Unable To Cast Object Of Type 'System.String' Error Help

Aug 1, 2007

Unable to cast object of type 'System.String' to type 'System.Web.UI.DataSourceSelectArguments'.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.DataSourceSelectArguments'.
 

Hi, In my pageload i have data retriving from a page and i want it to load it in the GridView. i have GridView and SqlDataSource but when the page loads i am getting the above error. i am not sure what im doing wrong here. i tried different ways. but no luck Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

If Not IsPostBack Thenfp = CType(Context.Handler, Member)

'lblEmail.Text = fp.EMM.ToString

'this labelbox for Email address is under the Name'lblEmail.Text = fp.EmailAddress.ToString

 

 Dim conn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("imacstestConnectionString").ConnectionString)

Dim cmd As SqlCommand = New SqlCommand("SELECT , [fname], [mname], [lname], [address], [city], [state], [zip], [phone] FROM [t_CustomerAcct] WHERE = @email", conn)cmd.Parameters.AddWithValue("@email", fp.EMM.ToString)

conn.Open()

SqlDataSource1.Select(cmd.ExecuteScalar())

'.ExecuteScalar()

 

conn.Close()

End If

End Sub

View 1 Replies


ADVERTISEMENT

SqlDataSource.Select Error: Unable To Cast Object Of Type 'System.Data.DataView' To Type 'System.String'.

Oct 19, 2006

I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx    Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!

View 3 Replies View Related

Unable To Cast Object Of Type 'System.String' To Type 'System.Web.UI.WebControls.Parameter'.

Jun 19, 2008

I'm getting this error on a vb.net page the needs to execute two separate stored procedures.  The first one, is the main insert, and returns the identity value for the ClientID.  The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure.  What am I doing wrong with including the identity value "ClientID" in the second stored procedure? 
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:




Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb    Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert? 
 
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub

View 2 Replies View Related

Unable To Cast Object Of Type 'System.DateTime' To Type 'System.String'.

Dec 31, 2007

 Hi,      I got this field (dateSubmitted) having a data type of DateTime but I receive this error "Unable to cast object of type 'System.DateTime' to type 'System.String'."       All value for dateSubmitted field are 12/27/2007 12:00:00 AM. cheers,imperialx 

View 3 Replies View Related

Unable To Cast Object Of Type 'System.Object' To Type 'System.Data.DataSet'.

Nov 27, 2007



hi i dont know how to do type casting.

this.Variables.ObjVariable this objVariables i have create in variable place below like this



Name:Variable datatype int32 values 0

Name: NumberofRowsdatatype int32 values 10000

Name: ObjVariable datatype Object



My code





public override void CreateNewOutputRows()

{

/*

Add rows by calling the AddRow method on the member variable named "<Output Name>Buffer".

For example, call MyOutputBuffer.AddRow() if your output was named "MyOutput".

*/

System.Data.OleDb.OleDbDataAdapter oLead = new System.Data.OleDb.OleDbDataAdapter();

//System.Data.Odbc.OdbcDataAdapter oLead = new System.Data.Odbc.OdbcDataAdapter();

//SqlDataAdapter oLead = new SqlDataAdapter();

System.Data.DataTable dt = new System.Data.DataTable();

DataSet ds = (DataSet)this.Variables.ObjVariable; // here i am getting error

ds.Tables.Add(dt);


ADODB.Record rs = new ADODB.Record();



oLead.Fill(ds, rs, "Variables");

foreach (DataRow row in dt.Rows)

{

{

Output0Buffer.AddRow();

Output0Buffer.Column = (int)row["Column"];

Output0Buffer.Column1 = row["Column1"].ToString();

Output0Buffer.Column2 = row["Column2"].ToString();

}

}


}

}

This is the error

Unable to cast object of type 'System.Object' to type 'System.Data.DataSet'.

at ScriptMain.CreateNewOutputRows()

at UserComponent.PrimeOutput(Int32 Outputs, Int32[] OutputIDs, PipelineBuffer[] Buffers)

at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)



thanks

kedaranth

View 5 Replies View Related

Unable To Cast COM Object Of Type 'System.__ComObject' To Class Type 'System.Data.SqlClient.SqlConn

May 17, 2006

Dear all,

I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.

