I have two different sql servers one two different domains connected by internet. Iam working on Doman-A. Both sql server's are 2005
Domain Name System Name Sql Instance Name Port No
Domain-A SysA(IP:202.187.65.124) SqlA 1215
Domain-B SysB(IP:102.45.68.125) SqlB 1465
Intially I was unable to connect from SysA to SysB through sql management studio. But after giving the connection string as 102.45.68.125SqlB,1465 I was able to connect. Now my main problem is with the replication only. I had configured Publisher and Distrbutor on SysA. I want the subscriber to be SysB. But when I try to configure the subscription in the New Subscription Wizard from SSMS installed on SysA and try to Configure the subscription I get the following error message:
TITLE: New Subscription Wizard
------------------------------
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SysBSqlB'. (Replication.Utilities)
I'm trying to set up a transactional replication from SQl Server 2005 to SQl server 2000. The Distributor and the publisher are on our server and the subscription is supposed to be on a SQL 2000 server on a different location. Before upgrading to 2005 I didn't have problems - the replication from 2000 to 2000 was working perfectly.
After I succesfully created the distributor and the publication the first problem that I encountered was that when I tried to create the subscription it was giving me an error that I cannot use an IP to acces the server. I realized to fix that issue by creating an Alias in the SQL Server Configuration Manager for the server where I wanted to create the subscription (a push subscription).
Now when I try to add the subscriber it gives me another message "Execute permission denied on object 'sp_MS_replication_installed', database 'master', owner 'dbo'" - so I cannot create the subscriber.
The user that I use to create the subscriber on the 2000 server is dbo for the subscriber database but it doesn't have rights on the master database. Also I realized that on the 2000 server I still have the old subscription but I cannot delete it - for the same reason - no access on the master database. Before upgrading to 2005 I had the exact same rights on the 2000 server.
I have a merge replication in place. I increased the identity_range to 100000 for a table. I have done this both ways, via the properties of the publication on SSMS, and via TSQL. I have call sp_adjustpublisheridentityrange. Then I recreated the sanpshot.  EXEC sp_adjustpublisheridentityrange @table_name = N'Label', @table_owner = N'caseup';but after synchronization, the range defined in the table's constraint has not changed and now all of the identity values are used up. All inserts are failing.What needs to be done to force the publisher to recreate the identity range on a subscriber(s).
I have the same database(3GB) in 2 physical locations in usa and europe
I need to create a publisher and subscriber between these 2 database without sending any snapshot because i have the same data in the 2 sides, is it possible ?
Hi, I need urgent help with this problem because I am unable to do any database development due to it. I am using visual web developer express edition with sql server 2005 express edition. The problem is that when I try to create a database in the app_data folder I get the following error message: "Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed". Regards, sandy
I'm running SQL Server 2002 and trying to create a User Defined Function. However, everytime I try to save the script I get Error 170 Incorrect Syntax near 'FUNCTION'.
This happens if I create the Function from Code or use the Enterprise Manager. I'm logged in with 'sa' privs, so I don't think it's a privilege issue. I'm well confused.
I was asked to import some data from excel into a table within a sqlserver 2000 db the import was complaining about an index so then I deleted the index imported the data succesfilly but I'm now unable to re create the index, please see the error that I'm getting below. Can someone please help. Thanks
- Unable to create index 'trainingGo'. ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]CREATE UNIQUE INDEX terminated because a duplicate key was found for index ID 32. Most significant primary key is '439'. [Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.
I had a fully functioning SQL 2005 Exp install until today. All of my DBs work, Reporting Services works. But today I went to add a new DB for a DotNetNuke installation. Everything I have tried fails with the same error:
***************************************************** TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Create failed for Database 'TEST'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------ A file activation error occurred. The physical file name 'G:TEST.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation. CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5105) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=5105&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ *****************************************************
I have looked high and low for a solution only to come up empty handed. I only hope at this moment that someone here has seen this before.
Hi. I get this error when i try to create a relationship in a db diagram (sql 2005) "'tblActivedir' table saved successfully 'tblClient' table - Unable to create relationship 'FK_tblClient_tblActivedir1'. Introducing FOREIGN KEY constraint 'FK_tblClient_tblActivedir1' on table 'tblClient' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints. Could not create constraint. See previous errors."
