Hello,
I've a simple 2 nodes clusters active/passive with SQL2005SP2, using a named instance.
I can access from a remote workstation using <servername>,Port# but not <servername><instance>
Any idea why?
SQLBrowser is running and protocol is enable.
If starting sqlbrowser.exe -c I see the request but there don't seem to be any response.
Thank
ML
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
We have SQL Server 008 R2 failover clustered instance.
Installation and everthing went smooth. But I'm getting a weired error
Unable to connect to SQL Server clustered instance from one of the nodes
When SQL Server Resources are on sql1:
Connect from SSMS from sql2--> NOT Able to connect to SQL instance (A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2))
Connect from SSMS from sql1-->Working fine
When SQL Server Resources are on sql2:
Connect from SSMS from sql1-->Working fine
Connect from SSMS from sql2-->Working fine
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
Problem: I upgraded a SQL Server Express instance to SQL Server Enterprise, but I'm unable to connect to the SQL server from any remote machine. Only local connections work -- and I've verified that Remote Connections are allowed in the SQL Surface Confg. utility.
Scenario: Server1 has an SQL Enterprise edition installed as a default installation. SharePoint Server 2007 was installed later, and during that install a SQL Express edition instance was installed which is part of the standard SharePoint install. That Express instance contains all the SharePoint content databases.
So Server1 has SQL instances:
Server1 <default install running Enterprise>
Server1OFFICESERVER <previously running SQL Express, now upgraded to Enterprise>
After upgrading Server1OFFICESERVER to Enterprise, everything seemed to work fine (i.e. SharePoint works fine). However when I try to connect remotely to Server1OFFICESERVER I can't. I've verified through the SQL Surface configuration tool that remote connections are allowed. I've rebooted the server as well. I've tried connecting remotely using various PCs and various applications (e.g. SQL Server Mgmt Studio, Visual Studio, etc.).
Any other ideas to try?
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
OS: Windows 2003 Server Enterprise Edition
SQL Server: SQL Server 2005 Enterprise Edition (2 instances)
SQL Server : SQL Server 2000 Enterprise Edition ( 1 instance)
Problem:
2nd instance of sql server 2005 installed and service pack 2 applied
when using SS Mangement Studio I get the error:
Cannot connect to <ServerName>MSSQL2K5_2.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
Error Number: 10060
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Open MyComputer
Services & Applicaitons | Services
SQL SERVER (<SERVER NAME> MSSQL2K5) STARTED
SQL SERVER (<SERVER NAME> MSSQL2K5_2) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5_2) NOT STARTED
Application Event Log
SQLServerAgent could not be started (reason: Unable to connect to server 'BLUESTONEMSSQL2K5_2'; SQLServerAgent cannot start).
SOURCE: MSSQL%MSSQL2K5_2
Server is listening on [ 'any' <ipv4> 2777].
DAC is listening on [ 'any' <ipv4> 2778]
<SQL ERROR LOG> AND <APPLICATION EVENT LOG ENTRY>
The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service.
Error: 0x54b, state: 3.
Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos.
This is an informational message.
Further action is only required if Kerberos authentication is required by authentication policies.
CONFIGUATION MANGER
Alias is configured with correct port. (2777)
Protocol TCP/IP
TITLE: Connect to Server
------------------------------
Cannot connect to sia09-cxdb01cxdb01.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have installed SQL Server 2005 on two boxes and installed client tools only on my local machine.
I cannot connect to either machine.
I also have the "Error 26 problem - does not allow remote connection etc."
Of my two remote servers, one is virtual the other is not.
I cannot establish a connection through the "Microsoft SQL Server Management Studio" tool on my local machine using:
Severname: ServerNameInstanceName
Authentication: Either Windows or SQL Server
Eveything is enabled (TCPIP, Name Pipes), no firewall
SqlBrowser is running
I have SQL Server 2000 also installed on the same server machines and I am able to connect to this.
I tried using IP addresses and port numbers as follows (NB ServerName implies alias or ip address) and portnumbers I have tried are 1433 and 1766:
ServerName,portnumber
ServerNameInstanceName,portnumber
It either connects to the 2000 or gets the error 26 problem.
