Unable To Access MSSQLSERVER From Client
Dec 20, 2005
Hi,
I have SQL Server 2005 installed and functioning (it does everything I've asked it to do locally). I also have the Express and Standard Editions installed on a computer running WinXPPro SP2 with all the WinUpdates applied. I also have VS2005 installed on this computer. I've done some development work on this computer, using VS2005 to create a SQLDB, connect to it, add data, etc. This is all okay.
The problem is I cannot connect to the SQL Server from the client computer. I installed the client tools on this XP Pro box along with all the WinUpdates. Here's what I can do...
I can ping the SQL Server by name (the name gets resolved).
I can copy files between the two computers using Explorer.
I enabled "Allow remote connections to this server" in the Server Properties / Connections page.
I did not change the default port of 1433.
The TCP/IP protocal is enabled in the Configuration Manager.
The Surface Area has been configured to allow local and remote connections using TCP/IP and named pipes.
SQLBrowser surface is running as is the MSSQLSERVER service.
So what's going on? I am new to SQL Server to it may be something very simple / obvious.
Thanks for your help,
Scott
View 4 Replies
ADVERTISEMENT
Aug 12, 2007
All,
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it
and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
Thank for all help received in advance,
Dave.....
View 2 Replies
View Related
Jul 29, 2006
I just did a fresh install of SQL Server 2005 Developer Edition and SP1. I elected Windows auth during install. After rebooting I get 2 errors in my Application Event Log: MSSQLSERVER Login failed for user 'COMPUTERuser'. [CLIENT: <local machine>] (event ID 18456) and Report Server Windows Service (MSSQLSERVER) (event 107) which says: Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database. In the data section it says it can't connect to the machines "master" database. I can manually login. How can I fix the problem and get rid of these messages? Thanks. Mark
View 11 Replies
View Related
May 2, 2006
On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS
Client unable to establish connection
Encryption not supported on SQL Server. (Microsoft SQL Native Client)
I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?
View 2 Replies
View Related
Dec 24, 2007
hi, all.I want to verify data merged from access in sqlserver.but it has toomany records .so i need a tooldo this.someone maybe has it.thanks
View 1 Replies
View Related
Apr 7, 2000
Here are the error messages:
Enterprise Manager:
A connection could not be established to SERVERNAME - Client unable
to establish connection ConnectionOpen (CreateFile())
Query Analyzer:
Unable to connect to server ServerName
Server Msg 67, Level 16, State 1
[Microsoft][ODBC SQL Server Driver]Client unable to establish connection
I can't register any other new servers, even ones in my workgroup. I'm connecting using named pipes, but have also tried using TCP/IP setting it up using Client Network Utility.
When i log on to another machine using my network login - I can connect.
There have been no problems connecting in the past and I haven't changed anything on my machine - any ideas???
View 1 Replies
View Related
Oct 18, 2000
Hi Guys.
We have a clustered server. When i create DTS packages in the secondary server I can get all the connection. But when i create DTS package that has connection to other servers. I am getting the follwing error. So my jobs that runs the DTS packages are failing.
Error Source: Microsoft OLE DB Provider for sql server
Error Description: Client Unable to establish connection.
Connectionopen(createfile())
I deleted all the entries in the Client network utility and recreated with ip addresses and TCP/IP protocol.
Added all the ip addresses to Lmhosts and host files.
Check the Server Network Utility.
I dont have a clue now.
Anyhelp are well appreciated.
-Thanks
-MAK
View 4 Replies
View Related
Nov 27, 2007
Hi,
I have a Visual C# WinForms app which I am accessing a SQL Server 2005 database with. On the Server, I have allowed remote connections (TCP and named pipes) and enable SQL Browser as per instructions on MSDN. The app works fine on the development machine.
Server name is <machine name>SQLEXPRESS, connecting with Windows Authentication.
Server log states that it is listening on [ 'any' <ipv4> 3153].
Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].
On the client (local network), when trying to open the database I get this error still:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Also on the client, I can go into the ODBC Data Source Administation, and connect to the SQL Server Database that way successfully.
What further steps can I take to allow the client to access the SQL Server?
Andrew
View 1 Replies
View Related
Dec 18, 2005
HELP!
I'm new to SQL Server and I'm sure this is a simple problem.
But I can't seem to solve it.
Here's the problem:
My website & MS SQL 2000 Server are being hosted by Networksolutions.
