Unable To Decrypt With Restored Certificate

Jan 6, 2014

I submitted the following T-SQL:

--BACKUP CERTIFICATE EncryptTestCert
-- TO FILE = N'c:backupEncryptTestCert.cer'
-- WITH PRIVATE KEY
-- ( FILE = N'c:backupEncryptTestCert.pvk',
-- ENCRYPTION BY PASSWORD = N'T0yp0calypse'
-- )

[Code] .....

However, the return data just contains nulls, instead of the original decrypted data. You can see above that I deleted the certificate, but then restored the certificate from backup. However, it doesn't work.

View 2 Replies

Unable To Connect Server After Master DB Restored

Oct 25, 2014

I have restored the master db in single user mode.

Processed 440 pages for database 'master', file 'master' on file 1.
Processed 3 pages for database 'master', file 'mastlog' on file 1.
The master database has been successfully restored. Shutting down SQL Server.
SQL Server is terminating this process.

I removed single user mode parameter(-m;)..When I start SQL Server in configuration manager getting below error .The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details

View 7 Replies View Related

Reporting Services :: Unable To Bind A New Certificate In SSRS 2008 R2

Feb 22, 2011

I've had a SSL wildcard certificate successfully in use, unless it had to be replaced because of its age. Now I've imported a new certificate, but unfortunately I'm unable to set it up in the SSRS Configuration Manager Console (Web Service URL / Report Manager URL), because "We were unable to create the certificate binding".

Here is the Error Message:

Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 80070520
---> System.Runtime.InteropServices.COMException (0x80070520): A specified logon session does not exist. It may already have been terminated. (Exception from HRESULT: 0x80070520)
--- End of inner exception stack trace ---

I've also deleted the existing bond in the netsh console with "netsh>http delete sslcert ipport=0.0.0.0:443", but this still doesn't fix the issue.

View 3 Replies View Related

SQL Security :: Unable To Initialize SSL Encryption Because A Valid Certificate Could Not Be Found

Nov 19, 2015

We are unable to login in database due to “The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x80090331. Check certificates to make sure they are valid. Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.”we have tried to run that selfssl.exe from command prompt followed by below command and am getting the cryptographic error.

View 3 Replies View Related

Service Broker Not Working For Restored Databases (SQL 2000 Databases Restored On 2005)

Jan 24, 2006

I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.

When i tried the sample on a newly created database it worked fine.

Is there any solution to make the restored database to work for service broker.

Thanks

Prashanth

View 3 Replies View Related

Certificate Loading Issue - When Creating Certificate From SQL Server To SQL Server Express On The Same Machine

Jun 29, 2007

Hi, We are trying to implement Service Broker between SQL Server Express and SQL Server on the Same machine and we are having problems with certificates. We are creating a certificate on SQL Server, backing up the certificate on a file system and then loading certificate on the SQL Server Express from the file and we are keep getting the following error: Msg 15208, Level 16, State 1, Line 1 The certificate, asymmetric key, or private key file does not exist or has invalid format.

Following script runs fine on SQL Server.

Code Snippet

use master

Create Master Key Encryption BY Password = '45Gme*3^&fwu';

BACKUP MASTER KEY TO FILE = 'C:ServiceBrokerPrivateKeyMasterB.pvk'

ENCRYPTION BY PASSWORD = '45Gme*3^&fwu'

Create Certificate EndPointCertificateC

WITH Subject = 'C.Server.Local',

START_DATE = '06/01/2006',

EXPIRY_DATE = '01/01/2008'

ACTIVE FOR BEGIN_DIALOG = ON;

BACKUP CERTIFICATE EndPointCertificateC

TO FILE = 'C:ServiceBrokerEndPointCertificateC.cer'

Following script runs on SQL Server Express:

Code Snippet

Create Certificate EndPointCertificateC

From FILE = 'C:ServiceBrokerEndPointCertificateC.cer'

WITH PRIVATE KEY (

FILE = 'C:ServiceBrokerPrivateKeyMasterB.pvk',

DECRYPTION BY PASSWORD = '45Gme*3^&fwu'

);

If we run the script other way around, it works fine. If we use the SQL Server on some other machine, the script works fine. But only on the same machine, it throws this error. We made sure the permissions and everything. Let us know if there is any work around or what are we doing wrong.

