Hello
I am able to connect to the server and most of the time I can't connect.
It is important to be able to connect so I can manage my mdf - database.
To test ... I disable the firework but I still can't connect 90% of the time.
Thank you in advance.
~ Peaches ~
Server Error in '/Dive' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this is the error message I found when I run my asp.net application and the connection string as follows:
<add key="ConnectionInfo" value="Server=(local);Database=Dive;Trusted_Connection=yes;" />
can someone tell me how to connect and how to specify username and password in Visual Web Developer 2005 Express Edition..........
I'm a little bit new on VWD 2005 I need an assistance on it.
My VS 2005 website project was connecting to a remote SQL Server. But after I move the database to the second SQL Server, I got the following error message from running my website project:
Named Pipes Provider: Logon failure: unknown user name or bad password.
I do everything same like what I did in the first SQL server:
Using “SQL Server and Windows� authentication and “System account�;
Create a domain account IIS_WPG;
Grant this IIS_WPG as db_owner for the database;
In web.config, add the name and password to the end of connectionstring;
Make sure the SQL Server has “Named Pipes� and “TCP/IP� protocols.
I have no idea what I can do else, anybody has suggestions?
Greetings:
We have a copy of SQL2k Report Services running on a Windows 2003 Server. But the database used by the Reports is actually on another box in our network. (This is a option you can use during install.) This setup worked fine for about a year but now neither the reports and ReportManager no longer run. The Reporting services Log error is:
System.Net.WebException: The underlying connection was closed: Unable to connect to the remote server.
In a browser we get the error:
---
"Directory Listing Denied"
"This Virtual Directory does not allow contents to be listed."
---
Turning on the option to list directory contents in IIS does not resolve the issue.
Anyone seen this creep up before? I am unaware of any changes to the machine's security in the last few weeks but something has obviously changed.
I can ping the remote servers where the DB's are stored.
I am using Windows Integrated Authentication.
I have a dev box with a similar configuration, except everything is hosted locally, and it runs fine.
Any ideas?
Thanks.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_54_49.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:54:59:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
-------------------------------------------------------------------------------------------------------------------------------------------------
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_41_11.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:37:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:46:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:53:56:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: Unable to connect to the remote server
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!4/7/2007-10:54:02:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
Hi!
When trying to log into Reporting Services in SQL Server 2005 Management Studio, I receive the following error message:
TITEL: Verbindung mit Server herstellen
------------------------------
Es kann keine Verbindung mit 'RD2MWD000349' hergestellt werden.
------------------------------
ZUSĂ„TZLICHE INFORMATIONEN:
Unable to connect to the remote server (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
No connection could be made because the target machine actively refused it (System)
------------------------------
SCHALTFLĂ„CHEN:
OK
------------------------------
Has anybody had that problem before? Happens right after installation, no customisation of the SQL Server has been done yet. And I run the server on localhost.......
We have a problem to connect to a specific database on our local network from a specific Vista machine. Several other XP and Vista machines are able to connect to the database without any problem. However, with the two latest Vista machines we received, it is impossible to connect to the database. In Microsoft SQL server Management studio express, we have the error 26 "error locating server/instance specified". We are sure the server name we entered is correct. We suppose the server is correctly configured as we are able to connect from other computers. From the machines that are not able to connect to the database, we can connect without problem to other databases. We also see the server, where the database is, on the network servers list in Microsoft SQL server Management studio. .
The version of the components are:
Microsoft SQL Server Management Studio Express 9.00.3042.00
Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205)
Microsoft MSXML 3.0 4.0 6.0
Microsoft Internet Explorer 7.0.6000.16575
Microsoft .NET Framework 2.0.50727.312
Operating System 6.0.6000
We verified we have the same version of components on the Vista machine from which the connection is successful.
The network database has the version 8.0.
We are usinng sql server authentification method.
We try to specify the IP address instead of the server name in the connection string. We also tried to specify the port.
We also tried to disable the firewall.
Unfortunatetly, we are not able to connect to this database. Any suggestion ?
I've recently got a new webhosting account with hostinguk who have do the following:
We have created a SQL 2005 database for you named: DBCOX10289
and a system DSN named: DBCOX10289
To access your database you will need Microsoft SQL Server Management Studio / Express
If you do not have a copy of this you can download Microsoft SQL Server management Studio Express at the following location:
http://msdn.microsoft.com/vstudio/express/sql/default.aspx
In enterprise manager you should register the server: sql5.hostinguk.net
You will need to use the following login name and password when registering the server and accessing your database.