Error:





[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)



Script Code (from Script Component):



' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components

Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper


Public Class ScriptMain
Inherits UserComponent


Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter


Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Dim valorColumna As String
Dim valorColumna10 As Double


valorColumna = Row.Column9.Substring(1, 1)

If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If

Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)

With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)

.ExecuteNonQuery()
End With


End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)

Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)

End Sub
Public Overrides Sub PreExecute()

sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)

End Sub


Public Sub New()

End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub

Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class







Thanks a lot for your help


View 13 Replies View Related

@PARAM1 : Unable To Cast Object Of Type 'System.Data.SqlTypes.SqlInt32 To Type System.IConvertable

Apr 23, 2007

I get the following message in the vs2005 querybuilder when i do a preview:



***********************************
SQL Execution Error.

Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)



Error Source: SQL Server Compact Edition ADO.NET Data Provider


Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************

The same querypreview works fine without the parameter:



SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)



Can anybody tell me why this is?
And tell me a way to get the tableadapter working?



Anne-Jan Tuinstra

View 3 Replies View Related

Unable To Cast Object Of Type 'System.DBNull' To Type 'System.Byte[]'.

Aug 13, 2007

Hi,
I have developed a custom server control for .NET Framework 2.0. The server control has a property named BinaryData of type byte[]. I marked this property to be data bindable. Now, I have varbinary(Max) type of field in my SQL Database and I have used SQLDataSource and bound this varbinary(Max) field with the property BinaryData (byte[]) of my control. It is working fine as long as the data value is not NULL. Now, In my control, I have handled the NULL value so that no Exception is thrown. Still, when I bind this property using the SQLDataSource, I get Error "Unable to cast object of type 'System.DBNull' to type 'System.Byte[]'." I am not sure if I can do anything to stop this erro within my control. If it is not possible from the control, then what is the workaround that I can do in my ASPX page in order to stop this error ?
Thanks a lot in advance.

View 10 Replies View Related

Unable To Cast Object Of Type 'System.Xml.XmlTextReaderImpl'

Jul 2, 2007

I'm getting the following error:  Unable to cast object of type 'System.Xml.XmlTextReaderImpl' to type 'System.Xml.XmlTextReader'. This works in .net 1.1 but having issues in the conversion to 2.0.
Public Function RunSPReturnXMLReader(ByVal strSP As String, ByVal ParamArray params() As SqlParameter) As System.Xml.XmlTextReader
Dim objHelperConnection As SqlConnectionobjHelperConnection = New SqlConnection(sConnect)Dim myXmlReader As System.Xml.XmlReader = objHelperCommand.ExecuteXmlReader()
RunSPReturnXMLReader = myXmlReader - GETTING ERROR HERE
End Function
 
Thanks...

View 10 Replies View Related

Open SSIS Project Error: Unable To Cast COM Object Of Type

Oct 4, 2006

When I open up my existing SSIS project, I always get this error. Does anyone know what was wrong ?



TITLE: Microsoft Visual Studio
------------------------------

Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.IObjectWithSite'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{FC4801A3-2BA9-11CF-A229-00AA003D7352}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).

View 32 Replies View Related

How To Fix Unable To Cast Object Of Type 'Microsoft.SqlServer.Management.Smo.Urn'

Jan 25, 2008

In Sql Server 2005, Sql Server Mangerment Studio 9.00.1399.00
I connected an user instance to the databases under .SQLEXPRESS(SqlServer 9.0.3042 -....)
when I right click on a table
and chose modify, or new table...
I get

TITLE: Microsoft SQL Server Management Studio
------------------------------
Unable to cast object of type 'Microsoft.SqlServer.Management.Smo.Urn' to type 'Microsoft.SqlServer.Management.Smo.Urn'. (SQLEditors)
------------------------------
BUTTONS:
OK
------------------------------

same thing for views
What can I do to fix the problem? is there a patch?



btw script .... as seem to be erro free Error free is also View dependence,

View 3 Replies View Related

Unable To Cast COM Object Of Type 'ADODB.CommandClass' To Interface Type 'ADODB._Command'

Dec 20, 2006

I have an application which runs successfully on a couple of my customer's machines but fails on a third. It seems to fail when opening the database:

Unable to cast COM object of type 'ADODB.CommandClass' to interface type 'ADODB._Command'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{B08400BD-F9D1-4D02-B856-71D5DBA123E9}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=false; Initial Catalog=lensdb;Data Source = SQL

Before I got this error I was getting another problem (sorry didn't make a copy of that error's text) that made me think that adodb.dll simply wasn't loaded/registered. I got rid of that error by copying my adodb.dll onto the third machine and running gacutil /i. There is now an entry in winntassemblies for adodb.

