Unable To Insert Converted Date Into Date Column (Data Type)
Aug 24, 2015
PHP Code:
INSERT INTO [GPO].dbo.tblMetric (KPI_ID, METRIC_ID, GOAL, REPORTING_MONTH, ACTUALS)
SELECT
1 AS KPI_OWNER_ID
, 23 AS METRIC_ID
, .75 AS GOAL
, CAST(Z.REPORTING_MONTH as DATE) AS REPORTING_MONTH
, SUM(CAST(FTP_COUNT AS DECIMAL))/SUM(CAST(FULL_COUNT AS DECIMAL)) AS ACTUALS
[Code] ....
The insert column I am trying to get into is a date type. The original state of the field is YYYYMM varchar. How to get this into the table.
I'm creating an ISP for extractig data from a text file and put it in a database.
One of the fields in my textfile contains the value '0' or a date. If it's '0' it should be converted to the Null Value. The column in which it has to be saved is of type smalldatetime.
This is the code of my script where I want to check the value of the field in my textfile and convert it to a date or to Null.
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
If Row.cdDateIn = "" Or Row.cdDateIn= "0" Then
Row.cdDateInCorr = CDate(DBNull.Value)
ElseIf Row.cdDateIn_IsNull Then
Row.cdDateInCorr = CDate(DBNull.Value)
Else
Row.cdDateInCorr = CDate(Row.cdDateIn)
End If
End Sub
The error that I get is:
Validation error. Extract FinCD: Conversion of cdDateIn [753]: Eroor 30311: Value of type 'System.DBNull' cannot ben converted to 'Date'.
I have a flat file that has a date column where the date fields look like 20070626, for example. No quotes.
The problem is that several of the date values are missing, and instead of the date value the field looks like this , ,
That is, there are several blank spaces where the date should be. The number of blank spaces between the commas doesn't appear to be a set number (and it could even be 8 blank spaces, I don't know, in which case I don't know if checking for the Len will produce the correct results, but that's another issue...)
So, similar to the numeric field blanks problem, I wrote a script to convert the field to null. This is the logic I used:
If Not Len(Row.TradeDate) = 8 Then
Row.TradeDate_IsNull = True
End If
The next step in my data flow after the script is a derived column where I convert TradeDate from 20070625 to 06/25/2007. So the exact error message I am receiving is this:
[OLE DB Destination [547]] Error: There was an error with input column "TradeDate - derived" (645) on input "OLE DB Destination Input" (560). The column status returned was: "The value could not be converted because of a potential loss of data.".
Do I need to add a conditional split after the script and BEFORE the derived column to redirect bad rows so they don't go to the derived column?
The following error is encountered when importing a delimited flat file with date of fomat "dd.mm.yyyy"
Error: 0xC02020A1 at Data Flow Task, Source - DCDtest_xpt [1]: Data conversion failed. The data conversion for column "value date" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
This was when I manually built the package.
I get the same error when using the Import/Export wizard
I am even using the "suggest types" button and have tried sampling the default number of rows (?200) and also 2000.
The type it suggests is DT_DATE.
But reading the BOL, this would appear to be the wrong type:
http://msdn2.microsoft.com/en-us/library/ms141036.aspx (obviously the right hand doesn't know what the left hand is doing)
seems to indicate that
DT_DBTIMESTAMP
is the correct value
(I cannot believe that they have different datatypes in SSIS than in SQL. I can't believe for a minute this is for all the hundreds of thousands of Oracle users who obviously switched to SSIS when they saw what a high quality product it is.)
I tried other DT_... values but no dice.
Can anyone help?
I always thought that Classic ASP was the worst product I've ever worked with from the Microsoft stable, but I was wrong.
I am fed up of having to post on this board (no wonder it is so 'popular')
Talking to peers, reading books, googling nearly always enables me to figure out a problem with any application I have ever used, but SSIS breaks the mould in sheer crapness and the weirdnes and unfathomability of its cryptic errors,.
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability we tried the datatype float , but it is converting values to scientific expressions(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected we need to store values as is
Error: base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range. --- End of inner exception stack trace --- at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata) --- End of inner exception stack trace --- at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata) at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal() at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount) at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState) at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table) at MS.Internal.MS COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default); DataRow dr; DataTable dt = new DataTable(); DataColumn dc;
try {
dc = dt.Columns.Add("Availability", typeof(decimal)); .
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal .
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Hi, I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
i have to derive a column from an existing column in my data source with a data type of DATE. to illustrate my point lets assume that:
i have dt00 as my current column with its data type of date and now i have to create another column dt01 with data type int. i need to format the date from dt00 to the following format yyyyMMddhhmm, where
yyyy - year MM- moth in two digits (e.g: 03, 12) dd - days in two digits (e.g: 03, 12) hh - hours in two digits (e.g: 03, 12) mm - minutes in two digits (e.g: 03, 12)
and allocate this value to this new column dt01.
could someone give me some clue on how to do this using the SCRIPT TASK?
I have a flat file that is read in by SSIS and then populates our db.
In this flat file there are blank spaces that represent null entries, which are date time values that we need to remain null but instead shows up in the table as the lowest date time value (1753)
Does SSIS automatically convert this since this is not done in our code?
I just need the date, hour, and minute...not the micro seconds. Do I have to DATEPART and concatenate each or is there any way to simply truncate the milliseconds from it? Or is there a date format to put extract and report on it as...
Hello All! Can anybody tell me how to add a date data type into SQL Server? I have a web application that collects data from users, and one of the data collected is the date. I would like to save that date as a date only and not as a datetime like SQL Server wants me to. My first understanding is that, since SQL Server only allows a datetime data type, this is why it appends a time whenever a date is saved in or it appends a date whenever a time is saved in. How do I accomplish this task of saving a date as a date only or a time as a time only? Is there a way to add a date or time data type w/in SQL Server? Or SQL Server just doesn't allow for it? Any help is appreciated!
I am really new to this. Is there a way to set up a data type in SQL Server to automatically write the current date to a column? Instead of sending it from the page, the DB just writes the date to the column ...
I have an accounts table in which i have a date, credit,debit,balance columns.I gave the datatype for date column as datetime.But after entering the values,Date is displayed in a different format.How to display the date in our specified format.
And also,in the balance column i want to store the balance.amd when ever there is a credit or debit,i want to add or subtract from the balance correspondingly.How do i manipulate this .
Hi, I created a function class in "Script Components" to convert an Integer to a Date data type. It works good except that it converts NULL value to the date 1988-12-31; but I want to return NULL when the value is NULL. Any idea on this?
Here is my function:
Public Class ScriptMain Inherits UserComponent
Private Function ConvertToDate(ByVal dateIn As Double) As Date Dim DateStr as String ........... ........... If DateStr Is Nothing Then Return Nothing Else Return CDate(DateStr) End If End Function
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer) Row.ReportDte = ConvertToDate(Row.RPRTDT) End Sub End Class
Is there a performance impact (if so, how great is it) when comparing a date to a datetime data type?
An educated guess suggests yes, as there will be a type casting... but then again I don't believe there's an issue when comparing an int to a tinyint and there's an assumption these would play by the same rules?
This has only come about because I'm considering changing the data type used in my standard calendar script and this popped in to my head.
hi all , does SQL server able to input the date that is originally from 2/6/2004 11:07:46 AM to DD-MM-YY 06-02-04 and store in the DB. For example , this is the SQL insert query
INSERT INTO ADMIN ( ID , NAME , DATE ) VALUES ( 'A001' , 'karen' ,'2/6/2004 11:07:46 AM')
the date will automatically converted to 06-02-04 and store in DB .
Does it need to use SQL Rule or user-defined data type.
I want to create a procedure where nextvisitdate is a cloumn for date so when I passed variable @nextvisitdate then which data type I have touse with it.
CREATE PROCEDURE sp_salesman_nextvisitdate
@salesman varchar (50), @nextvisitdate date (50)
As
Select * from Entry Form
WHERE
@salesman = salesman AND @nextvisitdate = nextvisitdate
I am using one datetime data type ( name: date_added ) and getdate() as default value. I want to display only those records added today. How I can compare current date with date_added.
