Hi all,
Greetings,
I have a SPID 10 which running a query which is below is not getting killed
and this SPID is blocking other SPID's. Is there any way to kill it pls help me
"select A.*
from ARO A where A.InvoiceNumber in
(select B.InvoiceNumber from AR1 B
where B.Division='20'
/*UNION
Select C.SOApplytoInvoiceNumber from AR1 C
where C.Division='20'*/
UNION
Selec"
Waiting for reply
TIA
ADIL
I can not stop a process using 'KILL spid'.What else should I try?
process has begun a transaction and does not commit.
can we just kill spid and drop it without doing any rollback ...?
Thanks,
ServerTeam
Hi
:eek: I have a strange problem on my sql 2000 sp4 server
When I kill a session I gives me
Msg 6101, Level 16, State 1, Line 2
Process ID 61 is not a valid process ID. Choose a number between 1 and 32817.
The process exists in sp_who and sp_who2
it even has an entry in the sysprocesses
this happens with all processes even test ones that we create that are'nt doing anything
any suggections (I have been told to re-install sql 2000 but this is not possible as it is a production server and I will only get maintenance time on sunday's not enough time to rebuild )
Hi,
Could anyone tell me why I am not able to kill processes even with kill spid. I had scheduled some db backups through DB Maintenance. All of them are running for days together when I tried to kill them spid. It still does not get killed. Can anyone tell me why
Hi,
I'm having a problem killing a process in SQL 7.0. I have a spid that has been around for a couple of weeks! I try to remove that process by right clicking and selecting 'Kill Process' but nothing happens. The process originated when I deleted large amounts of data from a logging table. NOw I can not remove the process. I'm concerned that this might indicate the database is getting corrupted.
Any suggestions?
Thanks in Advance
Hello,
We have a recurring problem with one of our MS SQL Servers (MS SQL Server 2005 SP 1).
The SQL Server serves as a database server for a Web application with approximately 1500 users, the server is dedicated for the DataBase server.
The scenario is that the database servers cpu peaks at 100% and stays there until restart of the SQL Server service.
The error message from the applicatoion log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 18056
The client was unable to reuse a session with SPID 94, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
SPID varies.
Anybody that knows anything why this error occurs?
Regards
John
Hello!
I am trying to troubleshoot weird problem. I noticed that msdb log size was growing. I have discovered jobs executing particular stored procedure that had an open transaction in msdb and killed spid in question. This stored procedure was executing sp_send_dbmail at the time I killed spid and fn_get_sql returned xp_sysmail_format_query as currently executed statement. SPID is showing KILLEDROLLBACK status but it hasn't changed for hours and msdb log continues to grow. I am running SQL Server 2005 SP1. I was wondering if anyone has expeienced similar problem. Any advice is greately appreciated.
Thanks,
Igor
I'm trying to kill a bunch of processes in SQL 6.5 and I can't. I'm running the only machine with SQL tools installed on it (the server) and it won't let me kill them. I try the GUI screens and the Kill statement in ISQL_w. Is there any way around this?
I've stopped the SQL Server and rebooted the NT Server. Is there anyway I can get rid of these processes. They are locking some tables and keeping me from inserting data within my code. Very frustrating.
Thanks
Could someome please tell me what is going on with the following stored procedure:
EXECUTE msdb.dbo.sp_sqlagent_get_perf_counters
HI!
if i have SPID. then can i get the storedprocedure name ?
Regards,
Shabber Abbas Rizvi.
All,
Is there any way to see the SQL for any given spid in SQL server?
I can see "properties" under enterprise mgr - which shows you a snippet of the SQL - or "sp_execute" depending on what you use to get to the DBMS.
Is there a way to take a deeper look?
Thanks,
Isaac
Hi,
Can I have more than one value for variable @@SPID during a connection?
PS: sorry my english.
Thanks.
Hi All,
Sql Server 7.
I have a table cust_detail when ever there is an insert/update/delete in this table it is getting blocked and in turn its blocking other table inv_credit which is doing select statement.
Please suggest me what might be the reason.
Waiting for Reply
TIA
Adil
Hi to all.
I have a small doubt.
In my server some processs are running slow.
With out the use of profiler hw we can find the spid's that are running slow. is there any procedure for that.
I am seeing intermittent blocking problems. The strange part of it is,that the SPID listed in the Blk By column is the same as the SPID thatis being blocked.Has anyone seen this before, or have any idea what this may suggest?
View 1 Replies View RelatedHi,
Here i have a question..
