Unable To Complete Login Process Due To Delay In Login Response
Jan 16, 2006
I receive this error message occasionally in my ETL - usually when trying to pull data from our source system:
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to complete login process due to delay in login response". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: Timeout error [258]. ".
There is a setting in the connections manager, under the ALL tab, Initialization, Connect Timeout. It is set to zero, which would be the default. It appears (by looking at the timestamps in my error log) that the default is 15 seconds. If I change this to a higher value (60 seconds or so) should this fix the error?
Thanks,
Evan Black
View 1 Replies
ADVERTISEMENT
Oct 15, 2007
I am getting an error in Replication between SQL Server 2005 and SQL Express when "Connecting to Subscriber". Detailed error message is given below. Do we need to increase the logintimeout for "Connecting to Subscriber". How can we increase it?
Message
2007-10-15 06:37:58.398 Startup Delay: 8503 (msecs)
2007-10-15 06:38:06.898 Connecting to Distributor 'ACR-MANGO'
2007-10-15 06:38:06.976 Initializing
2007-10-15 06:38:06.976 Parameter values obtained from agent profile:
-bcpbatchsize 2147473647
-commitbatchsize 100
-commitbatchthreshold 1000
-historyverboselevel 1
-keepalivemessageinterval 300
-logintimeout 15
-maxbcpthreads 1
-maxdeliveredtransactions 0
-pollinginterval 5000
-querytimeout 1800
-skiperrors
-transactionsperhistory 100
2007-10-15 06:38:06.991 Connecting to Subscriber 'ACR-ANJILISQLEXPRESS'
2007-10-15 06:38:46.133 Agent message code 20084. The process could not connect to Subscriber 'ACR-ANJILISQLEXPRESS'.
2007-10-15 06:38:46.148 Category:NULL
Source: Microsoft SQL Native Client
Number: 08001
Message: Unable to complete login process due to delay in opening server connection
2007-10-15 06:38:46.148 The agent failed with a 'Retry' status. Try to run the agent at a later time.
View 1 Replies
View Related
Apr 16, 2008
I got this message from sql
"Server was unable to process request. ---> A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) "
Does anyone know what happen?
Thanks
View 8 Replies
View Related
Jan 14, 2007
I am having an issue with the login time from my program to authenticate through the SQLExpress. I have the latest version and I am using for code this :
Dim cnn As New SqlConnection(Globals.m_con_str)
Dim cmd As New SqlCommand("star_login", cnn)
cnn.Open()
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.AddWithValue("@UName", txtUN.Text)
cmd.Parameters.AddWithValue("@PWord", txtPW.Text)
Dim dr As SqlDataReader
dr = cmd.ExecuteReader()
If dr.HasRows Then
While dr.Read()
..........execution of successful login
end while
end if
If cnn.State = ConnectionState.Open Then
cnn.Close()
End If
My issue is this. Once you have done this once speed is good from there on out. After you log out of the program, the login is good. I have tried reindexing because I though this might be the issue but it did nothing.
Any help would be greatly appriciated
View 1 Replies
View Related
Oct 27, 2004
Hi,
Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()
Source File: C:finalyearproject2sample.aspx Line: 15
Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
View 3 Replies
View Related
Jul 27, 2005
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View 9 Replies
View Related
Dec 19, 2003
I am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
View 5 Replies
View Related
Mar 18, 2007
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
View 6 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Aug 22, 2006
Hi there,
I am novice to SQL, I have a software which uses SQL as backend. The software is made in such a way that during its installation it runs a stored procedure which deletes all users except SA. Now when I try to login to SQL either via Enterprise Manager or via query analyser it asks for password. When I put the password it gives error
"Unable to connect to server. msg:18456, level 16, state 1[microsoft][odbc sql server driver][sql server] login failed for user SA. Someone told me that it is unable to connect to server. But the main thing is that I dont have any client I have only server. What could be the possible reason.
1)Is there anyway of creating a user in SQL in such a situation when there is only one user SA and it is unable to log in SQL server.
2)Or is there anyway of removing SA Password.
3)Or is there anyway (in SQL SERVER) of stopping a particular procedure from getting executed while software installation.
Thanking you and waiting for some kind replies.
Regards,
Mystical
View 13 Replies
View Related
Apr 9, 2008
I am new to this, so, I will be greatful to anyone who can clarify the following:
qn 1:
In login properties under Logins of Security, what does creating mapping to the different databases mean ?
For a given login, I notice that I can login / execute DDL statements alike for the databases which are checked and also for the ones that are not checked.
