Unable To Completely Uninstall Advanced SQL Server- Report Server
Jul 5, 2006
1) I uninstalled Advanced SQL with Report Server to install 2005 SQL Developers Editions.
2) For some reason I am unable to completely uninstall Express Report Server.
3) Configuration Manager is still showing SQL Exp Report Server, even though I uninstalled Advanced Server.
4)I tried to remove though A/R programs (using my 2005 DE) - I see it listed but I receive the following error:The setup failed to read IISmime maptable the error code is -2147024893.
5) When I try to use 2005 Report Service Config Manager, I receive the following error: An unknown error in WMI Provider Error code 80040219 wmi provider.
So I am unable to setup my 2005 SQL DE Report Server.
Any ideas on uninstalling Express Report Server...This might be part of my problem.
Thanks
View 4 Replies
ADVERTISEMENT
Oct 9, 2007
i need help for completely removing sql server 2005 from my computer,in order to reinstall it again.
please help me
View 3 Replies
View Related
May 24, 2008
Hello Win XP Pro, SP3 ,.Net 1.1,2.0,3.5, ASP.Net 2.0.
I made the mistake of trying to install SQL Server 2005 Express Edition with Advanced Services as a requirement to install dashCommerce. That was a big mistake. It never installed and it screwed up my current install of SQL Server 2005 Express Edition.
I have been trying for two days now to get my SQL Server 2005 Express Edition back to normal. I can't run and test my programs in VS2005 that use SQL anymore and it's keeping me from getting my work done.
I tried uninstalling everything SQL using Add Remove Programs. Deleted all temp, SQL and unneeded files. Ran defrag. Restarted my computer. I did all that three times and still am unable to install SQL Server 2005 Express Edition.
On the existing components screen, i get the message "The following components that you chose to install are already installed on the machine. To view a report of available options and alternatives click on details."
It won't allow me to check any options and when i click next, it gives the error "None of the selected features can be installed or upgraded. Setup cannot proceed since no effective change is being made to the machine. To continue, click Back and then select features to install. To exit SQL Server Setup, click Cancel"
All i can do is cancel out of it.
Any help from anybody to figure out why i can't install SQL Express again would be gratefully appreciated.
This problem is keeping me from doing my work, it's frustrating. Is there a way to totally clean my machine of any SQL so i can get back to doing my job?
Thanks,
Tony
View 6 Replies
View Related
Jul 15, 2005
When I try to un install SQL Server Express (VS 2005 Beta 2), which is not functional, I get an error message:
View 5 Replies
View Related
Aug 4, 2007
I have just migrated from XP Professional to Windows Vista Home Premium using Laplink€™s PCMover. PCMover gives no choice but moving everything to the new PC. I tried to uninstall everything related to SQL 2005, but whenever I try to install SQL 2005 Standard€™s database engine or analysis service, I get an error saying there is already an instance.
I tried the following command:
"%ProgramFiles%Microsoft SQL Server90Setup BootstrapARPWrapper.exe /Remove
I also tried:
start /wait msiexec /x {GUID} /l*v c:sql_uninstall.log
Is there anyway to completely uninstall everything of SQL 2005 in my situation?
Thanks in advance!
View 1 Replies
View Related
Jul 9, 2007
Hi,
I have installed a copy of the SQL Server 2005 Developer Edition a few months ago. Two weeks I tried to apply SP2 and I got an error, and I thought a clean install would solve the problem. So, I went ahead to do the uninstall but I am not able to get pass MsDtsSrvr.exe as shown in the log below,
07/09/07 09:36:47 DDSet_Status: LANGID: 1033
07/09/07 09:36:47 DDSet_Entry: BeginTransaction started
07/09/07 09:36:47 DDSet_Status: LANGID: 1033
07/09/07 09:36:47 DDSet_Entry: CMsHelpObject constructor
07/09/07 09:36:47 DDSet_Status: LANGID: 1033
07/09/07 09:36:47 DDSet_Entry: CHelpCrypto constructor
07/09/07 09:36:47 DDSet_Exit: CHelpCrypto destructor
07/09/07 09:36:47 DDSet_Status: BeginTransaction()->IHxRegisterSession::CreateTransaction() returned 0.
