Unable To Connect With Local Db Though My Asp.net App, Error: 40
Oct 23, 2006
Hi all,
I having problems connecting to my local database through my asp.net site. I'm able to connect to the database using Query Analyzer with the following connection properties:
Server: local
Sql Server Authentication: checked
User Name: sa
and the Password is left blank
This is the connection string i'm using on the website:
Data Source=local;Initial Catalog=myDatabaseName;User ID=sa;Password=;
This is the error i'm getting:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Any suggestions appreciated.
Thanks
View 1 Replies
ADVERTISEMENT
Mar 20, 2000
Hi !! everbody i have a problem in sql executive ( 6.5 version),whenever i am using cmd.exe for running scheduled task it runs fine but if i am using TSQL task type to run a task then it gives error and says that 'unable to connect to server '(local)'.
our this TSQL task type was running previously but now for last 5 days itis not runnig.
Your reply would be highly appreciated
Pl. reply as early as possible
thanks in advace
from
rajesh
View 2 Replies
View Related
Nov 8, 2007
Hi
I had Sql Server 2005 installed on a machine of mine and was able to connect to the local, however I had to unistall it. Recently I put it back on the machine and found that I was no longer able to connect to the local server.
Does anyone know why this has happened and how it can be resolved?
Thanks
View 8 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Jun 12, 2007
I have an interesting problem. I am running xp pro and when I try to connect to an instance of SQL2005 running on WIN2003 using SQL Sevrer Management Studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
This instance is protected by a vpn and is running on a clustered environment. I can connect to other SQL2000 servers that are running on a clustered environment and SQL2005 that is not clustered.
After adding a host file entry, I was able to connect to the server using OSQL. I was able to telnet into the port the server is listening on.
Others in my group can connect to the server using SQL Server Management Studio with no problems. They are running Win2003 Server. I originally could connect to this server, but I needed to change my password. After that I lost my remote connectivity. I can RDP into the server and map drives to the server. I map to a local administrator of this machine.
I am not sure what else to try?
Help.
View 4 Replies
View Related
Mar 6, 2008
I have had this issue just pop up. I have local users who can connect fine, but my users that require connection by VPN cannot connect. I get the server not available or access denied error. I did confirm that the VPN'ers are connected to the network correctly and can see that their shares and mappings are correct. Any ideas? Thanking you all in advance!!
View 6 Replies
View Related
Oct 10, 2005
on the same machine both 2000 and 2005.
View 13 Replies
View Related
Aug 2, 2007
Anyone know how to get around this?
TITLE: Connect to Server
------------------------------
Cannot connect to OES-XP1007.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>
SQL Server Reporting Services
</title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.3054.00" />
<meta name="HTTP Status" content="500" />
<meta name="ProductLocaleID" content="9" />
<meta name="CountryLocaleID" content="1033" />
<meta name="StackTrace" content />
<style>
BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black}
H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt}
LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline}
.ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray}
A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLORFF3300; TEXT-DECORATION:underline}
A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; colorFF3300; TEXT-DECORATION:underline}
</style>
</head><body bgcolor="white">
<h1>
Reporting Services Error<hr width="100%" size="1" color="silver" />
</h1><ul>
<li>An internal error occurred on the report server. See the error log for more details. (rsInternalError) <a href="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsInternalError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=9.00.3054.00" target="_blank">Get Online Help</a></li><ul>
<li>Could not find stored procedure 'GetOneConfigurationInfo'.</li>
</ul>
</ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span>
</body>
</html>
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------
View 4 Replies
View Related
Oct 11, 2007
I've noticed at least five other posts on the web with this problem with no solutions given. Seems there are MANY people with this particular problem--hint:Microsoft Pay Attention. Help!
When installing SP2 for SQL Server 2005 I get this error message:
MSI (s) (E0!68) [09:02:25:673]: Product: Microsoft SQL Server 2005 (64-bit) -- Error 29512. SQL Server Setup was unable add user OUR-LAN-DOMAINOUR-SERVICE-ACCOUNT to local group OUR-LAN-DOMAINSQLServer2005SQLAgentUser$OUR-DATABASE-SERVER-NAME$MSSQLSERVER.
The error message seems to contradict itself: it says "local group" which seems to me to mean the group on the database server itself YET the group name is prefixed with our LAN domain name. So which one is it?
