Unable To Connec To SQLSERVER Server From Client

Jul 23, 2005

H friends

I have a strange problem.
i am trying to connect to my sqlserver from client machine to server
machine
But i am not able to connect to the server from the client machine.
The strange thing is that i am able to connect through Named Pipes but
not with TCP/IP and i get error SQL Server doesnot exit or access
denied.

Could you please help me out...


Anil P

View 2 Replies


ADVERTISEMENT

Client Unable To Establish Connection Encryption Not Supported On SQL Server. (Microsoft SQL Native Client)

May 2, 2006

On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS

Client unable to establish connection
Encryption not supported on SQL Server. (Microsoft SQL Native Client)

I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?

View 2 Replies View Related

Connec To MSSQL Server

Mar 5, 2008

Hi, I am using VS2008 without SQL Server Express Edition.I am trying connect to MSSQL Server 2005 at localhost. How could I connect success using AspNetSqlProvider ? How to write connectionString in web.config ?  Regards. 

View 2 Replies View Related

Unable To Connect To SQL Server On Client With Wi

Nov 27, 2007

Hi,

I have a Visual C# WinForms app which I am accessing a SQL Server 2005 database with. On the Server, I have allowed remote connections (TCP and named pipes) and enable SQL Browser as per instructions on MSDN. The app works fine on the development machine.

Server name is <machine name>SQLEXPRESS, connecting with Windows Authentication.
Server log states that it is listening on [ 'any' <ipv4> 3153].
Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].

On the client (local network), when trying to open the database I get this error still:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Also on the client, I can go into the ODBC Data Source Administation, and connect to the SQL Server Database that way successfully.

What further steps can I take to allow the client to access the SQL Server?

Andrew

View 1 Replies View Related

Unable To Connect To SQL Server On Client With WinForms App

Nov 27, 2007

Hi,

I have a Visual C# WinForms app which I am accessing a SQL Server 2005 database with. On the Server, I have allowed remote connections (TCP and named pipes) and enable SQL Browser as per instructions on MSDN. The app works fine on the development machine.

Server name is <machine name>SQLEXPRESS, connecting with Windows Authentication.
Server log states that it is listening on [ 'any' <ipv4> 3153].
Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].

On the client (local network), when trying to open the database I get this error still:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Also on the client, I can go into the ODBC Data Source Administation, and connect to the SQL Server Database that way successfully.

What further steps can I take to allow the client to access the SQL Server?

Andrew

View 1 Replies View Related

Unable To Connect To SQL Server On Client With WinForms App

Nov 27, 2007

Hi,

I have a Visual C# WinForms app which I am accessing a SQL Server 2005 database with.

On the Server, I have allowed remote connections (TCP and named pipes) and enable SQL Browser as per instructions on MSDN. The app works fine on the development machine.

Server name is SQLEXPRESS, connecting with Windows Authentication.
Server log states that it is listening on [ 'any' 3153].
Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].

On the client (local network), when trying to open the database I get this error still:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Also on the client, I can go into the ODBC Data Source Administation, and connect to the SQL Server Database that way successfully.

What further steps can I take to allow the client to access the SQL Server?

Andrew

View 1 Replies View Related

Unable To See Data From Oracle Client Through SQL Link Server

Feb 5, 2007

Hello,

I was hoping someone had this problem and has a solution... :)

Some background info:

SQL 2005 Enterprise x64

Windows 2003 R2 x64 Enterprise (clustered)

Oracle client 10.2.0.3 (latest as of 2/2/07)

The issue I'm having is I have a link server setup within SQL 2005 connecting to a Oracle 8 database server. The Oracle client I'm using is 10.2.0.3 (latest version from Oracle). From the SQL 2005 server I'm able to query the remote oracle server through the link server I had setup if I query the table directly. If I perform a query to a view on the Oracle server I'm able to see the colum names, but not the data. This only happens when I'm using the Oracle client, if I use the MS client for Oracle it works fine OR if I use SQL Plus.

Now, you're probally asking, why not just use MS's driver... Well, I would If I could, but Microsoft hasn't provided a 64 bit driver for Oracle which I need to create the link server in SQL.

Any help would be appreciated.

View 4 Replies View Related

SQL Security :: Unable To Connect With Client Database Server Using VPN?

Jun 9, 2015

We are unable to connect with Client SQL database server using VPN connection, even we are able connect with their intranet site.

We tried to connect using IP address, but no success. After that tried to ping that server with server name and IP address using command prompt, but got request time out error.

View 5 Replies View Related

Sql Native Client Or Sqlserver Client

Mar 3, 2007

Hi,

While using Sql Native Client ,VB Application giving error

"Transcation Cannot Start because more than one ODBC connection is in use"

But when useing SqlServer client then work perfectly ok.