Any help is appreciated. Thank you,

View 4 Replies View Related

Restored Failed

Dec 6, 2007

Hi,

Can someone help me, I have this DB that needs to be restored. I have the full backup and the differential backup.
When I'm trying to restore my differential backup it prompts me this error "System.Data.SqlClient.SqlError: The log or differential backup cannot be restored because no files are ready to rollforward. (Microsoft.SqlServer.Smo)".
Then I try to create a test DB and restore my full backup there, it was succesfully restored and now try to restore my differential backup since I need the newest backup I received that error. I have already used the option leave the database non-operational but still the same.

Thanks.

Russell

View 10 Replies View Related

Could Someone Decrypt This?

Jul 23, 2007

hi all,
i have this password column that i ve no idea how it's been encrypted... i need to come out with encrypt and decrypt function for this string :-
AE435A2BE08D1797362FF3CDD6E541AA6851819C

is it possible to decrypt this when i dont have the password string? if not possible then i will try to get the password string so that any experts here could help me to come out with the encryption and decryption function.

thanks guys

~~~Focus on problem, not solution ¯(º_o)/¯ ~~~

View 20 Replies View Related

Decrypt

Aug 29, 2007

Hi,
When I run the package it gives the following error warning.
Not sure how and where to fix this.
P.S. The package runs successfully and loads data but not sure why I get this error.
Thanks

Error: 2007-08-29 06:00:13.70
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that
the correct key is available.
End Error

View 3 Replies View Related

Switching Off Replication For A Restored DB

Oct 19, 2000

Hi

If I dump a replicated Db and restore it onto another DB, how do I switch off replication from the restored DB. I believe there were some scripts developed for this in 6.5.

Any suggestions will be appreciated.

Rich

View 1 Replies View Related

SQL Server 7 Security After DB Have Been Restored

Jun 3, 1999

I have 2 SQL Servers 7.

DBs on the first were upgraded from 6.5.

A DB has 2 users: dbo + user1. User1 is also uses user1 login
I created a DB backup on the first server copied it on the second & restored on the second into existing DB.
The problem is that after that user1 is not in the list of the restored DB on the second server & I can not
include it in the DB & grant access to user1 login to the same DB
and error message is
"15023 User or role "user1" already in exists in the current DB.

View 1 Replies View Related

Restored A SQL DB But It Did Not Restore Users

Mar 1, 2001

Hello,

Im running SQL 7.0 in production with no SQL service pack applied. I am trying to copy the database over to a test box running SQL 7.0 SP3. Both servers are NT 4.0 with SP6.1a. When I restore the database on the test box, I do not get the Users restored but I do get the Tables and other items. The SQL backup Im restoring from is a complete backup. Could the fact that the server Im restoring on is SQL 7.0 SP3 and it came from a pure SQL 7.0 server?

Thanks

View 2 Replies View Related

Dump Of SQL Db Is Restored To A Different SQL Server

Oct 19, 2001

Hello,
Is it possible to use a dump from a database to do a restore of a db on a different server?

I have a SQL 2000 server and having been given a file called test.dmp (I am not sure what SQL version this is). Can I use this to do a restore to a new db I have created on my server? If so what method do I use?

Thanks
reorg

View 1 Replies View Related

Do System Databases Need To Be Restored?

Sep 11, 2007

The consultant hired as our Remote DBA for SQL Server 2005 recently changed the recovery model on our user database from Full to Simple. He explained this was necessary because the transaction log was growing very large and backing up the database when the model was set to Full was not shrinking it. Now, the master database and the msdb database are backed up daily along with our user database.

When we need to restore our user database, do we need to restore the master database and the msdb database too? What order should the databases be restored in?

View 13 Replies View Related