SQL 2005 username: COX10289
SQL 2005 password: password
To use this server within your web site code please ensure that you refer to the server as sql5.hostinguk.net
PLEASE NOTE: Do NOT use the IP address of this server directly as this will cause problems for you should we make network changes at any point in time.
I have tried and am in despair but still am unable to connect to the server. Running a XP machine In Administrative tools ODBC I have created a DSN called DBCOX10289 with the server name sql.hostinguk.net. upon completing the ODBC setup I get this:
Microsoft SQL Native Client Version 09.00.3042
Data Source Name: DBCOX10289
Data Source Description: Keystages
Server: sql5.hostinguk.net
Use Integrated Security: No
Database: (Default)
Language: (Default)
Data Encryption: No
Trust Server Certificate: No
Multiple Active Result Sets(MARS): No
Translate Character Data: Yes
Log Long Running Queries: No
Log Driver Statistics: No
Use Regional Settings: No
Use ANSI Quoted Identifiers: Yes
Use ANSI Null, Paddings and Warnings: Yes
I then click on test connection and get
Microsoft SQL Native Client Version 09.00.3042
Running connectivity tests...
Attempting connection
Connection established
Verifying option settings
Disconnecting from server
TESTS COMPLETED SUCCESSFULLY!
Whne I'm scrolling through the options in ODBC it can see all the other databases on the server.
When I then try register the server in SQL server management studio express
Servername: sql5.hostinguk.net
Authentication: SQL Server Authentication
Username: COX10289
Password : password
===================================
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
===================================
Login failed for user 'COX10289'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: sql5.hostinguk.net
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
------------------------------
I try this servername as well: sql5.hostinguk.netDBCOX10289 and still get
===================================
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
I can ping the servername and get the IP address
I can telnet the server and port 1433 and connect successfully
The hosting company do not support sql 2005 express
I have tried researching this as much as possible, all to no avail. What can
I do?
Hi,
I€™m using a Script Component in SSIS to call a Web Service. The web service is wrapped, using the wsdl tool. The package works, on my local enviroment. Script component calls the web service and returns the data. I€™ll move the web service to another server, web service as Anonymous access is enable. Deployed the Package on a SQL server. But, when excuting the package I get the below error. I can view and invoke the web method and see data even. SSIS is running under a NT AUTHORITYNetworkService account. I know that the problem is permission, but how would I resolve the issue.
Error:
OnInformation,SERVER,DOMAINSqlAdmin,MISPackage,{190832FB-4FF1-4ECD-BF53-4A49864089B4},{D7BF27CD-BDF1-418A-ABFE-BA0A24B921FB},3/14/2007 10:59:11 AM,3/14/2007 10:59:11 AM,0,0x,System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.Service.GetMISAccounts()
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.ScriptMain.CreateNewOutputRows()
Any Help will be appreciated
SQL Express running on Server 2003 SP1, not a domain controller - but prior to installing SQL Express, I did dcpromo promote and then demoted it back to a workgroup server.
Connecting with Vista build 5600, Studio express 9.00.2047 with MDAC 6.00.5600.1638. Server 2003 MDAC is 2.82.1830.
I came across this article on the net:
http://www.developersdex.com/sql/message.asp?p=1867&ID=%3C309C7496-F36B-4398-9C52-322E6CB8DE3B%40microsoft.com%3E
Is my mis-matched versions of MDAC causing me this grief?
Otherwise, I have remote set up for TCP and Named Pipes, I've run sp_configure 'remote admin connections', 1; my login is set to SQL Authentication with everything granted. I've tried running the service as network, local and MachineAdministrator; ports are open per:
http://support.microsoft.com/kb/555585
I wanted to ask before I start replacing the MDAC on either the Vista or Server 2003 machine... If that's the problem, which version(s) do I change? to?
Full error message:
An error has occurred while establishing a connection to the server. While connecting to SQL Server 2005, this failure may be cuased by the fact that under the default settings SQL Server does not allow remote connecitons, (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 1326)
Thanks, John
Hi all,
i am trying to consume an webservice which under secure layer (HTTPS)
eg: https://test.com/test.asmx
i'm connected thro' a proxy server.
when i use the same url in IE it works fine, but when i connect thro' http connection manager it always throws me a error saying "unable to connect to remote server "
can anyone provide me solution to over come this problem
Hello Everyone,
I have a Report Server setup on my laptop (XP Pro SP2). I have developed a report which I would like to view from a Windows Forms Application (VB.NET) using a ReportViewer. When I try it from the local machine it works correctly, but if I try to connect and preview the same report from my other PC (Vista Home Premium) I am getting the "Unable to connect to the remote server. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because the connected host failed to respond." error.