Also, I'm not sure if this message means there is a problem in Active Directory or in the security model of SQL Server itself. I don't think it means SQL Server itself because I don't think SQL Server has groups... it only has Roles, right?
We looked in Active Directory and the user above does indeed exist in the domain-level group mentioned.
Please help!
View 9 Replies
View Related
Apr 23, 2008
Hi
I am trying to connect to SQL Server Managements Studio. However, I am encountering connection problems. Please help....
Error...
TITLE: Connect to Server
------------------------------
Cannot connect to MSSQL1.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Raj.
View 6 Replies
View Related
Jan 23, 2004
I have loaded NT4 onto a machine with 256MB's of ram. I have put on SP6 and the hard drive is 80GB's in size. I then loaded in SQL Server 6.5 and set up my default database at 250MB's in size. I can ping all other computers on the network and they can ping me but when I try to register the database it give me a unable to connect error. This is the 10004 error. The error is Execomm and it says the DBPROCESS is dead. I guess thats cause it won't connect. The Sqlserver is running and so is the sqlexecutive running.
Help, Help, Help.
TIA
View 4 Replies
View Related
Feb 8, 2006
I am getting the following error:
Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Also, I am running the Upgrade advisor from my machine (SQL 2000) and trying to access the SQL 2000 db on another machine. So I do not have SQL 2005 in any machine.
Can anyone tell me whts wrong.
Pls Advice!!
Thanks
View 3 Replies
View Related
Apr 29, 2008
Hi,
I am trying to connect to SQL Server through Query Analyzer but getting following error: (SQL Server is at remote web server where i have my website hosted.)
Unable to connect to server [server IP]:
Server: Msg 6, Level 16, State 1
[Microsoft][ODBC SQL Server Driver][dbnetlib] Specified SQL server not found.
I have searched this forum for this error and performed following workaround as suggested in some threads-
1. checked and set "TcpPort" registry setting.
2. TCP/IP is enabled in Network Utility.
3. "start SQL server if it is stoped" checkbox is unchecked while connecting.
But, I am still getting the above error. Should i re-installed SQL Server 2000? Any help?
Thanks,
View 3 Replies
View Related
Jul 23, 2005
MS SQL Server 2000 SP3Windows XP SP2Error when try to debug in Query Analyzer:Server: Msg 504, Level 16, State 1, Procedure sp_sdidebug, Line 1[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect todebugger on HORNET (Error = 0x80070005). Ensure that client-sidecomponents, such as SQLDBREG.EXE, are installed and registered onEUGENE. Debugging disabled for connection 63.Tried:- 'Troubleshooting the Transact-SQL Debugger' ( Book on-line )- EXEC ... 'legacy_on'- firewall is disabledWhat else can be done ?Thanks , Eugene
View 1 Replies
View Related
Jul 11, 2007
Hi to everyone!
Here is my problem: I have SQLEXPRESS running with Windows Authentication on a "server" PC named "ASUS1", and I need to connect from a "client" PC named "Presario1", user "Mauro", connected through a peer network (I use a cross-over cable); both PCs belongs to the same workgroup named "RMT-WORK", and they can see each others shared folders without problems.
I have installed the connectivity components + Management Studio Express on Presario1, and enabled named pipes and TCP/IP protocols; then I've got SQL Browser running. I have also added the Login "Guest" on ASUS1SQLEXPRESS.
When I start Management Studio Express on Presario1 and browse for servers I can select "ASUS1" as database engine but when I try to connect I receive "Error 40: could not open a connection to SQL Server" (same result using SQLCMD); I have tried to add on ASUS1SQLEXPRESS a user "Presario1Mauro" with "CREATE LOGIN [Presario1Mauro] FROM WINDOWS" but I receive a "Windows user not found" error...
Can anyone help me?
View 6 Replies
View Related
Apr 15, 2006
Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
View 2 Replies
View Related
Nov 18, 2006
SQL Express running on Server 2003 SP1, not a domain controller - but prior to installing SQL Express, I did dcpromo promote and then demoted it back to a workgroup server.
Connecting with Vista build 5600, Studio express 9.00.2047 with MDAC 6.00.5600.1638. Server 2003 MDAC is 2.82.1830.