Whenever i see my spid in LOCK/PROCESS ID
one command DBCC BUFFERINPUT(MY SPID) always running
and it is showing ''''tempdb.dbo.##lockinfo'''
MODE---- X
Is it pretty normal or something wrong..
i am not running any thing, just simply opened EM..
Pls any suggestions...
thank u
kavira
I know that spid 22 is blocking 2 other users. How do I tell who that user is? Is this just matching the same spid# in the process info in EM and if it doesn't give me an NT name it's probably because they're coming through the application and I can't figure it out?
Thanks
I'm going to try to explain my situation.
I have a spid that I'm not able to kill, this were a select statement from with in access 97 application using a DNS connection.
So even that I reboot the client pc and kill the spid it still shows as active with status RollBack.
We have similar problem before and the only way that it disappear were re - starting Sql.
(system Sql 7.0 with sp1 and Access 97)
Thanks.
How do COM+ transactions relate to SQL Server SPID?
I am trying to solve a deadlock issue. Using SQL trace, I find SPID 65 and 71 are trying to acquire resources that are locked by each other. But what I am confuse with is tasks performed by 65 are triggered by different transactions (same for 71). Should different COM+ transaction uses different SPID?
The entire COM+ application uses only one db login.
Please advice.
I have a problem. I am trying to kill a spid that is blocking updates to a table.
The spid number is '-2'. I am using KILL with UOW and I am getting this error:
Server: Msg 6112, Level 16, State 1, Line 1
Distributed transaction with UOW {FCF8D536-27ED-11D6-9CF2-0002A56BDA54} is in prepared state.
Only Microsoft Distributed Transaction Coordinator can resolve this transaction. KILL command failed.
Users are connecting through MTS server. I am runnnig SQL2000 sp2 +hotfix, on NT4.0.
Has anyone encountered this problem before, and has a solution for it (besides rebooting the MTS and SQL Server)?
Thanks,
Peter
What is SPID -1? I see nothing listing it in any activity monitor, but it has just recently started blocking some processes.
Thanks,
jim craddock
We are using SQL Server 2000 SP4.
Every week to few weeks we'll have a situation where the cpu will max out on our main db server.
This server is a hoss, dual quad core with 16 gigs of ram. All the system type stuff looks good.
I look into the spids though and I notice a few of them that are very high in cpu.
I believe that I've noticed over time that a certain SPID never releases and starts fresh. Could it be possible that a program is written in a way that it just keeps using it over and over with each new user and it nevers releases that CPU?
I know this is a probably a pretty dumb question and there's alot of details I have to leave out for being brief. Ultimately I have to find out why the CPU is hitting 100 percent and hanging there.
I know it's this program because when I stop the app pool for only that program then the CPU on the SQL box goes back down.
Any help would be appreciated...and feel free to ask more questions for more detail and I'll try to give it.
What is "SIGNAL HANDLER" (SPID 1)?
And what is SPIDs 1-6 ?
Exec Sp_who:
SPID Status DBName Command
----- ------------------------------ ------ ----------------
1 sleeping master SIGNAL HANDLER
2 BACKGROUND master LOCK MONITOR
3 BACKGROUND master LAZY WRITER
4 sleeping master LOG WRITER
5 sleeping master CHECKPOINT SLEEP
6 BACKGROUND master AWAITING COMMAND
Hi Everyone,
I noticed that in my SQL 2000 system, one SPID can have multiple ECID when I run sp_who.
Recently, users get timeout message. In the server performance monitor, I can see the SQLSERVER.exe takes a lot of CPU time when this happens.
Could anyone please explain this to me and provide me the solution for it?
Thanks in advance,
Jason
I trying to find a way to find what the SPID of a given job that is running. I am trying to create a script that will give me the SPID the JOB_ID, and JOB_NAME. The problem comes in that if I use sysprocesses I have to pull the JOB_ID from program_name in sysprocesses and convert it into something then join it to sysjobs. Have not been sucessfull in that conversion. Any Ideas
thanks for any & all help
sean
The following is an extract from sp_who2
SPID Status Login HostName BlkBy DBName Command CPUTime DiskIO
----- ---------- ------- -------- ----- ------- ------- ------- ------
162 sleeping om18682 . -1 STIPROD SELECT 236 120
Has anybody experienced a process being blocked by SPID -1.