07/09/07 09:36:47 DDSet_Status: BeginTransaction()->PostponeTransaction returned 0.
07/09/07 09:36:47 DDSet_Status: BeginTransaction()->Registration session {E0A41F96-7231-4AE8-A654-EEB34F935462} was successfully created.
07/09/07 09:36:47 DDSet_Exit: CMsHelpObject destructor
MSI (s) (D0:A8) [09:36:47:609]: Executing op: ActionStart(Name=Undo_NativeImage.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing Native Images,Template=Assembly: [1])
07/09/07 09:36:47 DDSet_Exit: BeginTransaction ended
MSI (s) (D0:A8) [09:36:47:609]: Executing op: CustomActionSchedule(Action=Undo_NativeImage.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1089,Source=BinaryData,Target=Undo_NativeImage,CustomActionData=000Removing Native Images0C:Program FilesMicrosoft SQL Server90DTSBinnMsDtsSrvr.exetrueC:Program FilesMicrosoft SQL Server90DTSBinnMicrosoft.SqlServer.DtsServer.Interop.dlltrue)
MSI (s) (D0:0C) [09:36:47:641]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI26E0.tmp, Entrypoint: Undo_NativeImage
<Func Name='LaunchFunction'>
Function=Undo_NativeImage
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Undo_NativeImage
PerfTime Start: Undo_NativeImage : Mon Jul 09 09:36:47 2007
<Func Name='Undo_NativeImage'>
Executing External Command: ngen.exe uninstall "C:Program FilesMicrosoft SQL Server90DTSBinnMsDtsSrvr.exe" /verbose
Hope someone could tell me what could have caused this problem.
Thanks!
KC
KC
View 2 Replies
View Related
Sep 16, 2005
I get an error message when trying to uninstall the SQL Server Express 2005 Tools. It reports,
View 7 Replies
View Related
May 4, 2007
I have Vista Home premium installed on my system. I installed SQL server 2005 express SP2. When I am trying to attach Advetureworks database by using following script, i get the following error.I am logged in as administrator.What kind of permission i have to set so that i can install the database.Any help will be appreciated.Script is :
EXEC sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorksDW_Data.mdf',
@filename2 = N'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorksDW_log.ldf' ;
Error is :
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorksDW_Data.mdf". Operating system error 5: "5(Access is denied.)".
Regards
View 1 Replies
View Related
May 30, 2006
I'm having a world of trouble with the Reporting Services Server. The install went fine. I went in to configure the Report Server and when creating the Report Server and the Report Manager virtual directories I get the following error: "The virtual directory could not be created. The previously set virtual directory will still be used." The problem with this is that I have not previously set a virtual directory. When clicking on the link I get the additional error information: "System.IO.FileNotFoundException:
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.CreateVirtualDirectory(String virtualDirectory, String path)"
When I check IIS the directories were created but the Reporting Services Configuration Manager does not see them unless I attempt to recreate them again without deleting them from IIS.
Anyone have any ideas as to this disconnect?
Thanks in advance!
View 11 Replies
View Related
Oct 14, 2007
How do you uninstall SQL 2k5 report service/server? Thanks.
View 1 Replies
View Related
Mar 27, 2007
When I browse to http://localhost/Reports/Pages/Folder.aspx I am getting "Unable to communicate with report server. Please verify that the report server is operational". The http://localhost/ReportServer runs fine in the browser. Also the config files have the correct urls. I don't have any other service like Sharepoint installed on the machine
Any ideas?
Thanks
View 1 Replies
View Related
May 21, 2007
Hi!
I have the report server in Share Point integrated mode.
