URGENT: Disable And Enable The Constraints
Dec 12, 2000
Hi everybody,
Is there any procedure or option to disable and enable constraints on database.the problem is we are having lot master and child tables. when i am trying to move the entire data from original db to another same db, there i am getting constraints problem. child tables are not accepting data with out loading the master tables.
is there any to disable and enable constraints? please give me reply asap
Thanks in advance
Giri
View 3 Replies
ADVERTISEMENT
Jan 9, 2007
I know this is probably a flick of a switch but I cannot figure out which switch. Setup is SQL Server / Stored Procedures / DAL / BLL(skipped for testing) / PL. The stored procedure queries from only one table and two columns are ignored because they are being phased out. I can run the stored procedure and preview the data in the DAL but when I create a page with an ODS linked to the DAL and a GridView I get this error. I checked every column that does not allow nulls and they all have values. I checked unique columns (ID is the only unique and is Identity=Yes in the table definition). I checked foreign-key columns for values that are not in the foreign table and there are none. Any ideas why do I get this?
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
View 3 Replies
View Related
Jan 17, 2008
Hi,
I am getting the above error when trying to load a report into my Web Application, I have tracked the error down to one specific field in my database. Even though this field is a NVarChar field and is of size 30 it would seem that there is an issue returning the value from the field. I can write it into the database no problems but when I try to get it out of the database it returns the above error.
e.g
MOB 401.908.804 - Fails
0401.907.324 - okay
8239 9082 (pager) - fails
Anyone got an idea on how to fix this????
Regards..
Peter.
View 7 Replies
View Related
Nov 17, 2006
Hello there :-)
Kindly help me find the answer on how to enable and disable the identity of a field on a table via SQL Script?
Thanks :-)
View 1 Replies
View Related
Jan 9, 2007
Hi, is there a way how to enable / disable logging on web merge synchronization into the file websync.log? The file exists in the ISAPI folder, on some machines there are some messages, on others there is nothing. There are Timeout messages on the client during synchronization and we need to find where is the problem, if it is on the server side or if it is a network error or something else.
Thanks, Pavel
View 8 Replies
View Related
Feb 20, 2004
Hi,
I use a SQL Server 2000.
Is there a chance to change the case sensitivity option for a running instance of sql server?
I know, during the install process, i can activate the case sensitivity. But can I change this option on an already installed server (to case sensitiv or back)?
Thanks
View 4 Replies
View Related
Jul 3, 2014
How can one enabledisable Availability Group listener? I know AG listener can be deleted and added but didnt find anything to disable or enable that.
View 1 Replies
View Related
May 25, 2015
I have a trigger that I disable so I can do some operations on a table.
After the operations are completed I do the enable using the enable trigger comand.
Do I need to do something else to put back the trigger working as it was before the disable comand?
View 3 Replies
View Related
May 11, 2007
Is there a way to turn on/off a given logger dynamically across the board, and still enable the logging of task specific events, like "ExecuteSQLExecutingQuery" from the ExecuteSQL task or "WMIDataReaderOperation" from the WMI Data Reader task?
The use case is one where multiple loggers are defined in a package (custom and stock) and I'd like to toggle the execution tracing on a per logger basis.
I realize "logger toggling" can be done programmatically, but I'm wondering if that's the only way to accomplish the objective.
View 3 Replies
View Related
Sep 19, 2007
Hello,
I am a beginner in SQL Server Reporting Services.
My report has three parameters; all with the same characteristics (combobox (multiple values, datatype: String, Available values: from query, default value:null).
When i am in the Preview Tab of the Report, the combo box of the first parameter is enabled, the combo box of the second parameter is disabled.
Once i select a value for the first parameter, the combo box of the second parameter becomes enabled.
I would like to select a value for the the second parameter in spite i did not select a value for the first parameter.
I do not find a solution in the properties of the parameters.
How can I do it ?
Thanks and sorry for my english
View 1 Replies
View Related
May 29, 2008
Hello, is possible Enable or disable constrains in a defined schema? or Alter constrains in a defined schema.
For example in schema1 for user1 the constrains definitions are enabled.
There are another schema called schema2 for user2 and constrains definitions are disabled.
Thanks.
View 1 Replies
View Related
Mar 31, 2006
Is it possible to run a trigger whenever a SQL user is disabled or enabled? From what I've seen of various sysusers and syslogins tables there isn't a column that represents enabled or disabled.
View 6 Replies
View Related
Jul 31, 2006
I have to admit I'm pretty new to ASP.net.