I have setup the Processing mode to Remote and correctly setup the ReportPath and ReportServerUrl using:
With rptRetEmp
.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Remote
.ServerReport.ReportServerUrl = New Uri("http://192.168.1.2/CPMReports")
.ServerReport.ReportPath = "/CPM_Reports/Test"
.ServerReport.Refresh()
.RefreshReport()
End With
Where CPMReports is the Report Server virtual directory and CPM_Reports is the folder where the report Test resides.
I do not know if this has anything to do with the fact that Vista Home does not have Report Services enabled or it is just a permissions problem. I have red several posts that describe similiar problems, but I could not find a solution.
Thank you for your help.
Daniel D.
Vista + SQL Server 2005
Reporting Service Configuration Tool: No Red Cross.
http://localhost/reportserver get this error:
HTTP Error 403.1 - Forbidden
You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run.
http://localhost/reports get this error:
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I googled but not found anything useful.
Thanks in advance!!!
Hi,
I have Windows XP Home Workgroup LAN.
I am treating one of the XP Home system as 'Server' and installed SQL Express 2005 SP1. Enabled remote connections access.
I have total 4 XP Home systems, out of which one i am treating as Server, from the rest 3 computers, 2 are successfully connected to the Server and able to access SQL Express without any problems. But the 3rd system is unable to communicate with the Server. I disabled all firewalls in this 3rd system but still unable to connect to the server. I am able to ping the server, browse for shared folders on the server. Except SQL Express remote connection, everything else in the network is accessible from this 3rd computer.
Can anyone help me on how to troubleshoot this 3rd computer sql express connection problem to the server.
I don't have any error message to provide here. It just says, unable to connect to sql server, verify username/password etc.
Is there any limitation on SQL Express remote connections ?
Environment: SQL Server 2014 on Windows Server 2012 R2.
We have our availability group configured and working. However, when we try to connect to the AG listener from a remote server, we have to use the fully qualified domain name (FQDN) to connect. We'd like to be able to connect just using the host name. Interestingly, ping actually resolves the IP correctly for either.
I am not able to connect to Remote Distributor from Publisher using Administrative Link Password. I have configured the Distributor on 1 m/c and Publisher on another m/c. When i use the wizard to configure the publisher using remote distributor. I have also specified the same Admin Password link (distributor_admin) in the distributor m/c.
Â
I am getting the following message:
Â
TITLE: New Publication Wizard------------------------------
SQL Server could not connect to the Distributor using the specified password.
[URL]
------------------------------ADDITIONAL INFORMATION:
Connection to server [SANMENON] failed.OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "Login timeout expired".OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". (Microsoft SQL Server, Error: 21670)
[URL]
------------------------------BUTTONS:
OK------------------------------
Hi!
I'm trying to connect a DB in SQL express with a program in VB.NET Express. I'm using the Data Source Configuration Wizzard. When I select the file (.mdf), the following message appears:
Unable to open the physical file "path to my file". Operating system error 5: "5(error not found)".
An attempt to attach an auto-named database for file 'myFile' failed. A database with the same name exists, or secified file cannot be opened, or it is located in UNC share.
I'm using the Windows authentication for this, but if I try with the sa user, I get the following message:
Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance. The connection will be closed.
Any ideas to solve this?
Thanks
Jose Israel
Cannot someone please help me with following problem. I am trying to create a program to update a sql datbase from.NET 2003. I am doing this by using SQL Server Express 5. The problem is, is that when I run the program and click the button to view the table in SQL Express 5 I keep getting an 'System.NullReferenceException' and the table is not shown. When I look at the debug details it says that 'object reference not set to an instance of an object'.
Am not sure where am goin wrong as the connection is opened to the local server in SQL Express and I have created a connection object and initialised it to the address fo the datatable in SQL.
Please find below the code I am working on which shows the connection string in question and the table being called in button 6 which causes the exception.
Any help would be greatly appreciated....thanks
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.Data.SqlClient;namespace MovieBase
{
/// <summary>
/// Summary description for Form1.
