URL Access Directly To Subscription Page Of A Perticular Report.
Dec 18, 2007
Hi,
I have a .net application in this application I want to call directly subscription page of a perticular Report through URL.
And i want to hide the header section too.Is it possible
If not how can i provide this feature of subscription in my application
Regards
View 1 Replies
ADVERTISEMENT
Nov 29, 2007
Hi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.
View 9 Replies
View Related
Jul 6, 2015
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related
Dec 6, 2007
Hi,
Is possible to get a report directly from excel or I must develop an tools for that?
Fredo
View 4 Replies
View Related
May 5, 2008
Hi all
I am using local reports.(.rdlc files)
My requirement is when the user selects some options in the form and click on Submit buttion,He should get report in PDF format directly.Is it possible?if possible give me some example code.No need to preview in general format.
Help me.
Regards.
View 3 Replies
View Related
Oct 18, 2006
The code below is a class file done in vb.net. The original idea came from reading this forum and some blogs.
To use the code below, you can create a windows application or service.
then create a class file and drop this code in it.
Remeber to reference the 2005 report execution service and also in the program settings include the path to your server.
IE: ReportExecutionService = http://localhost/ReportServer/ReportExecution2005.asmx or whatever your server URL is at.
Setup the public properties for printername (sharenames work fine), Number of copies and Report name.
That is all there is to it. This code is REALLY expandable to add more options.
Please remember to let me kow if you like this.
Imports System
Imports System.Drawing
Imports System.Drawing.Imaging
Imports System.Drawing.Printing
Imports System.IO
Imports System.Web.Services.Protocols
Imports PrintReport.ReportExecution
Imports System.Runtime.InteropServices ' For Marshal.Copy
Namespace PrintReport
Friend Class app
Private m_sPrinterName As String
Private m_sReportName As String
Private m_sNumCopies As Integer
<STAThread()> _
Public Sub Main(ByVal args As String())
Dim pe As PrintMain = New PrintMain()
pe.PrintReport(m_sPrinterName, m_sReportName, m_sNumCopies)
End Sub
Public Property pPrinterName()
Get
Return m_sPrinterName
End Get
Set(ByVal value)
m_sPrinterName = value
End Set
End Property
Public Property pReportName()
Get
Return m_sReportName
End Get
Set(ByVal value)
m_sReportName = value
End Set
End Property
Public Property pNumCopies()
Get
Return m_sNumCopies
End Get
Set(ByVal value)
m_sNumCopies = value
End Set
End Property
End Class
Friend Class PrintMain
Private rs As New ReportExecutionService()
Private m_renderedReport As Byte()()
Private m_delegate As Graphics.EnumerateMetafileProc = Nothing
Private m_currentPageStream As MemoryStream
Private m_metafile As Metafile = Nothing
Private m_numberOfPages As Integer
Private m_currentPrintingPage As Integer
Private m_lastPrintingPage As Integer
Public Sub New()
' Create proxy object and authenticate
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
rs.Url = My.Settings.ReportExecutionService '"http://localhost/ReportServer/ReportExecution2005.asmx"
End Sub
Public Function RenderReport(ByVal reportPath As String) As Byte()()
' Private variables for rendering
Dim deviceInfo As String
Dim format As String = "IMAGE"
Dim firstPage As Byte() = Nothing
Dim encoding As String = ""
Dim mimeType As String = ""
Dim warnings As Warning() = Nothing
Dim reportHistoryParameters As ParameterValue() = Nothing
Dim streamIDs As String() = Nothing
Dim pages As Byte()() = Nothing
Dim historyID As String = Nothing
Dim showHideToggle As String = Nothing
Dim execInfo As New ExecutionInfo
Dim execHeader As New ExecutionHeader()
Dim SessionId As String
Dim extension As String = ""
rs.ExecutionHeaderValue = execHeader
execInfo = rs.LoadReport(reportPath, historyID)
'rs.SetExecutionParameters(parameters, "en-us")
SessionId = rs.ExecutionHeaderValue.ExecutionID
' Build device info based on the start page
deviceInfo = String.Format("<DeviceInfo><OutputFormat>{0}</OutputFormat></DeviceInfo>", "emf")
'Exectute the report and get page count.