I'm trying to insert a row of data into my SQLExpress database table "Prets"
I'm getting the user_ID from the table "Membres"
Here's the code I have:
Imports System.Web.UI.PageImports System.Security.PrincipalImports WiseNetTableAdaptersPartial Class membre_sec_Pret_demande_pret Inherits System.Web.UI.Page Protected Sub submit_btn_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submit_btn.Click Dim User As String = My.User.Name Dim pretAdapter As New PretsTableAdapter Dim membreAdapter As New MembresTableAdapter pretAdapter.AjouterPret(Convert.ToInt32(membreAdapter.GetUserIDbyName(User)), Convert.ToDecimal(montant_txt.Text), Convert.ToString(raison_txt.Text)) End SubEnd Class
And here's the error I get at runtime:
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.Source Error:
Line 1610: }
Line 1611: WiseNet.MembresDataTable dataTable = new WiseNet.MembresDataTable();
Line 1612: this.Adapter.Fill(dataTable);
Line 1613: return dataTable;
Line 1614: }Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswisenetindustriesafc388c716067f12App_Code.tyietv41.0.cs Line: 1612 Stack Trace:
[ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.]
System.Data.DataTable.EnableConstraints() +1820725
System.Data.DataTable.set_EnforceConstraints(Boolean value) +39
System.Data.DataTable.EndLoadData() +138
System.Data.Common.DataAdapter.FillFromReader(DataSet dataset, DataTable datatable, String srcTable, DataReaderContainer dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +218
System.Data.Common.DataAdapter.Fill(DataTable[] dataTables, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +318
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +221
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
WiseNetTableAdapters.MembresTableAdapter.GetUserIDbyName(String nom) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswisenetindustriesafc388c716067f12App_Code.tyietv41.0.cs:1612
membre_sec_Pret_demande_pret.submit_btn_Click(Object sender, EventArgs e) in c:inetpubwwwrootWiseNetIndustriesmembre_secPretdemande_pret.aspx.vb:12
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 1 Replies
View Related
Apr 15, 2007
Hello there, I have a table under SQL2005 express with 8 fields with a primaryKey defined.In my BLL in the table adapter there is one "SELECT DISTINCT prodCAT from prods" The prodCAT is a nvarchar(50) and it is not part of an index or primaryKey.When I preview the data from my BLL I get the correct data.I defined a new web form (aspx) and put a ddl (dropDownList) with an objectdataSource that relates to the above sql function/command and I get a"Failed to enable constraints. One or more rows contain values violating
non-null, unique, or foreign-key constraints." BTW when I defined the above SQL in the BLL I got a "The new command text makes the function return data with schema different from the schema of the main query" Any suggestions???
View 8 Replies
View Related
Aug 25, 2003
does anyone had any idea on the following codes that i'm facing?i have no ideas what is constraints and i hardly can view my page. In addition to that, i also faced the same problems when i'm trying to change my user password. it eventually managed to change the password but then the changes leads to the failed to enable constraints too. however, the following codes is not related to the change password but the purchase item. Hope someone can help me up! thanks!
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Source Error:
Line 223: SqlDataAdapter2.SelectCommand.ExecuteNonQuery()
Line 224: SqlConnection1.Close()
Line 225: SqlDataAdapter2.Fill(BuyData2)
Line 226: i = BuyData2.BuyView.Count
Line 227: For n = 0 To i - 1
Source File: C:InetpubwwwrootegBuy.aspx.vb Line: 225
Stack Trace:
[ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.]
System.Data.DataSet.FailedEnableConstraints() +19
System.Data.DataSet.EnableConstraints() +519
System.Data.DataSet.set_EnforceConstraints(Boolean value) +31
System.Data.DataTable.EndLoadData() +300
System.Data.Common.DbDataAdapter.FillFromReader(Object data, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +260
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +129
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
eg.Buy.Page_Load(Object sender, EventArgs e) in C:InetpubwwwrootegBuy.aspx.vb:225
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 4 Replies
View Related
Jan 3, 2002
hi folks,
How to disable/enable an Identity Column in a table with the help of an sql
statement.
Thanks in advance.
Vineet Agarwal
View 1 Replies
View Related
Apr 9, 2002
I have transaction replication setup on two SQL7 boxes and a nightly job runs a procedure that need to alter a table and disable a trigger. Since replication has been set up the disable doesn't work. Any way around this.