/// </summary>public class Form1 : System.Windows.Forms.Form
{private System.Windows.Forms.Button button1;
private System.Windows.Forms.Button button2;private System.Windows.Forms.Button button3;
private System.Windows.Forms.Label label1;private System.Windows.Forms.Button button4;
private System.Windows.Forms.Button button5;private System.Data.SqlClient.SqlConnection sqlConnection1;
private System.Windows.Forms.ComboBox GengreList;private System.Windows.Forms.Button button6;
private System.Windows.Forms.Button button7;private System.Data.SqlClient.SqlCommand sqlSelectCommand1;
private System.Data.SqlClient.SqlCommand sqlInsertCommand1;private System.Data.SqlClient.SqlDataAdapter sqlDataAdapter1;
private System.Windows.Forms.Label label2;public DataSet MDSet = new DataSet();
SqlDataAdapter MyAdapt;private System.Data.SqlClient.SqlCommand sqlSelectCommand2;
private System.Data.SqlClient.SqlCommand sqlInsertCommand2;private System.Data.SqlClient.SqlDataAdapter sqlDataAdapter2;public SqlConnection MovCon = new SqlConnection("Data Source = SHERMAN/SQLEXPRESS;Initial Catalog= MovieDBase;User Id=myUsername;Password=myPassword");
/// <summary>
/// Required designer variable.
/// </summary>private System.ComponentModel.Container components = null;public Form1()
{
//
// Required for Windows Form Designer support
//
InitializeComponent();
//
// TODO: Add any constructor code after InitializeComponent call
//
}
/// <summary>
/// Clean up any resources being used.
/// </summary>protected override void Dispose( bool disposing )
{if( disposing )
{if (components != null)
{
components.Dispose();
}
}base.Dispose( disposing );
}#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>private void InitializeComponent()
{System.Resources.ResourceManager resources = new System.Resources.ResourceManager(typeof(Form1));
this.button1 = new System.Windows.Forms.Button();this.button2 = new System.Windows.Forms.Button();
this.button3 = new System.Windows.Forms.Button();this.label1 = new System.Windows.Forms.Label();
this.button4 = new System.Windows.Forms.Button();this.button5 = new System.Windows.Forms.Button();
this.sqlConnection1 = new System.Data.SqlClient.SqlConnection();this.GengreList = new System.Windows.Forms.ComboBox();
this.button6 = new System.Windows.Forms.Button();this.button7 = new System.Windows.Forms.Button();
this.sqlSelectCommand1 = new System.Data.SqlClient.SqlCommand();this.sqlInsertCommand1 = new System.Data.SqlClient.SqlCommand();
this.sqlDataAdapter1 = new System.Data.SqlClient.SqlDataAdapter();this.label2 = new System.Windows.Forms.Label();
this.sqlSelectCommand2 = new System.Data.SqlClient.SqlCommand();this.sqlInsertCommand2 = new System.Data.SqlClient.SqlCommand();
this.sqlDataAdapter2 = new System.Data.SqlClient.SqlDataAdapter();this.SuspendLayout();
//
// button1
// this.button1.Location = new System.Drawing.Point(184, 168);
this.button1.Name = "button1";this.button1.Size = new System.Drawing.Size(96, 23);
this.button1.TabIndex = 0;this.button1.Text = "Add A Movie";
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// button2
// this.button2.Location = new System.Drawing.Point(184, 248);
this.button2.Name = "button2";this.button2.Size = new System.Drawing.Size(96, 23);
this.button2.TabIndex = 1;this.button2.Text = "Delete A Movie";
this.button2.Click += new System.EventHandler(this.button2_Click);
//
// button3
// this.button3.Location = new System.Drawing.Point(184, 208);
this.button3.Name = "button3";this.button3.Size = new System.Drawing.Size(96, 23);
this.button3.TabIndex = 2;this.button3.Text = "View Movies";
this.button3.Click += new System.EventHandler(this.button3_Click);
//
// label1
// this.label1.Font = new System.Drawing.Font("Myriad Web Pro", 14.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
this.label1.Location = new System.Drawing.Point(280, 8);this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(120, 24);this.label1.TabIndex = 3;
this.label1.Text = "MOVIEBASE";
//
// button4
// this.button4.Location = new System.Drawing.Point(448, 344);
this.button4.Name = "button4";this.button4.Size = new System.Drawing.Size(192, 23);
this.button4.TabIndex = 4;this.button4.Text = "Current Movie Count";
this.button4.Click += new System.EventHandler(this.button4_Click);
//
// button5
