Unable To Access Database Anymore
Nov 14, 2007
Hi,
I'm unsure what happened, but I'm using SQL Server 05 Developer Edition. I've been working with a local database where I tried to add a clustered index on a huge table (about 50M records). Well, I had to stop the query since it was maxing out my work computer. Since then, I've been unable to open the database or run queries against it.
When I open SQL Server Management Studio the database says In Recovery. Once it's done, when I try to expand tables, I eventually get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
If I run a Select * from INFORMATION_SCHEMA.TABLES query, it will go on for a while
If I try to access the properties of the Database (right clicking), I get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Cannot show requested dialog.
------------------------------
ADDITIONAL INFORMATION:
Cannot show requested dialog. (SqlMgmt)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I'm unsure where to go from this point forward.
View 11 Replies
ADVERTISEMENT
Nov 10, 2006
Hi,
I installed the dts designer component for 2005 so I could migrate over some 2000 packages and was able to successfully open and run dts packages under 2005.
Then all of a sudden I get this error msg and can't open them, migrate them, export them, etc:
"here were errors loading the package "MyPackageName":
[DNETLIB][ConnectionOpen (Invalid Instance()).] Invalid connection.
(Microsoft.SqlServer.DtsObjectExporerUI)"
That is not a typo, it actually says "here were errors..." instead of "There were errors..."
I've tried the obvious, repair the dts designer component and rebooting, no luck.
Anybody seen this?
Hope this is the right group to post to...
Thx
View 5 Replies
View Related
Jul 20, 2005
Hi,SQL Server 2000 SP3Windos 2000 Server SP4I have a DTS package that imports data from a dBase IV databse withfiles located in two folders (dBF1 and dBF2). I use a transform datatask to transform the data.They were running properly, but last week we installed W2K SP4, andnow the transform task for files from dBF2 are not working properly.I have two tranform tasks to extract data from files in dBF2 folder.If I double click to open the transform data task of either of them,Enterprise Manager crashes with the errrormmc.exe applicatio ErrorThe instruction "xxxx" referenced memory at "xxx". The memory couldnot be read.Althoug the transform task for one of the files will run, the otherwill not run giving the messageError Source: DTS packageCatastrophic failureAlso, I have an Access database that has links to the same dBasefiles. For files from dBF2 folder, I'm able to see the data from oneof the files, but if I double click to see the data from the other,access crashes with no specific error message. Nothing has changed ondBase related files (permission wise).The transform tasks to extract data from the other dBase folder (dBF1)files are working fine, and data is accesible from Access.Any advice how to tackle this one?
View 2 Replies
View Related
Nov 18, 2004
I have the following code in my ASP program
dbRows = Server.CreateObject("ADODB.Recordset");
dbRows.Open( dbCmd );
dbCmd.Parameters.Delete("@reset");
newUser=((dbRows.EOF) || ((!dbRows.EOF) && (dbRows("isActive").value != 1)) )
if ( newUser ) {
if(Request.ServerVariables("SCRIPT_NAME") != "/profile_edit.asp" ) {
Response.clear();
Response.Redirect("/newuser.asp");
}
} else {
Session("logon_user") = Request.ServerVariables("LOGON_USER")+"";
Session("fullname") = dbRows("full_name").value;
Session("email") = dbRows("email_address").value;
Session("q1") = dbRows("q1").value == " " ? "" : dbRows("q1").value;
Session("q2") = dbRows("q2").value == " " ? "" : dbRows("q2").value;
Session("q3") = dbRows("q3").value == " " ? "" : dbRows("q3").value;
Session("ct") = dbRows("ct").value == " " ? "" : dbRows("ct").value;
Session("so") = dbRows("so").value == " " ? "" : dbRows("so").value;
Session("graphic_level") = 3;
Session("er_view") = dbRows("er_view").value;
dbRows.close();
gLev=Session("graphic_level");
dbCmd.CommandText = "knet_user_setLastLogin"
dbCmd.Execute();
This same code used to work but doesn't anymore. The connection times out and the error points to the dbCMD.Execute command. Here same things I have found:
1. If I point the database calls to the development server it works. If I point the database calls to the production server it fails. I am to get to production through other calls just fine.