View 2 Replies
View Related
Oct 25, 2015
the disable trigger will be enable again.Because I already disable the trigger on last month, but when I check through the database, it enable again.I understand that, when we restore the database, all the trigger will be enable.How about SQL Cluster? will it enable the trigger??
View 3 Replies
View Related
Apr 24, 2008
Hi,
I have a package with 3 different tasks.
Like:
1. Execute Sql Task
2. Execute Sql Task
3. Execute Sql Task
4. Execute Sql Task
ESQL1 will get max(id) from table and then based on the ID the remaining needs to be work.
Ex:
If the ID=AUS-Sdy-1
then ESQL2 will update the tbl1 and return one IDkey based on this return key the ESQL3 will
update a tbl2. ----------*( i want to disable ESQL4)
else
If the ID=AUS-Sdy-2
then ESQL3 will update the tbl1 and return one IDkey based on this return key the ESQL4 will
update a tbl2. ----------- *(i want to disable ESQL2)
Thanks
Thiru
View 5 Replies
View Related
Sep 16, 2015
How can we create a checkbox in SSRS and how can it be enabled disabled based on the value.
View 5 Replies
View Related
Nov 22, 2006
Hi,
I currently have serverA importing data from an AS400 oledb connection and serverB on hot-standby as a mirror. The data import is being performed via an SSIS scheduled job.
I've yet to implement any solution in the following case:
If the database on serverA fails, it will failover to the mirror. But the jobs will still be on serverA. Ideally, I'm assuming the jobs should not run on serverB since it will be attempting to update the mirrored database. So, I am wondering if both servers can have identical copies of SSIS packages and jobs and simply (?) enable or disable them based on which server will be hosting the principal database.
Is there any solution where the jobs can automatically be disabled on the server with the mirrored database and enabled on the principal database depending on its status?
View 4 Replies
View Related
Feb 28, 2006
Hi,
I have two tables (Accounts and Contacts) that have a many-to-many relationship, maintained by the AccountContactLinks table.
I would like to populate a Contacts DropDownList with all of the Contacts associated with the Account Selected in Accounts DropDownList.
Here is the (SP) SQL Query I'm trying to make work:
SELECT Contact.ContactID, Contact.ContactLastName, Contact.ContactFirstName, Contact.ContactLastName + ', ' + Contact.ContactFirstName AS ContactName FROM Contact INNER JOIN AccountContactLinks ON Contact.ContactID = AccountContactLinks.ContactID WHERE (AccountContactLinks.AccountID = @AccountID) ORDER BY Contact.ContactLastNameEND
I keep getting the following error:
Failed to enable constraints. One or more rows contains values violating non-null, unique or foreign key constraints.
I haven't implemented any non-null, unique or foreign key constraints between any of these tables, so suspect that I've got the SQL Query wrong.
Thanks very much.
Regards
Gary
View 5 Replies
View Related
Apr 7, 2008
ALTER PROCEDURE NEW
(
@tablename sysname = null,
@nvalue varchar(10) = null,
@ovalue varchar(10) = null
)
As
Declare @TABLE_NAME sysname
Declare @CONSTRAINT_NAME sysname
Declare @employeenosysname
declare @sql sysname
Declare c1 Cursor for
select TC.table_name, TC.constraint_Name from INFORMATION_SCHEMA.TABLES T
left outer join INFORMATION_SCHEMA.TABLE_CONSTRAINTS TC
on T.table_name=TC.table_name where T.TABLE_TYPE ='BASE TABLE'
open c1
Fetch next from c1 into @TABLE_NAME, @CONSTRAINT_NAME
while (@@Fetch_Status=0)
begin
--PRINT 'MED_FKEYS---' + @TABLE_NAME + @CONSTRAINT_NAME
if (@CONSTRAINT_NAME is null)
begin
/* If neither primary key nor foreign key table names given */
raiserror ('No Constraints' ,-1,-1)
end
else
select @sql='select' +@employeeno+' = EMPLOYEENO from'+ @TABLE_NAME
EXEC (@SQL)
if (@employeeno = NULL)
begin
/* If neither primary key nor foreign key table names given */
raiserror ('No EmployeeNo : ' ,-1,-1)
end
else
/*Disable the triggers and constraitns*/
SELECT @SQL='ALTER TABLE '+ @TABLE_NAME + ' DISABLE TRIGGER ALL'
EXEC (@SQL)
select @sql='ALTER TABLE '+ @TABLE_NAME + 'NOCHECK CONSTRAINT'+ @CONSTRAINT_NAME
EXEC (@SQL)
--select @sql='UPDATE '+ @TABLE_NAME+' SET EMPLOYEENO = '''+@nvalue+ ''' WHERE EMPLOYEENO = '''+ @ovalue +''''
--EXEC (@SQL)
select @sql='ALTER TABLE '+ @TABLE_NAME + 'NOCHECK CONSTRAINT'+ @CONSTRAINT_NAME
EXEC (@SQL)
SELECT @SQL='ALTER TABLE '+ @TABLE_NAME + ' ENABLE TRIGGER ALL'
EXEC (@SQL)
/*Enable the triggers and the constraints */
Fetch next from c1 into @TABLE_NAME, @CONSTRAINT_NAME
end
close c1
deallocate c1
return
GO
This procedure above gives me error
Line 1: Incorrect syntax near CONSTRAINT name.
