Unable To Remote Access

Nov 22, 2006

Hi all,

I encounter a problem of unable to access Remote Server after i placed my web application into the web server.

 An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)

So I googled and tried lot of different ways of connecting.
By piped name, IP, trying instance which that server don't even have one :X.

I also tried typing in cmd > telnet localhost 1433

It appeared that the telnet fail, i tried it on other machine, it works. So is it cause by denied of access through that port?
I checked at the sql client network, it show 1433, i check the server too, it show 1433.
I also checked if there's any firewall, it appear there is no firewall at all.

The sql server i trying to connect is SQL 2000, it run by Windows Server 2003

Any advise or more information you needed to help me solve this problem?

Thanks

View 1 Replies


ADVERTISEMENT

XP Home -LAN Remote Access - Unable To Connect From One Single Computer.

Jan 5, 2007

Hi,

I have Windows XP Home Workgroup LAN.

I am treating one of the XP Home system as 'Server' and installed SQL Express 2005 SP1. Enabled remote connections access.

I have total 4 XP Home systems, out of which one i am treating as Server, from the rest 3 computers, 2 are successfully connected to the Server and able to access SQL Express without any problems. But the 3rd system is unable to communicate with the Server. I disabled all firewalls in this 3rd system but still unable to connect to the server. I am able to ping the server, browse for shared folders on the server. Except SQL Express remote connection, everything else in the network is accessible from this 3rd computer.

Can anyone help me on how to troubleshoot this 3rd computer sql express connection problem to the server.

I don't have any error message to provide here. It just says, unable to connect to sql server, verify username/password etc.

Is there any limitation on SQL Express remote connections ?

View 1 Replies View Related

Remote Access Server Configuration Option And Remote Query Timeout?

Jun 2, 2015

- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?

- what is the impact of changing the remote query timeout (on the same page) from default value?

View 4 Replies View Related

Unable To Connect To The Remote MS SQL SMS Express

May 30, 2007

Hello
I am able to connect to the server and most of the time I can't connect.
It is important to be able to connect so I can manage my mdf - database.
To test ... I disable the firework but I still can't connect 90% of the time.
Thank you in advance.
~ Peaches ~ 
 

View 3 Replies View Related

Unable To Connect Remote Connection

Sep 25, 2007

Server Error in '/Dive' Application.


An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
 
this is the error message I found when I run my asp.net application and the connection string as follows:
<add key="ConnectionInfo" value="Server=(local);Database=Dive;Trusted_Connection=yes;" />
can someone tell me how to connect and how to specify username and password in Visual Web Developer 2005 Express Edition..........
I'm a little bit new on VWD 2005 I need an assistance on it.

View 4 Replies View Related

Unable To Connect To A New Remote SQL Server

Jul 22, 2005

My VS 2005 website project was connecting to a remote SQL Server. But after I move the database to the second SQL Server, I got the following error message from running my website project:
 
Named Pipes Provider: Logon failure: unknown user name or bad password.
 
 
I do everything same like what I did in the first SQL server:
 

Using “SQL Server and Windows� authentication and “System account�;
Create a domain account IIS_WPG;
Grant this IIS_WPG as db_owner for the database;
In web.config, add the name and password to the end of connectionstring;
Make sure the SQL Server has “Named Pipes� and “TCP/IP� protocols.
 
I have no idea what I can do else, anybody has suggestions?
 

View 3 Replies View Related

Unable To Connect To The Remote Server

Jul 13, 2006

Greetings:

We have a copy of SQL2k Report Services running on a Windows 2003 Server. But the database used by the Reports is actually on another box in our network. (This is a option you can use during install.) This setup worked fine for about a year but now neither the reports and ReportManager no longer run. The Reporting services Log error is:

System.Net.WebException: The underlying connection was closed: Unable to connect to the remote server.

In a browser we get the error:

---

"Directory Listing Denied"

"This Virtual Directory does not allow contents to be listed."

---

Turning on the option to list directory contents in IIS does not resolve the issue.