Please guide where to use Sql Native Client.

Thanks

Rizwan



View 1 Replies View Related

Unable To Install Native Client Components In SQL Server 2005 Enterprise Evaluation Version

Dec 14, 2007

Hi all,

I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en

Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link

http://channel9.msdn.com/ShowPost.aspx?PostID=142941


First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.

Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.

View 4 Replies View Related

Help Needed In Accessing A Sqlserver 2005 Express Edition From Client Systems To The Server 2003 R2 Servermachine.

Dec 4, 2007



hi guys,
i am having a truble in accesing the server 2005 express edition from my client systems in server 2003 domain network. i get server not accessible. whereas my domain is working perfectly. i really tried alot and i have enable tcpip and named pipes and i am still getting errors while accessing. i have also created user reights for the domain users to access sql server. still i couldn't able to access it.

please guide me to over come this issue. I'm dying.My project is similar to SAP concept project and i am doing it in a production industry.so each department as to access the data from the server to update their daily production and activity.

thnks in advance.

Viswa

View 1 Replies View Related

Connec To Sql Express

Apr 12, 2007

at work, I'm trying to use Native client under ODBC to connect to another pc have the SQl Expess server, but never get connect. the message said the sql express may not allow remote connect.

I run a test, install sql express at home and install native client on the second pc and get connect easily.

So what do I miss here. Please help. thanks

View 3 Replies View Related

Bcp Without Sqlserver Client

Sep 14, 2004

Is there any way to make bcp executable work on a pc without having
sqlserver client on that system.does copying any dll's and executables help
thanks a lot for help.
i

View 1 Replies View Related

ODBC And SQLServer : Does I Need The Client Installed On ?

Jul 20, 2005

Hi,Does I need to install the mssql client binaries to use ODBC toconnect to a mssql database ?TYIArjp

View 2 Replies View Related

MS SQLServer 2005 - Client Tools

Nov 27, 2007

Hi there,
When I try and install the client tools on my SQLServer 2005 SP2 installation I get the following message:


Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: The Transaction Manager is not available. (Exception from HRESULT: 0x8004D01


I have tried to uninstall and reinstall the Client Tools, but I keep on getting the same message.

Any suggestions?

Regards

Dawid

View 5 Replies View Related

Client Unable To Establish Connection

Apr 7, 2000

Here are the error messages:
Enterprise Manager:
A connection could not be established to SERVERNAME - Client unable
to establish connection ConnectionOpen (CreateFile())

Query Analyzer:
Unable to connect to server ServerName
Server Msg 67, Level 16, State 1
[Microsoft][ODBC SQL Server Driver]Client unable to establish connection


I can't register any other new servers, even ones in my workgroup. I'm connecting using named pipes, but have also tried using TCP/IP setting it up using Client Network Utility.

When i log on to another machine using my network login - I can connect.

There have been no problems connecting in the past and I haven't changed anything on my machine - any ideas???

View 1 Replies View Related

Client Unable To Establish Connection

Oct 18, 2000

Hi Guys.

We have a clustered server. When i create DTS packages in the secondary server I can get all the connection. But when i create DTS package that has connection to other servers. I am getting the follwing error. So my jobs that runs the DTS packages are failing.

Error Source: Microsoft OLE DB Provider for sql server

Error Description: Client Unable to establish connection.
Connectionopen(createfile())

I deleted all the entries in the Client network utility and recreated with ip addresses and TCP/IP protocol.

Added all the ip addresses to Lmhosts and host files.

Check the Server Network Utility.

I dont have a clue now.

Anyhelp are well appreciated.

-Thanks
-MAK

View 4 Replies View Related

Unable To Access MSSQLSERVER From Client

Dec 20, 2005

Hi,

I have SQL Server 2005 installed and functioning (it does everything I've asked it to do locally). I also have the Express and Standard Editions installed on a computer running WinXPPro SP2 with all the WinUpdates applied. I also have VS2005 installed on this computer. I've done some development work on this computer, using VS2005 to create a SQLDB, connect to it, add data, etc. This is all okay.

The problem is I cannot connect to the SQL Server from the client computer. I installed the client tools on this XP Pro box along with all the WinUpdates. Here's what I can do...

I can ping the SQL Server by name (the name gets resolved).
I can copy files between the two computers using Explorer.
I enabled "Allow remote connections to this server" in the Server Properties / Connections page.
I did not change the default port of 1433.
The TCP/IP protocal is enabled in the Configuration Manager.
The Surface Area has been configured to allow local and remote connections using TCP/IP and named pipes.
SQLBrowser surface is running as is the MSSQLSERVER service.

So what's going on? I am new to SQL Server to it may be something very simple / obvious.