2. If I comment out the dbCmd.Execute or dbCmd.CommandText = "knet_user_setLastLogin" seperately the code works.
What is the dbCmd.Execute doing when it is called?
Could it be a problem with the store procedure?
Could it be a software upgrade on the Database server that is causing the problem?
Your help will be greatly appreciated.
Thanks,
Craig-
View 4 Replies
View Related
Mar 1, 2007
The reason I had to start a new thread was that the old thread seems to be closed. There is no "Reply" button showing.
I still have the same problem. The last post asked if I was sure I was using SQLExpress.
I only have SQLEXPress and I have never had anything else. Therefore the question becomes - Why does the system seem to think I have another version?
Alan
View 1 Replies
View Related
Jun 22, 2015
I'm trying to connect to a database using a service account that we got created. The ID is an AD account and was added to the db as such. When I try to connect to the database using the account with the password I get [login failed for domainid]. The DBA mentioned that its setup to use windows auth, however, I can't connect with this service account using windows Auth, due to I'm using to connect via code.
How can I connect to the database from my code using this ID?
I have the ID and pwd in my code to connect with, does the ID have to be setup differently in the Database?
View 1 Replies
View Related
Jun 16, 2007
I have a login that is mapped to a Windows sysadmin account. I used it to login to Sql Server 2005. I then created a database called Freedom. I then added a Windows login and user called FreedomAdmin, with Freedom set as the default database. When I login in to Windows using FreedomAdmin and then try to login in to Sql Server 2005, I get the following error:
The server principal "FREEDOM1FreedomAdmin" is unable to access the database "master" under the current security context.
If the default database for FreedomAdmin is Freedom (and it is - I checked from my sysadmin login account), why can't I login. Must I give FreedomAdmin permissions to master?
View 6 Replies
View Related
Nov 18, 2006
I have a database that is in mssql and I'm using an odbc link to an access database where I want to add records to the mssql table. When I open the linked table in access it does not allow me to add a record. I have created a user account in mssql that has ownership to the database and I use this user in setting up the odbc link.
View 3 Replies
View Related
May 7, 2008
Hello there,
I've some really big problems with SQL Server 2005 Express. I Recently, I had 2 instances on my machine, one was a SQL Server 2000 Developer and the other a 2005 Express Version. The 2000 version was not necessary anymore, so I unstalled it, since then, the Express version keeps having probems.
Under the Server Properties -> Database settings -> Database Locations I've changed the path to D:sqldatamssql, but now, the programm always takes the "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" to store and load the databases, no matter what I do.
And there are more problems see here:
Restoring does not work=======================
I wanted to restore a database called "fw40_admin" from a backup file (.bak), but that didn't work at all, it always says this as an error:
"System.Data.SqlClient.SqlError: The operating system returned the error '5(error not found)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'D:sqldatamssqlfw40_admin.mdf'. (Microsoft.SqlServer.Express.Smo)"
But as soon as I type in the installation path "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" inside the "Restore As" under "Options", it works.
Why does the backup only work in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData", BUT the database locations under the server properties is indicated with "D:sqldatamssql"????
Attaching does not work=======================
Attaching an existing database does not work either. Most databases (mdf) are located on the path D:sqldatamssql, but as soon as I press
Attach Databases -> Add
The dialog window appears with the "D:sqldatamssql" path, but it is unable to find any *.mdfs altough THERE ARE .mdfs in this directory. But Express can find databases in the selected installation: "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData".
Why can't Express see the directory on the D: partition???
What is wrong? Here? Can anybody help me?