When I Deploy a report from a VS Report Server project by running
Visual Studio on the machine where reporting servicers is running, everything works fine.
But if I try the same thing on any other machine on the network, I get the following message:
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://test/.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml' ( and so on....)
Do I need to install sp2 on the machine I'm trying to deploy from?
//C
View 6 Replies
View Related
Mar 28, 2008
I get a Report server login pop up Is there a default login and password for a default install of the report server? I am trying to deploy my report from my computer to our server. I can upload from my computer but can not deploy to the server.
View 3 Replies
View Related
Oct 4, 2006
Hi Guys,
After installing SQL Server 2005 Reporting Services, I got the following errors:
1. When I tried to open http://localhost/reports/ , I got the following error message
The report server is not responding. Verify that the report server is running and can be accessed from this computer.
2. When I tried to open http://localhost/reportserver/ , I got the following error message
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config' is denied.
Is there any clue for this technical problem?
Immediate response is appreciated.
--Amde
View 7 Replies
View Related
Aug 11, 2007
I have unable to deploy Sql Server Report as I am getting an error while deployment "A connectin could not be made to the report server http://localhost/reportServer" where as i have created virtual directory for repotServer in IIS . Can anyone plz help me out to resolve this problem ?
View 8 Replies
View Related
Feb 25, 2008
I am trying to upgrade SQL Server Express 2005 Report Server to SQL 2005 Standard and it fails with the following error:
SQL Server Setup did not have the administrator permissions required to copy a file: C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting ServicesReportServer
ssrvpolicy.config. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
After I click OK on the message, this whole path where the upgrade is bieng installed dissapears C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting Services. The error is a bit missleading because the file that it is trying to copy rssrvpolicy.config does appear in that upgrade folder so I am not sure why it would try to copy a file that has already been copied.
I was able to upgrade the Database Engine instance fine but can't upgrade Reporting Services due to that error. I have verified that the account that ran the setup had the administrator permissions. Your prompt reply to my question would be greatly appreciatted.
View 4 Replies
View Related
May 23, 2005
I installed sql2ksp3 from the CD I received in my ASP.net book. The installation went fine and then I went to the DOS prompt and did the setup SAPWD and it ran. I restarted my computer and opened ASP Matrix and went to the Data tab and proceed to connect to the server. It gave me an error message it couldn't connect. So I uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went ahead and installed the sql2ksp3 from the CD again and then went to DOS to do the setup. It ran through the setup until the very end, saying it couldn't setup the server. I have tried it several times and it always stops around 11 seconds. I have tried to install the download from microsoft instead the CD and that didn't work also. So at this point I am stuck. PLEASE HELP!
View 7 Replies
View Related
Oct 16, 2006
Hello, I have installed Enterprise edition. I used Client Network Utility to create a server. I went into Enterprise manager and tried to register this server I created and I got the following error:
Specified SQL Server not found
What should I do?
View 20 Replies
View Related
Oct 11, 2005
Hi,
I am using SQL server 2000, Crystal Reports 8.5. I dont see any problem with accessing thro' VB Coding(ADODB).
Crystal Report connection thro ODBC also working fine.
But when i try to connect to database thro "More data sources" -> SQL server , i was thrown out with an error "Unable to connect to SQL server servernam"
I have uninstalled & Reinstalled both SQL server and Crystal Report. Still not working.
I have been struggling with this problem for quite a long time.
Can any one give me the solution for this ??
Regards
SRagghu
View 1 Replies
View Related
Mar 14, 2008
hi,
I created ReportServer by reporting services configuration and i gave the local and remote permissions using surface
area cofiguration using tcp/ip only. But when i browse the reportserver i got the below mentioned error.
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable)
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 5 Replies
View Related
Jan 25, 2007
I have VS 2005 and SQL 2005 Developer ed (OS Vista) installed on my pc. When I uninstall SQL 2005, I encounter an error for SQL Reporting (someting to do with unable to read some file). Since then I am unable to reinstall SQL Reporting or uninstall SQL Reporting. I removed all the files from the directory but still I have not been able to do....Please advice...