Thru the Client Enterprise Manager I am Unable to create a New Table.
This is the error message I get:
" [MS Design Tools]-ODBC error: [Microsoft] [ODBC SQL SERVER DRIVER] [SQL SERVER] SELECT permission denied on object 'sysobjects', database 'namedb', owner'db' " :confused:
View 2 Replies
View Related
Nov 27, 2007
Hi,
I have a Visual C# WinForms app which I am accessing a SQL Server 2005 database with. On the Server, I have allowed remote connections (TCP and named pipes) and enable SQL Browser as per instructions on MSDN. The app works fine on the development machine.
Server name is <machine name>SQLEXPRESS, connecting with Windows Authentication.
Server log states that it is listening on [ 'any' <ipv4> 3153].
Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].
On the client (local network), when trying to open the database I get this error still:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Also on the client, I can go into the ODBC Data Source Administation, and connect to the SQL Server Database that way successfully.
What further steps can I take to allow the client to access the SQL Server?
Andrew
View 1 Replies
View Related
May 2, 2008
As long as the output file is written to the local client, it completes successfully. But after changing the UNC path to another server with or without fully qualified names it is unable to open BCP host data-file. (sample shown below)
-----------------------------------------------------------------
DECLARE @FileNamevarchar(2000),
@bcpCommandvarchar(2000)
SET @FileName =REPLACE('\stladminy_drive ransfer
maffrandauthors_'+CONVERT(char(8),GETDATE(),1)+'.txt','/','-')
SET @bcpCommand ='bcp "SELECT * FROM FKIAcctReceivable.dbo.PurchaseOrder" queryout "'
SET @bcpCommand =@bcpCommand + @FileName + '" -T -c'
EXEC master..xp_cmdshell @bcpCommand
---------------------------------------------------
xp_cmdshell has been enabled and the user has sysadmin rights.
Anybody have the same problem and willing to help?
View 3 Replies
View Related
Jul 23, 2005
H friendsI have a strange problem.i am trying to connect to my sqlserver from client machine to servermachineBut i am not able to connect to the server from the client machine.The strange thing is that i am able to connect through Named Pipes butnot with TCP/IP and i get error SQL Server doesnot exit or accessdenied.Could you please help me out...Anil P
View 2 Replies
View Related
Nov 27, 2007
Hi,
I have a Visual C# WinForms app which I am accessing a SQL Server 2005 database with.
On the Server, I have allowed remote connections (TCP and named pipes) and enable SQL Browser as per instructions on MSDN. The app works fine on the development machine.
Server name is SQLEXPRESS, connecting with Windows Authentication.
Server log states that it is listening on [ 'any' 3153].
Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].
On the client (local network), when trying to open the database I get this error still:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Also on the client, I can go into the ODBC Data Source Administation, and connect to the SQL Server Database that way successfully.
What further steps can I take to allow the client to access the SQL Server?
Andrew
View 1 Replies
View Related
Apr 4, 2006
When you display a SQL Reporting Services report to the screen in the header there is a Printer Icon displayed. When we click this icon we get an error message "Unable to load client print control ".
Does anyone know what we need to load or what we need to do to resolve this so that we can print the report directly to teh printer, rather than having ot prinnt the web page, which also prints all the Web headre information
View 93 Replies
View Related
May 11, 2007
Hello,
We have a recurring problem with one of our MS SQL Servers (MS SQL Server 2005 SP 1).
The SQL Server serves as a database server for a Web application with approximately 1500 users, the server is dedicated for the DataBase server.
The scenario is that the database servers cpu peaks at 100% and stays there until restart of the SQL Server service.
The error message from the applicatoion log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 18056
The client was unable to reuse a session with SPID 94, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
SPID varies.
Anybody that knows anything why this error occurs?
Regards
John
View 25 Replies
View Related
Feb 5, 2007
Hello,
I was hoping someone had this problem and has a solution... :)
Some background info:
SQL 2005 Enterprise x64
Windows 2003 R2 x64 Enterprise (clustered)
Oracle client 10.2.0.3 (latest as of 2/2/07)
The issue I'm having is I have a link server setup within SQL 2005 connecting to a Oracle 8 database server. The Oracle client I'm using is 10.2.0.3 (latest version from Oracle). From the SQL 2005 server I'm able to query the remote oracle server through the link server I had setup if I query the table directly. If I perform a query to a view on the Oracle server I'm able to see the colum names, but not the data. This only happens when I'm using the Oracle client, if I use the MS client for Oracle it works fine OR if I use SQL Plus.