Then, what does
Security -> Logins - > Login Properties -> User mapping -> Users mapped to this login -> checking the database - accomplish?
qn 2:
For a perticular login, say 'Bob' which has server admin rights, I wish to include two more databases. For this I 'checked' the databases, which I wish to include, in the
Security -> Logins - > Login Properties -> User mapping -> Users mapped to this login
When I clicked 'OK', I get the following error and the two databases are left unchecked.
User, group, or role 'SQL1AGENT' already exists in the current database. (.Net SqlClient Data Provider)
How can I include the databases ?
View 5 Replies
View Related
Jan 28, 2004
Hi
I am running into a problem loggin into SQLsrver 7.0 using 'sa' account but works fine admin account(NT acct)
I have installed sqlsrvr 7.0 on win2k - server standard edition. Installed SQLserver using NT domain account. I have created a username 'sa' with admin previleges. When I try to login with sa, login fails in the enterprise manager. ?
I tried to re-install the server7.0 using local account, again unable to login with 'sa' account in the enterprise manager
Appreciate if you could shed some lights on this issue
View 1 Replies
View Related
Jul 18, 2007
Hi. We are using SQL Server 2005 64-bit on Windows Server 2003 R2 x64Enterprise Edition. I have a really weird problem where I have peopleout there who are placed in the db_owner, db_accessadmin, anddb_securityadmin roles in their database, and yet they are unable toadd new users to their databases, despite the fact that logins existfor these users on the server. The reason is that when attempting toadd a new user in Management Studio, upon using the "Browse" option tolook at the logins, the complete list is not presented to them. Infact, they only see a couple of logins or so (the server has hundredsof logins). Also, if they try to type in the login name directly,they get a "permission denied" error message. Since they cannot addusers to their databases, they have to call me and have me do it forthem.I created a test, non-privileged, SQL-authenticated login to testthings for my own sake, and when logged in under the test account, Isaw the same behavior. I had db_owner role for a single testdatabase, and when I went to add users, the only server logins thatwere displayed were my own (the test login in this case) and that ofsa. Further, when I queried the master.sys.syslogins view, I saw thesame thing, it only came back with the rows for myself and sa.It appears that this is clearly a security problem, but I'm not sureat what level to look. We never had this problem with SQL Server 2000or earlier. Does anyone have any idea what I can do to allow mydb_owners to see all the server logins, and therefore be able to addusers to their databases as they see fit? I really do NOT want toassign them to server-level security roles, for obvious reasons.Thanks,SkyGringo
View 1 Replies
View Related
Oct 12, 2007
Using SQL Server 2005 under XP Professional. I am attempting to log into the Server Management Studio as "UserX". I had previously been using Server Management while logged in as admin.
I now get this error message when attempting to connect to the database server:
**********************************************************************TITLE: Connect to Server------------------------------Cannot connect to [**NAME OF SERVER**].------------------------------ADDITIONAL INFORMATION:Login failed for user '[**NAME OF SERVER**].UserX. (Microsoft SQL Server, Error: 18456)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476------------------------------BUTTONS:OK------------------------------
*******************************
Microsoft help doesn't have a specific help for that particular error message. Any hints as to what is going wrong?
View 4 Replies
View Related
Jul 25, 2007
I have a SQL 2k5 ent. 64 bit on Windows 2003 Ent x64 edition.
The sql server was running fine under localsystem account. Recently I changed the service account to a local user (part of users group in windows) and implemented permissions according to KB article 283811. (have imlpemented the same on many other sql servers without issue).
However, the SQL services are not starting up and I am seeing the following errors in the errorlog.
===================
2007-07-25 12:36:55.90 spid11s Server name is 'HBCARPROD'. This is an informational message only. No user action is required.
2007-07-25 12:36:55.90 spid13s Starting up database 'model'.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x51.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x1.
2007-07-25 12:36:55.90 Server Error: 17826, Severity: 18, State: 3.
2007-07-25 12:36:55.90 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-25 12:36:55.90 Server Error: 17120, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
====================================
I have gone through the http://blogs.msdn.com/sql_protocols but everything mentioned here seems to be there. I understand this is some permission issue. Just not able to find it out. Can anybody help?
View 5 Replies
View Related
Jul 4, 2007
My system config is VISTA Ultimate, Visual Studio 2005 SP1, SQL SEVER 2005 SP2. Using 2005 SQL Server Management Studio I am unable to create a servername/aspnet login account.
