
REFERENCES S_AGRA (AGRA_CD));
ALTER TABLE S_AGRZ ADD (
FOREIGN KEY (AGRA_CD, AGR_CD)
REFERENCES S_AGR (AGRA_CD,AGR_CD));
MS-SQL:
USE [RS]
GO
/****** Object: Table [dbo].[S_AGRZ] Script Date: 05/18/2007 03:13:18 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[S_AGRZ](
[ART_NR] [nvarchar](20) NOT NULL,
[AGRA_CD] [nvarchar](2) NOT NULL,
[AGR_CD] [nvarchar](15) NOT NULL,
[AGRZ_DTANLAG] [datetime] NULL,
[AGRZ_USERANLAG] [nvarchar](10) NULL,
[AGRZ_DTAENDG] [datetime] NULL,
[AGRZ_USERAENDG] [nvarchar](10) NULL
CONSTRAINT [MSHREPL_37_PK] PRIMARY KEY CLUSTERED
(
[AGRA_CD] ASC,
[AGR_CD] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
does anyone know how to solve this problem?
Hi, everyone,
I am new in SQL server 2005. I had setup SQL server 2005 P2P replication. Somehow it did not work one of two way replication. I tried to delete the publication. However I could not do it. have the same problem. When I tried to delete the publication, I got the publication " " does not exist.[SQL server error: 20026]. I tried to use sp_droppublication, it gave me error "the database is not enabled for publication". Nevertheless, I can see the publication in MS SQL Management Studio and Publication monitor with OK status. I could not find the distribution database either.
Could you anyone has ideas to delete this publication? I am sorry I am not a programmer. Please give me more detail explanation if you can. Thanks.
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies View RelatedHi Mate !
I was searching to enable replication publication on my SQL 2005 Express, but as far as I look, this feature don't seem to be included.
Am I, correct?
Is there a way to enable this fearture?
Thanks
Zak
:mad:
I have one Publisher! (SQL 2005)
Two Subscribers. (SQL 2005)
Each subscriber requires different row filter from the published tables.
So, i need to create Two publications for each subscriber for the same db.
When i setup first publication, and apply filters to published tables.
All goes fine.
As soon i create an other publication with same published tables but DIFFERENT row filter; the log reader agent fails!
The process could not execute 'sp_replcmds' on 'DB1'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011)
Get help: http://help/MSSQL_REPL20011
Execution of filter stored procedure 2076702271 failed. See the SQL Server errorlog for more information. (Source: MSSQLServer, Error number: 18764)
Get help: http://help/18764
The Log Reader Agent failed to construct a replicated command from log sequence number (LSN) {0008443a:000003b5:003e}. Back up the publication database and contact Customer Support Services. (Source: MSSQLServer, Error number: 18805)
:confused:
I have tried to re-initialze the subscriptions and re-run snapshots but no luck.
As i remove the row filter from the second publication; log reader starts working fine.
Previously i was using Merge replication and all was going BUT, on very large DML on publisher, we use to receive deadlock errors on application.
I decided to use Tran repl instead because log reader reads the changes from tran-log instead of locking the published tables; NOW I AM STUCK!
Ideas please!!!!
I tried to drop a merge replication publication and it is giving me an invalid object name dbo.ms_mergeagents message. I tried to drop using:
SSMS
sp_dropmergepublication
sp_replicationdboption
I got the last two from Microsoft KB article 324401. The subscription was never created because it gave another error invalid object_name msmerge_subscriptions. I can create new publications but not drop the existing ones.
Please assist...
Hi,I am trying to use Enterprise Manager Wizard to create a newPublication database but I got the following message.Error 2812: Could not find stored procedureMyDB.dbo.sp_MSadd_logreader_agentThere seems that some replication stored procedures.Any help?Thanks in Advance
View 1 Replies View RelatedIs there an easy way to copy a replication publication definition from one server to another? In our environment we have a development environment, testing environment and soon a production environment. Right now keeping the replication definition between the development and testing environments is a manual process, are there tools that can do a diff on this or a way to keep this in sync?