Just in case you think it could be an obvious registry problem: when I started getting the current error I thought that maybe the registry needed updating and I merged the following lines into onto the target machine (from my dev machine):

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"


but, no change alas.

All three machines are running Windows 2000.

Any advice would be appreciated.

Thanks in advance,

Ross

View 1 Replies View Related

SSIS Error: Unable To Cast COM Object

Oct 10, 2007

Hi,

I get the following error opening an existing (or working) ssis package on my new server.

Error loading 'TestExecutionFromScript.dtsx' : Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSContainer90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{8BDFE892-E9D8-4D23-9739-DA807BCDC2AC}' failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED))..

I found in a blog that this is caused due to a dll which is not registered ("DTS.dll")

Can anyone try to explain the exact reason for this? I am not even able to execute a package from the command prompt using the dtexec utility. I have "Microsoft SQL Server Analysis Services Designer Version 9.00.3042.00" on my server. My other machine which executed this package successfully was running "Microsoft SQL Server Analysis Services Designer Version 9.00.1399.00".

Thanks very much for any kind of help.

View 3 Replies View Related

Type Cast Error Converting From Integer To String

Oct 30, 2007

I am attempting to convert an integer value to a string using the Derived Column transformation with the following expression on the field:
(DT_STR,10,1252)prod_id

prod_id is an integer. I was able to do this before however, in the past couple of days, this has failed with the following error:
"An error occurred while attempting to perform a type cast."


To my knowledge, I have not changed anything about this particular data flow within the past couple of days. I have verified that the value is coming in as an integer.

Any help would be greatly appreciated.

View 7 Replies View Related

SQL 2012 :: Unable To Cast COM Object

Dec 31, 2014

I have already registered the Dts.dll, but it did not make any change, also I have update the visual studio to latest update 4.I have registered the dll by using CMD to the below location and entering regsvr32 dts.dll, it brought up a popup message saying the dll the has been registered.

C:Program FilesMicrosoft SQL Server100DTSBinn

But the issue remains the same, I have to click ok on the popup msg for about 20-30 times to make it go away and the dtsx package in the solution work just fine after closing the pop up.

unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSObject100'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{203E24BD-5203-4C76-AFC7-7C8545EBA1A0}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)). (Microsoft Visual Studio)

View 4 Replies View Related

Integration Services :: Unable To Cast Object

Aug 21, 2015

Trying to move data in Sybase IQ from one database (prod) to qa for a table. Using ADO.NET connection and just one Data Flow task , source , destination. Using Sybase IQ driver.

Error:[ADO NET Destination [2]] Error: An exception has occurred during data insertion, the message returned from the provider is: Unable to cast object of type 'System.Decimal' to type 'System.Char[]'.

Nether source or target table have column with data type Decimal or Char. All types I have in table are numeric (54,15) , bigint, varchar, date.  

View 5 Replies View Related

CS0266: Cannot Implicitly Convert Type 'object' To 'bool'. An Explicit Conversion Exists (are You Missing A Cast?)

Apr 20, 2008

Using OnSelected on the SqlDataSource----here is my currect code:private void On_Load(Object sender, SqlDataSourceCommandEventArgs e){if (e.Command.Parameters["@DueDate"].Value = "NULL"){e.Command.Parameters["@DueDate"].Value = "0000-00-00 00:00:00.000";}}
I am trying to change the value from  NULL(in a datetime field) to "0000-00-00 00:00:00.000" for use on the page.Any ideas, suggestions, or thoughts would be greatly appreciated!
,Gary"we truly fail, only when we quit."

View 2 Replies View Related

Cast From String 'OPEN' To Type 'Double' Is Not Valid.