Hello -
I have a Foxpro app with a SQL Server 7 backend. The Idle Connect setting on VFP is set to indefinite. I'm having some connectivity issues where the SPID for the client seems to disappear from the active SQL processes on the server when the client sits idle for a while (10 minutes or so). On some workstations, resuming activity at the client results in the SPIDs reappearing
as if they were always there with no problem. On others, the connection is not reestablished and the client gives a 1526 (VFP ODBC) error.
Does anybody know why this might be? Are the SPID connections cached at both sides and if so, how?
Thanks.
Steve
Hey all,
I've got a third party app running atop my sql server instance. When auditing logons in profiler, I see that the user (sa) logs off, and then immediately logs back on. Interestingly, the app logs back on with this user again, and the instance gives it the same spid as it previously had.
Can anyone explain this behaviour, or point me to a place where I can investigate ?
Thanks,
-Kilka
Hey guys,
I'm wondering if it's possible to see which library which a spid is using? For example, is the spid coming from a jdbc connection, or an odbc connection?
Thanks,
-Kilka
Hi All,
I got problems with some procedure whic are blocking one of my databases. Biggest problem is I don't which those procedures are.
Last time it happened I ran sp_who2 active. I was able to identify two suspended blocked processes, one (UPDATE - SPID:58) blocked by the other one (SELECT - SPID: 68), the other one blocked by a runnable one (UNKNOWN TOKEN - SPID: 70).
For all of them I got SQLAgent - TSQL JobStep (Job [0xDA9A9D92A78C0E42A37EE96C7BEBB073] : Step [1]) so it's pretty obvious they are executed by SQL Agent Jobs.
I am trying now to identify the jobs from the keys 0xDA9A9D92A78C0E42A37EE96C7BEBB073 but no idea how to do it.
I was looking at the SPIDs but I discovered they can change, so no use in that.
Anyone of you guys can help?
Cheers and thanks in advance!
Giovanni
Hello 2 all,Maybe my question can be very stupid, but I'm a little confused.When I run sp_who on my database, I see one process (accessing remotelymy database from another database on another SQL server) many manytimes.Well, I assume that this is one process, because I cannot imagin thatthe data aquiring can be done by almost 1000 (thousand) openedconnections.This is what I have. Almost 1000 spids running (sleeping) with cmd =awaiting command.The best part is, that when I run sp_lock, I see, that the currentsession of the client, (lets say spid 53) is locking tempdb, withobjects id below 10 (system).As far as i know, and as far as I'm using this in my software, there isno necessity to open-close-open-close connection.Normaly, you can just open a connection to db, with assigned spid, andoperate within this just one. After the disconect ist done, the sessionshoould be removed.I think, there is something wrong in the way, the remote system isconnecting to my database, but i'm not sure is it normal what I'mexpieriencing or not.below, a piece of that what sp_who returned:SPIDECIDstatusloginnamehostnameblkdbnamecmd2660sleeping remote_user_namehost_ERP 0PRIMARY_PROCESS_DBAWAITING COMMAND2670sleeping remote_user_namehost_ERP 0PRIMARY_PROCESS_DBAWAITING COMMAND2680sleeping remote_user_namehost_ERP 0PRIMARY_PROCESS_DBAWAITING COMMAND2690sleeping remote_user_namehost_ERP 0PRIMARY_PROCESS_DBAWAITING COMMAND2700sleeping remote_user_namehost_ERP 0PRIMARY_PROCESS_DBAWAITING COMMAND2710sleeping remote_user_namehost_ERP 0PRIMARY_PROCESS_DBAWAITING COMMANDand these are locks from sp_lock 53 which is the current runningprocess:53700DB SGRANT53260TAB IXGRANT53210TAB IXGRANT53230TAB IXGRANT53220TAB IXGRANT532120TAB IXGRANT53290TAB IXGRANT532110TAB IXGRANT53232KEY(1902141b21c7) XGRANT53213KEY(e60041ad2c6f) XGRANT53232KEY(5b0233670fb9) XGRANT53232KEY(6e0212a7298c) XGRANT53232KEY(97013ece81c8) XGRANT53231KEY(e7006f987fb0) XGRANT53213KEY(ad00a33f46b9) XGRANT53210643560700TAB Sch-MGRANTany idee?ThanksMateusz
View 1 Replies View Related
I'm profiling some SQL work from ADO.NET and I see a large number of sp_reset_connection but what I don't understand is how the SPID remains constant if the connection truly has been reset. Obviously it doesn't reset the SPID so what *is* going on? NB This is a number of ADO calls inside a System.Transaction.