I came across this article on the net:
http://www.developersdex.com/sql/message.asp?p=1867&ID=%3C309C7496-F36B-4398-9C52-322E6CB8DE3B%40microsoft.com%3E
Is my mis-matched versions of MDAC causing me this grief?
Otherwise, I have remote set up for TCP and Named Pipes, I've run sp_configure 'remote admin connections', 1; my login is set to SQL Authentication with everything granted. I've tried running the service as network, local and MachineAdministrator; ports are open per:
http://support.microsoft.com/kb/555585
I wanted to ask before I start replacing the MDAC on either the Vista or Server 2003 machine... If that's the problem, which version(s) do I change? to?
Full error message:
An error has occurred while establishing a connection to the server. While connecting to SQL Server 2005, this failure may be cuased by the fact that under the default settings SQL Server does not allow remote connecitons, (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 1326)
Thanks, John
View 7 Replies
View Related
Dec 20, 2006
First Error:
I am currently trying to get my reporting services to run on a site other than the default website... on my test server are three sites listed in my IIS: Default Web Site, Microsoft Share Point Administration, and Data Test Site.
My ReportingServer and Reports directories run fine in my Local Web Site but when i add the Directories to my Data Test Site only the Reports Directory runs... the ReportServer does not run and gives me :
You are not authorized to view this page
You might not have permission to view this directory or page using the credentials you supplied.
If you believe you should be able to view this directory or page, please try to contact the Web site by using any e-mail address or phone number that may be listed on the 192.168.1.249 home page.
You can click Search to look for information on the Internet.
HTTP Error 403 - Forbidden
Internet Explorer
Second Error:
I was trying to fix the problem above and i do not think i changed anything i was just looking through the settings between the two sites and somehow this error came up:
Error
The underlying connection was closed: Unable to connect to the remote server.
Home
I am not sure what i did or if i even did anything i was just looking through the settings. compairing the two sites and now i get the error above.
View 1 Replies
View Related
Jun 7, 2006
I am facing a problem in connecting to the local database with server name as (local).
I have installed SQL Server 2005 in my machine. When I try to connect to the SQL server with the server name as SUNILKUMAR I am able to connect but when I try to connect to the same server with the server name as (local) I am not able to connect. SUNILKUMAR is my machine name and SQL server is running locally.
if anyone can help me what is the problem in this case it is highly appriciated.
View 7 Replies
View Related
Jun 5, 2007
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
View 4 Replies
View Related
Sep 11, 2007
Hey Guys,
I have a SQL connection string question. In my web.config I don't know what to put for the server. I have SQL Server 2005 installed locally.
<connectionStrings><add name="database" providerName="System.Data.SqlClient" connectionString= "server=whatgoeshere?;database=test;uid=sa;pwd=password" /></connectionStrings>
I'm using VS 2005.
Thanks in advance.
-Marc
View 7 Replies
View Related
Nov 7, 2007
hi..
i am trying to run my asp project using my iis in winxp and installed a sql express 2005 and wheni try to connect using http://localhost/myproject i encounter this error
Microsoft OLE DB Provider for SQL Server (0x80004005)
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
am i missing some permission settings in sql express?
thanks
View 4 Replies
View Related
Sep 27, 2007
I saw a video on how its possible to create a local database so that when the application is being deployed, the mdf file will be deployed with it and will contain the enter data. The instructor(Beth Messi) showed that all I need to do is to add the .mdf file using the "Rightclick Project name in solution explorer > select add > add new item > then in the dialog that opens, select SQL database and click ok. I did this but the Visual Studio kept saying: "An error occored while extablishing a connection with the server. When connecting SQL Server 2005, this failure may have been caused by the fact that under the default settings of SQL Server does not allow remote connections. (Provider: Shared memory provider, error: 40 - could not open a connection to SQL Server)"
Honestly, I don't know how to go futher with this. The SQL server am using is the professional edition and I have been able to use it through Visual Studio to create Databases. It connects alright in that senario. Please I really need help here.
View 1 Replies
View Related
Apr 6, 2008
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK
Name: ReportServer1
Website: Default Web Site
ii) Report Manager Virtual Directory
Name: Reports1
Website: Default Web Site
iii) Windows Service Identity
Service name: ReportServer
Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup
Servername €“ Nameofmyserver
Database name - ReportServer1
Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
View 5 Replies
View Related
Sep 14, 2007
DBconn.cs
private DBConn() { // // TODO: åœ¨é€™è£¡åŠ å…¥å»ºæ§‹å‡½å¼?的程å¼?碼 // this.Server=Property.getProperty("DBServer"); this.port=int.Parse(Property.getProperty("DBPort")); this.User=Property.getProperty("DBUser"); this.Pwd=Property.getProperty("DBPwd"); this.db=Property.getProperty("DBDatabase"); this.ConnectionString="server=" + this.Server+","+this.port+";database="+this.db+";uid="+this.User+";pwd="+this.Pwd+";Connect Timeout=60"; }
--------------------------------------------------------------------------------------------------------
propetry.config
<property name="DBServer" value="127.0.0.1" /> <property name="DBPort" value="1433" /> <property name="DBDatabase" value="CSLC" /> <property name="DBUser" value="CSLCUser" /> <property name="DBPwd" value="resslc" />
I use this way to call my connecting string , but I can't connect to my local DataBase , I trid to modify the propetry.config to coneect to other DataBase on other Server it works
only when Connecting with my Local DataBase , it not work...
this problem have been troble me more than 3 weeks... ask many people no one can resolve this problem...
when I am at home . I can't work... because I can't connect to the Server when I'm in office..
pleaes help... thank you very much
View 9 Replies
View Related
Feb 7, 2008
Hello,
After restarting the machine, the sql 2000 won't start.
- I'm using local (no domain)
- administrator account
- sql agent is started, but cannot connect
a connection could not be establish to (local)
please verify the sql server is running and check your...
sql log below:
2008-02-07 11:34:53.04 server Microsoft SQL Server 2000 - 8.00.2039 (Intel X86)
May 3 2005 23:18:38
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-02-07 11:34:53.04 server Copyright (C) 1988-2002 Microsoft Corporation.
2008-02-07 11:34:53.04 server All rights reserved.
2008-02-07 11:34:53.04 server Server Process ID is 3088.
2008-02-07 11:34:53.04 server Logging SQL Server messages in file 'C:Arquivos de programasMicrosoft SQL ServerMSSQLlogERRORLOG'.
2008-02-07 11:34:53.06 server SQL Server is starting at priority class 'normal'(2 CPUs detected).
2008-02-07 11:34:53.14 server SQL Server configured for thread mode processing.
2008-02-07 11:34:53.17 server Using dynamic lock allocation. [2500] Lock Blocks, [5000] Lock Owner Blocks.
2008-02-07 11:34:53.17 server Attempting to initialize Distributed Transaction Coordinator.
2008-02-07 11:34:55.21 spid4 Starting up database 'master'.
2008-02-07 11:34:55.48 spid4 Server name is 'SUPORTE_SERVER'.
2008-02-07 11:34:55.48 spid4 Skipping startup of clean database id 23
2008-02-07 11:34:55.48 spid4 Skipping startup of clean database id 31
2008-02-07 11:34:55.48 spid4 Skipping startup of clean database id 32
2008-02-07 11:34:55.48 spid4 Skipping startup of clean database id 34
2008-02-07 11:34:55.48 spid5 Starting up database 'msdb'.
2008-02-07 11:34:55.48 server Using 'SSNETLIB.DLL' version '8.0.2039'.
2008-02-07 11:34:55.48 spid6 Starting up database 'model'.
2008-02-07 11:34:55.49 spid8 Starting up database 'pubs'.
2008-02-07 11:34:55.49 spid10 Starting up database 'Northwind'.
2008-02-07 11:34:55.49 spid11 Starting up database 'Umuarama'.
2008-02-07 11:34:55.49 server SQL server listening on 192.168.0.101: 1433.
2008-02-07 11:34:55.51 server SQL server listening on 127.0.0.1: 1433.
2008-02-07 11:34:55.51 spid12 Starting up database 'adm_clube'.
2008-02-07 11:34:55.51 spid13 Starting up database 'Geracao'.
2008-02-07 11:34:55.51 spid14 Starting up database 'Sim_Externo'.
2008-02-07 11:34:55.51 spid15 Starting up database 'OPEN'.
2008-02-07 11:34:55.53 server SQL server listening on TCP, Shared Memory, Named Pipes.
