Hi,
I have processed the data successfully for the cube after desiging storage as MOLAP with 50% performance gain. When I tried browse the data I am getting the followign error.
Unable to Browse the cube 'cubename', Unspecified error.
Any help please.
Regards
John Jayaseelan
I have installed SQL Server 2005 on a server which runs Windows Server 2003 with SP2. And I have two client machines, both running Windows XP with SP2. Machine A has a full version of SQL server 2005 installed, including database engine, analysis service server, reporting service server. Machine B only has workstation components installed, BI development studio, SQL Server management studio.
I have developed a couple of analysis service projects and deployed to the server. On machine A, I can connect to the server and browse cubes no problem. On manchine B, I still can connect to the server and see the projects I deployed, even browse dimensions data. But when I browse cubes, management studio will be hanging there, not doing anything. Eventually I will have to kill it. I also opened the projects on machine B from BI management studio and try to browse data from there, it shows 'loading data' and doesn't do anything either.
Does anyone experience this type of issue? It's really frustrating as it doesn't show me any error message.
Thanks for any help.
Hi,
I have made sure that I am a member of OLSP Adminstrator group on the server and everything seems to work al the way till design storgae and cube processing but then when I browse the cube, I do not get any data :confused:
Can someone kindly help and guide please.
Many thanks.
Hello!
i am new user with the Analysis servises.
i started by doing the tutoraiol for MyFirstCube.
i performed the action step by step and succeded to create the cube. when i am trying to browse it iget this massage:
"unable to browe the cube" in the Cube browser.
do you know what is the problem?
what shoul i do?
thanks in advance
:confused:
I broke up my cube into 24 partitions. There are about 630M total fact rows in that cube.
When I open the cube to browse in BIDS or SQL Management Studio it takes very long time to open (I think 30 minutes).
Profiler does not show that it's running a query, but messages like this keep appearing throughout the time it's opening to browse:
Progress Report Begin, 14- Query, Started reading data from the 'p0' partition.
Progress Report End, 14- Query, Finished reading data from the 'p0' partition.
Progress Report Begin, 14- Query, Started reading data from the 'p10' partition.
Progress Report End, 14- Query, Finished reading data from the 'p10' partition.
and goes on like that....
After connected to Analysis Services and following the path below:
Analysis Service - Databases - Cubes
I create the parameters for a custom report after right click on a specific Cube and select Browse to arrive at a view where i can define dimensions and parameters as well as drag and drop measure to the report rows and columns. The left top File bottom only give me a Save Selection or Save ALL option. However, i'm not sure where it saves it to or if it saves the settings for this custom report at all.
I pull this report monthly and it's a pain to recreate all the parameters. How to save this template for future pulls or maybe even incorporate the pull into excel for monthly refresh instead?
I've created a simple cube following the below link, but when I try to deploy the cube I am getting the below error.
[URL]
I tried to connect from SSMS to analysis service, (Connect - > Analysis Services ) I am still getting the below error. I saw the SQL browser is running.
One more strange thing I noticed is, in the services I do not see the Analysis Services ( Screen attached below)....
I have one dimension and one measure group. I deployed and processed the cube. Now I am able to browse the data. Now I added one more dimension. I deployed and reprocessed again the Cube. Now I am not able to see any values. I am getting like below.
View 6 Replies View RelatedWe hit this error about 2 weeks ago on SQL Server 2000 and it seems to be getting worse.
We have a table that stores phone numbers (wtns). We have a number of pages that query this table. I can sit and click a link that queries this table over and over and finally after about 40-50 clicks, it will fail and repeatedly fail for about a minute with:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'Unspecified error
If our system is busy, I can get to the error much quicker. The strange thing is this table and these pages have not been modified, some of them haven't been touched in years so these queries worked just fine for that long until Dec 4th when the problems started (nothing significant happened that day or prior to that either).
I have the SQL Profiler running and what I see is the SELECT stmt completes just fine. The stmt looks as expected and I can even run it manually and it works fine. Then I see a series of audit login audit logout pairs in the profiler but nothing else, where I would expect to see more Queries from that page on other tables.
If I go to any of the 5 pages or so that has a similar query to this table, I can get the same error. No other table in our DB causes this problem. There is no problem cleaning up the connection/resultset either.
Any ideas where to look? We've done alot recently to try and fix it:
Reinstalled MDAC, reinstalled SQL Server SP, increased memory, shrunk the trans log, reindexed the table, changed the cursor around (made it readonly as it initally wasn't), modified permissions. Nothing seems to work.