I right click logins and get the new login form; key ASPNET Login Name; select Windows Authentication; click search; I get the Select User or Group form; under object type I select all three; location I select my server name; if I enter SERVERNAME/ASPNET and click Check Names I get an error; if I click Advanced and Find Now; ASPNET is not listed in Name(RDN) list.
I tried aspnet_sql.exe -E -A all; that did not work.
Where can I find information on creating an ASPNET Login after experiencing the above problems?
View 2 Replies
View Related
Jun 15, 2007
I keep getting this following error when trying to set-up an updateable subscription on SQL 2005 (latest service packs). Server is set for mixed mode auth.
At the final stage of the new subscription wizard I get:
Unable to set the Publisher login for the updatable subscription. You may have to set this up directly on the Subscriber machine using sp_link_publication. (New Subscription Wizard)
The user is not associated with a trusted SQL Server connection
Login failed for user ''. The user is not associated with a trusted SQL Server connection
Error Number: 18456, Severity: 14, State: 1,Line Number: 1
Can anyone recommend a possible way of debugging this? Is it some issue with RPC security?
View 1 Replies
View Related
Aug 20, 2007
Hi
I am unable to drop the above login. The error is Error:15141 The server principal owns an event notification and cannot be dropped.
I have looked in the table sys.server_event_notifications and there are rows returned that have a server_principal_id of the user I am trying to drop. No events have been created on this server, so I am assuming these notifications are either created by default or are somehow related to Database Mail?
All the event notifications belong to service name "SQL/Notifications/ProcessWMIEventProviderNotification/v1.0" and begin with SQLWEP (i.e. SQLWEP_RECHECK_SUBSCRIPTIONS, SQLWEP_B415ADB8_A604_4057_976F_600002FA5AF6). How can I find out what these are for and how they were created?
What purpose do these event notifications have? Is there some syntax to change the owner of these event notifications so I can successfully drop the login? If the only way is to directly update the system view, is this safe and what repercussions could this have?
Thanks
Martin
View 4 Replies
View Related
Mar 6, 2007
Hello All,
Suddenly, the sql server is down, in the log file, C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG, I found the record as follows,
2007-03-05 15:40:31.59 Logon Error: 17189, Severity: 16, State: 1.
2007-03-05 15:40:31.59 Logon SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 172.21.123.48]
What else I can do to further investigate?
Thanks
Spencer
View 11 Replies
View Related
Mar 15, 2007
I have just installed MS SQL Server 2005 Express edition along with the SSMSE. I am using windows authentication. When I open SSMSE it connects me to a 'local instance' of the server. From there I right click on Database and select to add a new Database and I get the error above. I think I only need to allow local connections to the engine but I have tried allowing remote conections with all varations of named pipes and TCP/IP. I am running on Windows XP SP2 (home).
View 1 Replies
View Related
Apr 18, 2008
Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated
Thanks
David
View 2 Replies
View Related
Feb 29, 2008
Hi All
I am getting below error while
Error string: Cannot open database requested in login 'XXXXXXXXXXX'. Login fails.
what is possible casue for above problem.
View 5 Replies
View Related
Oct 14, 2007
Hi,
I have a script component. What it does, it queries the a table using a connectionstring assigned to it in the Connection Managers Editor (which is an ado.net adapter). this works fine when i'm using a windows login in the ado.net connection manager. But when i changed my connection to use SQL server login, I encounter this error:
OnError,,,Add new records to Dim_T_Status (Case),,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
OnError,,,LOAD AND UPDATE OCEAN Dimension Tables,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
OnError,,,LoadOCEANDimensions,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
How to go about this?
cherriesh
View 3 Replies
View Related
May 14, 2008
Cannot open database "QuoteSystem" requested by the login. The login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
Last time I recieved this error I had to add ASPNet, NTAuthority, and myWebSiteUsers USERS under the database properties-->permissions setting for the specific database I am trying to access with the website but this database(QuoteSystem) does not lists any of these objects so I can add them. Does anybody know what I have to do to fix this?
I am using SQL Server 2005.