For example when we change what information gets replicated in the development environment I need a way to propogate that change to the testing environment.
I know I can generate scripts from within SQL Server Management Studio, but it creates scripts very machine specific. So short of going through that and modifying the server names to match the different environments, is there a better way?
What's the relationship among replication, publication and subscription?
I want to create replication database, what things should I know first?
I am at my wits end here. For Replication the Books Online clearly state:
"The option to allow transformations is set at the time you create a publication"
However, I cannot find any options that allow me to do this in the Create Publication Wizard.
Once the Publication has been created I see in the Properties in the Subscription Options tab that "Use DTS to transform data before distributing it to a Subscriber" is set to No and there is no way to change it.
Where am I going wrong?
I am having a problem with merge replication after recreating a publication. It is a simple two-way replication between two servers allowing applications to update data at both ends, i.e. 1 publisher, 1 subscriber for all tables except some junk ones. The problem started after I did the following:
1) I dropped and recreated the publication to allow for some changes to the database schema. These caused problems so I dropped the subscription and publication and restored the databases at each end from backups taken before we started.
2) When I created the publication again, it wouldn't let me use the same name as it thought the publication already existed. It let me use a different name instead.
3) Most things work OK but one of the tables is not replicating inserts from the subscriber to the publisher. There are no errors and no conflicts, other similar tables replicate OK. Inserts go across the other way OK.
4) I am getting replication conflicts on another table that says 'Unable to synchronize the row because the row was updated by a different process outside of replication'
I believe the problem is to do with the original publication details still being in the restored databases, so am looking to drop the publication & subscription, remove the remnants of the old publication, fix the data and recreate pub & sub. What do I need to do to get rid of the old replication data in the database?
Any help much appreciated.
Hi,
I am stuck when trying to create a new publication. I fill all the wizard tabs but when finishing I get that message (6 times, one for every table):
Code Block
SQL Server Management Studio could not create article 'applicationModules'. (New Publication Wizard)
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
This article cannot use the 'subscriber_upload_options' feature because the publication compatibility level is less than 90. Use sp_changemergepublication to set the publication_compatibility_level of publication 'testMR' to '90RTM'.
Changed database context to 'test'.
Publication 'testMR' has the following property: 'compensate_for_errors'. SQL Server subscribers below version '8.00.0858' will ignore this setting. (Microsoft SQL Server, Error: 21522)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21522&LinkId=20476
The error seemed pretty clear, so I end up doing:
EXEC sp_changemergepublication
@publication = N'testMR',
@property = N'publication_compatibility_level',
@value = N'90RTM'
and running the wizard again.
But I got the same error.
The link on the message take me nowhere.
and by googling for error 21522 I couldn't find any help at all.
Please, could anyone help?
Cheers
I wanted to schedule the transaction replication. How do I do it? Currently I have set up a transaction replication which runs continuously and synchronizes the changes with immediate effect.
I need to configure a replication which will gather logs from the publication once in a day.
Is there any possibility?
Hello.I am trying to use Transact SQL to prepare publication for replication (SQL Server 2000 SP4 and SQL Mobile). I can easily create publication, add filters etc. but there is one thing which I can't find : parameter which tells me subscriber type and allow me to change subscriber type for publication. I don't know where I can change (or even if I can change) this property.
If someone made publication for mobile devices and replication with filters,resolvers etc. will it be a problem to share experiences here? Maybe some sample code with script or something what will guide me. Thanks in advance. Maciej Wysocki
I'm trying to setup merge replication and get the following error from the snapshot agent after I've finished the 'New Publication Wizard'. This doesn't make sense to me as it is an automatic process. Also, it looks like it is complaining about a 'dbo.MSmerge_cont...' view which is a view created automatically for the merge publication.
ERROR MESSAGE:
The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128.
FULL DETAILS:
Message: The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128.