2008-02-07 11:34:55.53 server SQL Server is ready for client connections
2008-02-07 11:34:56.25 spid6 Error: 9003, Severity: 20, State: 1
2008-02-07 11:34:56.25 spid6 The LSN (5:348:1) passed to log scan in database 'model' is invalid..
2008-02-07 11:34:56.84 spid10 Starting up database 'SISCONTACOR'.
Thanks
View 6 Replies
View Related
Jan 29, 2008
I have just recently installed MS SQL Server 2005 Developer edition. I have installed SP2.
Today when I try to connect via Management Studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
I installed it as a default instance.
I recently added a login with dbo privileges. I have tried logging in with that sql account and also with windows authentication to no avail.
Thank you for any help.
View 2 Replies
View Related
Nov 29, 2007
Hello,
I am unable to connect to my local sql server express db. I would like to test my app and its not connecting.
It works when I use windows authtentication Trusted_Connection=yes
but not when i use: user id=sdvaid; password=sdavid
Const connectionString = "Data Source=SDAVIDSQLEXPRESS;Initial Catalog=intranet;user id=sdavid;password=sdavid"
Dim conn As SqlConnection = New SqlConnection(connectionString)
Dim cmd As SqlCommand = New SqlCommand("select * from Users", conn)
cmd.CommandType = CommandType.Text
Try
conn.Open()
cmd.ExecuteNonQuery()
Catch ex As Exception
Response.Write(ex.ToString())
Finally
conn.Close()
End Try
thanks.
Here is the error: "SQL Server does not exist or access denied."
Please advise...
View 4 Replies
View Related
Apr 12, 2007
This error message gets into my SQL Agent Error Logs every couple of seconds after the clusters migrated from the EMC Clariion CX500 to the CX3-80.
OS €“ Win 2003
SQL €“ SQL Server 2005 SP1 (9.00.2047.00)
View 3 Replies
View Related
Sep 14, 2006
I have a page that connects to SQL server. It works fine when running in local host but when I publish to the server, I get the following: An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Any ideas on where to start? Thanks,Mark
View 1 Replies
View Related
Apr 18, 2007
I have a SQL Server 2005 instance which resides on a dedicated server hosted by a third party. I am able to connect to this server through my local SQL Management Studio, however, my local ASP.NET 2.0 web application cannot connect. I get the error below. The connection string I use is formatted as...
Connection String:
Server=thesever;uid=myuserid;pwd=mypassword;database=mydatabase
Error:
Failed to connect to database: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
The hosting providr claims that the SQL Server configuration settings are as they should be as fars as TCP/IP and Named Pipes are concerned. Does anyone know what might be going on?
View 1 Replies
View Related
Nov 26, 2007
Hello, I need help to connect to my local sql express db in visual studio 2003 in vb.It currently works with the production db information and I need to test a few things, So i'd like to point it to the local db.It works this way:Const CONN_STRING = "server=johndoe;user id=john;password=doe;database=johnd"Dim conn As SqlConnection = New SqlConnection(Me.CONN_STRING)conn.Open()I want to point it to my local db and it doesn't connect. Dim connectionString As String = "Data Source={myusernameSQLEXPRESS};Initial Catalog=johnd;Trusted_Connection=yes" Dim conn As SqlConnection = New SqlConnection(connectionString) Try conn.Open() Catch ex As Exception Response.Write(ex.ToString()) End Tryand even that doesn't work.When i go to my sql server 2005, it saysMYUSERNAMESQLEXPRESS (SQL SERVER 9.0.3042 - theworknetworkmyusernamewhat am i doing wrong ?Thanks.
View 7 Replies
View Related
Jan 14, 2004
i have problems connecting to the local server on my laptop. i ahve used the following code but it gives me an error saying login flaied for user "sa" or "sekhar".
i tried using the username and password i use to log onto my computer. but it doesnt work.
can anyone tell me how to do it?
the code is typed is
connection = new sqlconnection("server=localhost;uid=sekhar;pwd=sekhar;database=chandu")
........................
......................................
...............................
connection.open()..................i have all the next statements correct.
my username is sekhar and the password is sekhar too but it gives me an error.
somebody help me
Thank you
sekhar
View 1 Replies
View Related