What i have is 2 tables. 1 named client 1 named activedir
In the client table the columns i want to bind with activedirtable are FR1 and DC1 I want to bind them in the ID of the activedir table (both, in different fk relationships) so that they get the id of activedir. Fr1 has an fk relationship with activedir (pk is activedir' id) and DC1 exactly the same in another fk. So i want both columns to comunicate with activedir. If p.e. activedir has 3 elements (a,b,c) when i delete element a then werever FR1 or DC1 have this element(binded to it's id) then the element will also be deleted (id of the element) from both FR1 and DC1 I don't want to set Delete and Update action to none because i want the element changed or deleted from activedir, to do the same on Fr1 or DC1 or both. Any help? Thanks.
I need to create a new web site in Internet Information Service.
This can be done by opening IIS manager.
In IIS Manager, expand the local computer, right-click the Web Sites folder, point to New, and then click Web Site. The Web Site Creation Wizard appears.
But if i right click the Web Site Folder. only Properties and Refresh option is showing.New option is not shown.
I will appreciate if any one give solution to solve this problem.
I've recently installed VB Express and SQL Server Express (including Management Studio Express) on a laptop as well as a desktop PC. Everything looks the same on both. I can create an SQL database from VB without any problems on my laptop. However, when I try to create a new SQL database from VB on my desktop, I get the following message:
"Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed."
I've written a number of databases in Access, but never used SQL Server. This is about to drive my crazy.
Hello, I just recently installed SQL Express 2005 on a new OS which is on Vista Ultimate. When I try to attach a database by clicking the add button, I receive this error: =================================== Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476 ------------------------------Program Location: at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.SqlManagerUI.BrowseFolderHelper.GetBrowseStartPath(ISettingsStorage settingsStorage, ServerConnection serverConnection, Type controlType, String settingKey) at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.GetStartPath(String settingName) at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.buttonBrowse_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) =================================== An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------Program Location: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecuteSql.ExecuteImmediate(String query) at Microsoft.SqlServer.Management.Smo.ExecuteSql.GetDataProvider(StringCollection query, Object con, StatementBuilder sb, RetriveMode rm) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.FillData(ResultType resultType, StringCollection sql, Object connectionInfo, StatementBuilder sb) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.FillDataWithUseFailure(SqlEnumResult sqlresult, ResultType resultType) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.BuildResult(EnumResult result) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.GetData(EnumResult erParent) at Microsoft.SqlServer.Management.Smo.Environment.GetData() at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci) at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request) =================================== The server principal "MyComputerKarl" is not able to access the database "model" under the current security context. (.Net SqlClient Data Provider) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=916&LinkId=20476 ------------------------------Server Name: MyComputerSQLEXPRESSError Number: 916Severity: 14State: 1Line Number: 1 ------------------------------Program Location: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
When I try to creat a new database I receive this error: =================================== Create failed for Database 'TestDB'. (Microsoft.SqlServer.Express.Smo) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476 ------------------------------Program Location: at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl() at Microsoft.SqlServer.Management.Smo.Database.Create() at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabaseData.DatabasePrototype.ApplyChanges(Control marshallingControl) at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabase.DoPreProcessExecution(RunType runType, ExecutionMode& executionResult) at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.DoPreProcessExecutionAndRunViews(RunType runType) at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.ExecuteForSql(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult) at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.Microsoft.SqlServer.Management.SqlMgmt.IExecutionAwareSqlControlCollection.PreProcessExecution(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult) at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.RunNow(RunType runType, Object sender) =================================== An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------Program Location: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries) at Microsoft.SqlServer.Management.Smo.SqlSmoObject.ExecuteNonQuery(StringCollection queries, Boolean includeDbContext) at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImplFinish(StringCollection createQuery, ScriptingOptions so) at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl() =================================== CREATE DATABASE permission denied in database 'master'. (.Net SqlClient Data Provider) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=262&LinkId=20476 ------------------------------Server Name: MyComputerSQLEXPRESSError Number: 262Severity: 14State: 1Line Number: 1 ------------------------------Program Location: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) On my previous computer which had WinXp Pro I had no such problems Any Help would be much appreciated Thanks Karl
I tried to create a stored procedure but instead of opening up to a new stored procedure it displays an exist stored procedure. I erased the code and typed in my code now i received this error message.
MS SQL-DMO (ODBC SQLState:42000) Error 2729: Procedure ‘spUpdate_date_time’ group number 1 already exists in the database. Choose another procedure name
I just started having an issue with maintenance tasks. When I click on one of my jobs to modify it I get the following error. Also I am unable to create a new task unless I use the wizard? Could not load file or assembly 'msddsp, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design)
Program Location:
at Microsoft.DataTransformationServices.Design.DtsComponentDiagram.CreateDdsView(Control parentControl) at Microsoft.DataWarehouse.Controls.DdsDiagramHostControl.set_ComponentDiagram(ComponentDiagram value) at Microsoft.DataTransformationServices.Design.DbMaintSequenceDesigner.get_DbMaintDiagramHost()
I am a complete newbie here. I have spent hours trying to create a database - (even installed on XP and Vista) and I seem to not be able to create a database - it tells me that:
Create Database permission denied in database master - Microsoft SQL Server Error 262.
How to I enable these priviledges?
Do i need to regsiter the Server with the Enterprise Manager and how do I do that?
I am running SQLServer 2000 SP3 with MDAC 2.8.On instances created via MSDE, I am unable to create the first step ina job. Instances created with SQLServer 2000, this problem does notoccur.The message I am receiving on the instances created with MSDE, themessage I get immediately upon pressing the Add button to define a stepis "Error 170: Line 1: Incorrect syntax near ''"Any help would would be greatly appreciated.Wardell Castles
Hi, I'm working with few examples from a 70-315 exam prep book. I'm trying to view the Table design... edit/ create views from VS. NET environment. But when i right click on the View node under Data Connection tree i get only "Refresh" & "Properties". According to this book.. i should be able to create new views from here. I'm working with a SQL Server 2000 local installation. VS .NET is connected to the DB, as i tried other examples and i'm able to read from the DB. My SQL server installation is a 120 days eval installation... has this got anything to do with the behavior ?? I also reied to establish a connection with SQL server 'sa' login... i could connect, but again i wasnt able to create 'views' access tables design. Any help would be appreciated.
I am using visual web developer with sqlserver2005 express edition. When I try to create a database in the App_Data folder through solution explorer I get the following error message: Failed to generate a user instance of Sql Server due to a failure in starting the process for the user instance. The connection will be closed. I am unable to create the database. Can anyone help in solving this problem? Regards, Sandy
HELP! I'm new to SQL Server and I'm sure this is a simple problem. But I can't seem to solve it. Here's the problem: My website & MS SQL 2000 Server are being hosted by Networksolutions. Thru the Client Enterprise Manager I am Unable to create a New Table. This is the error message I get: " [MS Design Tools]-ODBC error: [Microsoft] [ODBC SQL SERVER DRIVER] [SQL SERVER] SELECT permission denied on object 'sysobjects', database 'namedb', owner'db' " :confused:
I used SQL Server 2012 Management Studio to create a new table on an 2014 SQL Server instance and got this message: 'This backend version is not supported to design database diagrams or tables'. Does this mean that I have to have SQL Server 2014 Management Studio to create a table on a SQL Server 2014 instance?
Hope this is the right forum - apologies if its not. I'm a newbie. I'm at my wits end as I cant create a full-text catalog in SQL server 2000. Let me explain (I'll try and include as much info as I can):-
When I run the following command: sp_fulltext_catalog 'Cat_Desc', 'create'
I get the following error mesaage:
Server: Msg 7619, Level 16, State 2, Procedure sp_fulltext_catalog, Line 64 The specified object cannot be found. Specify the name of an existing object.
I in as user sa. I determine this from running: select suser_sname()
The SQL Server instance is running under user: LocalSystem I determine this from the following command:
Hello,I am attempting to send emails using T-SQL (in a SQLServerAgent Job)using the stored procedure sp_SendSMTPMail. I created the stored procusing the following script that I got off a post here on google.CREATE PROCEDURE sp_SendSMTPMail (@From varchar(255),@To varchar(8000),@Subject varchar(255),@Body varchar(8000),@cc varchar(8000) = NULL,@Bcc varchar(8000) = NULL)ASDECLARE @newmail intDECLARE @result int-- Create the CDONTS.Newmail objectEXEC @result = sp_OACreate 'CDONTS.NewMail', @newmail OUTIF @result <> 0BEGINPRINT 'Error creating object'EXEC sp_displayoaerrorinfo @newmail, @resultRETURNEND-- Check the Optional PropertiesIF not @cc = NULLBEGINEXEC @result = sp_OASetProperty @newmail, 'cc', @ccIF @result <> 0BEGINPRINT 'Error setting [cc] property'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDENDIF not @Bcc = NULLBEGINEXEC @result = sp_OASetProperty @newmail, 'Bcc', @BccIF @result <> 0BEGINPRINT 'Error setting [Bcc] property'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDEND--set the non-optional propertiesEXEC @result = sp_OASetProperty @newmail, 'From', @FromEXEC @result = sp_OASetProperty @newmail, 'To', @ToEXEC @result = sp_OASetProperty @newmail, 'Subject', @SubjectEXEC @result = sp_OASetProperty @newmail, 'Body', @Body-- Send the message...EXEC @result = sp_OAMethod @newmail, 'Send'IF @result <> 0BEGINPRINT 'Error sending message'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNEND-- Destroy the object.EXEC @result = sp_OADestroy @newmailIF @result <> 0BEGINPRINT'Error destroying object'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDGO______________________________________________This worked perfectly in testing at our office but when we shipped tothe client it produced the error 'Error creating object'. We sent theclient the script to create the sp_displayoaerrorinfo proc and got thefollowing error message.Error creating object-2147221005OLE Automation Error InformationHRESULT: 0x800401f3Source: ODSOLE Extended ProcedureDescription: Invalid class stringNow this suggested to me that the for some reason we were unable toreference the CDO library, or it wasn't installed. However they haveOutlook 2000 installed with CDO installed with it. I've had had themremove and reinstall the CDO library but that hasn't helped.Other thing I though of was a permission type problem. They are usingNT authentication for there logins into SQL server and are logged onthe server as Administrator who I would assume has all requiredpermissions.Any suggestions for either determining the cause of them problems or asolution?Thanks in advance.Bob.
I've installed with success Visual Studio 2005 team edition for software developers and SQL SQL Server standard edition, but when I've created a new IS project and click on "No Data flow tasks have beed added to this package. click here to add a new DataFlow task"
I receive the following message :
Registration information about the Data Flow task could not be retrieved. Confirm that this task is installed properly on the computer.
Could not enumerate the registered tasks. (Microsoft.DataTransformationServices.Design)
Does someone experience this before ? is there any work around ?
Dear All- i am facing a problem with them creation of the execution Snapshot for my report
simply when i try to create a one and after choose the schedule setting and i press OK to finish an error appear mention "The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. (rsInvalidDataSourceCredentialSetting) (Report Services SOAP Proxy Source)"
i like to mention also i choose the datasource credentials is the redio button Windos integrated security and also the reporting services and the database are exit on the same machine
i hope someone help soon as our work is affected due to this issue
I have a query that seems to take a while to execute and I'm looking into using an indexed view to see if this helps. I use the script below to create the view but when I query it's indexability using:
Here is a very cut down version of the view, only selects the uid! from a single table
IF OBJECT_ID ('GetMessageQueueDetails', 'view') IS NOT NULL
DROP VIEW GetMessageQueueDetails ;
GO
IF sessionproperty('ARITHABORT') = 0 SET ARITHABORT ON
IF sessionproperty('CONCAT_NULL_YIELDS_NULL') = 0 SET CONCAT_NULL_YIELDS_NULL ON
IF sessionproperty('QUOTED_IDENTIFIER') = 0 SET QUOTED_IDENTIFIER ON
IF sessionproperty('ANSI_NULLS') = 0 SET ANSI_NULLS ON
IF sessionproperty('ANSI_PADDING') = 0 SET ANSI_PADDING ON
IF sessionproperty('ANSI_WARNINGS') = 0 SET ANSI_WARNINGS ON
IF sessionproperty('NUMERIC_ROUNDABORT') = 1 SET NUMERIC_ROUNDABORT OFF
GO
CREATE VIEW GetMessageQueueDetails
WITH SCHEMABINDING
AS
SELECT Uid
FROM dbo.MyTable
GO
I see from See http://msdn.microsoft.com/en-us/library/aa933148(SQL.80).aspx that the pre-requsites for indexed views are pretty strict, I have been through this list and think I have everything covered, except for :
"The ANSI_NULLS option must have been set to ON for the execution of all CREATE TABLE statements that create tables referenced by the view."