// this.button5.Location = new System.Drawing.Point(496, 112);
this.button5.Name = "button5";this.button5.Size = new System.Drawing.Size(128, 32);
this.button5.TabIndex = 5;this.button5.Text = "Find Movie";
this.button5.Click += new System.EventHandler(this.button5_Click);
//
// sqlConnection1
// this.sqlConnection1.ConnectionString = "workstation id=SHERMAN;packet size=4096;integrated security=SSPI;data source="SHE" +
"RMAN\SQLEXPRESS";persist security info=False;initial catalog=MovieDBase";this.sqlConnection1.InfoMessage += new System.Data.SqlClient.SqlInfoMessageEventHandler(this.sqlConnection1_InfoMessage);
//
// GengreList
// this.GengreList.BackColor = System.Drawing.SystemColors.InactiveCaptionText;this.GengreList.Items.AddRange(new object[] {
"Horror",
"Comedy",
"Family/Entertainment",
"Drama",
"Boxsets",
"Sci -fi/Fantasy"});this.GengreList.Location = new System.Drawing.Point(184, 344);
this.GengreList.Name = "GengreList";this.GengreList.Size = new System.Drawing.Size(121, 21);
this.GengreList.TabIndex = 6;
//
// button6
// this.button6.Location = new System.Drawing.Point(264, 104);
this.button6.Name = "button6";this.button6.Size = new System.Drawing.Size(160, 40);
this.button6.TabIndex = 7;this.button6.Text = "View Movie List";
this.button6.Click += new System.EventHandler(this.button6_Click);
//
// button7
// this.button7.Font = new System.Drawing.Font("Microsoft Sans Serif", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
this.button7.Location = new System.Drawing.Point(360, 432);this.button7.Name = "button7";
this.button7.Size = new System.Drawing.Size(104, 40);this.button7.TabIndex = 8;
this.button7.Text = "Exit Movie Base";this.button7.Click += new System.EventHandler(this.button7_Click);
//
// sqlSelectCommand1
// this.sqlSelectCommand1.CommandText = "SELECT [Item Number], [Movie Title], Genre, [Date of Release], Director FROM [Mov" +
"Table 1]";this.sqlSelectCommand1.Connection = this.sqlConnection1;
//
// sqlInsertCommand1
// this.sqlInsertCommand1.CommandText = "INSERT INTO [MovTable 1] ([Item Number], [Movie Title], Genre, [Date of Release]," +
" Director) VALUES (@Param1, @Param2, @Genre, @Param3, @Director); SELECT [Item N" +
"umber], [Movie Title], Genre, [Date of Release], Director FROM [MovTable 1]";this.sqlInsertCommand1.Connection = this.sqlConnection1;
this.sqlInsertCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Param1", System.Data.SqlDbType.VarChar, 50, "Item Number"));this.sqlInsertCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Param2", System.Data.SqlDbType.VarChar, 50, "Movie Title"));
this.sqlInsertCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Genre", System.Data.SqlDbType.VarChar, 50, "Genre"));this.sqlInsertCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Param3", System.Data.SqlDbType.VarChar, 50, "Date of Release"));
this.sqlInsertCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Director", System.Data.SqlDbType.VarChar, 50, "Director"));
//
// sqlDataAdapter1
// this.sqlDataAdapter1.InsertCommand = this.sqlInsertCommand1;
this.sqlDataAdapter1.SelectCommand = this.sqlSelectCommand1;this.sqlDataAdapter1.TableMappings.AddRange(new System.Data.Common.DataTableMapping[] {
new System.Data.Common.DataTableMapping("Table", "MovTable 1", new System.Data.Common.DataColumnMapping[] {new System.Data.Common.DataColumnMapping("Item Number", "Item Number"),
new System.Data.Common.DataColumnMapping("Movie Title", "Movie Title"),new System.Data.Common.DataColumnMapping("Genre", "Genre"),
new System.Data.Common.DataColumnMapping("Date of Release", "Date of Release"),new System.Data.Common.DataColumnMapping("Director", "Director")})});
this.sqlDataAdapter1.RowUpdated += new System.Data.SqlClient.SqlRowUpdatedEventHandler(this.sqlDataAdapter1_RowUpdated);
//
// label2
// this.label2.Font = new System.Drawing.Font("Myriad Web Pro", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
this.label2.Location = new System.Drawing.Point(64, 344);this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(120, 23);this.label2.TabIndex = 9;
this.label2.Text = "Genres";
//
// sqlSelectCommand2
// this.sqlSelectCommand2.CommandText = "SELECT [Item Number], [Movie Title], Genre, [Date of Release], Director FROM [Mov" +
"Table 1]";this.sqlSelectCommand2.Connection = this.sqlConnection1;