Now, you're probally asking, why not just use MS's driver... Well, I would If I could, but Microsoft hasn't provided a 64 bit driver for Oracle which I need to create the link server in SQL.
Any help would be appreciated.
View 4 Replies
View Related
May 21, 2007
Hi, I have a Active/Active SQL 2005 Cluster, and I've seen this recurring message in the Event Log.
Source: SQLBrowser
Category: None
Type: Error
User: N/A
EventID: 8
Message: The SQLBrowser service was unable to process a client request.
I don't know if it's something to worry about, since I haven't had anyone call in an issue.
I have set the default and named instances to specific ports, no dynamic ports here.
There's nothing in the instances' error logs.
View 4 Replies
View Related
Jul 11, 2007
Hi to everyone!
Here is my problem: I have SQLEXPRESS running with Windows Authentication on a "server" PC named "ASUS1", and I need to connect from a "client" PC named "Presario1", user "Mauro", connected through a peer network (I use a cross-over cable); both PCs belongs to the same workgroup named "RMT-WORK", and they can see each others shared folders without problems.
I have installed the connectivity components + Management Studio Express on Presario1, and enabled named pipes and TCP/IP protocols; then I've got SQL Browser running. I have also added the Login "Guest" on ASUS1SQLEXPRESS.
When I start Management Studio Express on Presario1 and browse for servers I can select "ASUS1" as database engine but when I try to connect I receive "Error 40: could not open a connection to SQL Server" (same result using SQLCMD); I have tried to add on ASUS1SQLEXPRESS a user "Presario1Mauro" with "CREATE LOGIN [Presario1Mauro] FROM WINDOWS" but I receive a "Windows user not found" error...
Can anyone help me?
View 6 Replies
View Related
Jun 9, 2015
We are unable to connect with Client SQL database server using VPN connection, even we are able connect with their intranet site.
We tried to connect using IP address, but no success. After that tried to ping that server with server name and IP address using command prompt, but got request time out error.
View 5 Replies
View Related
Mar 12, 2007
Only one of our users is getting this error
unable to load client print control
She was able to print fine before, any idea why this is happening.
View 1 Replies
View Related
Aug 7, 2015
I have a bcp command that works in 2008 standard edition but not in sql 2012 developer edition.
I'm using the SA account in both cases to a local sql server.
Results are attached.
set nocount on
SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
go
select @@version
go
select @@MICROSOFTVERSION
go
exec sp_configure 'xp_cmdshell'
[Code] ......
View 2 Replies
View Related
Oct 28, 2015
I unable to setup a linked server on sql server 2012. The destination server is on sql server 7.0. I can able to setup the same linked server on sql 2005 sp4 and sql 2008 r2 but unable to setup on 2012. I am getting the below error message. OLE DB provider "SQLNCLI11" for linked server "" returned message "Client unable to establish connection due to prelogin failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
OLE DB provider "SQLNCLI11" for linked server "" returned message "Client unable to establish connection".
Msg 26, Level 16, State 1, Line 0
Client unable to establish connection because an error was encountered during handshakes before login. Common causes include client attempting to connect to an unsupported version of SQL Server, server too busy to accept new connections or a resource limitation (memory or maximum allowed connections) on the server.
View 2 Replies
View Related
Oct 28, 2015
I unable to setup a linked server on sql server 2012. The destination server is on sql server 7.0. I can able to setup the same linked server on sql 2005 sp4 and sql 2008 r2 but unable to setup on 2012. I am getting the below error message. OLE DB provider "SQLNCLI11" for linked server "" returned message "Client unable to establish connection due to prelogin failure".
View 3 Replies
View Related
Apr 13, 2006
Hello,
We are running SQL2K5 and have a Web server with a family of sites all sharing an identical connection string to enable ADO connection pooling between them. Today for about 20 minutes we had several (all?) connections from one site that uses a specific DB get a connection reuse error which showed in out SQL logs:
DESCRIPTION: The client was unable to reuse a session with SPID #, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
We also have SQL Server slowdown and log in problems from other applications that seemed a symptom of this, or some third unknown cause. Note, the # means the run-time spid number was inserted. The misspelling "conection" comes right out of sys.messages (it is not our custom error):
select top 10 * from sys.messages where message_id = 18056
The immediately preceeding error in the SQL Log was always:
Message
Error: 18056, Severity: 20, State: 29.