Hi all, I'm trying to create a temporary table with one of the columns with a datetime datatype. Sql server 7.0 is giving me an error: Error 195 date is not a recognized function name. Example of my create table looks something like this: create table #temp_table(column_one int, column_two(15,2), Column_three datetime)
Msg 242, Level 16, State 3, Procedure sp_CalendarCreate, Line 45 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Can any one tell me the solution of that problem (at ur earliest)
Sub Page_Init(sender As Object, e As EventArgs) Dim txtName As New TextBox() Dim txtPart As New TextBox() Dim txtEach As New TextBox() Dim txtTotal1 As New TextBox() Dim txtSubtotal As New TextBox() Dim txtTax As New TextBox() Dim txtShipping As New TextBox() Dim txtTotal2 As New TextBox()
Dim prod_id As Integer Dim id As Integer id = Request.Querystring("prod_id") txtName.Text = GetName(id).................this is the problem line
Hi! This is my trigger and I'd like to insert the date of today in Column DeletedDate. This trigger is in tblA. tblA and tblB both had the same number of columns and same fields, but I just added another column to tblB called deletedDate and i'd like to insert the date along with the other data. Thanks!!! Insert into tblB SELECT* FROM Deleted
need help help me -CURSOR backward insert from End Date > to Start Date how to insert dates from end to start like this SELECT 111111,1,CONVERT(DATETIME, '17/03/2008', 103), CONVERT(DATETIME, '01/03/2008' i explain i have stord prosege that create mod cycle shift pattern and it working ok now i need to overturned the insert so the first insert is the '17/03/2008' to '16/03/2008' ..15...14..13..12...2...1 so the first insert be '17/03/2008' next '16/03/2008' ...........................01/03/2008
tnx
Code Block DECLARE @shifts_pattern TABLE ([PatternId] [int] IDENTITY(1,1 ) NOT NULL, [patternShiftValue] [int]NOT NULL) declare @I int set @i=0 while @i < 5 BEGIN INSERT INTO @shifts_pattern ([patternShiftValue] ) SELECT 1 UNION ALL SELECT 2 UNION ALL SELECT 3 UNION ALL SELECT 4 UNION ALL SELECT 5 UNION ALL SELECT 6 UNION ALL SELECT 7 UNION ALL SELECT 8 set @i=@i+1 end declare @empList TABLE ( [empID] [numeric](18, 0) NOT NULL,[ShiftType] [int]NULL,[StartDate][datetime]NOT NULL,[EndDate] [datetime] NOT NULL) INSERT INTO @empList ([empID], [ShiftType],[StartDate],[EndDate]) SELECT 111111,1,CONVERT(DATETIME, '01/01/2008', 103), CONVERT(DATETIME, '17/01/2008', 103) -- create shifts table declare @empShifts TABLE ( [empID] [numeric](18, 0) NOT NULL,[ShiftDate] [datetime]NOT NULL,[ShiftType] [int]NULL ,[StartDate] [datetime]NOT NULL,[EndDate] [datetime]NOT NULL) DECLARE @StartDate datetime DECLARE @EndDate datetime Declare @current datetime DEclare @last_shift_id int Declare @input_empID int ----------------- open list table for emp with curser DECLARE List_of_emp CURSOR FOR SELECT emp.empId,emp.ShiftType,emp.StartDate,emp.EndDate FROM @empList emp OPEN List_of_emp FETCH List_of_emp INTO @input_empID , @last_shift_id ,@StartDate,@EndDate SET @current = @StartDate ----------------- -- loop on all emp in the list while @@Fetch_Status = 0 begin -- loop to insert info of emp shifts while @current<=@EndDate begin INSERT INTO @empShifts ([empID],[ShiftDate],[ShiftType],[StartDate] ,[EndDate]) select @input_empID ,@current,shift .patternShiftValue ,@StartDate,@EndDate from @shifts_pattern as shift where PatternId=@last_shift_id+1 -- if it is Friday and we are on one of the first shift we don't move to next shift type . if (DATENAME(dw ,@current) = 'Friday' ) and EXISTS(select ShiftType from @empShifts where ShiftDate=@current and empID= @input_empID and ShiftType in ( 1,2,3)) -- do nothing --set @last_shift_id=@last_shift_id print ('friday first shift') ELSE set @last_shift_id=@last_shift_id+ 1 set @current=DATEADD( d,1, @current) end FETCH List_of_emp INTO @input_empID ,@last_shift_id,@StartDate,@EndDate -- init of start date for the next emp set @current = @StartDate end CLOSE List_of_emp DEALLOCATE List_of_emp select empID,shiftDate,DATENAME (dw,shift.ShiftDate ), shiftType from @empShifts as shift RETURN
I want to compare two columns in the same table called start date and end date for one clientId.if clientId is having continuous refenceid and sartdate and enddate of reference that I don't need any caseopendate but if clientID has new reference id and it's start date is not continuous to its previous reference id then I need to set that start date as caseopendate.
I have a table here. I want find a way of getting the latest date, when the code is the same. If the Declined date is null. Then I still want the latest date. E.g. ID 3.
If the declined date is filled in. Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but i got an error message when trying this out. Against the code
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. What do I need to do to get both my outputs working?
So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?