Anyone seen this creep up before? I am unaware of any changes to the machine's security in the last few weeks but something has obviously changed.

I can ping the remote servers where the DB's are stored.
I am using Windows Integrated Authentication.
I have a dev box with a similar configuration, except everything is hosted locally, and it runs fine.

Any ideas?

Thanks.

View 13 Replies View Related

Unable To Connect To The Remote Server

Apr 7, 2007

<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_54_49.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it

at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)

at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)

at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)

--- End of inner exception stack trace ---

at System.Net.HttpWebRequest.GetRequestStream()

at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)

at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()

at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)

at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()

at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)

at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)

at System.EventHandler.Invoke(Object sender, EventArgs e)

at System.Web.UI.Control.OnInit(EventArgs e)

at System.Web.UI.Page.OnInit(EventArgs e)

at System.Web.UI.Control.InitRecursive(Control namingContainer)

at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:54:59:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)


-------------------------------------------------------------------------------------------------------------------------------------------------



<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_41_11.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it

at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)

at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)

at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)

--- End of inner exception stack trace ---

at System.Net.HttpWebRequest.GetRequestStream()

at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)

at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()

at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)

at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()

at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)

at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)

at System.EventHandler.Invoke(Object sender, EventArgs e)

at System.Web.UI.Control.OnInit(EventArgs e)

at System.Web.UI.Page.OnInit(EventArgs e)

at System.Web.UI.Control.InitRecursive(Control namingContainer)

at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:37:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it

at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)

at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)

at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)

--- End of inner exception stack trace ---

at System.Net.HttpWebRequest.GetRequestStream()

at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)

at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()

at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)

at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()

at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)

at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)

at System.EventHandler.Invoke(Object sender, EventArgs e)

at System.Web.UI.Control.OnInit(EventArgs e)

at System.Web.UI.Page.OnInit(EventArgs e)

at System.Web.UI.Control.InitRecursive(Control namingContainer)

at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:46:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it

at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)

at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)

at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)

--- End of inner exception stack trace ---

at System.Net.HttpWebRequest.GetRequestStream()

at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)

at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()

at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)

at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()

at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)

at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)

at System.EventHandler.Invoke(Object sender, EventArgs e)

at System.Web.UI.Control.OnInit(EventArgs e)

at System.Web.UI.Page.OnInit(EventArgs e)

at System.Web.UI.Control.InitRecursive(Control namingContainer)

at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:53:56:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: Unable to connect to the remote server
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it

at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)

at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)

at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)

--- End of inner exception stack trace ---

at System.Net.HttpWebRequest.GetRequestStream()

at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)

at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()

at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()

at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)

at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()

at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)

at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)

at System.EventHandler.Invoke(Object sender, EventArgs e)

at System.Web.UI.Control.OnInit(EventArgs e)

at System.Web.UI.Page.OnInit(EventArgs e)

at System.Web.UI.Control.InitRecursive(Control namingContainer)

at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!4/7/2007-10:54:02:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

View 3 Replies View Related

Unable To Connect To Remote Server - On Localhost...

Mar 30, 2007

Hi!



When trying to log into Reporting Services in SQL Server 2005 Management Studio, I receive the following error message:



TITEL: Verbindung mit Server herstellen
------------------------------

Es kann keine Verbindung mit 'RD2MWD000349' hergestellt werden.

------------------------------
ZUSĂ„TZLICHE INFORMATIONEN:

Unable to connect to the remote server (Microsoft.SqlServer.Management.UI.RSClient)

------------------------------

No connection could be made because the target machine actively refused it (System)

------------------------------
SCHALTFLĂ„CHEN:

OK
------------------------------


Has anybody had that problem before? Happens right after installation, no customisation of the SQL Server has been done yet. And I run the server on localhost.......