Aug 12, 2007

Hi.. Please help me resolve this error "Cast from string 'OPEN' to type 'Double' is not valid.". Error here If CallStatus = 10 Then ....Code:Public Sub UpdateCallStatus()        Dim CALLID, RequestorID, CommentsFromITD, MessageFromITD, MessageToITD, CallStatus, strSQL As String        CALLID = Request.QueryString("CallID")        RequestorID = Session("USER_ID")        CommentsFromITD = lblcomments.Text        MessageFromITD = lblmessage.Text        MessageToITD = txt_desc.Text        CallStatus = Trim(Request.Form(ddl_callstatus.UniqueID))
        Dim ObjCmd As SqlCommand        Dim ObjDR As SqlDataReader
        Try            If CallStatus = 10 Then                strSQL = "UPDATE CALLS  SET STATUS_ID=" & CallStatus & " WHERE CALL_ID=  " & CALLID & ""                ObjCmd = New SqlCommand(strSQL, ObjConn)                ObjConn.Open()                ObjDR = ObjCmd.ExecuteScalar()                gbVariables.insertuserevents(CALLID, RequestorID, "Call Closed")                Response.Redirect("UserCallClosed.aspx")                ObjConn.Close()            Else                strSQL = "UPDATE CALLS  SET STATUS_ID=" & CallStatus & " WHERE CALL_ID=  " & CALLID & ""                ObjCmd = New SqlCommand(strSQL, ObjConn)                ObjConn.Open()                ObjDR = ObjCmd.ExecuteScalar()                ObjConn.Close()
                strSQL = "SELECT STATUS_LABEL  FROM STATUS WHERE STATUS_ID = " & CallStatus & ""                ObjCmd = New SqlCommand(strSQL, ObjConn)                ObjConn.Open()                ObjDR = ObjCmd.ExecuteScalar()                ObjConn.Close()
                gbVariables.insertuserevents(CALLID, RequestorID, CallStatus)                CallStatus = ""            End If        Catch ex As Exception            lblmsg.Text = ex.Message.ToString        End Try    End SubThanks...

View 1 Replies View Related

Cast COM Object Error On OleDb Destination (Access 2003)

Mar 20, 2007



Trying to do a update/insert from SQL 2005 query to Access 2003 linked table.

In the Script Transformation I get this error.

Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.OleDb.OleDbConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface.

Destinatoin Oledb connection is Native OLEDB Jet 4 to Access 2003 database.

Private sqlConn As OleDb.OleDbConnection

Private sqlCmd As OleDb.OleDbCommand

Private sqlParam As OleDb.OleDbParameter

Private connstring As String

Public Overrides Sub AcquireConnections(ByVal Transaction As Object)

connMgr = Me.Connections.ConnectionOLE

'sqlConn = CType(connMgr.AcquireConnection(Nothing), SqlConnection)

connstring = connMgr.ConnectionString

sqlConn = CType(connMgr.AcquireConnection(Nothing), OleDb.OleDbConnection)

End Sub



Any help would be appreciated.

View 3 Replies View Related

Random Error Occurred While Attempting To Perform A Type Cast, Why?

Apr 17, 2008



Hi all!

I´m having some trouble with a SSIS package that I´ve been using five months or so now.

I have a package scheduled to run every 2 minutes to load data into my SQL Server instance
from our mobile computer systems. This data comes is read as flat file sources. My package runs 24/7.

My problem is that this package randomly returns "An error occurred while attempting to perform a type cast". This message is then returned during maybe 3 or 4 executions of the package. The error then vanishes into thin air, without me doing anything what so ever, and execution continues. The very same file that previously returned the errors is now processed without any problems.

I have no clue why this is, but I get the feeling that there has to be a reason for these random errors. To me, the type cast error seems to indicate problems with the data source (the flat file), but since the same file suddenly get processed without errors I have no clue where to start looking.

Anyone having the same issue?

Regards,

Daniel

View 2 Replies View Related

Cast From String &"&" To Type 'Date' Is Not Valid

Mar 12, 2006

Hello, I am using an SQLDataReader called DrCoInfo to check if any matching records exist in a table.

My code is as such:

Line 119:DrCoInfo = comm1.ExecuteReader()
Line 120:While DrCoInfo.Read()
Line 121: If DrCoInfo("DateOfMan") <> "" Then
Line 122: BValid = True
Line 123: End If

However, it fails to work with the message :System.InvalidCastException: Cast from string "" to type 'Date' is not valid.

Any suggestions? Thanks.

View 4 Replies View Related

BC30311: Value Of Type 'System.Data.SqlClient.SqlDataReader' Cannot Be Converted To 'String'.

Jan 4, 2005

Does anyone know what the problem is?