Try
' Renders the first page of the report and returns streamIDs for
' subsequent pages
firstPage = rs.Render(format, deviceInfo, extension, encoding, mimeType, warnings, streamIDs)
' The total number of pages of the report is 1 + the streamIDs
m_numberOfPages = streamIDs.Length + 1
pages = New Byte(m_numberOfPages - 1)() {}
' The first page was already rendered
pages(0) = firstPage
Dim pageIndex As Integer = 1
Do While pageIndex < m_numberOfPages
' Build device info based on start page
deviceInfo = String.Format("<DeviceInfo><OutputFormat>{0}</OutputFormat><StartPage>{1}</StartPage></DeviceInfo>", "emf", pageIndex + 1)
pages(pageIndex) = rs.Render(format, deviceInfo, extension, encoding, mimeType, warnings, streamIDs)
pageIndex += 1
Loop
Catch ex As SoapException
'Console.WriteLine(ex.Detail.InnerXml)
Catch ex As Exception
'Console.WriteLine(ex.Message)
Finally
'Console.WriteLine("Number of pages: {0}", pages.Length)
End Try
Return pages
End Function
Public Function PrintReport(ByVal printerName As String, ByVal ReportName As String, Optional ByVal NumCopies As Integer = 0) As Boolean
Me.RenderedReport = Me.RenderReport(ReportName)
Try
' Wait for the report to completely render.
If m_numberOfPages < 1 Then
Return False
End If
Dim printerSettings As PrinterSettings = New PrinterSettings()
printerSettings.MaximumPage = m_numberOfPages
printerSettings.MinimumPage = 1
printerSettings.PrintRange = PrintRange.SomePages
printerSettings.FromPage = 1
printerSettings.ToPage = m_numberOfPages
printerSettings.Copies = NumCopies
printerSettings.PrinterName = printerName
Dim pd As PrintDocument = New PrintDocument()
m_currentPrintingPage = 1
m_lastPrintingPage = m_numberOfPages
pd.PrinterSettings = printerSettings
' Print report
'Console.WriteLine("Printing report...")
AddHandler pd.PrintPage, AddressOf pd_PrintPage
pd.Print()
Catch ex As Exception
'Console.WriteLine(ex.Message)
Finally
' Clean up goes here.
End Try
Return True
End Function
Private Sub pd_PrintPage(ByVal sender As Object, ByVal ev As PrintPageEventArgs)
ev.HasMorePages = False
If m_currentPrintingPage <= m_lastPrintingPage AndAlso MoveToPage(m_currentPrintingPage) Then
' Draw the page
ReportDrawPage(ev.Graphics)
' If the next page is less than or equal to the last page,
' print another page.
If m_currentPrintingPage <= m_lastPrintingPage Then
m_currentPrintingPage += 1
ev.HasMorePages = True
End If
End If
End Sub
' Method to draw the current emf memory stream
Private Sub ReportDrawPage(ByVal g As Graphics)
If Nothing Is m_currentPageStream OrElse 0 = m_currentPageStream.Length OrElse Nothing Is m_metafile Then
Return
End If
SyncLock Me
' Set the metafile delegate.
Dim width As Integer = m_metafile.Width
Dim height As Integer = m_metafile.Height
m_delegate = New Graphics.EnumerateMetafileProc(AddressOf MetafileCallback)
' Draw in the rectangle
Dim destPoint As Point = New Point(0, 0)
g.EnumerateMetafile(m_metafile, destPoint, m_delegate)
' Clean up
m_delegate = Nothing
End SyncLock
End Sub
Private Function MoveToPage(ByVal page As Int32) As Boolean
' Check to make sure that the current page exists in
' the array list
If Nothing Is Me.RenderedReport(m_currentPrintingPage - 1) Then
Return False
End If
' Set current page stream equal to the rendered page
m_currentPageStream = New MemoryStream(Me.RenderedReport(m_currentPrintingPage - 1))
' Set its postion to start.
m_currentPageStream.Position = 0
' Initialize the metafile
If Not Nothing Is m_metafile Then
m_metafile.Dispose()
m_metafile = Nothing
End If
' Load the metafile image for this page
m_metafile = New Metafile(CType(m_currentPageStream, Stream))
Return True
End Function
Private Function MetafileCallback(ByVal recordType As EmfPlusRecordType, ByVal flags As Integer, ByVal dataSize As Integer, ByVal data As IntPtr, ByVal callbackData As PlayRecordCallback) As Boolean
Dim dataArray As Byte() = Nothing
' Dance around unmanaged code.