This is on SQL Server 2000MDAC 2.81.1128.0Windows 2000 SP4IIS
Our Connection string looks like the following:
Session("Conn") = "DRIVER={SQL Server};SERVER=DS20021218001;DATABASE=ODB;UID=webUser;PWD=***
Any ideas on where to go next? What to try?
thank you
I have a DTS to transfer logins from one server to a another server. I have put the syslogins.dat file in the share directory. But this DTS is giving 'Unspecified Error'. Any help would be appreciated.
Thanks
We have a system that has been running for years and some of the .asp pages haven't been touched in years, but about 10 days ago the same SQL stmts that have always been there have been returning
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
Unspecified error
This is on SQL Server 2000
MDAC 2.81.1128.0
Windows 2000 SP4
IIS
The problem is this occurs at random. The statement will execute 5x, then fail once, then run 2 more times and fail again. There isn't a problem with the SQL itself as the same Select stmt will fail or pass randomly. I can also take and execute the stmt manually and it will also pass. There are about 5 places it occurs in our pages. Here is on particular example. Note that DataRS("acc_num") is a valid value and will return just fine if I manually execute it and will pass probably 75% of the time as it is, but 25% of the time will fail with above error.
CMD = "SELECT TOP 1 id, acc_num, businessType, mdCountry, cust_lec, First_Name, Last_Name FROM accounts WHERE (Acc_Num = '" & DataRS("acc_num") & "')"
AccRS.Open CMD, DBConn, adOpenForwardOnly
Not sure at all what is causing this. I've haven't been able to find anything conclusive in the SQL Profiler either.
Any ideas?
Is this the correct version of MDAC? I tried to get the latest, but it was an earlier version .1117.
thanks
Gday.
I'm writing a PDA app which has an SQL CE database on the storage card. Under certain circumstances, I get an Error Code 80004005 ; "Unspecified Error" exception (henceforth referred to as "The Error".
I can write to a certain table (the only one which has a problem) many times on the first run of the app since the database was created. However if I exit and reload the app, the error starts hapenning. It does not go away until I delete the database and re-create it.
The database has a password (I've tried with and without this to no avail) and the temp file is being stored on the Storage Card (the PDA itself doesn't have enough memory).
I have been extensively searching the net for existing solutions. I found this one from microsoft,
(http://support.microsoft.com/?kbid=919150) which suggests the PDA is coming out of suspend mode and trying to access the Storage Card. This sounds reasonable and similair to my case. I would like to change my code so it is not coming out of suspend mode (instead of trying to find that hotfix) but I don't know what suspend mode is. The code is being called from a button's handler. This sounds like it is coming out of suspend mode, doesn't it?
Has anyone else seen this? It has brought my project to a grinding halt and I can not see anything wrong with my code (it's doing the same insert command I've done a million times before on other tables).
Thanks in advance for any help!
Lee
We have a SELECT query that includes a FOR BROWSE clause and an ORDER BY clause that produces a 511 error (Updated or inserted row is bigger than maximum size) whenever we run it. The statement does not perform any inserts or updates. We have service pack 5a installed.
Any help greatly appeciated.
I have lost the ability to query any table in my database using the Query Designer/table viewer in Enterprise Manager.
I get the following error:
Query Designer has encountered an error. Unspecified error.
I can still query the table from SQL Query Analyzer and the client front end.
Has anyone seen this problem before?
Using the lookup on a table, working with Haselden book, I plug into table on the
reference table tab and then press columns tab and get "Unspecified Error" Any thoughts?
Connecting to the database to change a record works fine in xp/xphome but trying the same
thing in 2000 workstaton causes the error above.
Here is the script....tried adding a password to sa, but same results
Any help would surely be appreciated
'==========================================================================
' NAME: templateselector.vbs
' DATE : 6/22/2006
'
' COMMENT: Runs from an External Process. Assigns a template to an client
' and starts a PXE reset
'==========================================================================
'Define sConnection from View -> console options - copy/paste database connection string
sConnection="Provider=SQLOLEDB.1;Persist Security Info=False;User ID=sa;Initial Catalog=WINSTALL8;Data Source=ServerONDSQL;password=capture"
'Define sTemplateID Guid with the GUID for the specific template - DB table WIPXE_Templates
sTemplateID="{D204C283-8ABA-4D5F-9F9E-618B73BA0CF9}"
'==========================================================================
Set conn = createObject("ADODB.Connection")
conn.Open (sConnection)
Set oWshNet = CreateObject("WScript.Network")
sCompName = oWshNet.ComputerName
SQLTEXT="select * from WICON_MACHINES where name = '"&sCompName&"'"
Set nodeRS = conn.execute(SQLTEXT)
sMID=nodeRS("MachineID")
SQLTEXT="update WIPXECR_CLIENTS set templateid='"&sTemplateID&"', RESETCMD='1', RESETSTATUS='1' where machineid='"&sMID&"'"
Set nodeRS = conn.execute(SQLTEXT)
I am using SQL 2000 (SP4) and trying to save a DTS Package. When I do that it gives me an error:
Error Source : SQL OLE DB Provider
Error Description : Unspecified error
The package runs fine and I can change global variables, etc. But I just can't save it. Any help would be appreciated.