Incorrect syntax near the keyword 'KEY'
Warning:
The table name has been created but its maximum row size (10760) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
Can Anyone pls help
View 1 Replies
View Related
May 25, 2007
Hi,
I'm using MsSql 2000 data base, how to enable and disable user in mssql 2000 version
View 3 Replies
View Related
Jun 26, 2007
I have a parameter for each field that lets me know if a field can be sorted or not.
What I want to be able to do is turn on or off interactive sorting for that column based on that parameters value.
In the dialog you have a check box that says enable interactive sorting. When that is clicked it appears that you get the two arrows no matter what you put in the expression.
I have tried
=IIF(allowSorting,Fields!myColumn.Value,"")
and
=IIF(allowSorting,Fields!myColumn.Value,Nothing)
but both result in the arrows still being there, just the sort doesn't work.
Is it possible to put an expression on the sort arrows appearing at all?
View 3 Replies
View Related
Feb 8, 2008
I want to restrict report builder access only to a reporting alias and block for other users.
Please suggest the solution
View 3 Replies
View Related
Sep 20, 2007
Hi,
Anybody now how to this programmaticly ? in registry or TSQL statement ?
View 3 Replies
View Related
Sep 11, 2006
Hi, I am trying to use a typed dataset created using the Query builder which returns the data correctly when I use 'Execute Query' in query builder but as soon as I attempt to return a dataset using the GetData method created I get the following error: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints. Which is not very helpful, any ideas where the problem may be? I have tried switching off enforce constraints and setting the NullValue property of all strings to 'Emtpy' bu that has no effect. Thanks in advance
View 2 Replies
View Related
Nov 10, 2015
How can i Trace Database Audit specification Enable and Disable. i want to maintain log for enable or disable database audit specification.
View 4 Replies
View Related
Sep 14, 2015
Is there a way to make the View Report disabled or enabled if certain condition exists?
View 3 Replies
View Related
Aug 29, 2007
HI all,
I would like to ONLY allow using SQL Server authentication and restrict Windows Authentication. At the moment, i set the security to "SQL server and windows authentication". Now, even though i set the password for "sa", i can ignore the SQL Server authentication and just use Windows authentication to manipulate database objects???
can anybody give some suggestions to restrict windows authentication and allow sql server authentication?.
Thanks in Advance
Best Regards
Ihsan
View 1 Replies
View Related
Jul 13, 2015
I have 2 dbs (SQL 2012) - one contains a trigger that is enabled/disabled by a procedure in the other database. This all works fine.
If I create a Database Project solution in Visual Studio 2012 SSDT (or 2013) for both databases, the stored procedure generates a SQL71502 stating that my trigger name can't be resolved.
To recreate the issue:
CREATE DATABASE DbWithTrigger
GO
USE DbWithTrigger
GO
CREATE TABLE dbo.TblWithTrigger(
Id int NULL,
SomeValue varchar(30) NULL
[code]....
-- Test to confirm
EXEC CrossDbTriggerCall
INSERT DbWithTrigger.dbo.TblWithTrigger VALUES(1, 'Blah blah')
In Visual Studio 2012:
1. Create a new solution with a project named DbWithTrigger
2. In project settings set the Target platform to SQL 2012
2. Import the DbWithTrigger db into this project
3. Create a new project named DbCallsTrigger
4. In project settings set the Target platform to SQL 2012
5. Import the DbCallsTrigger db into this project
6. Add a Database Reference in DbCallsTrigger for DbWithTrigger
When you build the solution both dbs build successfully, however there are two warnings. One is easily resolved by replacing DbWithTrigger in the body of the procedure with [$(DbWithTrigger)] (db variable name for the reference) but I can't find out how to get rid of the other. Is it a bug?
View 1 Replies
View Related