Command Text: IF OBJECT_ID(N'[<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWCS464</ServerName><LoginName>NT AUTHORITYSYSTEM</LoginName><UserName>dbo</UserName><DatabaseName>liport2_gts</DatabaseName><SchemaName>dbo</SchemaName><ObjectName>MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90</ObjectName><ObjectType>VIEW</ObjectType><TSQLCommand><SetOptions ANSI_NULLS="OFF" ANSI_NULL_DEFAULT="ON" ANSI_PADDING="ON" QUOTED_IDENTIFIER="ON" ENCRYPTED="FALSE" /><CommandText>create view dbo.MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90 as select * from MSmerge_contents where 1 = 2</CommandText></TSQLCommand></EVENT_INSTANCE>]', 'V') IS NOT NULL DROP VIEW [<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWCS464</ServerName><LoginName>NT AUTHORITYSYSTEM</LoginName><UserName>dbo</UserName><DatabaseName>liport2_gts</DatabaseName><SchemaName>dbo</SchemaName><ObjectName>MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90</ObjectName><ObjectType>VIEW</ObjectType><TSQLCommand><SetOptions ANSI_NULLS="OFF" ANSI_NULL_DEFAULT="ON" ANSI_PADDING="ON" QUOTED_IDENTIFIER="ON" ENCRYPTED="FALSE" /><CommandText>create view dbo.MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90 as select * from MSmerge_contents where 1 = 2</CommandText></TSQLCommand></EVENT_INSTANCE>]
Parameters:
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteAdHocQueryDiscardResults(String strQuery, SqlConnection connection)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.GenerateSystemTableBcpFiles()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPostArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: 103)
Get help: http://help/103
Server XF4SWCS464, Level 15, State 4, Procedure , Line 1
The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128. (Source: MSSQLServer, Error number: 103)
Get help: http://help/103
I have an existing publication in sql 2012 with 2 articles, and then I add 2 more articles. After that when I generate a snapshot, will the snapshot be generated for 2 new articles only or for all 4 articles?
I remember adding 1 new articles to one existing publication with 150 articles and when I generated snapshot, it was generated only for 1 article. But I don't remember clearly.
Does it behave differently for small and large number of articles?
-----Table Proc Index Performance TSQL &&%$#@*(#@$%.......------------
I have transactional replication configured where the publisher and subscriber are on two different servers. Yesterday a database upgrade was carried out, and the DBA dropped replication by issuing sp_removedbreplication on the published database. The subscription is still set up.
I have two questions:
1 - What is the safest way to temporarily switch off replication without losing the publication or subscription? As far as I was aware (my replication knowledge isn't great), simply disabling the relevant agents would do the job.
2 - I now have the task of creating the publication again (fortunately we have a saved script). If I recreate this publication, will I be able to point the existing subscription at it?
I have to drop foreign key constraint from one table. How can I do that? Is it possible?
Also,
Is it possible to add a foreign key constraint on the table once it has a data?
Hi,
Any body please give me any reference to the C# code, how to drop a database on SQL SERVER CE.
thanx and regards
ramesh chandra
Hi,
We have an issue with our replication configuration when viewed through replication monitor. Parameterised Filters and joined filters don't appear in the gui. However, when we script the publication all the filters are present.
This issue only seems to occur when we have a remote distributor.
I should also point out that we have a merge push topology that uses a custom RMO synchronisation component on a separate server to either the publisher or the distributor. Also all the databases in the topology are called the same name. This has caused us other issues relating to this topology in particular so I raise it here as well although I don't expect it to be the case in this instance.
Any help would be greatly appreciated in clarifying this matter.
I have a table with a identity column in sql server 7 database. Now i need to update this identity column. Directly i couldn't able to update this column since it is an identity column. So, i like to drop this identity nature first and then update it is easy to update it. For this purpose, I need a Transact-sql script. Please Let me know if you have any thoughts on this. Thanks.
View 5 Replies View Related