Any help would be appreciated.
Dear All,
We had changed the IP address of our SQL Database server(include the Report Server).
After we finished this, we restarted the server, but now, we cannot connect to the Report instance, database instance have no problem.
How to fix it?
Thank you.
Jeffers
I upgraded my 6.5 server to 7.0 two days ago running into small problems with the database upgrade wizard. I had some small problems with security which took me some time but was not that difficult once I figured it out. I then proceeded to switch back to 6.5 mode to transfer all the data that had been done that day to my development machine so I could then import it to the SQL 7.0 version. When I was done with the transfer I switched back successfully, started the server successfully, but I was unable to connect. I get the error "Connection could not be established...", so after several attempts to connect and shuting the server down I now am at a loss. The server runs fine in 6.5 mode but it will not connect in 7.0?? Tonight I am going to try to reinstall SP1, if that does not work I am going to try to reinstall SQL 7.0. Any suggestions???
View 2 Replies View RelatedOn a fresh installation of SQL Server 6.5, I have
opened the EM and registered the server but am unable
to connect. I get the error of 'A connection could not
be established to [ServerName]- [DB-Library] Unable
to connect: SQL Server is unavailable or does not exist.
General Network Error. Check your documentation.'
I've tried connecting with all different DB-Lib settings
to no avail. Ultimately, I want to use TCP/IP. I am,
however, able to connect to other SQL Server boxes from
this EM, just not the local server. I am able to stop
and start the services from Control Panel and from SQL
Service Manager.
Since I haven't been able to log into the local SQL Server,
I've registered the server in EM to log in with sa and a
blank password. I've already completely uninstalled SQL
and reinstalled it to see if that would help. It didn't.
Does anyone have any idea what the problem could be?
Thank you!
Toni
Hi,
I am running SQL 2000 on Windows 2000 Server. The clients are running different OS ranging from Win 98/NT/2000. Although i am able to connect to the local host, but whenever i try to connect over the network the following error pops up :
unable to connect to server <server name>
Server : Msg 11, Level 16, State 1
[Microsoft][ODBC SQL Server Driver][TCP/IP Socket]General network error. Check your network documentation.
I checked up the event long on the server and found the following entry:
Event Type: Warning
Event Source: MSSQL$NETSDK
Event Category: (8)
Event ID: 19011
Date: 1/20/2003
Time: 2:12:32 PM
User: N/A
Computer: <computer name>
Description:
The description for Event ID ( 19011 ) in Source ( MSSQL$NETSDK ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event:
(SpnRegister) : Error 1355.
May i further clarify that this error started today n till last week end (saturday, i am
stationed in India) there was no problem and the users were able to connect to the server
without any problem. My network engineer feels that its an sql problem and has nothing to do with network related issues.
i would appreciate if anybody could help me out. thanking in advance
- Paramesh
recently i made my PC dual boot by installing windows 2000 advanced server. It already had win2000 profesional installed on it. since then i have been unable to connect to sql server running on some other server(called CONTROLS) on the LAN. I am able to access the CONTROLS server thru 'my networkplaces' and able to see all its hsared directories and access htem. but when i open Enterprise manager i cannot connect to CONTROLS.
Please help me . i have already wasted 2 days over it.
I am unable to connect to SQL Server using isql_w or enterprise manager. The ODBC settings register successfull and the services show as started. I have tried starting SQL server in single-user mode with minimum config to see if memory is a problem but still cannot connect. The error logs show SQL as having started successfully with no errors. Has anyone got any ideas?
View 5 Replies View RelatedFrom my Win98SE box with MDAC 2.6sp1, I can't connect to SQL (win2k, sql2k).
I've tried everything I know but nothing works.
I always get the following error:
Unable to connect to server 192.168.1.2
ODBC: Msg 0, Level 16, State 1
[Microsoft][ODBC Sql Server Driver] Timeout Expired
some additional info...
- both computers are in a workgroup, not in a domain.