View 3 Replies View Related

Unable To Connect To A Remote Database From Vista

Jan 3, 2008

We have a problem to connect to a specific database on our local network from a specific Vista machine. Several other XP and Vista machines are able to connect to the database without any problem. However, with the two latest Vista machines we received, it is impossible to connect to the database. In Microsoft SQL server Management studio express, we have the error 26 "error locating server/instance specified". We are sure the server name we entered is correct. We suppose the server is correctly configured as we are able to connect from other computers. From the machines that are not able to connect to the database, we can connect without problem to other databases. We also see the server, where the database is, on the network servers list in Microsoft SQL server Management studio. .
The version of the components are:
Microsoft SQL Server Management Studio Express 9.00.3042.00
Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205)
Microsoft MSXML 3.0 4.0 6.0
Microsoft Internet Explorer 7.0.6000.16575
Microsoft .NET Framework 2.0.50727.312
Operating System 6.0.6000
We verified we have the same version of components on the Vista machine from which the connection is successful.
The network database has the version 8.0.
We are usinng sql server authentification method.
We try to specify the IP address instead of the server name in the connection string. We also tried to specify the port.
We also tried to disable the firewall.
Unfortunatetly, we are not able to connect to this database. Any suggestion ?

View 3 Replies View Related

Unable To Connect To Remote Webhost Server

Jun 12, 2007

I've recently got a new webhosting account with hostinguk who have do the following:


We have created a SQL 2005 database for you named: DBCOX10289
and a system DSN named: DBCOX10289
To access your database you will need Microsoft SQL Server Management Studio / Express
If you do not have a copy of this you can download Microsoft SQL Server management Studio Express at the following location:
http://msdn.microsoft.com/vstudio/express/sql/default.aspx
In enterprise manager you should register the server: sql5.hostinguk.net
You will need to use the following login name and password when registering the server and accessing your database.
SQL 2005 username: COX10289
SQL 2005 password: password
To use this server within your web site code please ensure that you refer to the server as sql5.hostinguk.net
PLEASE NOTE: Do NOT use the IP address of this server directly as this will cause problems for you should we make network changes at any point in time.



I have tried and am in despair but still am unable to connect to the server. Running a XP machine In Administrative tools ODBC I have created a DSN called DBCOX10289 with the server name sql.hostinguk.net. upon completing the ODBC setup I get this:

Microsoft SQL Native Client Version 09.00.3042

Data Source Name: DBCOX10289
Data Source Description: Keystages
Server: sql5.hostinguk.net
Use Integrated Security: No
Database: (Default)
Language: (Default)
Data Encryption: No
Trust Server Certificate: No
Multiple Active Result Sets(MARS): No
Translate Character Data: Yes
Log Long Running Queries: No
Log Driver Statistics: No
Use Regional Settings: No
Use ANSI Quoted Identifiers: Yes
Use ANSI Null, Paddings and Warnings: Yes



I then click on test connection and get



Microsoft SQL Native Client Version 09.00.3042

Running connectivity tests...

Attempting connection
Connection established
Verifying option settings
Disconnecting from server

TESTS COMPLETED SUCCESSFULLY!



Whne I'm scrolling through the options in ODBC it can see all the other databases on the server.



When I then try register the server in SQL server management studio express



Servername: sql5.hostinguk.net

Authentication: SQL Server Authentication

Username: COX10289

Password : password



===================================

Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.

===================================

Login failed for user 'COX10289'. (.Net SqlClient Data Provider)

------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476

------------------------------
Server Name: sql5.hostinguk.net
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536


------------------------------



I try this servername as well: sql5.hostinguk.netDBCOX10289 and still get



===================================

Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.

===================================

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)



I can ping the servername and get the IP address

I can telnet the server and port 1433 and connect successfully

The hosting company do not support sql 2005 express



I have tried researching this as much as possible, all to no avail. What can

I do?





View 5 Replies View Related

Unable Delete Remote Files Using FTP Task

Sep 28, 2006

I can create remote folder and delete it

I also can create remote files but i can not delete remote files

error warning is like subject

any ides? thanks

View 7 Replies View Related

SSIS - Unable To Connect To The Remote Server

Mar 14, 2007

Hi,

I€™m using a Script Component in SSIS to call a Web Service. The web service is wrapped, using the wsdl tool. The package works, on my local enviroment. Script component calls the web service and returns the data. I€™ll move the web service to another server, web service as Anonymous access is enable. Deployed the Package on a SQL server. But, when excuting the package I get the below error. I can view and invoke the web method and see data even. SSIS is running under a NT AUTHORITYNetworkService account. I know that the problem is permission, but how would I resolve the issue.