Where Severity and State vary, but "Error: 18056" is consistent, although I can find no documentation on "Error: 18056" through Google or MSDN.
Also, the "The client was unable to reuse a session ..." error seems not to be referred to anywhere.
In our IIS logs, the matching entries are of the form:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
and
Invalid connection string attribute
My questions: Does anyone have experience with this error? We have real good history with ADO connection pooling, but can a "bad" connection be pooled, and if so can it be "flushed" or the pool "drained"?
Thank you for anything you have to offer!
View 13 Replies
View Related
Mar 21, 2007
have removed bsn contact manager and all sql related files from previous installation attempts, rebooted so should be a clean install - but still it fails
what did I miss or what am I doing wrong?
here are the logs with ref to the two items that fail
~~~
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Professional (Build 6000)
Time : Tue Mar 20 18:30:20 2007
Product : OWC11
Error : Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:Program FilesMicrosoft OfficeOFFICE111033SETUP.CHM.
--------------------------------------------------------------------------------
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.8003.0
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0012_PATRICES-XPS_OWC11_1.log
Last Action : InstallExecute
Error String : Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:Program FilesMicrosoft OfficeOFFICE111033SETUP.CHM.
Error Number : 1706
thanks for any help/light/suggestions you can share
View 2 Replies
View Related
Nov 16, 2015
We have recently upgraded our .Net web application from a windows 2003 server to a windows 2012 server. Since this happened users that are trying to print a reporting services report is getting the error "Unable to load client print control". We are using reporting services 2012, but the application is using the 8 version of the viewer. The reporting services server did not change only the application server. The code for the application did not change.
View 4 Replies
View Related
Nov 23, 2006
Hi,
I currently have SQL2005 Std, using 2 separate domain accounts for both SQL server and SQL agent. When accessing the MSDB stored packages folder from mgmt studio, I get the following error:
Client unable to establish connection.
Encryption not supported on SQL server.
I did google for this error, but have tried all suggestions, including updating the MsDtsSvr.ini.xml file with the servername. I am using a default instance.
Also, I am only able to access the MSDB folder if I set the SQL service account to the local admin account. I have also set the SQL service account to be part of the local admins group, but without any luck.
TIA.
View 1 Replies
View Related
Dec 14, 2007
Hi all,
I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en
Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link
http://channel9.msdn.com/ShowPost.aspx?PostID=142941
First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.
Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.
View 4 Replies
View Related
Dec 14, 2000
Hi,
My department has some questions about Client Access Lisences. Specifcally, they want a definition of what does and does not require a CAL,
and they want something somewhat official. I checked the MSKB, and looked on their sales website, but all I can find is the EULA, and that doesn't help
me all that much.
Does anyone else have this information?
Joe
View 2 Replies
View Related
Jan 28, 2002
I am experiencing VERY slow connectivity between client and server SQL 2000. I have checked the network activity and it is low. It also takes Enterprise manager ages to load, and then browsing tables and trees is impossible!
HELP!!
View 1 Replies
View Related
May 9, 2001
Hello everybody,
I recently made a DTS-package from importing external data in my sql2k
server.
I linked my access file to the sql server to make some reports.
Right now, my clients run the dtsrun utility through a batch file
themselves. I gave them permissions to be the dbase owner.
Now when you link from access to sql server as admin, your names are :
dbo_Tablename.
If it's another user, the names get pvanmoer_Tablename and for another user
it's cvanho_Tablename.
(Validation through NT)
So my linked tablenames aren't valid anymore in my access file. So I need
to relink them each time.
How can I avoid this problem ? I've been trying to create tables without
dbaseowner, but this doesn't seem to work.
Can anyone help me ?
Thanks,
Bjorn
View 2 Replies
View Related
May 27, 2005
Hello Everybody,
I need some help.
When we install the Database at the clients end, the client can see all
the SQL tables, views and stored procedure in the Enterprise Manager.
Is there a way via which you can restrict the client from viewing the
tables in SQL Enterprise manager?
I hope you understand my question.
I would be oblidged if my friends could help me...
Thanks
View 1 Replies
View Related