If data <> IntPtr.Zero Then
' Copy the unmanaged record to a managed byte buffer
' that can be used by PlayRecord.
dataArray = New Byte(dataSize - 1) {}
Marshal.Copy(data, dataArray, 0, dataSize)
End If
' play the record.
m_metafile.PlayRecord(recordType, flags, dataSize, dataArray)
Return True
End Function
Public Property RenderedReport() As Byte()()
Get
Return m_renderedReport
End Get
Set(ByVal value As Byte()())
m_renderedReport = value
End Set
End Property
End Class
end namespace
View 27 Replies
View Related
Apr 11, 2008
Hi,
My Requirement is to dirctly Print the SSRS Report without using Reportviewer.
If anybody know How to Print Report without using Reportviewer, please let me know asap.
Thanks in advance.
View 2 Replies
View Related
Apr 5, 2007
I have a requirement to export certain data directly in csv format from the link thats in the report interface.
Though i am able to open new window report from the link by passing the needed parameter is there any way that we can directly open the excel from the link in data table in report..
View 1 Replies
View Related
Feb 27, 2008
i have a report that is on a subscription to my team members that i want to be rendered in the actual email that they open up. i do not want them to have to click on the pdf or excel attachment to open it up, i just want the content of the report to be in the email itself in outlook.
is this possible in SSRS 05?
View 3 Replies
View Related
Aug 22, 2007
Hello,
I am trying to get a SSRS 2005 report to print from my Visual Studio 2005 C++ application without using the ReportViewer to preview it first. What I have done is created a dll that I call into when I want to access a certain report and print it. While searching around on the internet I found an MSDN article about printing a report without previewing and it had an example in C# code. So I used that as a guide for my C++ code but I am still having problems with rendering the report properly so it can be printed. When I try to render a report using the "Image" format, my streamid string is empty but the byte array that the render routine returns is not. Here is the code I am using, what could be the problem here?
Note: m_Streams is define elsewhere as
array<String^>^ m_Streams = gcnew array<String^>(10);
void Print::Export(LocalReport^ report)
{
array<Warning^>^ Warn = gcnew array<Warning^>(10);
String^ deviceinfo =
"<DeviceInfo>" +
" <OutputFormat>EMF</OutputFormat>" +
" <PageWidth>8.5in</PageWidth>" +
" <PageHeight>11in</PageHeight>" +
" <MarginTop>0.25in</MarginTop>" +
" <MarginLeft>0.25in</MarginLeft>" +
" <MarginRight>0.25in</MarginRight>" +
" <MarginBottom>0.25in</MarginBottom>" +
"</DeviceInfo>";
String^ mimeType;
String^ enc;
String^ FileExt;
array<Byte>^ bytes;
bytes = report->Render("Image",deviceinfo, mimeType, enc, FileExt, m_Streams,Warn); // m_Streams has a length of
return; // 0 after the Render
}
void Print:: PrintPage(System:: Object^ sender, System:: Drawing:: Printing:: PrintPageEventArgs^ ev)
{
Metafile^ pageImage = gcnew Metafile(m_Streams[m_CurrentPage]);
ev->Graphics->DrawImage(pageImage, ev->PageBounds);
m_CurrentPage++;
ev->HasMorePages = (m_CurrentPage < m_Streams->Length);
return;
}
void Print:rintRpt()
{
String^ printerName = "Default";
if (m_Streams->Length < 0)
return;
PrintDocument^ printDoc = gcnew PrintDocument();
if (!printDoc->PrinterSettings->IsValid) {
return;
}
printDoc->PrintPage += gcnew PrintPageEventHandler(this, &Print:: PrintPage);
printDoc->Print();
return;
}
void Print::Run()
{
LocalReport^ report = gcnew LocalReport();
DataSet^ ds = gcnew DataSet();
LoadData(ds);
report->ReportPath = "c:\bmi\bulrpt\Report1.rdlc";
ReportDataSource^ RDS = gcnew ReportDataSource();
RDS->Name = "DataSet1_Subject";
RDS->Value = ds->Tables["Subject"];
report->DataSources->Add(RDS);
Export(report);
PrintRpt();
return;
}
DataTable^ Print:: LoadData(DataSet^ ds)
{
System:: String ^ConnStr = "SELECT * FROM Subject";
SqlConnection^ conn = gcnew SqlConnection("Data Source=JOE-PC\BMIMSDESERVER; Initial Catalog=stx52013;Integrated Security = TRUE");
SqlCommand^ command = gcnew SqlCommand(ConnStr, conn);
SqlDataAdapter^ adapt = gcnew SqlDataAdapter(command);
adapt->TableMappings->Add("Table", "Subject");
conn->Open();
adapt->Fill(ds);
return ds->Tables["Subject"];
}
View 2 Replies
View Related
May 2, 2007
Hi there,
Is there a way to programmatically save a RS results into Excel format using the render method ?