Is there an easy way to find out if ANSI_NULLS was ON or OFF when the table was created. If it was OFF can I do an ALTER TABLE to turn it on and will that make the view indexable? If so how do I do this with out trashing the data in the table?
In SQL Server Management Studio, in Object Explorer, expand the (local) computer node.
Right-click the Replication folder, and then choose Configure Web Synchronization
There is no option when Right-clicking the Replication folder under my local server, however there IS an option for Configuring Web Synchronization on the Replication folder under SQL Server Mobile. (Unfortunately the Configure the publication for Web Synchronization is listed BEFORE the SQLServer Mobile Task, so it is pretty confusing) So, assuming this is what the author meant, I successfully configured the Web Server and the SQLMobile shows under my default web site.
When I attempt to create a Subscription under SQLServer Mobile, I get the following error:
Am I missing something? Should the web configuration be done on my local SQL Server, not the SQLServer Mobile replication directory? If so, how come I do not have that option as suggested in the directions?
I have checked and rechecked permissions. As I mentioned, the snapshot is successfully created (verified by Right-clicking the publication and viewing the snapshot agent status)
My system config is VISTA Ultimate, Visual Studio 2005 SP1, SQL SEVER 2005 SP2. Using 2005 SQL Server Management Studio I am unable to create a servername/aspnet login account. I right click logins and get the new login form; key ASPNET Login Name; select Windows Authentication; click search; I get the Select User or Group form; under object type I select all three; location I select my server name; if I enter SERVERNAME/ASPNET and click Check Names I get an error; if I click Advanced and Find Now; ASPNET is not listed in Name(RDN) list. I tried aspnet_sql.exe -E -A all; that did not work. Where can I find information on creating an ASPNET Login after experiencing the above problems?
I`m trying to setup our sql2000 sp3a sql server as a Publisher.When i use the wizard to config Publishing and Distribution wizard. I recieve the following error:
Sql Enterprise manager could not configure server as the distributor. Error 14133 Could not execute instdist.sql. Check instdist.out in the install directory.
I`ve checked the install directory and cannot find the file instdist.out file. I assume that it failed before completeing this stage.
Has anyone come across this error before and any ideas on how to resolve would be appreciated. Thanks in Advance,
I have recently installed Microsoft SQL Server 2005 Express. The installation seemed to go OK (Dell Optiplex I86, Win2K).
The SQL Server Management Studio Express (also installed OK) appears to connect to the database server and shows the database tree as I would expect, consisting of Databases, Security, Server Objects, Replication, and Management.
However, when I attempt to create a new data source (Control Panel->Administrative Tools->Data Sources(ODBC ->ODBC Data Source Administrator -> Add->SQL Server)
Name: MYSQLS1
Descr: Test SQL Server
Server: (local)
(Next->)
x With Windows NT Authentication using the network login ID
[Client Configuration]
Server Alias: MYSQLS1
Server Name: MYSQLS1
x TCP/TP
x Dynamically determine port [1433]
(Next->)
RESULT:
Connection failed: SQLState: '01000' SQL Server Error: 11001 [Microsoft][ODC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(Connect()). Connection failed: SQLState: '08001' SQL Server Error: 6 [Microsoft][ODC SQL Server Driver][Shared Memory]Specified SQL Server not found.
Can anyone please tell me what's going on here ? What am I doing wrong?