- this is a home network and they're connected via a Linksys cable modem router
- another box on this same lan can connect to sql just fine, although it's
running win2k.
- all boxes have identical DSN, Subnet...settings
- I also installed Jet4.0sp1 just in case, but that didn't help either
- I'm primarily trying to connect via TCP, although I have tried Named Pipes
as well
- i can ping both boxes from each other just fine
- odbc ping fails
MDAC has worked beautifully for me for the last several years. Did MS
change something recently...or is there another problem?
Thanks, Andre
Hi,
I encounter (suddenly) the following error:
[ODBC SQL-Server Driver][Shared Memory] Unknown connection
by connecting either with the query analyzer or enterprise manager.
No connection possible anymore.
My configuration is:
Windows 2003 Server with
SQL Server 2000 SP3a Enterprise Edition with standard network configuration
One MSDE is still running on same machine and can connect.
I have checked with Compchecker, but no mismatches.
Any ideas ? It all sounds weired !
dajm
:(
Hello. I am very new to SQL Server. I've tried to look through other posts on the forum but did not find the solution I needed. Please help.
I have SQL Server running on Machine1 which I am able to connect to. What I want to do is connect to this server through a Machine2 that is on my network.
Both Machines run on WindowXP Professional
On the server of Machine1, I have:
1. Under the security tab, I have created a New Login using SQL Server Authentication (general tab), checked all server roles (server roles tab) and checked to permit all databases (in the database access tab)
2. On the server, went to properties -> security tab and allowed for SQL Server and Windows authentication
On Machine2 when I try to register the server of Machine1 through the Register SQL Server Wizard, I am able to see the server. However, when I use the newly created Login Name and password (from step 1 of above). I get a Login Failed for user message. When I try to connect to the server through Query Analyzer I also get an unable to connect to server message (Server: Msg 18456, Level 16, State1)
What else do I need to configure to make it work?
Thank you!
If you place an image of your server on a rebuilt server, rename it andchange the SID. You get an error message “UNABLE TO CONNECT” when youuse the SQL Query analyzer on a desktop computer to connect to theserver (hosting the image). If you add the server (hosting the image)to the Windows2000 server domain/active server and restart the server(hosting the image), you get the following error message: "YOUR SQLSERVER INSTALLATION IS EITHER CORRUPT OR HAS BEEN TAMPERED WITH (UNKNOWNPACKAGE ID). PLEASE RERUN SETUP."Wouldn't you think changing the name, the sid and adding it to a domainwould be enough to access it. I even created a new ODBC connection.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View Relatedi have three computers with three differnent running systems. about three days ago we were experiencing trouble getting into the game rooms at pogo.com. we thought it would be trouble with java since it affected all three computers. on the computer i am on now i have uninstalled and reinstalled java numerous times to no avail. I am at my wits end trying to fix this. does anyone have any ideas.
View 1 Replies View RelatedHi there,
There is a SQL instance (sql2005) and I am trying to add a new distribution. Replication wazard says:
SQL
Server is unable to connect to server 'SERVER1'. (New Publication
Wizard)SQL
Server is unable to connect to server 'SERVER1'. (New Publication
Wizard)
SQL Server replication
requires the actual server name to make a connection to the server.
Connections through a server alias, IP address, or any other alternate
name are not supported. Specify the actual server name, 'SERVER1'. (Replication.Utilities)
There is the only local instance of the server on local computer and 'SERVER1' is actual name.
What is wrong?
Thank yuu
Hi:
I have a SQL 2005 instance (standard edition with sp2 on windows 2003 server) located on different domain.
I can connect to it by using sa only. I need to use SQL login.
I created another user called 'test' and granted with sysadmin server role, but I got following error:
Login failed for user 'test'. (Microsoft SQL Server, Error: 18456)
I searched on the internet two days with no luck.
Any idea?
Thanks in advance.
Theresa
I installed SQL Server Express and SQL Server manager, then tried to start manager. SQL Service is running, but SQL Manager attempt to connect to SQL Server instance times-out even though I correctly identify instance as SQLEXPRESS? Everything seems to be normal - both SQL Server and Manager are on a single Windows XP home machine. Any suggestions. Thanks
View 16 Replies View RelatedI had a big problem on connecting sqlserver remotely from other machines on the network .....