Error:
OnInformation,SERVER,DOMAINSqlAdmin,MISPackage,{190832FB-4FF1-4ECD-BF53-4A49864089B4},{D7BF27CD-BDF1-418A-ABFE-BA0A24B921FB},3/14/2007 10:59:11 AM,3/14/2007 10:59:11 AM,0,0x,System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.Service.GetMISAccounts()
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.ScriptMain.CreateNewOutputRows()

Any Help will be appreciated

View 1 Replies View Related

Setup And Upgrade :: Unable To Make Remote Connections

Apr 26, 2015

For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. i need to get SQL server up and running.

View 2 Replies View Related

Unable To Remote Connect, SQL Server, Error: 1326

Nov 18, 2006

SQL Express running on Server 2003 SP1, not a domain controller - but prior to installing SQL Express, I did dcpromo promote and then demoted it back to a workgroup server.

Connecting with Vista build 5600, Studio express 9.00.2047 with MDAC 6.00.5600.1638. Server 2003 MDAC is 2.82.1830.

I came across this article on the net:

http://www.developersdex.com/sql/message.asp?p=1867&ID=%3C309C7496-F36B-4398-9C52-322E6CB8DE3B%40microsoft.com%3E

Is my mis-matched versions of MDAC causing me this grief?

Otherwise, I have remote set up for TCP and Named Pipes, I've run sp_configure 'remote admin connections', 1; my login is set to SQL Authentication with everything granted. I've tried running the service as network, local and MachineAdministrator; ports are open per:

http://support.microsoft.com/kb/555585

I wanted to ask before I start replacing the MDAC on either the Vista or Server 2003 machine... If that's the problem, which version(s) do I change? to?

Full error message:

An error has occurred while establishing a connection to the server. While connecting to SQL Server 2005, this failure may be cuased by the fact that under the default settings SQL Server does not allow remote connecitons, (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 1326)

Thanks, John



View 7 Replies View Related

HTTP Connection Manager Err:unable To Connect To Remote Server

Jan 23, 2007



Hi all,

i am trying to consume an webservice which under secure layer (HTTPS)

eg: https://test.com/test.asmx

i'm connected thro' a proxy server.

when i use the same url in IE it works fine, but when i connect thro' http connection manager it always throws me a error saying "unable to connect to remote server "

can anyone provide me solution to over come this problem

View 1 Replies View Related

Unable To Connect To Remote Report Server From Windows Forms App

Jan 14, 2008

Hello Everyone,

I have a Report Server setup on my laptop (XP Pro SP2). I have developed a report which I would like to view from a Windows Forms Application (VB.NET) using a ReportViewer. When I try it from the local machine it works correctly, but if I try to connect and preview the same report from my other PC (Vista Home Premium) I am getting the "Unable to connect to the remote server. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because the connected host failed to respond." error.

I have setup the Processing mode to Remote and correctly setup the ReportPath and ReportServerUrl using:

With rptRetEmp
.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Remote
.ServerReport.ReportServerUrl = New Uri("http://192.168.1.2/CPMReports")
.ServerReport.ReportPath = "/CPM_Reports/Test"
.ServerReport.Refresh()
.RefreshReport()
End With

Where CPMReports is the Report Server virtual directory and CPM_Reports is the folder where the report Test resides.

I do not know if this has anything to do with the fact that Vista Home does not have Report Services enabled or it is just a permissions problem. I have red several posts that describe similiar problems, but I could not find a solution.

Thank you for your help.

Daniel D.