View 5 Replies
View Related
Nov 22, 2006
Hi all,
I encounter a problem of unable to access Remote Server after i placed my web application into the web server.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
So I googled and tried lot of different ways of connecting.By piped name, IP, trying instance which that server don't even have one :X.I also tried typing in cmd > telnet localhost 1433It appeared that the telnet fail, i tried it on other machine, it works. So is it cause by denied of access through that port?I checked at the sql client network, it show 1433, i check the server too, it show 1433.I also checked if there's any firewall, it appear there is no firewall at all.The sql server i trying to connect is SQL 2000, it run by Windows Server 2003
Any advise or more information you needed to help me solve this problem?Thanks
View 1 Replies
View Related
Mar 2, 2007
Hi,
I have a SQL Server 2005 Express database dbase.mdf which I cannot access. It works fine in VWD and the development server using the following connection string: String connectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\dbase.mdf;Integrated Security=True;User Instance=True"But when the site is not on the development server but on IIS, I get a SqlException saying "User does not have permission to perform this action." when I execute the connection.Open() command. I find it extremely frustrating that something which works in the development server fails on the real server. Can anyone help me with this? Do I have to change my connection string, or perhaps set some permissions...I have already given the IUSR_MACHINENAME account and the ASPNET account full access to dbase.mdf. Surely this must be an issue that lots of people deal with... How do other people manage to log to access databases? Any help would be much appreciated. Thanks,P1000
View 4 Replies
View Related
Feb 24, 2008
Hi All,
Which some 1 can help me this.
I've developed an application and everything work fine after deploy. But after restarted my PC, i'm unable to login to my application which tie to the xxx.mdf DB and prompt Database error with no description. Until when the i click second time, only i'm able to acess into it. What happened actually?
I'm using sql express as embedded db on my local pc. This is without any remoting access.
View 1 Replies
View Related
Apr 5, 2000
I've got SQL 7.0 installed on a desktop to develop DTS packages. I've been using it fine for a month or so. Now, all of the sudden, I cannot connect to the server using Enterprise Manager, SQL Analyzer or anything. I get an error stating 'Connection could not be established: ConnectionTransact(GetOverLappedResult())'. The error log states that the max number of connections has been reached. Also, when restarting the server, there is an inticonfig statement that's says it's only allowing one connection. Why? Nobody/nothing else is connected to this server. How do I change it so it'll allow more than one connection? I can't connect to change this setting.
Any help would be appreciated.
Thanks,
sjl
View 1 Replies
View Related
Oct 24, 2000
Hi,
I'm using SQL Server 7 and have it installed on one PC, Not networked.
Without any explanation Enterprise manager won't let me look at my databases. It lets me look at a server on the web but not my own Server on this PC.
It has worked without any problems until now. I receive this message when I try and look at the servers databases.
**A connection could not be established to H3G5Z8- Cannot open user default database <ID> using master database instead.
Please verify SQL Server is running and check your Server Registration properties.
*********************
Total mystery right out of the blue.
Appreciate any help you could give me.
Steve
View 2 Replies
View Related
Jul 20, 2005
I rebuilt my machine a few weeks back - re-installed the developer version...The app in question can see all it's tables in the SQL back end via ODBC andeverything looks normal via Enterprise Manager, but I can no longer createan ADO Connection.Source code is unchanged, what's changed is the PC rebuild and consequentre-installatin of SQL Server developer version.I suspect it's something to do with the provider (at least that's the only thingI can see in the .Connect string that's not verifiably correct....)The error looks like this after I trap and format it:-----------------------------------------------------------------12/30/03 21:34:30v0.71 Userid: UPQC on SAGProc: basADO: ADO_ConnectionCreate-2147467259: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server doesnot exist or access denied.Errors encountered when trying to connect:''''''''''[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist oraccess denied.----------Connect String:Provider=SQLOLEDB.1;SERVER=SAG;DATABASE=TRETS;UID= Trets;PWD=trets-----------------------------------------------------------------Can anybody see anything obvious to look for?I'm thinking I need to know how to verify/validate the presence of provider"SQLOLEDB.1"... But how?--PeteCresswell
View 1 Replies
View Related
Feb 26, 2007
Hi all,
I've installed SP2 on my server. If I run the package on the server, the package worked there before the installation of SP2. Now with SP2 it doesn't work anymore. In VS2005 on my computer the package works before and after the installation of SP2.