//
// sqlInsertCommand2
// this.sqlInsertCommand2.CommandText = "INSERT INTO [MovTable 1] ([Item Number], [Movie Title], Genre, [Date of Release]," +
" Director) VALUES (@Param1, @Param2, @Genre, @Param3, @Director); SELECT [Item N" +
"umber], [Movie Title], Genre, [Date of Release], Director FROM [MovTable 1]";this.sqlInsertCommand2.Connection = this.sqlConnection1;
this.sqlInsertCommand2.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Param1", System.Data.SqlDbType.VarChar, 50, "Item Number"));this.sqlInsertCommand2.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Param2", System.Data.SqlDbType.VarChar, 50, "Movie Title"));
this.sqlInsertCommand2.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Genre", System.Data.SqlDbType.VarChar, 50, "Genre"));this.sqlInsertCommand2.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Param3", System.Data.SqlDbType.VarChar, 50, "Date of Release"));
this.sqlInsertCommand2.Parameters.Add(new System.Data.SqlClient.SqlParameter("@Director", System.Data.SqlDbType.VarChar, 50, "Director"));
//
// sqlDataAdapter2
// this.sqlDataAdapter2.InsertCommand = this.sqlInsertCommand2;
this.sqlDataAdapter2.SelectCommand = this.sqlSelectCommand2;this.sqlDataAdapter2.TableMappings.AddRange(new System.Data.Common.DataTableMapping[] {
new System.Data.Common.DataTableMapping("Table", "MovTable 1", new System.Data.Common.DataColumnMapping[] {new System.Data.Common.DataColumnMapping("Item Number", "Item Number"),
new System.Data.Common.DataColumnMapping("Movie Title", "Movie Title"),new System.Data.Common.DataColumnMapping("Genre", "Genre"),
new System.Data.Common.DataColumnMapping("Date of Release", "Date of Release"),new System.Data.Common.DataColumnMapping("Director", "Director")})});
//
// Form1
// this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
this.BackColor = System.Drawing.SystemColors.InactiveCaption;this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage")));
this.ClientSize = new System.Drawing.Size(704, 502);this.Controls.Add(this.label2);
this.Controls.Add(this.button7);this.Controls.Add(this.button6);
this.Controls.Add(this.GengreList);this.Controls.Add(this.button5);
this.Controls.Add(this.button4);this.Controls.Add(this.label1);
this.Controls.Add(this.button3);this.Controls.Add(this.button2);
this.Controls.Add(this.button1);this.Name = "Form1";
this.Text = "Form1";this.ResumeLayout(false);
}
#endregion
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]static void Main()
{Application.Run(new Form1());
}private void sqlConnection1_InfoMessage(object sender, System.Data.SqlClient.SqlInfoMessageEventArgs e)
{
}private void button5_Click(object sender, System.EventArgs e)
{
MessageBox.Show("///Under Construction");
}private void button1_Click(object sender, System.EventArgs e)
{
MessageBox.Show("///Under Construction");
}private void button2_Click(object sender, System.EventArgs e)
{
MessageBox.Show("///Under Construction");
}private void button3_Click(object sender, System.EventArgs e)
{
MessageBox.Show("///Under Construction");
}private void button4_Click(object sender, System.EventArgs e)
{
MessageBox.Show("There is currently no movie count available");
}private void button6_Click(object sender, System.EventArgs e)
{
Form2 F2 = new Form2();
sqlConnection1.Open();
MyAdapt.Fill(MDSet, "MovTable 1");
F2.dataGrid1.DataSource = MDSet;
}private void button7_Click(object sender, System.EventArgs e)
{this.Close();
sqlConnection1.Close();
}private void sqlDataAdapter1_RowUpdated(object sender, System.Data.SqlClient.SqlRowUpdatedEventArgs e)
{
}
}
}
I am unable to connect to express edition by specifying 'TCP/IP' in the Network Protocol option of 'Connection Properties' in managment studio. It gives the following error.
TITLE: Connect to Server
------------------------------
Cannot connect to MYCOMPUTERSQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I had already enabled TCP/IP from SQL Server Configuration Manager.
just installed a new machine with windows 2003 server and SQL SERVER EXPRESS; I am able to connect to the SQL Server using my windows credentials however I am unable to log on to it using 'sa' (and no password) user; i get the following error message.
2007-05-07 15:42:12.32 Logon Error: 18456, Severity: 14, State: 7.
