Unable To Configure Database Setup In Reporting Service 2005
Apr 29, 2008
Hi,
I have installed SQL Reporting Service on one server. Using the config tool, I am trying to setup the Reporting Database on a seperate SQL instance. This SQL instance is running on a Clustered SQL 2005 server.
The creation of the Database is sucessful. However when I give the Windows credentials to connect to this database on the same page, I always fail at the following task : Setting Connection Info for Reporting Server. The error message is :
"System.Runtime.InteropServices.COMException (0x800706B3)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObject.Get()
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetDatabaseConnection(String server, String database, ConfigurationCredentialsType credsType, String userName, String password)"
The Windows Account I am using has Full SQL Rights to the Clustered SQL Server. I have seen other posts on the forums about the 0x800706B3 error, but most of them are related to a problem with RPC.
The Reporting Services account is runing under 'Network Services'. I am not sure if this is causing the problem?
Thoughts anybody?
Thanks,
Mahmood
View 8 Replies
ADVERTISEMENT
Oct 12, 2007
Hi all, I tried to configure reporting services configuration by the following
step 1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and click Reporting Services Configuration.
when i did the above step, i received the following error..
No report servers were found on the specified machine.
Details: Invalid namespace
But i installed SQL server 2005 version.
Pls help me to solve this..
Thanks in advance..
Regards Nataraj.C
View 1 Replies
View Related
Feb 20, 2008
Vista + SQL Server 2005
Reporting Service Configuration Tool: No Red Cross.
http://localhost/reportserver get this error:
HTTP Error 403.1 - Forbidden
You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run.
http://localhost/reports get this error:
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I googled but not found anything useful.
Thanks in advance!!!
View 8 Replies
View Related
Aug 20, 2015
I needed to re-install the entire sql server 2005, I used add/remove program. everything went normal, except reporting service. I deleted the entire upper sql server directory, rebooted the box, however, it still shows up in services, even though the path does not exist. I tried to reinstall it again, but it complains about name already exists. I cannot change the name, but I am not able to find how I can remove it and reinstall it properly.
Last Action : DetectInstanceClash
Error String : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name.
Error Number : 28086
View 3 Replies
View Related
Dec 20, 2006
Hello,
I am using 'SQL Server 2005 Reporting Service' in my project. I am using sub-reports in many cases. Whenever I export such reports containing sub-reports to 'Excel' format which is the major client requirement in our project, the exported excel file shows 'Subreports within table/matrix cells are ignored.'
Can anybody tell me the solution for this? If not possible in reporting service then is there any other way to get data in excel format?
Thanks.
-Salil
View 1 Replies
View Related
Feb 20, 2008
I am setting up a web server and I'm having some issues with database connections. I am running Windows Server 2k3 and SQL Server 2005. The error I get is when I attempt to connect to the database, it's the following:
Cannot open database "dbReseacher" requested by the login. The login failed. Login failed for user 'userRes'.
The following is my connection string:
<add name="RESEARCHER" connectionString="Data Source={Sql Server}; Server=THRALL2; Database=dbReseacher; Uid=userRes; Pwd=password;"/>
In SQL Server Management Studio, the user userRes is listed under Security -> Logins, but it is not listed under Database -> dbResearcher -> Security -> Users. Originally it was listed under both and this didn't solve the problem.
Please let me know if you any ideas or questions that I can answer. Thanks a lot.
-Richard
View 1 Replies
View Related
Jan 10, 2007
I am trying to configure a reporting server on my laptop at work. This laptop is running Vista and IIS 7. When I install reporting services, the option for "Install the default configuration" is disabled (greyed out) during setup. The install is successful, but then when I try to connect in the Reporting Services Configuration Manager, I get an unhandled exception ("A WMI error has occurred an no additional error information is available."). If I continue, this error continues to crop up as I attempt to configure the Report Server. When I attempt to configure the virtual directory, the configuration manager crashes. Then, when I navigate to the reportserver page, I get a page that states:
Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
Any ideas for a solution or workaround would be greatly appreciated.
Thanks,
Dave
View 1 Replies
View Related
May 16, 2008
I've created a SSIS package with a DataReaderDestination and a SSRS report that points to it.
I referenced these links during development and I have everything working as expected locally. **I changed the config files as stated on both my local machine and our server. My config matches the example exactly.
http://msdn.microsoft.com/en-us/library/ms345250.aspx
http://msdn.microsoft.com/en-us/library/ms159215.aspx
When I attempt to deploy my report project to the server I get this error message:
"An attempt has been made to use a data extension 'SSIS' that is not registered for this report server."
In the report manager data source properties page it reads:
"The data processing extension used for this report is not available. It has either been uninstalled, or it is not configured correctly."
In SQL Server Management Studio data source properties page SSIS is not a data source type option.
I've tried restarting both the Reporting Services and Integration Services on the server to no avail.
Any suggests? My problem is I can't get the SSIS to be recognized source on the server.
View 1 Replies
View Related
Jan 30, 2008
Hi there, I have a stupid question
When I want to configure reporting service in a computer it needs Windows SharePoint Service. But When I installed and configured it in my own PC it asked for database server location instead. Anybody have any idea about this?
View 1 Replies
View Related
Jan 25, 2008
When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace
What is the problem and how to solve it.
View 1 Replies
View Related
Jul 23, 2012
I am working with a client who is rolling out 50+ VM's based of a template we created. This is SQL 2012 CU1 running on Windows Server 2008 R2. Using the default service account the installer has it registers fine and we get the following in the SQL log.
The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service.
When we change to a domain service account through SQL configuration manager we see the following and cannot connect remote using integrated authentication The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service. Windows return code: 0x2098, state: 15. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
My understanding is you should and could change service accounts using the SQL Server Configuration Manager and it would set all permissions. Is there something we need to do in addition to get this up and working?
Convert DTS to SSIS |
Document SSIS |
30+ SSIS Tasks |
Real-time SSIS Monitoring |
Quick Starts |
BI Blitz
View 9 Replies
View Related
Jul 12, 2007
hi, I have problem initialize report server after upgrade to SP2.. It keep saying Could not locate entry i sysdatabases 'myDatabaseName'. while i'm sure my database existing. Here's the log
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3161.00</Product>
<Locale>en-US</Locale>
<TimeZone>Malay Peninsula Standard Time</TimeZone>
<Path>C:Program Files (x86)Microsoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServerService__07_12_2007_11_38_15.log</Path>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!resourceutilities!4!12/07/2007-11:38:15:: i INFO: Reporting Services starting SKU: Enterprise
ReportingServicesService!resourceutilities!4!12/07/2007-11:38:15:: i INFO: Evaluation copy: 0 days left
ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Catalog SQL Server Edition = Enterprise
ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Current DB Version C.0.8.40, Instance Version C.0.8.54.
ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Starting upgrade DB version from C.0.8.40 to C.0.8.54.
ReportingServicesService!library!8!12/07/2007-11:38:16:: e ERROR: Exception caught while starting service. Error: System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'CCGM_'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()
ReportingServicesService!library!8!12/07/2007-11:38:16:: e ERROR: Attempting to start service again...
View 6 Replies
View Related
Mar 30, 2007
Dear All,
I am making web application using Asp.net C#(Visual Studio2005). And Sql server 2000 as a back End upgraded with service pack 3 and analysis service.
Now I am trying to install sql server 2000 report services. But I run SQL2KRSSP1-ENG.EXE setup
Then following error occurs
The upgrade patch can not be installed by window installer because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.
I redownload the same exe to other location. And again run but getting same error
Please Guide me or atleast give some help full link.
thanks
View 1 Replies
View Related
Feb 28, 2007
I am trying to access the Reporting Services Web Service, but i m not able to make it work. i tried with default credentials and network credentials
ReportingService service = new ReportingService();
service.Credentials = new System.Net.NetworkCredential("username", "password", "domain");
service.CreateSubscription(report, extSettings, description, eventType, matchData, parameters);
This is the exception i getThe current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Source Error:
Line 3382: [return: System.Xml.Serialization.XmlElementAttribute("SubscriptionID")]
Line 3383: public string CreateSubscription(string Report, ExtensionSettings ExtensionSettings, string Description, string EventType, string MatchData, ParameterValue[] Parameters) {
Line 3384: object[] results = this.Invoke("CreateSubscription", new object[] {
Line 3385: Report,
Line 3386: ExtensionSettings,
View 5 Replies
View Related
Oct 22, 2006
I got this error message during SQL Server Express install with no error code on Server 2003 SP1. I'm installing on an older development machine and although I do have a very large log file somewhere I wanted to post before I even dug into it. I noticed in IIS under my Webs that the MSSQLExpress webs were there at first but when I clicked on them to get any info or Properties... they dissapeared. So they were almost installed but they no longer exist. Also I do not have a SQL Service Manager icon down near the clock.
I almost took a step to fix this. After reading a few posts about similar problems I thought maybe this happened because the Default Web Sites IP # was not set to (All Unassigned). I was going to try a repair install from Add/Remove Programs but the temporary setup files are already gone. I really dont want to uninstall all 5 SQL components from Add/Remove Programs and start from scratch.
As good security practice we usually remove the Default Web or as in this development servers case we changed the IP from (All Unassigned) to an IP that is only accessible from certain machines on the internal network. I obviously should have read more pre setup guides. Anyway how can I fix this without reinstalling everything?
View 2 Replies
View Related
Feb 6, 2008
Hi,
I'have this error during install of Microsoft SQL Server 2005 Express Edition (x86). I'm Using Windows XP Professional with SP2 Build 2600. Does anyone knows how to solve this?
****
Microsoft SQL Server 2005 Setup was unable to install on your computer.
EventType : sql90setup P1 : unknown P2 : 0x659 P3 : unknown
P4 : 0x659 P5 : unknown P6 : unknown P7 : msxml6.msi@6.10.1129.0
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab
View 2 Replies
View Related
Apr 21, 2008
Hi,
I have a Windows 2008 server 64-bit SP1 and I have installed SQL 2005 SP2 Enterprise Edition 64-bit. My current version is 9.00.3042.00. I am trying to configure Reporting Services and I am having lots of trouble getting the Application Pools to work properly. I have followed the Microsoft Technet paper 839480 "How to Install and Configure Reporting Services on Windows Server 2008". In the "Configure Reporting Services" part, I have successfully configured everything (all arrows are green) and have the following setup:
Report Server Virtual dir: ReportServer Default Web Site
Report Manager Virtual dir: Reports Defualt Web Site
Windows Service Identity: ReportServer with a service acct login
Web Service Identity:
Report Server: ReportServer,
Report Manager: DefaultAppPool (I get an error when I try to configure it to anything else: ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
The one thing I notice in the SQL Server configuration manager is that there is a red dot next to the SQL Reporting Services services even though the green arrow is there to show it is running.
When I look in IIS7, I see the application pools Reports and ReportServer and they are both in Integrated mode. When I try to go to http://localhost/reportserver, it gives an error. It will work if I change both application pools to classic. But then when I try to go to http://localhost/reports, I get an error:
"REQUEST IS NOT AVAILABLE IN THIS CONTEXT".
I have read up on IIS7 and it says that:
"This error is due to a design change in the IIS7 Integrated pipeline that makes the request context unavailable in Application_Start event. When using the Classic mode (the only mode when running on previous versions of IIS), the request context used to be available, even though the Application_Start event has always been intended as a global and request-agnostic event in the application lifetime."
So, how do I configure these application pools to work using IIS7 with SQL 2005 Reporting Services on a Windows 2008 server? I have tried all kinds of different things based on what I am reading on the net and nothing is working. Anybody have any suggestions?
Thanks!
Isabelle
View 3 Replies
View Related
Jul 4, 2007
Hi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
Sim
View 4 Replies
View Related
Sep 18, 2007
Hello,
We have vendor that is implementing an employee self serve application for current and potential employees (employment applications). There is a web server in our DMZ that has the application installed but also on the server is a SQL database that has names and social security numbers. This server will also query the backend accounting server for earnings statements and W2s. We have a Cisco ASA as the firewall and SSL to protect client authentication from the Internet. There is no SSL between the web server and the accounting server. The fact that the SQL database on the web server containing SSN associated with names concerns me. It seems that none of this information is masked or encrypted and can be seen if the server was to ever be compromised.
My idea of such a service involves a web server that queries the backend database over SSL and presents the information to the user over SSL. No personally identifiable information would be resident on the web server at all, just a facade. That is not the case and it is not what we described to them as to what we want.
It seems they have installed it the only way they know how which is not secure, or maybe it is, that's why I am here. They have installed this at numerous locations and they actually wanted any and all ports open between the web server and the backend accounting server. It took us a while to get them to follow the rule of least privilege but we essentially had to do it ourselves.
Also on our main webserver for our Internet site I found the test database they used almost 2 years ago to test this application along with names and SSN. This was before I arrived and there is no encryption or authentication for this server. Is this good secure practice? All my training says no but it is hard to believe a mutli-million dollar organization is this ignorant. I guess it shouldn't surprise me, TJX didn't pay attention either.
I saw this thread which provide some good information but I am not a database admin and I am not familiar with SQL services, etc.
My questions are: Is their implementation secure? Does anyone know where I can find more info regarding web services and HIPAA? I read where 2 firewalls are required but would like documentation to show. Any suggestions on how to implement this securely?
Thanks for the help,
Mike
View 3 Replies
View Related
May 18, 2006
I am installing the SQL Server 2005 SP1 "SQLServer2005SP1-KB913090-x86-ENU.exe" on my server and everything successfully installed except the Integration Services. Below is the error I received.
05/18/2006 09:37:04.640 Product: Integration Services
05/18/2006 09:37:04.671 Integration Services (RTM 2047 ENU) - Failure
05/18/2006 09:37:04.750 Details: Unable to install Windows Installer MSP file
Couple questions I guess. Are others getting the same thing? Is there a way to fix this so it will install like a work around? Last what will this affect by this not installing correctly?
View 3 Replies
View Related
Mar 31, 2006
Hello,
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
Thank you very much,
Annie
View 5 Replies
View Related
Apr 14, 2008
Hi Room,
I am new to SQL reporting 2005 and wanted to setup SQL 2005 reporting on stand along server 2003 box.
SQL Server 2005 server and reporting services were installed.
Can anyone provide me some hints how to setup the sql 2005 reports.?
Any articles or links.?
Thanks for the help.
TJ
View 1 Replies
View Related
Jun 10, 2007
Can anyone help me with a problem I have with SSRS 2005? How do I configure SQL Server 2005 Reporting Services to deliver subscription e-mails to addresses external to my windows domain?
I've been having trouble configuring the Report Server e-mail delivery component to send subscription e-mails to addresses outside the domain on which the report server is hosted.
For e.g. since my local windows domain is named "smartsystems.com", I have found that the Report Manager does not have any problems sending subscription mails to "eawagu@smartsystems.com" but throws up an error whenever I include "eawagu@yahoo.com" in the recipients' list.
Any insights?
View 1 Replies
View Related
Jul 4, 2007
hi all
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent
cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
Any advise?Thanks a lot.
View 3 Replies
View Related
Mar 7, 2007
Hi
For strange reasons, I am now unable to backup (archive) any of the databases in Analysis Service. :eek:
When I try to archive, I get a dialog box with the following error:
"[MicroSoft][ODBC Driver Manager] Data source name not found and no default driver specified"
I am able to process my cubes and dimensions and am totally lost as to why I'm getting this problem :S
Will appreciate your help.
Thanks.
View 2 Replies
View Related
Oct 4, 2007
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
SQLServer2005MSSQLServerADHelperUser$SQL1
SQLServer2005MSSQLUser$SQL1$SQLEXPRESS
SQLServer2005MSSQLBrowserUser$SQL1
I receive one alert int he event logs/application
EventID: 26010
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the
SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
View 6 Replies
View Related
Apr 17, 2014
I created a CLR procedure with a service reference in Visual Studio 2010 that is being used in SQL Server 2008 R2. We recently tried to deploy it to a 2012 SQL Server, but were unable to due to compatibility issues. When I tried to upgrade the package to Visual Studio 2013 I got this error message:
Unable to cast object of type 'Microsoft.VisualStudio.Data.Tools.Package.Project.DatabaseFileNode' to type 'Microsoft.VisualStudio.Data.Tools.Package.Project.Internal.FolderNode'
I tried to create this using the 2012 Data Tools, but was unable to add a service reference with the GUI. It appears Microsoft has removed this functionality. My company has a third party app that we have limited control over, which is why we need this functionality.
[URL]
View 0 Replies
View Related
Nov 8, 2006
Hi all,
I had to uninstall SQL2005 Service, client-tools & BI studio applications on my laptop running XP SP-2. Now, I'm trying a fresh install, a simple install of >>just<< the 2005 DB service is failing.
Snippet of log file-------------------------
MSI (s) (F8:80) [22:35:02:484]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (F8:80) [22:35:02:484]: Warning: Local cached package 'C:WINDOWSInstaller4c483c.msi' is missing.
Snippet of log file-------------------------
CSetupBootstrapWizard returned 1
<EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'>
Failed to find help file for LCID :3081
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2006/10/8 22:18:10, returned true
Running: SetPackageInstallStateAction at: 2006/10/8 22:18:10
Complete: SetPackageInstallStateAction at: 2006/10/8 22:18:12, returned true
Running: DeterminePackageTransformsAction at: 2006/10/8 22:18:12
Complete: DeterminePackageTransformsAction at: 2006/10/8 22:18:25, returned true
Running: ValidateSetupPropertiesAction at: 2006/10/8 22:18:25
Complete: ValidateSetupPropertiesAction at: 2006/10/8 22:18:25, returned true
Running: OpenPipeAction at: 2006/10/8 22:18:25
Complete: OpenPipeAction at: 2006/10/8 22:18:25, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2006/10/8 22:18:25
Complete: CreatePipeAction at: 2006/10/8 22:18:25, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
The OWC11 setup failure is triggerring SQL DB Service installation to fail as well.
Please help!!!
Regards,
Uday
View 7 Replies
View Related
Jul 21, 2005
Hi
I am trying to install SQL server 7 on XP. I did not install any prerequisite such as service pack 4. During the installation process, I received a error message that says:
'Setup fail to configure the server. Refer to server errorlog and cnfigsvr.out for more information. '
In Errorlog file, the last part of it says:
.
.
.
SQL server's unicode collation is:
'English' (ID =1033) Comparison style =196609
SQL server's non-unicode sort order is:
'no case_iso'(ID=52)
SQL servers non-Unicode character setn is 'iso_1(ID=1)
Warning:
Override, autoexec procedures skipped.
Closing file c:MSSQL7DATAmodel.mdf
Closing file c:mssql7datamodelling.ldf
SQL server is terminating due to 'stop' request from service Control Manager.
In cnfgsvr.out
.
.
.
[Microsoft][ODBC SQL Server Driver][SQL Server] Successfully attached database 'Northwind'
Disconnecting from Server...
Stopping Server ......
Starting Server ......
An error occured while attempting to start the service (1460)
SQL server configuration failed.
Please, help me on how to complete the installation.
Or
Is it because of the service pack 4 that I didn't install that is causing the problem.
View 3 Replies
View Related
Jun 22, 2015
I'm trying to connect to a database using a service account that we got created. The ID is an AD account and was added to the db as such. When I try to connect to the database using the account with the password I get [login failed for domainid]. The DBA mentioned that its setup to use windows auth, however, I can't connect with this service account using windows Auth, due to I'm using to connect via code.
How can I connect to the database from my code using this ID?
I have the ID and pwd in my code to connect with, does the ID have to be setup differently in the Database?
View 1 Replies
View Related
Feb 22, 2007
I have installed SP2 on my SQL 2005 instance which also houses RS of course. Additionally I installed WSS3.0 without configuring it so it has the Object Model installed (should be enough?)
I am running WSS 3.0 on a seperate Server and have the Add-in installed on there.
Following the installation instructions I am going to Application Management to configure WSS, but there is no section called "Reporting Services". Looking on the Report Server, in the Configuration I see the following error under the SharePoint Integration Setting:
The report server cannot access settings in the SharePoint configuration database. Most likely, the Windows SharePoint Services object model is not installed or the Report Server Web Service and Windows service accounts do not have access to SharePoint databases. To configure service account access, use SharePoint Central Administration.
In my SharePoint Site I do see a SharePoint section under the "Site Settings" for managing shared schedules but I think the main issue is, that I don't see that section in Central Administration.
Any help is greatly appreciated.
View 3 Replies
View Related
Mar 12, 2007
In this article http://download.microsoft.com/download/f/1/0/f10c4f60-630e-4153-bd53-c3010e4c513b/ReadmeSQLEXP2005.htm , it explains that you must fully enable the security settings to allow use of transaction processing for a SqlExpress database. Is there a way to set these option in a setup? Or is there another way to use transaction processing without setting these options?
Thanks
Dave T
View 1 Replies
View Related