He gives an error with the execution of a sql-task on an oracle server:
Error :Executing the query "insert into cube_content values (trim(?), trim(?), trim(?), trim(?), trim(?), sysdate) failed with the following error: "ORA-01401: inserted value too large for column". Possible failure reasons: Problems with the query, "ResultSet property not set correctly, parameters not set correctly, or connection not established correctly.
Anybody an idea?
Thanks,
Dennis
View 3 Replies
View Related
Nov 2, 2006
I can't run my web application on remote pc which is connected in flan with my pc.It works on my local pc but it is not working on remote pc. i m geeting an error like as blowAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) i have used sql server 2000 for my database but i my getting error for sql server 2005 which i have never used in my web application.Here is the Exception detailsException Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)i have used coonection string as followsData Source=neptune;Initial Catalog=azim;User ID=saso can anyone give me soluion of this problem
View 1 Replies
View Related
Jun 14, 2007
I logged on to my SQL Server Express this morning and received the following error:
Cannot connect to MICHELLEWSQLEXPRESS.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
What is interesting is that its on a local computer. I followed one recommendation to enable the pipes and tcp but that didn't work either. How do I change the default settings to allow remote connections (on a local computer) when I can't log into the server?
View 2 Replies
View Related
Nov 7, 2005
Hi,i'm at wit's end here. My problem:I'm trying to do an insert into a table with ExecuteNonQuery and keep getting the error:"input string is not in correct format"I am trying to insert a string into sql server 2000 type varchar(length=50) and it won't work so instead I just decided to get a count on the number of records existing and I got the same error (see above) when I tried this. The code for this last part:<CODE>
Dim MyCmd As New System.Data.SqlClient.SqlCommand.' other code here.......Dim TempSQL As String = "SELECT COUNT(*) FROM tblUsers"
MyCmd.CommandType = CommandType.Text
MyCmd.CommandText = TempSQLDim a As Object = MyCmd.ExecuteScalar()</CODE>I am really stuck on this and cant find the answer anywhere online.Cheers,Joe
View 13 Replies
View Related
Aug 27, 2007
I (actually my DBA did it) have created an SSIS package in MS SQL Server 2005. It can be found under Integration Services under:
Stored Packages
MSDB
VisBridges
ExportTime
Using the Execute Package Utility, it runs perfectly.
I used the article at http://msdn2.microsoft.com/en-us/library/ms403355.aspx to build an application to run it.
My code includes the following (written in VB.Net):
a Web Service Function called LaunchPackage:
Public Function LaunchPackage(ByVal sourceType As String, _
ByVal sourceLocation As String, _
ByVal packageName As String) As Integer ' DTSExecResult
Dim packagePath As String
Dim myPackage As New Package()
Dim integrationServices As New Application
' combine path and file name
packagePath = Path.Combine(sourceLocation, packageName)
Select Case sourceType
Case "file"
' package is stored as a file.
' add extension if not present.
If String.IsNullOrEmpty(Path.GetExtension(packageName)) Then
packagePath = String.Concat(packagePath, ".dtsx")
End If
If File.Exists(packagePath) Then
myPackage = integrationServices.LoadPackage(packagePath, Nothing)
Else
Throw New ApplicationException("Invalid file location: " & packagePath)
End If
Case "sql"
' Package stored in MSDB.
' Combine logical path and package name.
If integrationServices.ExistsOnSqlServer(packagePath, <servername>, <UserID>, <password>) Then
myPackage = integrationServices.LoadFromSqlServer(packageName, <servername>, <UserID>, <password>, Nothing)
Else
Throw New ApplicationException("Invalid package name or location: " & packagePath)
End If
Case "dts"
' package is managed by SSIS Package Store.
' Default logical paths are File System and MSDB.
If integrationServices.FolderExistsOnDtsServer(packagePath, <servername>) Then
myPackage = integrationServices.LoadFromDtsServer(packagePath, <servername>, Nothing)
Else
Throw New ApplicationException("Invalid package name or location: " & packagePath)
End If
Case Else
Throw New ApplicationException("Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'.")
End Select
Return myPackage.Execute()
End Function
My TestPage includes the following:
Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
Dim launchPackageService As New LaunchSSISPackageService
Dim packageResult As Integer
Dim sourceType As String = "dts"
'Dim sourceLocation As String = "M:mssqlssiconfig" ' for "file"
'Dim sourceLocation As String = "MSDBVisBridges" ' for "sql"
Dim sourceLocation As String = "VisBridges" ' for "sql & dts"
'Dim sourceLocation As String = "MSDB"
If rdoCreateTimeTrans.Checked Then
Try
packageResult = launchPackageService.LaunchPackage(sourceType, sourceLocation, "ExportTime")
Catch ex As Exception
Response.Write("The following exception occurred: " & ex.Message)
End Try
End If
End Sub
I've tried both "sql" and "dts" with all the various permutations that are listed (and commented out) above. I either get an error that says:
The top level folder "VisBridges" is not found. ("dts" "VisBridges") -- or --
Invalid package name or location: MSDBVisBridgesExportTime ("dts" "MSDBVisBridges") -- or --
Cannot find folder "MSDBVisBridgesExportTime" ("sql" "MSDBVisBridges") -- or --
The specified package could not be loaded from the SQL Server database ("sql" "VisBridges")
Any assistance would be greatly appreciated.
Many thanks,
Michell
View 6 Replies
View Related
Apr 20, 2007
I'm unable to do a RDA.Pull() when I have the sqlcesa30.dll running under HTTPS. What are the requirements to allow me to pull with the dll under HTTPS?
what are the impacts running under https:?
View 4 Replies
View Related
Oct 4, 2006
Hi Guys,
After installing SQL Server 2005 Reporting Services, I got the following errors:
1. When I tried to open http://localhost/reports/ , I got the following error message
The report server is not responding. Verify that the report server is running and can be accessed from this computer.
2. When I tried to open http://localhost/reportserver/ , I got the following error message
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config' is denied.
Is there any clue for this technical problem?
Immediate response is appreciated.
--Amde
View 7 Replies
View Related
May 4, 2006
Hi
I'm able to get into Report Server but when I try to access the Report Manager with the same logon I get the following error:
"An error occurred while attempting to get the ReportServer Url."
Can anyone shine any light on this please?
Thanks
View 3 Replies
View Related
May 28, 2015
I have two drives in SQL Server Box. C and D drives. I am using below script to move mdf and log files from C: drive to D: Drive. However, I keep getting error :Â Directory lookup for the file "D:PackagesTestVGR.mdf" failed with the operating system error 5(Access is denied.).
USE MASTER;
GO
-- Take database in single user mode -- if you are facing errors
-- This may terminate your active transactions for database
ALTER DATABASE TestVGR
[code]...
View 7 Replies
View Related
Dec 20, 2005
Hi,
I have SQL Server 2005 installed and functioning (it does everything I've asked it to do locally). I also have the Express and Standard Editions installed on a computer running WinXPPro SP2 with all the WinUpdates applied. I also have VS2005 installed on this computer. I've done some development work on this computer, using VS2005 to create a SQLDB, connect to it, add data, etc. This is all okay.
The problem is I cannot connect to the SQL Server from the client computer. I installed the client tools on this XP Pro box along with all the WinUpdates. Here's what I can do...
I can ping the SQL Server by name (the name gets resolved).
I can copy files between the two computers using Explorer.
I enabled "Allow remote connections to this server" in the Server Properties / Connections page.
I did not change the default port of 1433.
The TCP/IP protocal is enabled in the Configuration Manager.
The Surface Area has been configured to allow local and remote connections using TCP/IP and named pipes.
SQLBrowser surface is running as is the MSSQLSERVER service.
So what's going on? I am new to SQL Server to it may be something very simple / obvious.
Thanks for your help,
Scott
View 4 Replies
View Related
Jul 3, 2007
I have an ASP.NET/ADO.NET page i wrote. It was based off of the development database during most development, and it switched over seamlessly to the production database.
Except for yesterday, when i went back to edit the page. It simply stopped returning results on my queries. To see if it was caused by bad values being passed to the sqldatasource, i tried it in the "Configure Data Source..." window, and it returns zero rows. When passing all of the exact same parameters to the same procedure in the same DB engine, even using the same login information, it works.
Just not in my ADO.NET app anymore...
Can anyone tell me what the hell could be going on here, please? I already rebuilt the page from an older version this morning, being very minimal on changes, and the last thing i changed before it stopped working was the connection string... *BUT* I have triple-checked that against the canon string we have always used in every working copy.
I'm losing a lot of hair over this . Any help would be greatly appreciated.
Thanks in advance
stoland
View 2 Replies
View Related
Nov 15, 2006
Hello,
Yesterday I made the HelloWorld_CLR sample work and figured today I would create a simple windows service to immulate its functionality. When this was not working I tried the sample again and it stopped working. I have tried several things and nothing has worked. Has anyone seen this before or have any ideas on how I can get it working again? I even tried removing SQL Server and its samples then reinstalling to give me a clean slate but that did not work. I did not make any changes to the software nor did I make any changes to the database however the sample did so I need to make sure I can fix this incase it happens in development not to mention I need to continue development.
The Client Queue is normally empty but sometimes has a request to two in it. The Server Queue has alot in it that are both Request and an unspecified type or has a URL for a type. I would paste it in but it takes too much space. Please let me know if you have any ideas because I am not sure what else to try.
Bellow is a sample of the output from running this sample.
Connecting to SQL Server instance
Connected to SQL Server instance
Transaction 1 begun
Dialog begun from service (HelloWorldClient) to service (HelloWorldService)
Message sent of type 'Request'
Transaction 1 committed
Transaction 2 begun
Waiting for Response....
No message received - Ending dialog with Error
Transaction 2 committed
Connection closed - exiting
Press Enter to Exit
Thanks,
Scott Allison...
View 3 Replies
View Related
Oct 13, 2007
When I try to run my report manager which is in my local machine, I get the following error message.
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) Get Online Help
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I can not open Report server data base and reportserver temperary data base, even in Management Studio. I can not see them there anymore.
Also When I try to open data base engine in my local machine through Management Studio, I can not open it. I get the following error massege.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Recently, I changed data base connection properties of all my reports. coz earlier I used a data base which was in the local machine. But then I connected all my reports to the same data base which is on another server. Then I changed all connection properties of each report. After that I deleted the data base in the local machine.
Would that be the reason for this problem?
Also SLQ server(MSSQLSERVER) and SQL Server Agent has been stopped running. I can not start it from SQL Server Configuration Manager.
Please can anyone tell me how to fix this problem and get my work done as usual?
View 6 Replies
View Related
Apr 11, 2008
I am unable to acces Oracle from legacy DTS designer, here is what I have done,
1. I have kept my old DTS packages in SQL2K5 legacy DTS container
2. Now I am unable to access oracle; it gives provider error
3. I am able to connect oracle from SQLPLUS
How can I troubleshoot this problem?
------------------------
I think, therefore I am - Rene Descartes
View 7 Replies
View Related
Oct 8, 2006
Hi, when I am using the Report Manger to open a report, I am unable to acess the Database from my .Net application and vice versa - error report from MS Visual Web developer - "Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
View 1 Replies
View Related
Nov 13, 2007
I've lost access to SSIS and BIDS.