View 1 Replies View Related

Configure Reporting Service - Unable To Connect To The Remote Server

Feb 20, 2008

Vista + SQL Server 2005
Reporting Service Configuration Tool: No Red Cross.
http://localhost/reportserver get this error:
HTTP Error 403.1 - Forbidden
You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run.
http://localhost/reports get this error:
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)



I googled but not found anything useful.
Thanks in advance!!!

View 8 Replies View Related

Recovery :: Unable To Connect To Availability Group Listener From Remote Server Without Using FQDN

Jul 21, 2015

Environment: SQL Server 2014 on Windows Server 2012 R2.

We have our availability group configured and working.  However, when we try to connect to the AG listener from a remote server, we have to use the fully qualified domain name (FQDN) to connect.  We'd like to be able to connect just using the host name.  Interestingly, ping actually resolves the IP correctly for either.

View 3 Replies View Related

Replication :: Unable To Connect To Remote Distributor From Publisher Using Administrative Link Password?

Jan 29, 2008

I am not able to connect to Remote Distributor from Publisher using Administrative Link Password. I have configured the Distributor on 1 m/c and Publisher on another m/c. When i use the wizard to configure the publisher using remote distributor. I have also specified the same Admin Password link (distributor_admin) in the distributor m/c.
 
I am getting the following message:
 
TITLE: New Publication Wizard------------------------------
SQL Server could not connect to the Distributor using the specified password.

[URL]

------------------------------ADDITIONAL INFORMATION:

Connection to server [SANMENON] failed.OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "Login timeout expired".OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". (Microsoft SQL Server, Error: 21670)

[URL]

------------------------------BUTTONS:
OK------------------------------

View 12 Replies View Related

Unable To Access SQL Databse

Mar 2, 2007

Hi,
I have a SQL Server 2005 Express database dbase.mdf which I cannot access. It works fine in VWD and the development server using the following connection string: String connectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\dbase.mdf;Integrated Security=True;User Instance=True"But when the site is not on the development server but on IIS, I get a SqlException saying "User does not have permission to perform this action." when I execute the connection.Open() command. I find it extremely frustrating that something which works in the development server fails on the real server. Can anyone help me with this? Do I have to change my connection string, or perhaps set some permissions...I have already given the IUSR_MACHINENAME account and the ASPNET account full access to dbase.mdf. Surely this must be an issue that lots of people deal with... How do other people manage to log to access databases? Any help would be much appreciated.  Thanks,P1000

View 4 Replies View Related

Unable To Access Mdf(db) For The First Time

Feb 24, 2008

Hi All,
Which some 1 can help me this.
I've developed an application and everything work fine after deploy. But after restarted my PC, i'm unable to login to my application which tie to the xxx.mdf DB and prompt Database error with no description. Until when the i click second time, only i'm able to acess into it. What happened actually?

I'm using sql express as embedded db on my local pc. This is without any remoting access.

View 1 Replies View Related

Please Help With Remote SQL Access

Jul 22, 2005

Hi
I have a web application and SQL database on separate SQL 2000 server. I have no admin rights to these servers.The ISP gave me a VPN connection and password to manager my database.If i run the application from my home computer WITH the VPN connected the application works fine.However if i disconnect the VPN or try to run the application from the remote server i get this error:SQL Server does not exist or access deniedI have researched this problem extensively and CANNOT find a solution. The application and SQL 2000 database server are on different computers. The SQL user id and password are different from the VPN connection's.My web config looks like this:<?xml version="1.0" encoding="utf-8"?>
<configuration>
<appSettings>
<add key="mappedname" value="username"/>
<add key="mappedkey" value="password"/>
</appSettings>
<system.web>
<globalization fileEncoding="utf-8" requestEncoding="utf-8" responseEncoding="utf-8" />
</system.web>
</configuration>
And the application connection string is as follows:Dim usersql As String = System.Configuration.ConfigurationSettings.AppSettings("mappedname")
Dim passsql As String = System.Configuration.ConfigurationSettings.AppSettings("mappedkey")
connectionString = "data source=xxx.xxx.xxx.xxx;initial catalog=databasename;"
connectionString &= ";user id=" & usersql
connectionString &= ";password=" & passsql
I am obviously missing something. Not sure what or how to pass the permissions on properly.Can some kind soul please help me with this problemThank YouJeff

View 1 Replies View Related

Remote Access

Oct 26, 2000

How can I access Sql server via a remote access tools. I want to be able to use somekind of software to be able to work on a server as if I am physically there. I would appreicate your input about this issue.