Sub Page_Init(sender As Object, e As EventArgs)
Dim txtName As New TextBox()
Dim txtPart As New TextBox()
Dim txtEach As New TextBox()
Dim txtTotal1 As New TextBox()
Dim txtSubtotal As New TextBox()
Dim txtTax As New TextBox()
Dim txtShipping As New TextBox()
Dim txtTotal2 As New TextBox()

Dim prod_id As Integer
Dim id As Integer
id = Request.Querystring("prod_id")
txtName.Text = GetName(id).................this is the problem line

phName.Controls.Add(txtName)
phPart.Controls.Add(txtPart)
phEach.Controls.Add(txtEach)
phTotal1.Controls.Add(txtTotal1)
phSubtotal.Controls.Add(txtSubtotal)
phTax.Controls.Add(txtTax)
phShipping.Controls.Add(txtShipping)
phTotal2.Controls.Add(txtTotal2)

End Sub


I'm trying to populate dynamically rendered textbox's, how should I do that too?

View 1 Replies View Related

Unable To Create Object Error In Sp_SendSMTPMail

Jul 20, 2005

Hello,I am attempting to send emails using T-SQL (in a SQLServerAgent Job)using the stored procedure sp_SendSMTPMail. I created the stored procusing the following script that I got off a post here on google.CREATE PROCEDURE sp_SendSMTPMail (@From varchar(255),@To varchar(8000),@Subject varchar(255),@Body varchar(8000),@cc varchar(8000) = NULL,@Bcc varchar(8000) = NULL)ASDECLARE @newmail intDECLARE @result int-- Create the CDONTS.Newmail objectEXEC @result = sp_OACreate 'CDONTS.NewMail', @newmail OUTIF @result <> 0BEGINPRINT 'Error creating object'EXEC sp_displayoaerrorinfo @newmail, @resultRETURNEND-- Check the Optional PropertiesIF not @cc = NULLBEGINEXEC @result = sp_OASetProperty @newmail, 'cc', @ccIF @result <> 0BEGINPRINT 'Error setting [cc] property'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDENDIF not @Bcc = NULLBEGINEXEC @result = sp_OASetProperty @newmail, 'Bcc', @BccIF @result <> 0BEGINPRINT 'Error setting [Bcc] property'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDEND--set the non-optional propertiesEXEC @result = sp_OASetProperty @newmail, 'From', @FromEXEC @result = sp_OASetProperty @newmail, 'To', @ToEXEC @result = sp_OASetProperty @newmail, 'Subject', @SubjectEXEC @result = sp_OASetProperty @newmail, 'Body', @Body-- Send the message...EXEC @result = sp_OAMethod @newmail, 'Send'IF @result <> 0BEGINPRINT 'Error sending message'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNEND-- Destroy the object.EXEC @result = sp_OADestroy @newmailIF @result <> 0BEGINPRINT'Error destroying object'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDGO______________________________________________This worked perfectly in testing at our office but when we shipped tothe client it produced the error 'Error creating object'. We sent theclient the script to create the sp_displayoaerrorinfo proc and got thefollowing error message.Error creating object-2147221005OLE Automation Error InformationHRESULT: 0x800401f3Source: ODSOLE Extended ProcedureDescription: Invalid class stringNow this suggested to me that the for some reason we were unable toreference the CDO library, or it wasn't installed. However they haveOutlook 2000 installed with CDO installed with it. I've had had themremove and reinstall the CDO library but that hasn't helped.Other thing I though of was a permission type problem. They are usingNT authentication for there logins into SQL server and are logged onthe server as Administrator who I would assume has all requiredpermissions.Any suggestions for either determining the cause of them problems or asolution?Thanks in advance.Bob.