I'm a SQL 2005 developer DBA with a 1.5 years experience with SQL Server 2005. It has been a while since I needed to use SSIS. I used it with no problems earlier this year when I was managing the team conversion to SQL Server 2005. Now it no longer appears on my START > Programs > SQL Server 2005 menus. I had to reinstall SQL Server 2005 and Visual Studio 2005 months ago and must have lost it then some how.
How do I get access to BIDS and SSIS again?
SQL Server Integrated Services shows up in my Services list as running.
I've already tried Add/Remove Programs to drop that component from SQL Server 2005, reboot, Add it back, reboot. Still does not show up in my menus and the Service is running. The Setup Bootstraplog summary for this effort shows no failures and shows this:
Product : Microsoft SQL Server 2005 Integration Services
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_xxxx-xxxx_DTS.log
My SQL Server level is 9.0.3054. The About Info is:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.832
Operating System 5.1.2600
My Visual Studio About Info is:
Microsoft Visual Studio 2005
Version 8.0.50727.762 (SP.050727-7600)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: Professional
Microsoft Visual Basic 2005 77626-009-0096213-41845
Microsoft Visual Basic 2005
Microsoft Visual C# 2005 77626-009-0096213-41845
Microsoft Visual C# 2005
Microsoft Visual C++ 2005 77626-009-0096213-41845
Microsoft Visual C++ 2005
Microsoft Visual J# 2005 77626-009-0096213-41845
Microsoft Visual J# 2005
Microsoft Visual Web Developer 2005 77626-009-0096213-41845
Microsoft Visual Web Developer 2005
Microsoft Web Application Projects 2005 77626-009-0096213-41845
Microsoft Web Application Projects 2005
Version 8.0.50727.762
Crystal Reports AAC60-G0CSA4B-V7000AY
Crystal Reports for Visual Studio 2005
Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB937061)
Also, in case it is relevant, I've NEVER installed SQL Server Express or had it installed.
When I reinstalled, I installed SQL Server 2005 before VS 2005 since I know that has caused problems with some people.
Please help me get SSIS and BIDS access again.
Thanks,
Paul
View 6 Replies
View Related
Oct 22, 2006
Not sure if this is the right forum to post this...
After going through lot of old posts in various forums and changing lot of settings, i'm still not able to access my Server remotely.
This is Windows 2003 Server machine with Sonicwall Firewall, i have allowed Port 1433 in both Firewall and ISA and call is getting through but i'm getting following error msg :-
{"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"}
This machine is also having Sql Server 2000, and the SQL Server 2005 is installed with named instance.
My connection string is :-
"Data Source=192.168.0.1MYSERVER;Initial Catalog=MyDatabase;Integrated Security=True"
In example above, i'm showing dummy values but actual string is having the actual live IP address and correct named instance and database.
If i use a local address like 192.168.0.1 then i'm able to connect.
My TCP/IP Address in Sql configuration is having my Live IP Address and the port 1433.
Any help will be highly appreciable..
View 16 Replies
View Related
Feb 26, 2007
I didn´t know where to put this so sorry if this is not the appropriate place.
I am running Windows XP pro sp2 with visual studio 2005, ms sql server 2005, and a number of other applications.
My problem is that I am not allowed to install new windows components(I want to install IIS). When I try to access from either control panel, add/remove programs, Install new windows components or directly from the winXP cd I get the following error in a pop-up form and I can only press "OK":
"Another copy of Setup is already running. Complete the other Setup or restart Windows."
I am not running the instance more than once. I do this as the first thing after a restart with the same result. When looking at the processes in the task manager I cant see anything unusual.
It is a pretty slow computer so that may have something to do with it - some timeout or similar.
It is getting pretty frustrating so any suggestions are more than welcomed! thanks.
EDIT: I used process explorer to locate some stalled windows update process which I killed. Then msmqocm.inf was missing, but that seems to be a FAQ.
View 3 Replies
View Related