Thanks
Malik
View 1 Replies
View Related
Oct 9, 2007
I need help for completely removing sql server 2005 from my computer.
I have tried unintalling it through Add/Remove programs,but when i try to reinstall it this message appears :
"Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online."
I think that there is something that is not completely removed from the first installation.
View 15 Replies
View Related
Jan 14, 2008
Hello Everyone,
I have a Report Server setup on my laptop (XP Pro SP2). I have developed a report which I would like to view from a Windows Forms Application (VB.NET) using a ReportViewer. When I try it from the local machine it works correctly, but if I try to connect and preview the same report from my other PC (Vista Home Premium) I am getting the "Unable to connect to the remote server. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because the connected host failed to respond." error.
I have setup the Processing mode to Remote and correctly setup the ReportPath and ReportServerUrl using:
With rptRetEmp
.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Remote
.ServerReport.ReportServerUrl = New Uri("http://192.168.1.2/CPMReports")
.ServerReport.ReportPath = "/CPM_Reports/Test"
.ServerReport.Refresh()
.RefreshReport()
End With
Where CPMReports is the Report Server virtual directory and CPM_Reports is the folder where the report Test resides.
I do not know if this has anything to do with the fact that Vista Home does not have Report Services enabled or it is just a permissions problem. I have red several posts that describe similiar problems, but I could not find a solution.
Thank you for your help.
Daniel D.
View 1 Replies
View Related
Oct 14, 2007
Hi all,
I have been using the reportviewer control to display my ssrs reports. However, i'm facing issues in displaying Server reports in the control. The following error show up whenevr i click on View Report.
Execution 'aaxe3ke5k34l5355qbup0rvo' cannot be found
Please help if anyone has come across something similar
View 1 Replies
View Related
Jan 20, 2007
I cannot use, remove, or reinstall Microsoft SQL Server 2005. Although Microsoft SQL Server 2005 and Microsoft SQL Server Setup Support Files appear in ControlPanel-ARP, when I attempt to remove Microsoft SQL Server 2005, the workstation component remains. If I try to download and reinstall Microsoft SQL Server Express from the Microsoft website, the download does not install completely as described below.
My current situation is much better than the previous incompatibility or configuration problems I had been experiencing between Microsoft Office Small Buisness Accounting 2006, Microsoft Office Outlook 2003, Outlook Business Contact Manager, Microsoft SQL Server 2005 (express edition installed in conjunction with Visual Basic 2005 express), and Microsoft SQL Server Desktop Engine (installed in conjunction with Small Business Accounting 2006). The problems and error messages previously included: 1) A consistent bootup error (Net service configuration error...The specified service does not exist as an installed service); 2) The inability of Visual Basic to connect to an instance of SQL server (An error has occurred while establishing a connection to the server...); 3) a SQL server configuration manager error: Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SQL server configuration manager. Invalid namespace [0x8004100e]; and 4) SQL server management studio express error: Cannot connect to <computername>SQLEXPRESS... An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1).
These problems have been partially solved by: 1) completely removing Small Business Accounting 2006, Outlook Business Contact Manager Update, and MSDE (which appear to be codependent); and 2) removing and reinstalling Visual Basic 2005. However SQL Server still cannot be completely removed or reinstalled and therefore Visual Basic cannot connect to SQL datafiles.