Thanks for your help,
Scott

 

View 4 Replies View Related

MSDE And Client Tools From SQLServer Eval

Nov 19, 2003

Ok, a while back, probably a year or so I started moving to MSDE. At the time a read posts on the Web that said you could use the client tools from the SQL Server Eval to manage MSDE. Great! I thought.

But more recently I get the impression that using those tools in not allowed. Can someone give me a diffinative answer.

I really want to stick with MSDE and am having a hard time convincing the boss to shell out $9,000+ for SQL Server on my dual processor web server. But I need DTS, Job Scheduling, etc...

Now my boss has wind of MySQL and knows that it's CHEAP.

If I can legally use the client tools with MSDE than I'm fine, if not I dread going to MySQL.

Your Advice is appreciated.

View 6 Replies View Related

MSSQL2000 Client Unable To Create New Table

Dec 18, 2005

HELP!
I'm new to SQL Server and I'm sure this is a simple problem.
But I can't seem to solve it.
Here's the problem:
My website & MS SQL 2000 Server are being hosted by Networksolutions.
Thru the Client Enterprise Manager I am Unable to create a New Table.
This is the error message I get:
" [MS Design Tools]-ODBC error: [Microsoft] [ODBC SQL SERVER DRIVER] [SQL SERVER] SELECT permission denied on object 'sysobjects', database 'namedb', owner'db' " :confused:

View 2 Replies View Related

Error = [Microsoft][SQL Native Client]Unable To Op

May 2, 2008

As long as the output file is written to the local client, it completes successfully. But after changing the UNC path to another server with or without fully qualified names it is unable to open BCP host data-file. (sample shown below)
-----------------------------------------------------------------
DECLARE @FileNamevarchar(2000),
@bcpCommandvarchar(2000)

SET @FileName =REPLACE('\stladminy_drive ransfer
maffrandauthors_'+CONVERT(char(8),GETDATE(),1)+'.txt','/','-')

SET @bcpCommand ='bcp "SELECT * FROM FKIAcctReceivable.dbo.PurchaseOrder" queryout "'
SET @bcpCommand =@bcpCommand + @FileName + '" -T -c'

EXEC master..xp_cmdshell @bcpCommand

---------------------------------------------------
xp_cmdshell has been enabled and the user has sysadmin rights.

Anybody have the same problem and willing to help?

View 3 Replies View Related

Unable To Load Client Print Control

Apr 4, 2006

When you display a SQL Reporting Services report to the screen in the header there is a Printer Icon displayed. When we click this icon we get an error message "Unable to load client print control ".

Does anyone know what we need to load or what we need to do to resolve this so that we can print the report directly to teh printer, rather than having ot prinnt the web page, which also prints all the Web headre information

View 93 Replies View Related

The Client Was Unable To Reuse A Session With SPID XX

May 11, 2007

Hello,



We have a recurring problem with one of our MS SQL Servers (MS SQL Server 2005 SP 1).

The SQL Server serves as a database server for a Web application with approximately 1500 users, the server is dedicated for the DataBase server.



The scenario is that the database servers cpu peaks at 100% and stays there until restart of the SQL Server service.



The error message from the applicatoion log:



Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 18056



The client was unable to reuse a session with SPID 94, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.



SPID varies.



Anybody that knows anything why this error occurs?



Regards

John

View 25 Replies View Related

Unable To Connect To Sqlserver

Dec 31, 2007

unable to connect to sqlserver, server not found error ... i typed the right username and password,,, still i am not able to connect to sqlserver ,,also i tried with new sqlserver registration still i am not able to connect to sqlserver

error :

specified sqlserver not found connection connect()

please help me out

View 2 Replies View Related

SQLBrowser: Service Was Unable To Process A Client Request.

May 21, 2007

Hi, I have a Active/Active SQL 2005 Cluster, and I've seen this recurring message in the Event Log.


Source: SQLBrowser
Category: None
Type: Error
User: N/A
EventID: 8
Message: The SQLBrowser service was unable to process a client request.


I don't know if it's something to worry about, since I haven't had anyone call in an issue.


I have set the default and named instances to specific ports, no dynamic ports here.


There's nothing in the instances' error logs.

View 4 Replies View Related

Unable To Connect To SQLEXPRESS From A Client In A Workgroup (Error 40)

Jul 11, 2007

Hi to everyone!

Here is my problem: I have SQLEXPRESS running with Windows Authentication on a "server" PC named "ASUS1", and I need to connect from a "client" PC named "Presario1", user "Mauro", connected through a peer network (I use a cross-over cable); both PCs belongs to the same workgroup named "RMT-WORK", and they can see each others shared folders without problems.