2007-05-07 15:42:12.32 Logon Login failed for user 'sa'. [CLIENT: <local machine>]
would really appreciate any help... thanks
Hi, I am trying to connect with Database.mdf(Server Express) which is inside App_data with my ASP.NET website but i am receiveing an error which i have pasted below. Initially i tried using a business Object(.xsd) but while specifying the datasource in DataSourceobject i got nothing using wizard(which lists all the Adapter Methods(insert,select) of my business object) hence i am trying to connect without a business object. i.e just using the connection string(ConnectionStrings:DatabaseConnectionString) but this results below Error. Kindly help:; ------------------------------------------------------------------------------------------ Server Error in '/MapSpeaks1' Application. -------------------------------------------------------------------------------- Unable to open the physical file "c:inetpubwwwrootMapSpeaks1App_DataMapSpeaks.mdf". Operating system error 5: "5(Access is denied.)". An attempt to attach an auto-named database for file c:inetpubwwwrootMapSpeaks1App_DataMapSpeaks.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Unable to open the physical file "c:inetpubwwwrootMapSpeaks1App_DataMapSpeaks.mdf". Operating system error 5: "5(Access is denied.)". An attempt to attach an auto-named database for file c:inetpubwwwrootMapSpeaks1App_DataMapSpeaks.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): Unable to open the physical file "c:inetpubwwwrootMapSpeaks1App_DataMapSpeaks.mdf". Operating system error 5: "5(Access is denied.)". An attempt to attach an auto-named database for file c:inetpubwwwrootMapSpeaks1App_DataMapSpeaks.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735059 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.GridView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.PreRenderRecursiveInternal() +41 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
View 1 Replies View RelatedHi,
I installed Sqlexpress server 2005 and am able to connect to the server using the sqlexpress manager.
The connection parameters are:
server: 127.0.0.1 (This is an alias name pointing to TMD03SQLEXPRESS)
username:sa
password:test
mode: sql server and windows authentication mode
TCP/IP : enabled and listening on port number 1433.
But I am not able to connect to the server using PHP's mssql_connect function.
I tried various combinations like
mssql_connect("127.0.0.1","sa","test")
mssql_connect("local","sa","test")
mssql_connect("localhost","sa","test")
mssql_connect("TMD03SQLEXPRESS","sa","test")
mssql_connect("127.0.0.1,1433","sa","test")
but none of them works. I also tried OSQL and SQLCMD and they don't work either. They give me the following error message.
[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL
Server [2].
[SQL Native Client]Login timeout expired
[SQL Native Client]An error has occurred while establishing a connection to
the server. When connecting to SQL Server 2005, this failure may be caused by
the fact that under the default settings SQL Server does not allow remote
connections.
Can anyone please let me know what am doing wrong here?
Regards,
Celia
I've never used SQL Server before. I installed VB 2005 Express (I've been working with VB since I was 16), and SQL Server 2005 Express.
I installed the server with all the default settings and created a small database to handle customer information (a remake of some Access and Oracle databases I've made before).
I'm told, however, each time I try to connect to the database via VB, that SQL Server isn't accepting remote connections...
Remote? It's on a local computer. So is VB...what is going on here? Is there a setting I've missed?
Warren Ayen
IBM
Hello,
I'm unable to connect to Sql Server express using SQLCMD. I've trawled through countless web pages to try to solve my problem but to no avail.
Using windows 2000.
I'm getting the message:
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a coonection to SQL Server...............
Sqlcmd: Error: Microsoft SQL Native Client : Login timout expired.
I've enabled the various protocols in the Sql config manager......
Please help!
Thanks,
dom
Within SQL Express 2005 running on Windows server 2003 using asp.net as the interface
This Is the Situation, at first i recieved this error
"
Previously we received a €śfailed to generate a user instance of SQL due to a Failure in Starting the process for the user instance. The connection will be closed€?
I looked up this error and it seams to be a flaw/bug in sql server express the error occurs because of the use of remote login on the windows 2003 server.
The solution to this was to delete an sql server directory that resides here
C:Documents and SettingsUSERNAMELocal SettingsApplication DataMicrosoftMicrosoft SQL Server DataSQLEXPRESS.
This indeed solved the failed to generate a user instance once the server was re-started however now I get a responce within the asp.net pages (which will have been built into those pages)
Your login attempt was not successful. Please try again.
now i have checked the simple errors caps lock etc and tried to log on to the SQL pages directly on the server with exactly the same result. the system was built by somone else and has not been modified "intentionally" just recently i added a few extra databases to the same server location, could this have caused the problem. to my knowlage (e.g i cant recall changing any settings)
there are one or two extenuation circumstances just recently the whole file directory was transfered from one HDD to another and then back to it's original position now i dont think this altered data but possibly there is some inbuilt security or something, i would most sincearly appreciate any questions or answers about this possibly things i havent mentioned that you need to know, just let me know i will get back to you
thanks in advance
Chris
I have read all of the posts regarding this subject as well as 3"Dummies" guides and I keep having the same problems. I have a verysimple multi-user application that has to hit a database. Wecuerrently have this system deployed and it is working fine on adomain based network. We are scaling back and the network we will beusing is now a workgroup not a domain.It should be simple. I have XP boxes (clients) trying to hit the SQLServer Express database on a Windows Server 2003 machine. It is aclosed network so security is not an issue. I am trying to make thisthing wide open. All I want is for the user to be logged in on hisclient machine, run the application, and access/update the databasewithout having to re-authenticate to the SQL server. I want windowsto handle all of the authentication between the XP machines and theServer 2003 machine.Any suggestions would be greatly appreciated.