From any computer in the network i wanna to register the instance of the sqlserver from the enterprise manager ..... the server instance doesn't appear within the available sqlserver list (the servername which equal to my machine is the only one that appear) ..... when i manualy write the servernamealias manually and i choose the connection type and then i write sqlserver username and password and then finish he give a message to me that access denied or sql server doesn't exist ... !!
by the way from the local machine i registered the local instance of sqlserver successfully and successfully i access the Databases .....
To be noted:
I previously uninstalled this alias and i then i reinstalled it again with the same name and i attached the previously exists Databes.
in the same time i installed on the same machine sqlserver 2005 connectivity clients not the server itself.
I recently installed SQL Server and Visual Studio. When I went into SQL Server, I could only connect to a SQL EXPRESS Database engine. I need to access the full Database. I tried disconnecting it, uninstalling/reinstalling. Now I cant connect to the SQL EXPRESS DB Object. There are no SQL Server services running.
Please help.
Thanks
hi,
im making a log in using the asp.net web site admin tool the probably
is when click n the security tab it says it cannt connect to the
aspnetsqlprovider. thanksdomal
The error occurs when I try to configure SQL server express. Please help. An error has occured while establishing a connection to the server. When connectiong to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (Provider: Named Pipes Provider, error: 40-Could not open a connection to SQL Server)
-sam
Hello all,I try to configure the website by using the built in tool of vs2005. When i click the button from Website -> ASP .NET Configuration.when the main page is displayed, i clicked the security, the error shows like:---------------------------------------- There is a problem with your selected data store. This can be caused by an
invalid server name or credentials, or by insufficient permission. It can also
be caused by the role manager feature not being enabled. Click the button below
to be redirected to a page where you can choose a new data store. The following message may
help in diagnosing the problem: Unable to connect to SQL Server database.---------------------------------------How to enable connection to sql server? Thanks
I have a problem that unble to connect the SQL Server2005 on Vista OS. After searching solution around but still not able to find the solution for me problem.
The Error was Error 26,
provider:SQL network interfaces, error:26 - error locating server/instance specified
Is any1 facing the problem on this? Any solution for this case?
TQ
To All Members,When I create a new project and try to use the ASP.Net web application administration :security tab, I get the following :There
is a problem with your selected data store. This can be caused by an
invalid server name or credentials, or by insufficient permission. It
can also be caused by the role manager feature not being enabled. Click
the button below to be redirected to a page where you can choose a new
data store. The following message may help in diagnosing the problem: Unable to connect to SQL Server database. I am using Microsoft Visual Web Developer 2005 Express Edition with a local MS SQL Server 2000.I am new to all of this so a little help would be greatThanks.please mail me to dehackers@linuxmail.orgor izzuan@malysia.com
Hi, I am working through "Sams Teach Yourself ASP Dot NET 2.0 in 24 Hours"
I am upto hour 20 where it says
Configuring an ASP.NET Website to Support Membership
To configure our website to support membership, we must launch the ASP.NET Website Administration Tool. To accomplish this, either click the ASP.NET
Configuration icon at the top of the Solution Explorer or click the Website menu's ASP.NET Configuration option. Either way will open a web browser pointed to a page through which the ASP.NET site can be configured. Figure 20.1 shows the ASP.NET Website Administration Tool.
To add user account support, click the Security link. This will take you to the Security screen shown in Figure 20.2. From this screen, you can specify the user accounts in your system, what roles for users exist, and the access rules for users.
However when I click security I get the following error message;
"There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store."
"The following message may help in diagnosing the problem: Unable to connect to SQL Server database."
If I test the provider I get this error;
"Provider Management""Could not establish a connection to the database.""If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider."
I am using MS VWD Express with MS SQL Express. I have run the 'aspnet_regsql' tool on my database which the book fails to mention and verified that the tables were created correctly. I have tried copying the MDF file directly into my 'app_data' directory but this made no difference. I have googled these errors and nothing seems to help. I can connect to the database through a 'SqlDataSource' and have had no trouble with the database in the previous sections of the book. I think it may have something to do with how I setup SQL Express or database permissions, I hope someone can help. Thanks in advance.
Here is a copy of my web.config; <?xml version="1.0"?><!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
--><configuration>
<connectionStrings>
<add name="MyFirstDatabaseConnectionString" connectionString="Data Source=.;AttachDbFilename="C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataMyFirstDatabase.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True"providerName="System.Data.SqlClient" />
</connectionStrings><appSettings/>
<system.web><!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.-->
<compilation debug="false" strict="false" explicit="true" /><pages>
<namespaces><clear />
<add namespace="System" /><add namespace="System.Collections" />
<add namespace="System.Collections.Specialized" /><add namespace="System.Configuration" />
<add namespace="System.Text" /><add namespace="System.Text.RegularExpressions" />
<add namespace="System.Web" /><add namespace="System.Web.Caching" />
<add namespace="System.Web.SessionState" /><add namespace="System.Web.Security" />
<add namespace="System.Web.Profile" /><add namespace="System.Web.UI" />
<add namespace="System.Web.UI.WebControls" /><add namespace="System.Web.UI.WebControls.WebParts" />
<add namespace="System.Web.UI.HtmlControls" /></namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user. -->
<authentication mode="Windows" />
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>-->
</system.web></configuration>
Hello everyone, I've been using the tutorial located here.I am using Microsoft Visual Studio 8.0.50727.42, Microsoft SQL Server 2005, and Microsoft .NET Framework 2.0.50727 SP1.The tutorial uses the SQL Express version and I cannot get it to connect to the standard SQL Server 2005 version. I have used the website ConnectionStrings.com and the whitepaper located here and I wasn't able to get my web app talking to the database through many attempts.I am using a database in Microsoft SQL Server 2005 named SecurityTutorials. This is located on my local machine. There is a login named SecurityTutorials and a user in the SecurityTutorials database named SecurityTutorials who has default schema dbo, who owns the db_owner schema, and has role membership to db_datareader, db_datawriter, and db_ddladmin. The password of this user does match the password in the connection string in web.config, I have verified this multiple times.The problem comes when I open up the CreatingUserAccounts page of this tutorial. When I hit the button 'Create the User Account,' nothing happens. And no record is inserted into the database.Here is my web.config file (if you need any other files then please let me know and I can post them but it is my understanding that this is the only file responsible for the database connection):<?xml version="1.0"?><!-- Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in WindowsMicrosoft.NetFrameworkv2.xConfig --><configuration> <appSettings/> <connectionStrings> <add name="SecurityTutorialsConnectionString" connectionString="Server=localhost;Database=SecurityTutorials;User Id=SecurityTutorials;Password=**********;" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <membership defaultProvider="SecurityTutorialsSqlMembershipProvider"> <providers> <!--Add a customized SqlMembershipProvider --> <add name="SecurityTutorialsSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="SecurityTutorialsConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="SecurityTutorials" requiresUniqueEmail="true" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="false" /> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <authentication mode="Forms"> <forms slidingExpiration="true" timeout="60" /> </authentication> <machineKey decryption="AES" validation="SHA1" decryptionKey="1513F567EE75F7FB5AC0AC4D79E1D9F25430E3E2F1BCDD3370BCFC4EFC97A541" validationKey="32CBA563F26041EE5B5FE9581076C40618DCC1218F5F447634EDE8624508A129" /> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> </system.web></configuration>Note: The password is an actually password. Not sure if it'd be a good idea to post that here, even though it is a test database.Thank you all in advance for your advice!
View 1 Replies View RelatedI am currently trying to connect to a SQL Server instance with my host provider. I am having issues trying to connect to it.
I am using a Linkysys router and I have opened up the ports that SQL Server needs but I am getting an error - "SQL Server does not exist or Access denied". I've contacted the support but they are telling me it is an error on my end.
Has anyone experienced this issue before?
Thanks in advance for the help.