I have installed the connectivity components + Management Studio Express on Presario1, and enabled named pipes and TCP/IP protocols; then I've got SQL Browser running. I have also added the Login "Guest" on ASUS1SQLEXPRESS.

When I start Management Studio Express on Presario1 and browse for servers I can select "ASUS1" as database engine but when I try to connect I receive "Error 40: could not open a connection to SQL Server" (same result using SQLCMD); I have tried to add on ASUS1SQLEXPRESS a user "Presario1Mauro" with "CREATE LOGIN [Presario1Mauro] FROM WINDOWS" but I receive a "Windows user not found" error...

Can anyone help me?

View 6 Replies View Related

Unable To Load Client Print Control ERROR

Mar 12, 2007

Only one of our users is getting this error

unable to load client print control

She was able to print fine before, any idea why this is happening.

View 1 Replies View Related

Updates To SQLServer 2000 DLL's When 2005 Client Tools Installed

Jan 12, 2006

Hi,

I have many sql 2000 DTS packages that I support from my development workstation  running v2000 sp4. Packages are altered on the development machine and then go through a normal release mechanisms to production via testing servers etc.

I have recently installed the client tools for SQL Server 2005 on my desktop to evaluate the product.  The 2005 DB instance is running on a seperate server.

So, I have dev edition of sql 2000 and 2005 client tools (including BI Dev studio etc) on my workstation.

I have recently had to make changes to a 2000 DTS package and used my 2000 enterprise manager to do so. No Problem- saved and tested fine on my workstation. 

But when I try and release it to another server, or open the package using enterprise manager from another machine that does not have sql 2005 installed - I get an error message 'Unspecified error'.  This I've seen before when trying to open packages created in v2000 , using v7 or where the service packs are different between machines.

Digging around my workstation and comparing some of the DLLs I know to be required to distribute DTS  packages (from RDIST.txt) it seems that some of the SQL 2000 dll files have been updated by my 2005 installation. 

E.g

DTSFFILE.DLL on my machine is 2000.85.1054.0 whilst on any 'clean' 2000 machine is at version v2000.80.760.0

Surely it cant be right that SQL 2005 has newer versions of components for SQL 2000 than is available with the latest SP for the actual product! Especially considering that the installation of 2005 does not even allow you to edit 2000 DTS packages through the management studio without a 'special' download' of the feature pack,(whihc by the way does not work very well either)

So am I to conclude that you can not run side by side installations of SQL 2000 and 2005 on a single machine and expect 2000 to run as it did previously !!!

View 2 Replies View Related

Problem In Accessing The Database(Sqlserver 2005) From Client Machine

Apr 25, 2007

Hi



We have upgraded sql server 2000 to sqlserver 2005 on the development server.

To access the database server, we installed the sql server management studio on the client PC with Admin Account. The .Net framework and sqlserver management studio were installed and I am able to access the database from the client PC using Admin Login. Then we logged off and tried to login as user account on the client PC. From the user account login we are unable to open the sql server management studio. The error is as follows
€śThe proper type library could not be found in system registry€?

The client PC configuration : windows 2000 Professional ( sp4)

Regards,
K.S.Subba Rao

View 1 Replies View Related

Installting Sqlserver 2005 On The Client Machine For Windows Application

Oct 24, 2006

Hi
I developed a windows application in Visual studio 2005 and the database is sqlexpress.
I wanted my application to run on another system.For that i have installed sqlexpress 2005 on that machine.But that machine doesn't show me any enterprise manager or query manager for sqlserver.
Is there any solution for this.

Thanks

View 3 Replies View Related

Unable To Start The MS SQLServer Service

Jan 12, 2004

Message logged in the SQL Server is

Failed to report the current event. Operating
system error = 31(A device attached to the system is not functioning.).

The OS has been Shutdown and Restarted again but I am not able to start the SQL Server thereafter.

Kindly Suggest

View 8 Replies View Related

Unable To Create A Step In A SQLServer Job

Jul 23, 2005

I am running SQLServer 2000 SP3 with MDAC 2.8.On instances created via MSDE, I am unable to create the first step ina job. Instances created with SQLServer 2000, this problem does notoccur.The message I am receiving on the instances created with MSDE, themessage I get immediately upon pressing the Add button to define a stepis "Error 170: Line 1: Incorrect syntax near ''"Any help would would be greatly appreciated.Wardell Castles

View 4 Replies View Related

SQL 2012 :: (Native Client 10.0) Unable To Open BCP Host Datafile

Aug 7, 2015

I have a bcp command that works in 2008 standard edition but not in sql 2012 developer edition.

I'm using the SA account in both cases to a local sql server.

Results are attached.

set nocount on

SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
go
select @@version
go
select @@MICROSOFTVERSION
go
exec sp_configure 'xp_cmdshell'

[Code] ......

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved