Unable To Configure Reporting Services To Use SSIS Datasource
May 16, 2008
I've created a SSIS package with a DataReaderDestination and a SSRS report that points to it.
I referenced these links during development and I have everything working as expected locally. **I changed the config files as stated on both my local machine and our server. My config matches the example exactly.
http://msdn.microsoft.com/en-us/library/ms345250.aspx
http://msdn.microsoft.com/en-us/library/ms159215.aspx
When I attempt to deploy my report project to the server I get this error message:
"An attempt has been made to use a data extension 'SSIS' that is not registered for this report server."
In the report manager data source properties page it reads:
"The data processing extension used for this report is not available. It has either been uninstalled, or it is not configured correctly."
In SQL Server Management Studio data source properties page SSIS is not a data source type option.
I've tried restarting both the Reporting Services and Integration Services on the server to no avail.
Any suggests? My problem is I can't get the SSIS to be recognized source on the server.
View 1 Replies
ADVERTISEMENT
Jan 10, 2007
I am trying to configure a reporting server on my laptop at work. This laptop is running Vista and IIS 7. When I install reporting services, the option for "Install the default configuration" is disabled (greyed out) during setup. The install is successful, but then when I try to connect in the Reporting Services Configuration Manager, I get an unhandled exception ("A WMI error has occurred an no additional error information is available."). If I continue, this error continues to crop up as I attempt to configure the Report Server. When I attempt to configure the virtual directory, the configuration manager crashes. Then, when I navigate to the reportserver page, I get a page that states:
Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
Any ideas for a solution or workaround would be greatly appreciated.
Thanks,
Dave
View 1 Replies
View Related
Oct 12, 2007
Hi all, I tried to configure reporting services configuration by the following
step 1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and click Reporting Services Configuration.
when i did the above step, i received the following error..
No report servers were found on the specified machine.
Details: Invalid namespace
But i installed SQL server 2005 version.
Pls help me to solve this..
Thanks in advance..
Regards Nataraj.C
View 1 Replies
View Related
Feb 20, 2008
Vista + SQL Server 2005
Reporting Service Configuration Tool: No Red Cross.
http://localhost/reportserver get this error:
HTTP Error 403.1 - Forbidden
You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run.
http://localhost/reports get this error:
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I googled but not found anything useful.
Thanks in advance!!!
View 8 Replies
View Related
Apr 29, 2008
Hi,
I have installed SQL Reporting Service on one server. Using the config tool, I am trying to setup the Reporting Database on a seperate SQL instance. This SQL instance is running on a Clustered SQL 2005 server.
The creation of the Database is sucessful. However when I give the Windows credentials to connect to this database on the same page, I always fail at the following task : Setting Connection Info for Reporting Server. The error message is :
"System.Runtime.InteropServices.COMException (0x800706B3)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObject.Get()
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetDatabaseConnection(String server, String database, ConfigurationCredentialsType credsType, String userName, String password)"
The Windows Account I am using has Full SQL Rights to the Clustered SQL Server. I have seen other posts on the forums about the 0x800706B3 error, but most of them are related to a problem with RPC.
The Reporting Services account is runing under 'Network Services'. I am not sure if this is causing the problem?
Thoughts anybody?
Thanks,
Mahmood
View 8 Replies
View Related
Mar 15, 2008
help pls - pulling hair out on this one
am doing proof-of-concept for reporting services reports getting data via web services.
got it working for simple examples (passing back strings etc)
also woking passing back an object
but cant get it working with a dataset - am having trouble filtering out the XML resultset
this is my webmethod
[WebMethod]
public DataSet DSetExample()
{
DataSet ds = new DataSet("XMLTest");
DataTable dt = new DataTable();
DataColumn dc;
dc = new DataColumn("IntegerColumn1", System.Type.GetType("System.Int32"));
dt.Columns.Add(dc);
dc = new DataColumn("StringColumn1", System.Type.GetType("System.String"));
dt.Columns.Add(dc);
dc = new DataColumn("DecimalColumn1", System.Type.GetType("System.Decimal"));
dt.Columns.Add(dc);
dc = new DataColumn("DateTimeColumn1", System.Type.GetType("System.DateTime"));
dt.Columns.Add(dc);
DataRow drow = dt.NewRow();
drow["IntegerColumn1"] = 1;
drow["StringColumn1"] = "WTF";
drow["DecimalColumn1"] = 205.299;
drow["DateTimeColumn1"] = DateTime.Parse("22/May/1966");
dt.Rows.Add(drow);
ds.Tables.Add(dt);
return ds;
}
this is my basic query
<Query>
<ElementPath IgnoreNamespaces="true">*
</ElementPath>
<Method Name="DSetExample" Namespace="http://localhost/testservice1">
</Method>
</Query>
this just gives me the first node details
but when ever i try and specify the elements i want by using the ElementPath
nothing comes back....
just need to know how to specfiy the ELEMENTPATH to return the dataset details...
thx
View 6 Replies
View Related
Oct 25, 2007
Hi everybody,
I was wondering if it's possible to use a sharepoint list as datasource in reporting services ? If yes, what's your trick ?
Is it possible to use a directory as datasource in reporting services ?
Thanks for your response,
Have a nice day,
Aurore
View 3 Replies
View Related
Apr 25, 2006
I'm trying to build WebService to use result as DataSource for RS 2005 (XML DataSource).
But I have a strange problem.
I have WebMethod with parameters.
When I'm testing my WS in browser then everything works just fine.
But... When I'm trying to call this web-service from VS2005 environment then something strange happens.
Looks like VS passing parameters incorrectly to my WS (not passing at all!)
I've created very simplyfied version just to check parameters:
using System.Xml;
using System.Xml.Serialization;
using System.Messaging;
using System.Text;
using System;
using System.Web.Services;
[WebService(Namespace = "http://company.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
public class GetRemoteData : System.Web.Services.WebService
{
[WebMethod]
public XmlElement GetData(string CompanyName, string FunctionName, string ParameterList)
{
XmlDocument xmlDocument = new XmlDocument();
XmlElement xmlElement1;
xmlElement1 = xmlDocument.CreateElement("parameters", "values", "urn:errors");
xmlElement1.InnerText = String.Format("{0}, {1}, {2}", CompanyName, FunctionName, ParameterList);
return xmlElement1;
}
}
In the browser WS returns all passed parameters back correctly. VS - not.
What's wrong with my code? Why MSDN example works fine?
Do I need to specify some undocumented (soap specific) attributes?
Where I can find full tutorials how to create RS-compatible web-service?
(Sorry for cross-posting but I have no single reply...)
View 3 Replies
View Related
Dec 14, 2007
I am new to both Reporting Services and Webservices implementation so I am just trying to use a simple example. I found a Webservice on the internet that returns movie information:
http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx?wsdl
I am trying to call in using XML DataSource and with absolutely no luck. Here are the steps I have followed:
DataSource type: XML
Connection String: http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx
Report Data Quert:
<Query>
<SoapAction>http://www.ignyte.com/GetUpcomingMovies</SoapAction>
<Method Namespace="http://www.ignyte.com/whatsshowing" Name="GetUpcomingMovies">
<Parameters>
<Parameter Name="month">
<DefaultValue>12</DefaultValue>
</Parameter>
<Parameter Name="year">
<DefaultValue>2007</DefaultValue>
</Parameter>
</Parameters>
</Method>
<ElementPath>RunQueryResponse{}/RunQueryResult{}/diffgram{}/DataSetName/TableName</xmldp:ElementPath>
</Query>
I am getting an error: The XmlDP query is invalid. (Microsoft Report Designer)
Any help? I am trying to figure out this simple example so I can apply it to my own webservice.
Thanks
View 1 Replies
View Related
Jun 12, 2015
We have 15-20 report server environments including Dev/SIT/UAT/PROD/DR etc. so instead of configuring it on each servers, we would like a script to use with parameters.
After installing the SSRS 2012 package on each server with given instance and service account, I would like to configure the SSRS through script instead on running the Configuration manager RSConfigTool.exe manually.
we already have created the database beforehand using the scripts provided by WMI. do we need db_owner permission on msdb and master database to configure SSRS?
View 2 Replies
View Related
Aug 22, 2007
I have a report created using MS SQL Server 2005 reporting services and deployed to the report server. I added a subscription for the report to be scheduled to run and emailed to someone on a regular basis. But now we want the report emailed ONLY when there is data returned. If no data is returned after the report runs then don't email it.
Does anyone know how to do that?
Thanks!
View 10 Replies
View Related
May 22, 2015
Data Source of the report is AS/400 and I need to create a report in visual studio 2013 with ODBC Connection type and deploy report onto share point 2013. How to create report, data source and deploy on share point.
My problem is how we will create ODBC connection with AS/400 and connect report with AS/400.
View 2 Replies
View Related
Apr 21, 2008
Hi,
I have a Windows 2008 server 64-bit SP1 and I have installed SQL 2005 SP2 Enterprise Edition 64-bit. My current version is 9.00.3042.00. I am trying to configure Reporting Services and I am having lots of trouble getting the Application Pools to work properly. I have followed the Microsoft Technet paper 839480 "How to Install and Configure Reporting Services on Windows Server 2008". In the "Configure Reporting Services" part, I have successfully configured everything (all arrows are green) and have the following setup:
Report Server Virtual dir: ReportServer Default Web Site
Report Manager Virtual dir: Reports Defualt Web Site
Windows Service Identity: ReportServer with a service acct login
Web Service Identity:
Report Server: ReportServer,
Report Manager: DefaultAppPool (I get an error when I try to configure it to anything else: ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
The one thing I notice in the SQL Server configuration manager is that there is a red dot next to the SQL Reporting Services services even though the green arrow is there to show it is running.
When I look in IIS7, I see the application pools Reports and ReportServer and they are both in Integrated mode. When I try to go to http://localhost/reportserver, it gives an error. It will work if I change both application pools to classic. But then when I try to go to http://localhost/reports, I get an error:
"REQUEST IS NOT AVAILABLE IN THIS CONTEXT".
I have read up on IIS7 and it says that:
"This error is due to a design change in the IIS7 Integrated pipeline that makes the request context unavailable in Application_Start event. When using the Classic mode (the only mode when running on previous versions of IIS), the request context used to be available, even though the Application_Start event has always been intended as a global and request-agnostic event in the application lifetime."
So, how do I configure these application pools to work using IIS7 with SQL 2005 Reporting Services on a Windows 2008 server? I have tried all kinds of different things based on what I am reading on the net and nothing is working. Anybody have any suggestions?
Thanks!
Isabelle
View 3 Replies
View Related
Jan 28, 2014
A customer use SCSM 2012 RTM and recently they changed the password of the account that connects with the datasources that use Service Manager to generate reports. There are several datasources namely DWStagingAndConfig, ConfigurationManager, DWDataMart and other ones.The process to change the password of the account, done via web in the SSRS URL instance of Service Manager, requires to enter in the Manage option of each DataSource and replace the password with the right one in the Properties section; is a really simple step. However, after the change, the only Datasource that not allows to access again to the Manage option is DWStagingAndConfig (appears a message that points out to a report server internal error);I append a extract of the SSRS log related to the problem with this Datasource.
library!ReportServer_0-109!3024!01/22/2014-14:54:14:: Call to GetPermissionsAction(/SystemCenter/ServiceManager/DWStagingAndConfig).
library!ReportServer_0-109!8820!01/22/2014-14:54:14:: Call to GetSystemPermissionsAction().
library!ReportServer_0-109!8820!01/22/2014-14:54:14:: Call to GetSystemPropertiesAction().
library!ReportServer_0-109!8ab8!01/22/2014-14:54:15:: Call to GetDataSourceContentsAction(/SystemCenter/ServiceManager/DWStagingAndConfig).
library!ReportServer_0-109!8ab8!01/22/2014-14:54:15:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
[code]...
View 11 Replies
View Related
Mar 7, 2007
When creating a report using reporting Services with a cube as a datasource, visual studio 2005 hangs. I have applied SP1 to visual studio.net 2005 .
This is the query generated by query designer in reporting services. When I try to drag and drop another dimension to slice it by , visual studio hangs.
The fact table has just 10,000 records. Are the number of dimensions used to slice the cube too many? How do I optimize this query?
SELECT NON EMPTY { [Measures].[Avg MT Rate - Speech], [Measures].[Change in Avg MT Rate], [Measures].[Edited Lines Per 1000], [Measures].[Speech Utilization], [Measures].[Time Saved %], [Measures].[Speech Edited for Rev 1], [Measures].[Change in Account Productivity], [Measures].[Hours Saved], [Measures].[Lines Per 1000], [Measures].[Average MT Rate - Total Production], [Measures].[Typed Lines], [Measures].[Productivity Time in hours - Edited Docs],[Measures].[Productivity Time in Hours - Typed Docs],[Measures].[Productivity Time in Hours]} ON COLUMNS, NON EMPTY { ([Dim Customer].[Customer Name].[Customer Name].ALLMEMBERS * [Dim Customer].[Dictator Site Name].[Dictator Site Name].ALLMEMBERS * [Dim Date].[The Month].[The Month].ALLMEMBERS * [Dim Date].[The Year].[The Year].ALLMEMBERS * [Dim MT].[Creator Last Name].[Creator Last Name].ALLMEMBERS * [Dim MT].[Creator First Name].[Creator First Name].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOMEMBER(@FromDimDateTheYear, CONSTRAINED) : STRTOMEMBER(@ToDimDateTheYear, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOMEMBER(@FromDimDateTheMonth, CONSTRAINED) : STRTOMEMBER(@ToDimDateTheMonth, CONSTRAINED) ) ON COLUMNS FROM [ETL DW])) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
View 1 Replies
View Related
Jun 10, 2007
Can anyone help me with a problem I have with SSRS 2005? How do I configure SQL Server 2005 Reporting Services to deliver subscription e-mails to addresses external to my windows domain?
I've been having trouble configuring the Report Server e-mail delivery component to send subscription e-mails to addresses outside the domain on which the report server is hosted.
For e.g. since my local windows domain is named "smartsystems.com", I have found that the Report Manager does not have any problems sending subscription mails to "eawagu@smartsystems.com" but throws up an error whenever I include "eawagu@yahoo.com" in the recipients' list.
Any insights?
View 1 Replies
View Related
May 31, 2007
(I asked this question in another forum, but think it may be more of asql question)Hi.I bet this is a 101 question, but i'd appreciate any help!I am in the 'where...' section of the configure data source wizzard .(Visual Studio 2005) Column:(From my table) I select 'UserName' from drop-downOperator: I select '=' from drop-downBUT how do I get the UserName (The user is signed into the app) to pass to the where clause?Is it from the Form? Profile? Session?Ive tried Form.Page.User.Identity.Name.ToString; Form.NamingContainer.Page.User.Identity.Name.ToString; Profile.UserName; NOTHING works. IF I set the default value to a user name (eg joe_user) it retrieves fine, but I need it to retrieve for the currently signed in user. THANKS In advance.... Dan
View 7 Replies
View Related
Apr 24, 2008
All,
While trying to access the Reporting Services in Mng studio.I receive the following error
Cannot Connect To ServerA
Client found response content type of 'text/html; charset=uf-8,but expected 'text/xml'
While trying to access the report on reportmanager.I receive an error."The report server is not responding.Verify that the report server is running and can be accessed from this computer"
Any suggestion?
View 4 Replies
View Related
Aug 23, 2007
Hi all,
I am new to reporting services. I have created a report project in SQL Server BIDS. The datasource is SQL Server. I was able to see the preview of the report and could build and deploy the report. But when I try to run the report, it gives me error. So I tried connecting to Reporting Services through SQL Server Management Studio.
There I am unable to connect to the Reporting Services.
I am getting a very long error message. Giving below few lines which made sense to me.
Client found response content type of text/html; charset=utf-8, but expected text/xml.
Parse Error Message : An error occurred loading a configuration file: Access to the path c:Inetpubwwwrootweb.config is denied
I have given full rights to ASPNET, AuthenticatedUsers.
Pl help to resolve this issue.
Thanks,
Tejaswini
View 14 Replies
View Related
Mar 23, 2008
I can select the tables and fields, but when I click on Advanced the Check Box to Create the Commands is not available. they are dimmed out.
Why is this happening, is it a setting that I have missed. Any help is appreciated.
View 1 Replies
View Related
Apr 20, 2015
We have created and scheduled some test reports via Idera performance tool but we are unable to delete the reports. These are not custom reports and reports created with Schedule Email option in Idera. Unfortunately, I dera does not have any option to delete these reports and support is asking me if I tried this by deleting from SQL Server Reporting Services.I looked at the Reporting services but can't find any place to delete these reports. This link does not provide any support because I don't have these (Or Report Manager)----> Configuration Manager console, navigate to System Center Configuration Manager / Site Database / Computer Management / Reporting / Reporting Services.
URL....All I have is "Reporting Services Configuration Manager" under "Configuration Tools". How can I delete these reports from SQL Server Reporting services ?. Can I delete them from some tables in Reports databases ?. If so, what are the tables ?. I delete the jobs from SQL Server but the jobs are automatically created the next day emailing the reports again..
View 3 Replies
View Related
Apr 9, 2007
Hi ,
i'm a new to vista and also with sql server 2005 reporting services ..
i was able to install all the tools in sql2005 express edition except reporting services ..gives a message IIS required ..even though the IIS is running and able to browse http://localhost ..
can any one give me an idea , how to install reporting services on vista with IIS7
Thanks
View 1 Replies
View Related
May 17, 2007
I have written Custom delivery extension, I am trying to debug this by attching the process ReportingServicesService.exe , I am getting error "Unable to Attach to the Process.Access is denied". I am Admin on my sytem, ASP.net is also part of admin and debuggers group. I am using Visual studio 2005, reporting services 2005, ReportingServicesService.exe is also under my login
Any idea??
View 4 Replies
View Related
Aug 4, 2015
I am having SQL query which has inner join table from another Database. The below highlighted query shows its values.
/*Trend and Capacity Report*/
SELECT MEA.DisplayName AS Cloud, MEB.DisplayName AS VM, OS.PropertyValue AS OS, CONVERT(varchar(17),PD.DateTime,113) AS Date,Â
VM3.VirtualCPUCount AS VCPU
FROM Perf.vPerfDaily AS PD
INNER JOIN vPerformanceRuleInstance AS PRI ON PD.PerformanceRuleInstanceRowId = PRI.PerformanceRuleInstanceRowId
INNER JOIN vPerformanceRule AS PR ON PRI.RuleRowId = PR.RuleRowIdÂ
[code]....
My request is to calculate total capacity of all available Virtual CPUs, Memory and Storage from 4 separate clouds: Â 'cloud1','cloud2','cloud3','cloud4'
Whenever I select =Sum(Fields!VCPU.Value) expression in Report Properties and assign it to a variable and assign that variable to a Text Box field I get the value as VCPU * (Number of VMs) which is not correct.
I am looking to get the value of VCPU from all 4 clouds above.
View 9 Replies
View Related
Mar 21, 2008
We have a request to build a report based on user input from an excel spreadsheet. We have a SSIS package that imports the data from Excel. This is run by a sql server agent job. Our stored procedure executes this job and runs this whole process just fine but when we execute the stored procedure from reporting services we get errors. Has anyone done this type of thing before and do you have any working solutions for how to get this reporting methodology to function?
Thanks!
View 4 Replies
View Related
May 15, 2015
I have deployed SSRS reports to the Report Server, but am not able to open them in PDF.Â
View 3 Replies
View Related
Apr 22, 2015
I have two SQL 2014 Enterprise Edition installed with the SSRS (native) role installed.
Both server are configured separately with their own Report Server database. Now I want to configured a scale out deployment with a shared database.
On Server 1, I created a new Report Server database. On the second server, I change the database and joined the existing database. The problem is that the second server never shows up under Scale-Out deployment (Waiting to Join).
View 6 Replies
View Related
Apr 6, 2008
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK
Name: ReportServer1
Website: Default Web Site
ii) Report Manager Virtual Directory
Name: Reports1
Website: Default Web Site
iii) Windows Service Identity
Service name: ReportServer
Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup
Servername €“ Nameofmyserver
Database name - ReportServer1
Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
View 5 Replies
View Related
May 20, 2015
when I try to open the SSRS in BIDS ( VS 2008), it is displaying the code portion alone. If i click 'View Designer', it prompts me like "....already opened. Do you want to close?" Only XML content of report is displaying. if I click 'Viee Code' then it displays error like "There is no editor available for 'c: eport Sample. rdl'.Make sure the application for the file type (.rdl) is installed."how to correct this issue by installing or by upgrading?
View 6 Replies
View Related
Feb 22, 2011
I've had a SSL wildcard certificate successfully in use, unless it had to be replaced because of its age. Now I've imported a new certificate, but unfortunately I'm unable to set it up in the SSRS Configuration Manager Console (Web Service URL / Report Manager URL), because "We were unable to create the certificate binding".Â
Â
Here is the Error Message:Â
Â
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 80070520
 ---> System.Runtime.InteropServices.COMException (0x80070520): A specified logon session does not exist. It may already have been terminated. (Exception from HRESULT: 0x80070520)
  --- End of inner exception stack trace ---
Â
I've also deleted the existing bond in the netsh console with "netsh>http delete sslcert ipport=0.0.0.0:443", but this still doesn't fix the issue.
View 3 Replies
View Related
Sep 18, 2015
I am new to MSBI, I am unable to create parameter using OLEDB ....
I am using Report Builder 3.0 and using this report tool I am executing below query, while I am running this query it display below error message.
Query: Â SELECT * FROM EMP Â WHERE EMPID =@EID
I need to pass @EID as parameter.
Error msg:Â (run the above query disp error msg)
Column or global variable *N not found. SQLSTATE:42703, SQLCODE:-206(Microsoft DB2 OLE DB Provider)
View 9 Replies
View Related
Aug 14, 2015
i have problem generating the SSRS Reports.Â
i have Report URL Â with 2 parameters-- @StartDate and @EndDate
when i hard coded the values and copy the URL in IE, Report gets generated
sample URL's:
[URL]
but when i use Parameters--Report is not getting generated.
[URL]
Below is the error;

Reporting Services Error
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
SQL Server Reporting Services
View 2 Replies
View Related
Feb 28, 2007
I am trying to access the Reporting Services Web Service, but i m not able to make it work. i tried with default credentials and network credentials
ReportingService service = new ReportingService();
service.Credentials = new System.Net.NetworkCredential("username", "password", "domain");
service.CreateSubscription(report, extSettings, description, eventType, matchData, parameters);
This is the exception i getThe current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Source Error:
Line 3382: [return: System.Xml.Serialization.XmlElementAttribute("SubscriptionID")]
Line 3383: public string CreateSubscription(string Report, ExtensionSettings ExtensionSettings, string Description, string EventType, string MatchData, ParameterValue[] Parameters) {
Line 3384: object[] results = this.Invoke("CreateSubscription", new object[] {
Line 3385: Report,
Line 3386: ExtensionSettings,
View 5 Replies
View Related