Ali

View 1 Replies View Related

Unable To Access Web Application Remotely

Nov 2, 2006

I can't run my web application on remote pc which is connected in flan with my pc.It works on my local pc but it is not working on remote pc. i m geeting an error like as blowAn error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) i have used sql server 2000 for my database but i my getting error for sql server 2005 which i have never used in my web application.Here is the Exception detailsException Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)i have used coonection string as followsData Source=neptune;Initial Catalog=azim;User ID=saso can anyone give me soluion of this problem 

View 1 Replies View Related

Unable To Access SQL Server Express

Jun 14, 2007

I logged on to my SQL Server Express this morning and received the following error:
 Cannot connect to MICHELLEWSQLEXPRESS.
An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
 
What is interesting is that its on a local computer.  I followed one recommendation to enable the pipes and tcp but that didn't work either.  How do I change the default settings to allow remote connections (on a local computer) when I can't log into the server?

View 2 Replies View Related

Unable To Access Tables Or Do Insert

Nov 7, 2005

Hi,i'm at wit's end here.  My problem:I'm trying to do an insert into a table with ExecuteNonQuery and keep getting the error:"input string is not in correct format"I am trying to insert a string into sql server 2000 type varchar(length=50) and it won't work so instead I just decided to get a count on the number of records existing and I got the same error (see above) when I tried this.  The code for this last part:<CODE>
Dim MyCmd As New System.Data.SqlClient.SqlCommand.' other code here.......Dim TempSQL As String = "SELECT COUNT(*) FROM tblUsers"
MyCmd.CommandType = CommandType.Text
MyCmd.CommandText = TempSQLDim a As Object = MyCmd.ExecuteScalar()</CODE>I am really stuck on this and cant find the answer anywhere online.Cheers,Joe

View 13 Replies View Related

Unable To Access Database Anymore

Nov 14, 2007



Hi,

I'm unsure what happened, but I'm using SQL Server 05 Developer Edition. I've been working with a local database where I tried to add a clustered index on a huge table (about 50M records). Well, I had to stop the query since it was maxing out my work computer. Since then, I've been unable to open the database or run queries against it.

When I open SQL Server Management Studio the database says In Recovery. Once it's done, when I try to expand tables, I eventually get this error:

TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------



If I run a Select * from INFORMATION_SCHEMA.TABLES query, it will go on for a while

If I try to access the properties of the Database (right clicking), I get this error:

TITLE: Microsoft SQL Server Management Studio
------------------------------
Cannot show requested dialog.
------------------------------
ADDITIONAL INFORMATION:
Cannot show requested dialog. (SqlMgmt)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I'm unsure where to go from this point forward.

View 11 Replies View Related

Unable To Access SSIS Package

Aug 27, 2007

I (actually my DBA did it) have created an SSIS package in MS SQL Server 2005. It can be found under Integration Services under:



Stored Packages


MSDB


VisBridges


ExportTime
Using the Execute Package Utility, it runs perfectly.

I used the article at http://msdn2.microsoft.com/en-us/library/ms403355.aspx to build an application to run it.


My code includes the following (written in VB.Net):

a Web Service Function called LaunchPackage:


Public Function LaunchPackage(ByVal sourceType As String, _


ByVal sourceLocation As String, _

ByVal packageName As String) As Integer ' DTSExecResult



Dim packagePath As String


Dim myPackage As New Package()

Dim integrationServices As New Application



' combine path and file name


packagePath = Path.Combine(sourceLocation, packageName)



Select Case sourceType



Case "file"


' package is stored as a file.

' add extension if not present.