Thanks,
Amir
Hello, we've developed an application that runs on AXIM X51, if it is an important to know.
The data layer handles the connection using the singleton pattern, a bit of code of this is:
(....)
Private Shared ceConnection As SqlCeConnection
(....)
Public Shared Function GetConnection() As SqlCeConnection
Try
If (ceConnection Is Nothing) Then
ceConnection = New SqlCeConnection(Me.connectionString)
End If
If (ceConnection.State = ConnectionState.Closed) Then
ceConnection.Open()
End If
Return ceConnection
Catch ex As Exception
Throw ex
End Try
End Function
(....)
So far nothing strange. We started experiencing problems when the end-users get an "Unspecified error" which later debugging it we got the href value inside the exception object is -2147467259 and nothing else. And if that wasn't enough I couldn't replicate the error in my pocket.
The only way I got the same error was removing the SD Card where the db is located at the same time the application was still open.
Does anybody experienced the same problem??? I researched about this kind of errors "when the device is just restored from the suspend mode" but with out luck.
Please, I really appreciate any help with this issue. Any comment will be more than welcome.
hello all
i m getting the following error while exporting an excel file in SSIS
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
is this a bug?
pls suggest a workaround.
Greetings:
We have a database with approximately 15-20 tables. Last week, using Enterprise Manager, we were able to open any of these tables and return all rows. Yesterday, when we tried to do this, we got the following message:
An Unexpected Error happened during this operation.
[Query] - Query Designer encountered a Query Error: Unspecified Error
Can anyone tell me what might be causing this and how to fix it? Barring that, can anyone suggest some general steps I might take to possibly eliminate this problem without knowing the cause? Last, can you point me to a good resource for investigating problems of this kind, such as a knowledge base (other than Microsoft's TechNet)?
Many, many thanks.
Hi,
I deployed SSRS reports to my local report server and set the connection string to access a server on the network with Analysis Server.
Result:
I can access and use the reports from my computer. But when I use any other computer on the network I can't use the reports. I can access them but they don't find the database ant therefor they don't present any data.
Error message as folows: "An error has occurred during report processing. (rsProcessingAborted) Get Online Help
Cannot create a connection to data source 'dsAnalys'. (rsErrorOpeningConnection) Get Online Help
Database 'Analys' does not exist. "
This works fine on my local machine, the error comes only when i try to browse on a remote machine. I am using SQL Server 2005
Any help would be appriciated!!!
Thanks in advance,
Chanduu
Hello All,
I need you help badly. Iam a student and iam working on "Creating a Mobile Application with SQL Server Compact Edition" http://msdn2.microsoft.com/en-us/library/ms171908.aspx . This tutorial works fine until
Create the publication snapshot
In SQL Server Management Studio, in Object Explorer, expand the (local) computer node.
Expand the Local Publications folder, select the publication name, right-click SQLMobile, and then click View Snapshot Agent Status.
In the View Snapshot Agent Status dialog box, click Start.
Make sure that the snapshot job has succeeded before you continue.
When I try to create a snapshot iam getting the following error "An unspecified error had occurred in the native SQL Server connection component." . I have no clue what to do next please help me out.
Hi all
When using a subscription to send mail, I find that the report can be sent in any format apart from Excel, which gives me the error: "Failure sending mail: Unspecified error". As you can imagine, this doesn't give me much to go on!
I want to use Excel format as it retains the drilldown functionality (hiding / unhiding rows). The ExecutionLog has the status as rsSuccess, but Subscription tab for the report shows the error.
Any thoughts would be most welcome!
Hi,
Inside a single transaction I'm inserting/updating multiple records into multiple tables, in this order:
table 1 record 1
table 2 record 1
table 3 record 1
table 1 record 2
table 2 record 1
table 1 record 3
table 2 record 3
table 3 record 3
Now I'm getting an unspecified error on a certain table:
Unspecified error [ 3,-1300704038,-1834095882,activitypointerBase,x lock (x blocks),PAG (idx): 1078 ]
From msdn I see that:
PAG (idx) means a lock on an index page.
x lock means an exclusive lock:
Indicates a data modification, such as an insert, an update, or a deletion. Ensures that multiple updates cannot be made to the same resource at the same time. (I assume that multiple updates within the SAME transaction can be made, only multiple updates from different transaction cannot be made, right?)