SQL 2000 DB Restored On A SQL 2005

Oct 17, 2007

Greetings!

I'm wondering if a db from an sql server 2000 restored on a sql 2005 server will use algoritms from sql 2000 or sql 2005. It seams to work quite well with a few exceptions, it's only for test anyway.

I'm sorry if this has been asked before but I could not see it.

Thanks
IceDread

View 6 Replies View Related

Database Restored, Publications Gone

Apr 20, 2006

hi all,

our datbase was restore but the publications were all gone.

however replication monitor shows publication and subscription.

worst. can create the publication with the same name because

it raises an error saying that it can't drop publication becuase

there is a subscription in it.

how can i remove the publication when the are already gone in the publication

folder but exist in the replication monitor

thanks for the help

View 4 Replies View Related

RC4 Encrypt And Decrypt

Jul 22, 2002

Hi Guys.

I am looking for TSQL code for RC4 encryption and decryption.

I found VBcode for RC4 encryption, it will take atleast 2 days for me to go thru that and rewrite the whole code in SQL.

If anyone has the code, please provide me.

(I know sql does accept extended ASCII characters)

Thanks
-MAK

View 1 Replies View Related

PGP Decrypt In DTS Routine

Dec 12, 2005

Does anyone know how to decrypt a PGP encrypted file in a DTS routine?

Thanks.
Danielle

View 4 Replies View Related

Encrypt On CLR Decrypt In SQL?

Jan 8, 2008

Hi folks,
I'm trying to encrypt a small token of data on my client c# application and have it decrypted by SQL on the server side, the problem is i cannot find articles on the subject. I don;t really want to get involved with certificates but base the system on a simple symmetric key that is shared by both parties.

I'm attempting to use the TRIPLE_DES algorithm on both sides and thus far have used the decryptbypassphrase on the server side with the data encrypted on the client side by .Net with no initialization vector setup.

If anyone can recommend any articles or have example (client and server side) code for this situation it would be greatly appreciated.

Many thanks in advance

Simon

View 10 Replies View Related

Encrypt In .net, Decrypt In Sql

Feb 29, 2008

Does anyone know what my .net app guys need to share with me if encryption was done in the .net app but decryption needs to occur in certain sql queries? I read about master keys, certificates, symmeteric keys, algorithms etc but dont know how that stuff would carry over from the framework into sql. All I know is that the algorithm is AES_256, they must be adding authentication to the encryption and i know the hash algorithm, and symmetric keys are involved. Will they be sharing certain kinds of files with me that need to be registered in the db? Will I have to use CLR if I want the two worlds to come together?

View 4 Replies View Related

2000 Database Restored To 2005

Jan 20, 2006

Is there a way to restore a 2000 database to 2005?
will the restore process convert automatically to 2005?

View 1 Replies View Related

Oracle .dmp File Restored To Sql Server

Aug 15, 2007

Hey Guys,

I have a .dmp backup file from an oracle database. I want to restore it into an sql server database. Can this be done?

View 2 Replies View Related

Backup File Database Was Restored From

Feb 5, 2008

Hello!

I am trying to find out name of the backup file database was restored from (I am restoring from DISK), something similar to physical_device_name in backupmediafamily. restorehistory doesn't have this information.
Any advice is greatly appreciated.

Thanks,
Igor

View 3 Replies View Related

Object Permissions On Restored Database

Dec 7, 2007

Hi,

I have recently restored a backup of a SQL Server 2000 Database (from my production server �� which is a shared hosting service) on my dev machine so I can do some testing. The issue I am having is with the permission of objects. Some of the objects were created with the dbo user and some with another login (myLogin). The ones that were created with dbo work fine on my dev machine. The others do not work unless I prefix them with ��myLogin�?�� I get an ��Invalid object name�? if I don��t prefix them. This is problematic because there are hundreds of stored procs and tables that I would need to modify in order to use them on my dev machine.

Can anyone tell me how to create a new user with the necessary permissions so I can execute my procs and access tables without having to prefix them?

Hope this makes sense �� please let me know if it doesn��t.

Thanks,

Mike

View 5 Replies View Related

Asymmetic Key Recovery On A Restored Database

Mar 31, 2008

Hi
I have an sql server 2005+sp2 instance and a db on it.
I have create a database master key (specifying a password so it WILL NOT get encrypted by the server master key) on my database and backed it up

CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'test'
go
BACKUP MASTER KEY TO FILE = 'c:Genesis_DBMasterKey.key' ENCRYPTION BY PASSWORD = 'test'

Then I have created a asymmetic key without specifying a password therefore the key will get encrypted bt the database master key.

CREATE ASYMMETRIC KEY card WITH ALGORITHM = RSA_512

And then for test I run

DECLARE @Encryptvalasym varbinary(MAX)
SET @Encryptvalasym = EncryptByAsymKey(AsymKey_ID('card'), 'EncryptedData')
SELECT @Encryptvalasym
SELECT CONVERT(varchar(max),DecryptByAsymKey(AsymKey_ID('card'),@Encryptvalasym) )

And the result is OK.

Problem: as a recovey plan if I restore the database on the same or other instance (althogh the asymmetic key is part of backup) the decrypt doesn��t work.
I have tried to create a bank database restore tha databse master key and recreate the asymmetric key, but I��m afraid I��m still not having any luck with it, as it does not decrypt.

My main issue is that is any case if I have to recover the database , how do I have to make sure that encryption/Dycription will work?
Thanks

View 10 Replies View Related

How Do I Apply A LDF Log File To A Restored Database?

Mar 26, 2007

I only have the ldf file and the bak file.

My bak file was current to 3/2/2007

My ldf file was current to 3/25/2007

I do not have the mdf file.

How to I apply the transaction from the ldf file to my resotred database?

View 6 Replies View Related

DB Backup Is Not Being Restored To Another DB - Specified Cast Is Not Valid

May 12, 2015

I have been experiencing "Specified cast is not valid" error while restoring backup of DB. Version of SQL server management tool from which I am taking the backup is "Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (Intel X86) Jun 17 2011 00:57:23 Copyright (c) Microsoft Corporation Express Edition with Advanced Services on Windows NT 6.1 (Build 7601: Service Pack 1) (WOW64) (Hypervisor) ". And restoring to the same version tool.

I have tried all the workarounds like TSQL, Upgrade the version of restoring DB to higher version, MDF and LDF files generation. But they are not working.

View 12 Replies View Related

DBOWNER Can Not Access The Restored Database.....!

Mar 19, 2008

Dear All,

I have a user with DBOWNER,DBCREATOR role and access is set to deny on viewing any other databases. Now when I connect using this user and try to restore the database. after restore, I can not open it or access it using the same user.
what is causing this.
Thanks,

View 3 Replies View Related

Encrypt -> Decrypt Into SQL Server

Apr 12, 2001

Hi,
Please help!!!!!!!
Is there are ways to encrypt data in the table (SQL Server 7) and then retrieve (decrypt) this information?

Thanks

View 1 Replies View Related

Decrypt Stored Procedures

Oct 4, 2000

does anyone know how to decrypt an encrypted stored procedure???

regards,
resh

View 1 Replies View Related

How To Decrypt Encrypted UDF In SQL 2000

Aug 28, 2006

How to decrypt encrypted UDF in SQL 2000
can any body help me?

View 3 Replies View Related

Encrypt/decrypt Data

Nov 16, 2004

We like to secure datas.
Only a few people are autorized to read this information, but today, these informations are readable with a simple query with a query analyzer for exemple.

I'd like to encrypt datas with reversible function in one field of a table

Is there a function able to do this kind of work in SQLServer V7 or 2000 ?

View 1 Replies View Related

How To Decrypt Encrypted Procedure

Dec 9, 2004

How to decrypt encrypted procedure?Any help is thankful.

View 7 Replies View Related