View 7 Replies
View Related
Aug 10, 2005
Please, can anyone tell me why I am getting the undermentioned error message when I develop my application as an IIS Site in Visual Web Developer 2005 Express ? I have already developed and successfully tested it as a 'FileSystem Web Site' .I am using SQLSErver Express 2005 edition and have which I have installed along with the Northwind database as per the download instructions. My IIS software is version 5.1 which I have checked and it is configured to allow Integrated Windows Authentication. the relevant code is (1) web.config file connection strings
<connectionStrings>
<add name="NorthwindConnectionString"
connectionString="Data Source=.sqlexpress;Initial Catalog=Northwind;Integrated Security=True"
providerName="System.Data.SqlClient"/>
</connectionStrings>(2) the grid view control and sqldatasource
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="CategoryID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="CategoryID" HeaderText="CategoryID" InsertVisible="False"
ReadOnly="True" SortExpression="CategoryID" />
<asp:BoundField DataField="CategoryName" HeaderText="CategoryName" SortExpression="CategoryName" />
<asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NorthwindConnectionString %>"
SelectCommand="SELECT [CategoryID], [CategoryName], [Description] FROM [Categories]">
</asp:SqlDataSource>This is the full error message and details:
Server Error in '/sqlservertest' Application.
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'JERRY-3C9615BAAASPNET'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684883
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1751
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +32
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601
System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1837
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +129
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1787
Version Information: Microsoft .NET Framework Version:2.0.50215.312; ASP.NET Version:2.0.50215.312
View 1 Replies
View Related
Sep 23, 2015
All the logins with sysadmin role are locked out in one of the SQL server. Also in that instance Logon trigger is implemented which allows only certain users with Windows Authentication to logon.
This server is converted into single user mode by using command prompt. Now we are attempting to connect to SQLServer using command sqlcmd -S FTCPU3239 (since we do not have any other login) and create a new login with sysadmin role but are refused due to logon trigger. it says Login failed for login 'DomainNameUserName' due to trigger execution.
View 9 Replies
View Related
Jun 5, 2015
I have a server that has 20 databases . I have tested with few users with different level of access and all of them were able to connect to the server and also see, select, update , delete from a particular database which is kind of weird because they do not have a user login associated or mapped to that database. I checked and no user is part of any group in AD that would give them permission to connect . I need a query that would find the permission path of a user. I already queried with xp_logininfo but I am not getting any thing.
View 9 Replies
View Related
Sep 20, 2007
Hi all,
Iam getting this error
System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'.
when trying to open the page....
http://localhost:1807/projectname/WebFormName.aspx
as
http://localhost/projectname/WebFormName.aspx
Couldnt figure out the solution.Please help
Soujanya
View 2 Replies
View Related
May 9, 2008
Hi,
I just installed Visual web developper 2008 express with all options including SQL srvr express 2005!
This is from default iso image on the official website.
I create my first project and when I want to do ASP.NET configuration from web site menu, i got this error:
"Cannot open database "aspnetdb" requested by the login. The login failed."
I am just trying to learn here so i even did not create any dB or something, it is 1st time I run configuration to add security roles and users for testing!
I also un-installed all and re-installed, still the same...
pleas help and give me details as i am new.
kind regards,Golgot
View 12 Replies
View Related
Aug 12, 2015
We have see login failures for windows accounts. Below is the error message.
Description: In our env most logins are windows accounts. Initially we thought it is an UAC issue and we tried to launch the SSMS using "Run as Administrator". However, we are seeing login failures.
Enviroment:
Microsoft SQL Server 2014 - 12.0.2402.0 (X64)
RTM Enterprise Edition (HyperVisor)
Error Message in Error Log :
2015-08-10 22:36:45.290 Logon Error: 18456, Severity: 14, State: 11.
2015-08-10 22:36:45.290 Logon Login failed for user 'domainloginname'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: 10.xxx.xxx.xxx]
[code]....
We tried dropping this account and re-creating the windows account with same permissions but still result is same. It throws same error message. Login failure message !!!
View 9 Replies
View Related
Oct 28, 2015
I unable to setup a linked server on sql server 2012. The destination server is on sql server 7.0. I can able to setup the same linked server on sql 2005 sp4 and sql 2008 r2 but unable to setup on 2012. I am getting the below error message. OLE DB provider "SQLNCLI11" for linked server "" returned message "Client unable to establish connection due to prelogin failure".
View 3 Replies
View Related
Jan 7, 2008
Im running sql server 2005 and trying to connect from dreamweaver. What is causing this problem?
View 2 Replies
View Related
Mar 27, 2008
Error!!! 1>Cannot open database "intranet" requested by the login. The login
failed.Login failed for user 'RAGHAVEN-71AF9BASPNET'. Error!!! 2>
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) These both errors r coming simultaneously when start to debug only when i tried to retrive data from database ,
from past two days not able to work on database,plz
help me in solving this ,i tried everything what i know and even on
experts advice from recommended websites, forums and on google search..
View 4 Replies
View Related