When I most recently tried to remove SQL server 2005 using ARP, the installer reported that only the workstation component remains (Version: 9.00.1399.06 Edition: Express Edition Patch level: 9.00.1399.06), but is not removed by the ARP process. When I most recently tried to install SQL server 2005, the Setup Support Files install correctly, the System Configuration Check passes, but setup fails for MSXML6, SQL Server Database Services, and WorkStation components Books Online (detail log SQLSetup0068 file). According to Add/Remove programs, the following applications are installed:
Microsoft Visual Basic 2005 Express Edition ENU
Microsoft SQL Server Native Client
Microsoft SQL Server Setup Support Files (English)
Microsoft SQL Server VSS Writer
Microsoft SQL Server 2005
Various MSXML versions
Any help in un/reinstalling or configuring Microsoft SQL Server 2005 for use with Microsoft Visual Basic 2005 Express Edition would be dearly appreciated. Thanks.
View 2 Replies
View Related
Jan 15, 2015
we want to completely do away with access, on my report tool,which is crystal report, we want query to be our data source so , we do not want to use ssis packageor import from access to sql, how can l handle bringing all table and the query from Access together.
View 1 Replies
View Related
May 29, 2008
Trying to install SQL Server 2005 x64 Enterprise Edition during the "Workstation components, etc." part of the install, the install stops and gives me this error.
----------------------
Microsoft SQL Server 2005 Setup
Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024893
Error message: The system cannot find the path specified.
Error description: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the path specified.
[Abort] [Ignore] [Retry]
----------------------
This install is being attempted on 3 seperate servers all running Windows Server 2003 R2 Enterprise x64 Edition (Service Pack 2).
Futher notes:
Distributed Transaction Coordinator services is setup and running (started).
I checked to make sure there are no MSMQ components in the COM+ Application struture in Component Services.
View 3 Replies
View Related
Dec 20, 2006
Hello,
I am using 'SQL Server 2005 Reporting Service' in my project. I am using sub-reports in many cases. Whenever I export such reports containing sub-reports to 'Excel' format which is the major client requirement in our project, the exported excel file shows 'Subreports within table/matrix cells are ignored.'
Can anybody tell me the solution for this? If not possible in reporting service then is there any other way to get data in excel format?
Thanks.
-Salil
View 1 Replies
View Related
Nov 19, 2007
Hello everybody!
I'm trying to configure a ReportServer in a Non-DefaltWebSite in my server. During the Reporting Server Configuration's process, everything works fine! All the informations are accept. But, when I try to access the address http://myserver.com/reportserver (or http://myserver.com/reports) a login message box is shown.
I've already tried to enable a lot of user accounts, but with no success!
I've read some articles that try to explain how to install a ReportServer in a Non-DefaultWebSite, but its doesn't work too.
Any sugestions?
My server is a Windows 2003 Standard Edition w/ SP1, IIS 6.0, SQL Server 2005 Express Edition Advanced Server.
Regards,
Jorge Olimpia
View 1 Replies
View Related
Oct 2, 2002
Running version 6.5 on Windows 2000 and I am unable to find an obvious uninstall utility from the start menu or installation cd...can someone please inform me of how to do this?? Thanks!
View 3 Replies
View Related
Sep 24, 2006
Hi,I’m having a problem uninstalling SQL Server 2005. I went into add/remove programs,clicked on each of the entries for all of the associated services to remove them,then removed SQL Server 2005, rebooted, and the tasks are still listed in services.There are no entries in add/remove programs.I’m removing SQL Server in order to install Visual Studio first - I’ve still gota problem with the “Package Load Failure” that I posted about last week:http://forums.asp.net/thread/1402873.aspxCan anyone give me a clue as to how I can completely remove SQL Server?I’m running Win 2k SP4.Thanks!
View 4 Replies
View Related
Oct 27, 2006
Hi all,Afetr a bad install of sql server 2005 which failed due to WMI problem; something that seems unfixable save a reinstall of windows.I am now left with a part installion of sql server 2005. From add/remove programs clicking 'remove' activates nothing as does change. However the files are there in program files.At start up I get multiple fatal errors etc.Does anyone know how I can unistall SQL server 2005 completely - perhaps from the command line?Or..how could I stop SQL server from trying to start at start up?All help most appreciated.TFM
View 1 Replies
View Related