If String.IsNullOrEmpty(Path.GetExtension(packageName)) Then


packagePath = String.Concat(packagePath, ".dtsx")

End If





If File.Exists(packagePath) Then





myPackage = integrationServices.LoadPackage(packagePath, Nothing)

Else


Throw New ApplicationException("Invalid file location: " & packagePath)

End If

Case "sql"

' Package stored in MSDB.


' Combine logical path and package name.

If integrationServices.ExistsOnSqlServer(packagePath, <servername>, <UserID>, <password>) Then



myPackage = integrationServices.LoadFromSqlServer(packageName, <servername>, <UserID>, <password>, Nothing)

Else


Throw New ApplicationException("Invalid package name or location: " & packagePath)

End If

Case "dts"


' package is managed by SSIS Package Store.

' Default logical paths are File System and MSDB.






If integrationServices.FolderExistsOnDtsServer(packagePath, <servername>) Then


myPackage = integrationServices.LoadFromDtsServer(packagePath, <servername>, Nothing)

Else


Throw New ApplicationException("Invalid package name or location: " & packagePath)

End If

Case Else


Throw New ApplicationException("Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'.")

End Select


Return myPackage.Execute()

End Function

My TestPage includes the following:


Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click


Dim launchPackageService As New LaunchSSISPackageService

Dim packageResult As Integer

Dim sourceType As String = "dts"

'Dim sourceLocation As String = "M:mssqlssiconfig" ' for "file"

'Dim sourceLocation As String = "MSDBVisBridges" ' for "sql"

Dim sourceLocation As String = "VisBridges" ' for "sql & dts"

'Dim sourceLocation As String = "MSDB"



If rdoCreateTimeTrans.Checked Then



Try


packageResult = launchPackageService.LaunchPackage(sourceType, sourceLocation, "ExportTime")

Catch ex As Exception


Response.Write("The following exception occurred: " & ex.Message)

End Try


End If

End Sub

I've tried both "sql" and "dts" with all the various permutations that are listed (and commented out) above. I either get an error that says:
The top level folder "VisBridges" is not found. ("dts" "VisBridges") -- or --
Invalid package name or location: MSDBVisBridgesExportTime ("dts" "MSDBVisBridges") -- or --
Cannot find folder "MSDBVisBridgesExportTime" ("sql" "MSDBVisBridges") -- or --
The specified package could not be loaded from the SQL Server database ("sql" "VisBridges")

Any assistance would be greatly appreciated.

Many thanks,
Michell

View 6 Replies View Related

Unable To Access Sqlcesa30.dll Under Https://

Apr 20, 2007

I'm unable to do a RDA.Pull() when I have the sqlcesa30.dll running under HTTPS. What are the requirements to allow me to pull with the dll under HTTPS?

what are the impacts running under https:?





View 4 Replies View Related

Unable To Access The Report Server

Oct 4, 2006

Hi Guys,

After installing SQL Server 2005 Reporting Services, I got the following errors:

1. When I tried to open http://localhost/reports/ , I got the following error message

The report server is not responding. Verify that the report server is running and can be accessed from this computer.

2. When I tried to open http://localhost/reportserver/ , I got the following error message

The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)

Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config' is denied.

Is there any clue for this technical problem?

Immediate response is appreciated.

--Amde



View 7 Replies View Related

Unable To Access Report Manager

May 4, 2006

Hi

I'm able to get into Report Server but when I try to access the Report Manager with the same logon I get the following error:

"An error occurred while attempting to get the ReportServer Url."

Can anyone shine any light on this please?

Thanks

View 3 Replies View Related

Unable To Access D Drive In Server

May 28, 2015

I have two drives in SQL Server Box. C and D drives. I am using below script to move mdf and log files from C: drive to D: Drive. However, I keep getting error : Directory lookup for the file "D:PackagesTestVGR.mdf" failed with the operating system error 5(Access is denied.).

USE MASTER;
GO
-- Take database in single user mode -- if you are facing errors
-- This may terminate your active transactions for database
ALTER DATABASE TestVGR

[code]...

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved