Unable To Configure Reporting Service
Oct 12, 2007
Hi all, I tried to configure reporting services configuration by the following
step 1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and click Reporting Services Configuration.
when i did the above step, i received the following error..
No report servers were found on the specified machine.
Details: Invalid namespace
But i installed SQL server 2005 version.
Pls help me to solve this..
Thanks in advance..
Regards Nataraj.C
View 1 Replies
ADVERTISEMENT
Feb 20, 2008
Vista + SQL Server 2005
Reporting Service Configuration Tool: No Red Cross.
http://localhost/reportserver get this error:
HTTP Error 403.1 - Forbidden
You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run.
http://localhost/reports get this error:
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I googled but not found anything useful.
Thanks in advance!!!
View 8 Replies
View Related
Apr 29, 2008
Hi,
I have installed SQL Reporting Service on one server. Using the config tool, I am trying to setup the Reporting Database on a seperate SQL instance. This SQL instance is running on a Clustered SQL 2005 server.
The creation of the Database is sucessful. However when I give the Windows credentials to connect to this database on the same page, I always fail at the following task : Setting Connection Info for Reporting Server. The error message is :
"System.Runtime.InteropServices.COMException (0x800706B3)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObject.Get()
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetDatabaseConnection(String server, String database, ConfigurationCredentialsType credsType, String userName, String password)"
The Windows Account I am using has Full SQL Rights to the Clustered SQL Server. I have seen other posts on the forums about the 0x800706B3 error, but most of them are related to a problem with RPC.
The Reporting Services account is runing under 'Network Services'. I am not sure if this is causing the problem?
Thoughts anybody?
Thanks,
Mahmood
View 8 Replies
View Related
Jan 10, 2007
I am trying to configure a reporting server on my laptop at work. This laptop is running Vista and IIS 7. When I install reporting services, the option for "Install the default configuration" is disabled (greyed out) during setup. The install is successful, but then when I try to connect in the Reporting Services Configuration Manager, I get an unhandled exception ("A WMI error has occurred an no additional error information is available."). If I continue, this error continues to crop up as I attempt to configure the Report Server. When I attempt to configure the virtual directory, the configuration manager crashes. Then, when I navigate to the reportserver page, I get a page that states:
Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
Any ideas for a solution or workaround would be greatly appreciated.
Thanks,
Dave
View 1 Replies
View Related
May 16, 2008
I've created a SSIS package with a DataReaderDestination and a SSRS report that points to it.
I referenced these links during development and I have everything working as expected locally. **I changed the config files as stated on both my local machine and our server. My config matches the example exactly.
http://msdn.microsoft.com/en-us/library/ms345250.aspx
http://msdn.microsoft.com/en-us/library/ms159215.aspx
When I attempt to deploy my report project to the server I get this error message:
"An attempt has been made to use a data extension 'SSIS' that is not registered for this report server."
In the report manager data source properties page it reads:
"The data processing extension used for this report is not available. It has either been uninstalled, or it is not configured correctly."
In SQL Server Management Studio data source properties page SSIS is not a data source type option.
I've tried restarting both the Reporting Services and Integration Services on the server to no avail.
Any suggests? My problem is I can't get the SSIS to be recognized source on the server.
View 1 Replies
View Related
Jan 30, 2008
Hi there, I have a stupid question
When I want to configure reporting service in a computer it needs Windows SharePoint Service. But When I installed and configured it in my own PC it asked for database server location instead. Anybody have any idea about this?
View 1 Replies
View Related
Jan 25, 2008
When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace
What is the problem and how to solve it.
View 1 Replies
View Related
Jul 12, 2007
hi, I have problem initialize report server after upgrade to SP2.. It keep saying Could not locate entry i sysdatabases 'myDatabaseName'. while i'm sure my database existing. Here's the log
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3161.00</Product>
<Locale>en-US</Locale>
<TimeZone>Malay Peninsula Standard Time</TimeZone>
<Path>C:Program Files (x86)Microsoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServerService__07_12_2007_11_38_15.log</Path>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!resourceutilities!4!12/07/2007-11:38:15:: i INFO: Reporting Services starting SKU: Enterprise
ReportingServicesService!resourceutilities!4!12/07/2007-11:38:15:: i INFO: Evaluation copy: 0 days left
ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Catalog SQL Server Edition = Enterprise
ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Current DB Version C.0.8.40, Instance Version C.0.8.54.
ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Starting upgrade DB version from C.0.8.40 to C.0.8.54.
ReportingServicesService!library!8!12/07/2007-11:38:16:: e ERROR: Exception caught while starting service. Error: System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'CCGM_'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()
ReportingServicesService!library!8!12/07/2007-11:38:16:: e ERROR: Attempting to start service again...
View 6 Replies
View Related
Feb 28, 2007
I am trying to access the Reporting Services Web Service, but i m not able to make it work. i tried with default credentials and network credentials
ReportingService service = new ReportingService();
service.Credentials = new System.Net.NetworkCredential("username", "password", "domain");
service.CreateSubscription(report, extSettings, description, eventType, matchData, parameters);
This is the exception i getThe current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Source Error:
Line 3382: [return: System.Xml.Serialization.XmlElementAttribute("SubscriptionID")]
Line 3383: public string CreateSubscription(string Report, ExtensionSettings ExtensionSettings, string Description, string EventType, string MatchData, ParameterValue[] Parameters) {
Line 3384: object[] results = this.Invoke("CreateSubscription", new object[] {
Line 3385: Report,
Line 3386: ExtensionSettings,
View 5 Replies
View Related
Jul 4, 2007
Hi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
Sim
View 4 Replies
View Related
Dec 20, 2006
Hello,
I am using 'SQL Server 2005 Reporting Service' in my project. I am using sub-reports in many cases. Whenever I export such reports containing sub-reports to 'Excel' format which is the major client requirement in our project, the exported excel file shows 'Subreports within table/matrix cells are ignored.'
Can anybody tell me the solution for this? If not possible in reporting service then is there any other way to get data in excel format?
Thanks.
-Salil
View 1 Replies
View Related
Feb 22, 2007
I have installed SP2 on my SQL 2005 instance which also houses RS of course. Additionally I installed WSS3.0 without configuring it so it has the Object Model installed (should be enough?)
I am running WSS 3.0 on a seperate Server and have the Add-in installed on there.
Following the installation instructions I am going to Application Management to configure WSS, but there is no section called "Reporting Services". Looking on the Report Server, in the Configuration I see the following error under the SharePoint Integration Setting:
The report server cannot access settings in the SharePoint configuration database. Most likely, the Windows SharePoint Services object model is not installed or the Report Server Web Service and Windows service accounts do not have access to SharePoint databases. To configure service account access, use SharePoint Central Administration.
In my SharePoint Site I do see a SharePoint section under the "Site Settings" for managing shared schedules but I think the main issue is, that I don't see that section in Central Administration.
Any help is greatly appreciated.
View 3 Replies
View Related
May 9, 2008
Hi
I am unable to start the SSRS . I have tried to start the service through SSRS configuation and even in configuration manager also.
I am getting the following error . help me out
"The request failed or the service did not respond in a timely fashion.COnsult the event log or other applicable error logs for details"
i Have gone thourgh surface area configuration also.
Thanks
View 1 Replies
View Related
Apr 23, 2007
Hi all,
I need help regarding forms authentication in SSRS. I exactly followed the steps described in the article: http://blogs.msdn.com/bimusings/archive/2005/12/05/500195.aspx. However it doesn€™t seem to be working at my end. The only things that I didn€™t implement correctly are the two members of IExtension interface, here€™s the code for these two members;
public string LocalizedName
{
get { return "Naveed"; }
}
public void SetConfiguration ( string configuration )
{
//throw new Exception("The method or operation is not implemented.");
}
After performing all the steps mentioned in the article when I access http://<servername>/reports, it displays my login page alright, but when I submit the user credentials (whether right or wrong) it gives me:
€œAccess denied creating App_Data subdirectory€?
Description: For security reasons, the identity 'NAVEEDSIDDIQUIASPNET' (under which this web application is running), does not have permissions to create the App_Data subdirectory within the application root directory. ASP.NET stores the Microsoft SQL Express Database file used for services such as Membership and Profile in the App_Data subdirectory of your application.
Along with steps of how to grant the required permission. My question is why it is trying to create the new directory. Does it mean it is unable to find the database or does it mean something else? When I access http://<servername>/reportserver, it gives me:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Could not load type 'Vantage.CustomSecurityExtension.Logon'.
Could not load type 'Vantage.CustomSecurityExtension.Logon'.
Could not load type 'Vantage.CustomSecurityExtension.Logon'.
Could not load type 'Vantage.CustomSecurityExtension.Logon'.
Here €˜Logon€™ is the name of the code-behind class of my login page.
Please help me out in this problem.
Thanks and Regards,
Naveed
View 1 Replies
View Related
Oct 4, 2006
Dear All:
My reporting manager and reporting server were working fine in IIS. But when I booted the system one day, one error message came "Unexpected error" for the IIS. So I removed the IIS and reinstalled he same.
But after that, I tried to give virtual directories to reporting manager and reporting server sites. But it ain't working. Could you please help me?
My IIS 5.1
Reporting service 2005 Express with SQL Server Express
ASP.NET 2.0 Express.
Please help.
Thanks in Advance
Emmanuel Mathew
View 5 Replies
View Related
May 16, 2008
i have a list report
some values of this are blank or null
i want to avoid that spacing if it is null
like
name:jjj
lastname kkk
firstname
address uuuu
i want it should be
name jjj
lastname kkk
address uuuu
View 3 Replies
View Related
Apr 25, 2007
I am been trying to setup replication on my local Developer edition copy of SQL Server 2005 SP1, but I keep running to into this unable to connect to server error within MS SQL Server Management Studio environment. I tried various connection settings under the configuration manager and things like adding entries to my host file with no luck. Understand that this requires the server name but failing at providing this for the connection to start the wizard. I am missing something simple here?
Darryl
View 9 Replies
View Related
Jan 22, 2007
I recently renamed my server from tmpSrv to tfsSrv (names have been changed to protect the innocent). When I go to the Reporting Services Configuration Manager I have all greens except for the Web Service Identity field.
Trying to set that isn't working...the ASP.Net service account is NT AuthorityNetwork Service, and the application pools defined are using that Network Service account as well. When I hit the "Apply" button I get a message saying:
Setting Web Service Identity
There was an error setting the identity for the web service. The previously set identity will still be used.
I'm trying to install Team Foundation Server on the box, and when I run the tfrsconfig /verify tool I see that the Web Service Identity is not set at all.
I've been battling this for a couple of days now with no effect. I even broke down and gave "Everyone" administrative access on the server in an attempt to fix it.
Thanks for any help
View 6 Replies
View Related
May 25, 2006
Very Lost and very Frustrated
Hello all,
I am going to try to keep it short.
Been banging my head with this SQL 2005 Reporting System. My system configuration is as follow:
Windows 2000 server €“ (all services packs install)
Microsoft SQL Server Management Studio 9.00.1399.00
Microsoft Analysis Services Client Tools 2005.090.1399.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 built by: (_sqlbld)
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2800.1106
Microsoft .NET Framework 2.0.50727.42
Operating System 5.0.2195
Not sure you guys need all that information, but anyway, the problem is that when I run the Reporting Service Configuration I am unable to setup the €œWeb Service Identity€?
I am also receiving the following error:
ReportServicesConfigUI.WMIProvider.WMIProviderException: The account name is not valid. Specify an account in the form domainalias.
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
I am not sure.. but I think is something to do with IIS 5.
Help
Thanks all in advance.
View 27 Replies
View Related
May 30, 2013
1-We have sql server 2008 with 2 nodes with cluster(Active/Passive).
2-Due to performance problem we are going to separate the reports from database.
3-I want to create reporting server,as i am new for this pls let me know the step by step process to create reporting server.
4-Is it possible to create new instance for reporting in passive node and shear the cluster resources??
View 2 Replies
View Related
Mar 27, 2006
We are using the whole BI-package from Microsoft - from SQL, DTS-package,Raporting Service and Analyze Service.
It should be very helpful to be able to create a metadata databases where you could find all releations between different objects (tables,views,reports,cubes,DTS-package,Databases.
Just to get answer for: 'where is view xxx used', 'what are Report xxx depending upon'.
While everything exists in different SQL databases it should possible to do.
Has anyone any comments or the same needs ?
View 1 Replies
View Related
Mar 31, 2006
Hello,
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
Thank you very much,
Annie
View 5 Replies
View Related
Jun 12, 2015
We have 15-20 report server environments including Dev/SIT/UAT/PROD/DR etc. so instead of configuring it on each servers, we would like a script to use with parameters.
After installing the SSRS 2012 package on each server with given instance and service account, I would like to configure the SSRS through script instead on running the Configuration manager RSConfigTool.exe manually.
we already have created the database beforehand using the scripts provided by WMI. do we need db_owner permission on msdb and master database to configure SSRS?
View 2 Replies
View Related
Aug 22, 2007
I have a report created using MS SQL Server 2005 reporting services and deployed to the report server. I added a subscription for the report to be scheduled to run and emailed to someone on a regular basis. But now we want the report emailed ONLY when there is data returned. If no data is returned after the report runs then don't email it.
Does anyone know how to do that?
Thanks!
View 10 Replies
View Related
Apr 21, 2008
Hi,
I have a Windows 2008 server 64-bit SP1 and I have installed SQL 2005 SP2 Enterprise Edition 64-bit. My current version is 9.00.3042.00. I am trying to configure Reporting Services and I am having lots of trouble getting the Application Pools to work properly. I have followed the Microsoft Technet paper 839480 "How to Install and Configure Reporting Services on Windows Server 2008". In the "Configure Reporting Services" part, I have successfully configured everything (all arrows are green) and have the following setup:
Report Server Virtual dir: ReportServer Default Web Site
Report Manager Virtual dir: Reports Defualt Web Site
Windows Service Identity: ReportServer with a service acct login
Web Service Identity:
Report Server: ReportServer,
Report Manager: DefaultAppPool (I get an error when I try to configure it to anything else: ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
The one thing I notice in the SQL Server configuration manager is that there is a red dot next to the SQL Reporting Services services even though the green arrow is there to show it is running.
When I look in IIS7, I see the application pools Reports and ReportServer and they are both in Integrated mode. When I try to go to http://localhost/reportserver, it gives an error. It will work if I change both application pools to classic. But then when I try to go to http://localhost/reports, I get an error:
"REQUEST IS NOT AVAILABLE IN THIS CONTEXT".
I have read up on IIS7 and it says that:
"This error is due to a design change in the IIS7 Integrated pipeline that makes the request context unavailable in Application_Start event. When using the Classic mode (the only mode when running on previous versions of IIS), the request context used to be available, even though the Application_Start event has always been intended as a global and request-agnostic event in the application lifetime."
So, how do I configure these application pools to work using IIS7 with SQL 2005 Reporting Services on a Windows 2008 server? I have tried all kinds of different things based on what I am reading on the net and nothing is working. Anybody have any suggestions?
Thanks!
Isabelle
View 3 Replies
View Related
May 14, 2008
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
View 4 Replies
View Related
May 1, 2008
I am unable to start SQL service on my system after i rebooted it
following is the message that i get
SQL Service on Local Computer started and then stopped. Some service stop automatically if they have no work to do
following is the corresponding entry in event viewer
TDSSNIClient initialization failed with error 0x7e, status code 0x60.
View 8 Replies
View Related
Jun 18, 2004
Hi,
I was facing problems applying SP3 for Analysis Services so I removed it and then re-installed.
I then tried to apply SP3 but I am still getting v8.00.382 for AS (which represents SP1). I have tried a couple of things but it seems that SP3 is just not getting applied (for Analysis Services).
Anyone any clues? Thanks.
View 6 Replies
View Related
Jun 18, 2004
Hi,
Shortly after I run the setup file of AS SP3, I get a Dialog box with the following error message:
"An error occurred during the move data process: -145"
Can someone please guide what this is and how this can be solved.
Many many thanks in advance.
View 3 Replies
View Related
Jan 12, 2004
Message logged in the SQL Server is
Failed to report the current event. Operating
system error = 31(A device attached to the system is not functioning.).
The OS has been Shutdown and Restarted again but I am not able to start the SQL Server thereafter.
Kindly Suggest
View 8 Replies
View Related
Apr 28, 2004
Hi Gurus,
I have installed MS analysis service(OLAP) on my lap top
my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service
I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group
I tried to install the service pack 3 from Microsoft
Could you pleae guide me to start this serivice
Thanks,
View 2 Replies
View Related
Sep 7, 2006
Hi all
When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..
Pls suggest..
Thanks in advance
View 12 Replies
View Related
Jan 23, 2008
Hi,
I was unable to start SQL Browser Services (time out) after installing SQL Server 2005 Analysis Services. The configuration of the server is
1. Win 2003 R2
2. Sql Server 2000 SP4
3. Sql Server 2005
Anybody has encountered this before? Any advice will be good.
Thanks!!
View 1 Replies
View Related