View 1 Replies View RelatedMy situation: I have one virtual folder on a customer's server that hosts a web service which connects to Sql Server Express. This has been working for months.
The connection string that i use is:
(obviously the names have been changed to protect the innocent)
User ID=auser;Password=apassword;Initial Catalog=acatalog;Data Source=0.0.0.0SQLEXPRESS
I have recently added another virtual folder to the server, and it needs to connect to the same sql server. In this case it is a "regular" web site. I have it set up to use the same connection string as the web services site ( I can't think of any reason why it wouldn't be the same), however when I try to open the connection ( when I call mySqlConnection.Open(); ), I get get this error:
"SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified"
I am stumped as to why code in one virtual folder has no problem, while the other does. Both virtual and physical folders are on the same machine, and the Sql Server Express is installed on that machine.
The server is a MS Windows Server 2003 machine.
More details as requested.
Thanks,
Kirk
Getting error 1326.
I'm running SQL Express on Server 2003 SP1 (workstation - although, I did dcpromo promote and demote prior to installing SQL Express).
I'm trying to connect from SQL Studio Express on Vista.
TCP and Named Pipes are selected in Surface Area Config; sp_config remote, access..., 1 was run (per KB); ports 1433 & 1434 are open (I think 435 also was opened when I ran the KB instructions); Mixed mode is selected, user is set for SQL Auth, password is correct; all permissions are granted.
I found an article online which stated that mixed versions of MDAC can lead to the problem. The server has 2.82.1830 and the client has 6.0.5600.16834. Could this be the problem? If so, how to solve?
Thanks, John
Hi,
I have installed SQL Server 2005 express edition on Windows 2003 Server, but i am unable to make a connection using
sqlcmd -S <servnameinstancename> -U <loginID> -P <pwd> -d <dbname>
but i am able to make the connection using
sqlcmd -S <servnameinstancename>,<portnumber> -U <loginID> -P <pwd> -d <dbname>
What could be the possible reason for this and how can i configure sql
server 2005 express edition to make connections without specifying any
portnumber in the connection string. Both the sqlserver database
service and browser services are running.
Regards
Salil
hi
I am trying to connect to sql server from a small c++ program , I am getting the following error
An error has occured when establishing connection to server. The failure may be caused by the fact that under the default settings does not allow remote connections.(Sql network interfaces error no 26
error locating server instance specified )
I chkd the default settings and it allowed remote connections. I also have default instance for the sql server
Please enlighten
thanks
athi
Hi,
I think this is a taff problem for me when I connect to remote sql express from .net application
I use Connection String:
Data Source=MYREMOTESVRSQLEXPRESS;Initial Catalog=microDB;Integrated Security=SSPI;Persist Security Info=True;User ID=micro;Password=micro
OR
Data Source=MYREMOTESVRSQLEXPRESS;Initial Catalog=microdb;Integrated Security=True;Persist Security Info=True;User ID=micro;Password=micro
And found EROR message when running aplication from client comp/application
"... Login failed foruser MYCOMPGuest... "
How to setup a user in the sql expss server to support Client/Server Application?
Anyone can help me?
regards.
md5
I am having trouble to use SSMSE to remotely connect SQL Express server using IPs other than the base IP of the machine.
Machine settings:
(1) Has multiple IP configured. Those IP are accessible remotely
(2) Firewall is not on.
SQL Express server configuration:
(1) TCP/IP and named pipe are on
Browser service state:
(1) running
(2) listening at 0.0.0.0:1434 (UDP)
SSMSE connection results:
(1) with <baseIP><instance>, connects OK
(2) with <otherIP><instance>, connection failed.
Both connections use exactly the same authentication information.
Testing results using telnet:
(1) telnet <baseIP> 1434, OK
(2) telnet <otherIP> 1434, OK
Does SSMSE actually only listen on the base IP even it shows to listen on all the IPs?
I am trying to connect to another computer in my local network which has Windows XP installed. It has SQL server 2000. I get an error message 'Time out period elapsed' when i try to connect to SQL server 2000 thru SQL Server Management Studio Express' Please guide.
View 4 Replies View Related