I cannot find any reference to this error message and don't know what the numbers mean. Maybe it relates to data that can be found in the sys.lock_information table like explained here, http://technet.microsoft.com/en-us/library/ms172932.aspx, but I'm not sure.
Furthermore, the sys.lock_information table is empty. I haven't been able to reproduce the problem myself. I only received an error log and the database to investigate it.
So, does anybody have an idea what this error message means and what I can do to troubleshoot this?
Thanks,
Jeffry
I've just installed sql 2005x64 and sp2 on a active/passive cluster on 2003. Everything is working fine except browsing the stored msdb packages in SSIS. Remote acces is enabled - as are named pipes. I've tried doing this on the local server as well. I was able to create a maintenance plan and run it with no problems.
We got an error during the install pertaining to SSIS, but hit ignore and it went on successfully.
It was - failed to install and configure assemblies .....MSMQTask.dll in the com+ catalog. Error -2147467259.
description: Error HRESULT E_FAIL has been returned from a call to a COM component.
The browsing error is below.
Thanks!
Sam
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
The SQL server specified in SSIS service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring the Integration Services Service" in Server 2005 Books Online.
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (MsDtsSrvr)
------------------------------
BUTTONS:
OK
------------------------------
I have ran into the same problem ... Importing from Access into SQL 2005 using SSIS and get the error:
[Connection manager "SourceConnectionOLEDB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Dear Listers,
We're using AS sp2.
Just about every action within AM generates the following message:
"DSOInfo: Cannot create temp directory c:program filesOLAP
ServicesBin..Help80metadatametatemp100. Please verify that you have enough disk space, and
they try again."
Has anybody been able to source the reason & subsequently remove the message?
Also, for a particular user, while attempting to edit a cube, who is defined as an OLAP Admin, receives the following message:
"Unable to connect to the 'Data source name' data source.
Does anyone have any ideaes?
TIA
John
I am trying to access Cube through SSIS and have been unable to set SSIS package with the work around provided here (https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=219068). On pasting the MDX query using the openrowset command on the OLEDB source editor, I get a pop up window with error 0x08000405 and the message that says 'syntax used for openrowset is incorrect'
I also tried running this on SQL Management studio but, get the following error.
OLE DB provider "MSOLAP" for linked server "(null)" returned message "An error was encountered in the transport layer.".
OLE DB provider "MSOLAP" for linked server "(null)" returned message "The peer prematurely closed the connection.".
Msg 7303, Level 16, State 1, Line 3
Cannot initialize the data source object of OLE DB provider "MSOLAP" for linked server "(null)".
The server where the cube resides is on 64bit machine and I have 32-bit..could this be the reason for the issue?
I found this article on microsoft support website (http://support.microsoft.com/kb/947512 ) which describes the possible symptoms and causes for connectivity issues But, couldn't find a work around for it.
Here is the syntax of the query I am using in SSIS and query analyser
SELECT * FROM
OPENROWSET('MSOLAP', 'Integrated Security=SSPI;Persist Security Info=True;Data Source=<SERVERNAME>; Initial Catalog=<Catalog name>;'
,
'MDX Query') AS Rowset_1
Any help with this issue is appreciated!
Thanks,
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
I right click on my AS cube and click "Process". It tells me the server content is out of date would I like to build and deploy first. i say yes.
View 31 Replies View RelatedI am just starting out using CUBEMEMBER/CUBEVALUE formulas in excel linked into a sql olap db - using this method for some custom reports where pivot tables are not suitable.
The time dimension values include Months, Quarters and Years and the CUBEMEMBER formulas like
=CUBEMEMBER("OLAPCUBE","[Time].[Time].[Year].&[2015].&[1].&[1]") work fine - 1st quarter 1st month etc.
Is there a straightforward notation to aggregate months or do I need to use a plus sign to add a number of CUBEMEMBER formulas together.In other words - Is there an easier way of for say jan to july 2015 totals than
=CUBEMEMBER("OLAPCUBE","[Time].[Time].[Year].&[2015].&[1]") + (CUBEMEMBER("OLAPCUBE","[Time].[Time].[Year].&[2015].&[2]")) + (CUBEMEMBER("OLAPCUBE","[Time].[Time].[Year].&[2015].&[3].&[7]"))
I haven't tested this but have assumed it works but a bit long and clumsy.
When I process a new cube I recieve an error "Error (211): Unknown dimension member ' 8'; Time: 8/11/00 1:09:45 PM". Any ideas about what this error is about ?
View 2 Replies View RelatedPlease help i have an error when i try to browse a cube.
= "Unable to browse the cube."
"Unable to locate the cube." or "Unspecified error."
thanx,
Lister104