I had read about that capability but I can't seem to find any sample code on how to do it. Is this a parameter that you have to set in the render method ?
Any suggestion or tips are much appreciated !
Thanks !
View 5 Replies
View Related
Sep 21, 2006
Hi, I wanted to know that can we access a webpagefrom a store procedure in sql server 2000 like we run a exe file from sql server. Bye.
View 1 Replies
View Related
May 7, 2008
hi lads,
what i need to do for my project are as following:
a mobile user send data via GPRS to SQL server Database. then i need to have a method to detect while a particular table is being inserted. and then extract data from table construct a report dynamiclly. what should i do to achieve this goal? e.g. window application, store procedure or trigger ?
PS : client side is a mobile application developed using MCL. i don't in which way he will send all data to SQL server Database, so what i need to do is to monitor new data inserting.
2) how to auto generate and print report directly after record been inserted into the table ? Do i need to import report web service API ? if yes, which one? or i can use other methods e.g. predefine report control view in my window application, turn off pop-up menu while printing a report(I guess)
thanks
View 2 Replies
View Related
Dec 12, 2007
Hi
I was wondering if it was possible to call reporting server web service directly from my sql server stored procedure. The call that I need to make to reporting web service needs to generate the report in a PDF format.
View 1 Replies
View Related
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
Apr 2, 2008
Hi All,
Is there any way to remove the My Subscription,Site Setting links on the main page in Report manager.And also our client wants SSRS reports to be seen by his customer over the internet.Anybody knows about this?
Any help will be appreciated.
Thanks
Anupama
View 9 Replies
View Related
Nov 11, 2015
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies
View Related
Jan 23, 2008
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
View 6 Replies
View Related
Oct 1, 2015
I'm still receiving the emails of some subscriptions of reports that were already deleted, how these subscription could be deleted or turned off.
View 2 Replies
View Related
Jan 23, 2008
Hi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
View 8 Replies
View Related
Feb 27, 2008
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave
View 4 Replies
View Related
Jan 23, 2008
I have created couple report through report builder which using AS cube as the data source. Every time when I try to access the New Subscription from the web UI. It complains about "Subscriptions cannot be created because the cedentals used to run the report are not stored, or if a linked report, the link is no longer valid.".
So I went into "Properties" -> "Data Source" and use the custom data source. I've selected "Microsoft SQL Server Analysis Services" and put in the following Data Source=SQLTEST;Initial Catalog="Data Warehouse AS". I've select "Crednetials stored securely in the report server", using my Windows login and password.. and I've got the following error.
"
An error has occurred during report processing.
Query execution failed for data set 'dataSet'.
The SemanticQuery element at line 7, column 351 (namespace http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling) cannot appear under Envelope/Body/Execute/Command. "
Please help!!!
View 5 Replies
View Related
Dec 10, 2007
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
Thanks
View 1 Replies
View Related
Apr 10, 2008
How can I get only one page of data each time when I call the render menthod from the SSRS webservice
View 3 Replies
View Related
May 9, 2007
Hi,
Is there a way of passing a default parameter value into the subject title on a report subscription?
Currently there are std global variables i.e. @ReportName was executed at @ExecutionTime, but what other variables can be passed here to make it more relevant to the recipient?
Thx
View 1 Replies
View Related
Sep 10, 2012
We have a SQL database that uses Active Directory with Windows Authentication. Can users that are members of the Active Directory group that has read/write access to the SQL database create ODBC connections to access the database directly and update the data? They dont have individual logins on the server. They are only members of the Active Directory group that has a login?
View 1 Replies
View Related
Jan 26, 2007
Can a person change the page title from "Report Viewer/Manager" to the actual report name?
View 3 Replies
View Related
Feb 1, 2007
HI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
View 5 Replies
View Related
Jul 20, 2015
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies
View Related
Nov 5, 2007
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
View 1 Replies
View Related
Sep 17, 2007
I have provided required permissions, still user not able to view report builder option in his console.
what could be wrong? what needs to be done to provide report builder to users.
Deleep P
View 5 Replies
View Related