View 3 Replies View Related

Microsoft Visual Studio Is Unable To Load This Document: Object Reference Is Not Set To An Instance Of An Object

Apr 8, 2008

Hi Everyone,
Please help me on this issue. I'm a new SSIS User.
I've installed Sql Server 2005 Developer Edition
When I create a new SSIS Project in Business Intelligence Development Studio,
I get the following message:
"Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object".
Error loading 'package.dtsx'bject reference is not set to an instance of an object
When I try to debug the package, I get the below message:
parameter Component(System.Design) is null.
I've uninstalled and installed SS 2005 several times, yet the problem persists.
Please help.
This is the package.dtsx

<?xml version="1.0"?><DTS:Executable xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTSroperty DTS:Name="PackageFormatVersion">2</DTSroperty><DTSroperty DTS:Name="VersionComments"></DTSroperty><DTSroperty DTS:Name="CreatorName">USkothand1</DTSroperty><DTSroperty DTS:Name="CreatorComputerName">US6051KOTHAND1</DTSroperty><DTSroperty DTS:Name="CreationDate" DTSataType="7">4/8/2008 10:53:39 AM</DTSroperty><DTSroperty DTS:Name="PackageType">5</DTSroperty><DTSroperty DTS:Name="ProtectionLevel">1</DTSroperty><DTSroperty DTS:Name="MaxConcurrentExecutables">-1</DTSroperty><DTSroperty DTS:Name="PackagePriorityClass">0</DTSroperty><DTSroperty DTS:Name="VersionMajor">1</DTSroperty><DTSroperty DTS:Name="VersionMinor">0</DTSroperty><DTSroperty DTS:Name="VersionBuild">0</DTSroperty><DTSroperty DTS:Name="VersionGUID">{FBD98635-EDDE-4F58-9D53-356E8CB653FB}</DTSroperty><DTSroperty DTS:Name="EnableConfig">0</DTSroperty><DTSroperty DTS:Name="CheckpointFileName"></DTSroperty><DTSroperty DTS:Name="SaveCheckpoints">0</DTSroperty><DTSroperty DTS:Name="CheckpointUsage">0</DTSroperty><DTSroperty DTS:Name="SuppressConfigurationWarnings">0</DTSroperty><DTSroperty DTS:Name="ForceExecValue">0</DTSroperty><DTSroperty DTS:Name="ExecValue" DTSataType="3">0</DTSroperty><DTSroperty DTS:Name="ForceExecutionResult">-1</DTSroperty><DTSroperty DTS:Name="Disabled">0</DTSroperty><DTSroperty DTS:Name="FailPackageOnFailure">0</DTSroperty><DTSroperty DTS:Name="FailParentOnFailure">0</DTSroperty><DTSroperty DTS:Name="MaxErrorCount">1</DTSroperty><DTSroperty DTS:Name="ISOLevel">1048576</DTSroperty><DTSroperty DTS:Name="LocaleID">1033</DTSroperty><DTSroperty DTS:Name="TransactionOption">1</DTSroperty><DTSroperty DTS:Name="DelayValidation">0</DTSroperty>

<DTS:LoggingOptions><DTSroperty DTS:Name="LoggingMode">0</DTSroperty><DTSroperty DTS:Name="FilterKind">1</DTSroperty><DTSroperty DTS:Name="EventFilter" DTSataType="8"></DTSroperty></DTS:LoggingOptions><DTSroperty DTS:Name="ObjectName">Package</DTSroperty><DTSroperty DTS:Name="DTSID">{191D188C-EA6E-46D6-A46A-8C9F3C21C321}</DTSroperty><DTSroperty DTS:Name="Description"></DTSroperty><DTSroperty DTS:Name="CreationName">MSDTS.Package.1</DTSroperty><DTSroperty DTS:Name="DisableEventHandlers">0</DTSroperty></DTS:Executable>
Thanks
Best Regards

View 12 Replies View Related

SQL 2012 :: Unable To Open Physical File - Operating System Error 5

Nov 6, 2015

I am trying to attach a database. But I am receiving below error:

Unable to open the physical file "D:databasepc.mdf". Operating system error 5: "5(Access is denied.)".

I have added service accounts to administrator group.

I have provided full control to service account on the D drive and on the .mdf file also.

My self has full permissions on the drive and .mdf file, and I am in administrator group.

Restarted the SQL Server services.Still same error.

View 9 Replies View Related

SQL Tools :: Error - Unable To Access User Principal Information From The System

Aug 25, 2014

I am not able to launch the Kerberos Configuration Manager due to the above error.

View 4 Replies View Related

DB Engine :: Unable To Open Physical File - Operating System Error 5

Apr 16, 2008

I am trying to attach a database to SQL 2005. This database has not previously been attached. I have only just installed SQL.
 
I get the following message: Unable to open physical file "C:ArrowSQLArr@DataArrow_data.mdf" Operating system error 5: "5(error not found)" (Microsoft SQL Server: Error 5120)".
 
I have loaded SQL and the database fiel and directory with the same user account which is a local administrator on this machine. I have checked that I have read/write access to the file.
 
The machine runs Windows Vista Business. SQL has SP 2 loaded. What causes this?

View 56 Replies View Related

Operating System Error 1450 - Unable To Resize Db Physical File

Oct 24, 2007



Hi,

We have a very severe issue in our production, and this is very very ugent to fix this issue, there was a job started on server on 10th October, 2007, for backup of database of 3.2 TB, which caused this issue on 18th October, 2007.
I cancelled that job and even restarted the server, but still there is same issue on the server.

I am using this command to expand the physical file,

ALTER DATABASE [ODS] MODIFY FILE ( NAME = N'ODSFG33File1', SIZE = 307200000KB )

Error:

MODIFY FILE encountered operating system error 1450(Insufficient system resources exist to complete the requested service.) while attempting to expand the physical file.

Server:

64bit Itanium Server with 4 Processors
4TB of SAN Storage
24GB of RAM
MS Windows 2003 Enterprise Edition with SP1
MS SQL Server 2005 (9.0.3152) Enterprise Edition with SP2

Database:

3.2 TB Size of Partitioned Database with 60 File Groups
Every File Group contains One month data in its only one physical File.
Physical Files are of different size between 10GB and 300GB.

Kind Regards,
Muhammad Imran.

View 8 Replies View Related

How To Solve :Error: 0xC0047062 At CTPKPF, DataReader Source [1]: System.NullReferenceException: Object Reference Not Set To An

Apr 7, 2007

hi

i need help to solve following error in ssis package when i aun ::



Error: 0xC0047062 at CTPKPF, DataReader Source [1]: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket) Error: 0xC0047038 at CTPKPF, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DataReader Source" (1) returned error code 0x80004003. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. Error: 0xC0047021 at CTPKPF, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited. Information: 0x40043008 at CTPKPF, DTS.Pipeline: Post Execute phase is beginning. Information: 0x40043009 at CTPKPF, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at CTPKPF, DTS.Pipeline: "component "OLE DB Destination" (1993)" wrote 0 rows. Task failed: CTPKPF

View 11 Replies View Related

Stored Proc Error: Error Converting Character String To Smalldatetime Data Type

Feb 12, 2005

I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.

Error from SQL Debug:
---
Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type.
---

Error from page execution:
---
Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.

Source Error:

Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
Line 78:
Line 79: cmd.ExecuteNonQuery()
---


Below is what I currently have for my stored procedure and the pertinent code from the page itself.

Stored Procedure:
---
CREATE PROCEDURE dbo.AdminAddUser( @username varchar(100),
@password varchar(100),
@email varchar(100),
@acct_type varchar(100),
@realname varchar(100),
@billname varchar(100),
@addr1 varchar(100),
@addr2 varchar(100),
@city varchar(100),
@state varchar(100),
@country varchar(100),
@zip varchar(100),
@memo varchar(100) )
AS
BEGIN TRAN

--
-- Returns 1 if successful
-- 2 if username already exists
-- 0 if there was an error adding the user
--

SET NOCOUNT ON
DECLARE @error int, @rowcount int

--
-- Make sure that there isn't already a user with this username
--

SELECT userID
FROM users
WHERE username=@username

SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT

IF @error <> 0 OR @rowcount > 0 BEGIN
ROLLBACK TRAN
RETURN 2
END

--
-- Set expiration date
--

DECLARE @expDate AS smalldatetime

IF @acct_type = "new_1yr" BEGIN
SET @expDate = DATEADD( yyyy, 1, GETDATE() )
END

IF @acct_type = "new_life" BEGIN
SET @expDate = DATEADD( yyyy, 40, GETDATE() )
END

DECLARE @paidCopies AS decimal
SET @paidCopies = 5


--
-- Add this user to the database
--

IF @acct_type <> "new" BEGIN

INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userPaidCopies, userExpirationDate, userLastPaidDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@paidCopies, @expDate, GETDATE(), @addr1, @addr2, @city, @state, @country, @zip, @memo )

SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT

IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END

END

IF @acct_type = "new" BEGIN

INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@addr1, @addr2, @city, @state, @country, @zip, @memo )

SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT

IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END

END



COMMIT TRAN
RETURN 1
GO
---


Page Code:
---
Sub AddUser(Sender as Object, e as EventArgs)

Dim db_conn_str As String
Dim db_conn As OleDbConnection
Dim resultAs Int32
Dim cmdAs OleDbCommand


db_conn_str = "Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=xxxxx; User ID=xxxxx; PWD=xxxxx;"
db_conn = New OleDbConnection( db_conn_str )
db_conn.Open()

cmd = new OleDbCommand( "AdminAddUser", db_conn )
cmd.CommandType = CommandType.StoredProcedure

cmd.Parameters.Add( "result", OleDbType.Integer ).Direction = ParameterDirection.ReturnValue

cmd.Parameters.Add( "@username", OleDbType.VarChar, 100 ).Value = Request.Form("userName")
cmd.Parameters.Add( "@password", OleDbType.VarChar, 100 ).Value = Request.Form("userPass")
cmd.Parameters.Add( "@email", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@acct_type", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@realname", OleDbType.VarChar, 100 ).Value = Request.Form("userRealName")
cmd.Parameters.Add( "@billname", OleDbType.VarChar, 100 ).Value = Request.Form("userBname")
cmd.Parameters.Add( "@addr1", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr1")
cmd.Parameters.Add( "@addr2", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr2")
cmd.Parameters.Add( "@city", OleDbType.VarChar, 100 ).Value = Request.Form("userCity")
cmd.Parameters.Add( "@state", OleDbType.VarChar, 100 ).Value = Request.Form("userState")
cmd.Parameters.Add( "@country", OleDbType.VarChar, 100 ).Value = Request.Form("userCountry")
cmd.Parameters.Add( "@memo", OleDbType.VarChar, 100 ).Value = Request.Form("userMemo")
cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")

cmd.ExecuteNonQuery()

(...)

---

View 1 Replies View Related

Why Am I Getting An Error Runtime Error Conversion String Type Pr_h_reqby To Int

Jan 17, 2007

here is my code the falue of pr_h_reqby is "Test" 
Dim strconn As New SqlConnection(connstring)
Dim myReqdata As New DataSet
Dim mycommand As SqlDataAdapter
Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & ""
mycommand = New SqlDataAdapter(sqlstr, strconn)
mycommand.Fill(myReqdata, "mydata")
If myReqdata.Tables(0).Rows.Count > 0 Then
'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString
lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString()
lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString()
lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString()
lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString()
lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString()
txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString()
End If

View 1 Replies View Related

Error 30311: Value Of Type 'System.DBNull' Cannot Be Converted To 'Date'

Apr 24, 2007

I'm creating an ISP for extractig data from a text file and put it in a database.

One of the fields in my textfile contains the value '0' or a date. If it's '0' it should be converted to the Null Value. The column in which it has to be saved is of type smalldatetime.



This is the code of my script where I want to check the value of the field in my textfile and convert it to a date or to Null.



Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

If Row.cdDateIn = "" Or Row.cdDateIn= "0" Then

Row.cdDateInCorr = CDate(DBNull.Value)

ElseIf Row.cdDateIn_IsNull Then

Row.cdDateInCorr = CDate(DBNull.Value)

Else

Row.cdDateInCorr = CDate(Row.cdDateIn)

End If

End Sub



The error that I get is:

Validation error. Extract FinCD: Conversion of cdDateIn [753]: Eroor 30311: Value of type 'System.DBNull' cannot ben converted to 'Date'.



How do I resolve this problem ?

View 8 Replies View Related

Object Reference Not Set To An Instance Of An Object As System.NullReferenceException

Jan 2, 2008

Hi,

I am using a stored procedure and places the value into a dataset.
But it prompts me an error.

And here is my code:

Dim cmd As New SqlCommand("testProc", mySqlConnection)

cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@PrdCode", SqlDbType.VarChar, 50).Value = strBonPrdCode
cmd.Parameters.Add("@keyWord", SqlDbType.VarChar, 250).Value = srchKeyword
cmd.Parameters.Add("@keyWord_Count", SqlDbType.Int).Value = Keyword_count

Dim da As New SqlDataAdapter(cmd)
Dim ds As New DataSet

da.Fill(ds, "Results")

recCount = ds.Tables("Results").Rows.Count


Can you give me a solution to solve this problem. Thanking you in advance.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved