I am getting this error when i clicked on configuration manager. "Cannot connect to WMI provider. You do not have permissions or the server is unreachable. Note that you can only manage SQL server 2005 and later servers with configuration manager only."
View 10 RepliesHi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
Sim
After having installed my software at customer's I found out that it's impossible to open tables from Enteprise Manager (Query Designer error). I'm not sure it's because of my soft, but my clients are quite annoyed.
I have had this situation on my own server , and the only thing I could do was to reinstall the server.
Any other ideas? And what is the origin for this error?
Thanks in advance,
Asnate
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
Post installation of SQL Server 2014 Express edition, I am able to connect to the Database Instance.
But while opening a new query window in SSMS or opening a table getting the error:
Package 'RadLangSvc.Package, RadLangSvc, Version 12.0.0.0, Culture=Neutral, Public Token=89845dcd8080cc91' failed to load
Object reference not set to an instance of an object. (mscorlib)..Have already tried installing the componentsDACProjectSystemSetup_enu.msi, TSql LanguageService_enu.msi, DACFramework_enu.msi from path VS 2010 WCU DAC.
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Let's have some comments
I just installed SQL Server 2005 Express Edition and reporting services (followed the video tutorial). Whenever I try to open the Reporting Configuration Tool, it gives me the following error:
SQL Server 2005 Reporting Configuration Tool has encountered a problem and needs to close. We are sorry for the inconvience.
My only options are to Debug or Close.
I'm not sure why I am getting this error. Can anyone help?
Thanks,
Amanda
Each time you start a SSIS project you have Solutions Configuration showing "Development". In the drop down box you can select "Configuration Manager..."
Can someone tell me the use of this, and is it related to the package configurations somehow. I've tried to create new Solution Configurations like "Test" and "Production" with the purpose of binding different configuration files and deplymentfolders to each Solution Configuration but still it seems like this isn't the way i should be used...
I have an application ready to transfer to the web hosting server with MS SQL 2005.
Database and tables were created with the VWD on the local machine (SQLEXPRESS).
I am using MS SQL Server Managenemt Studio Express to create the SQL to add the local tabales and data to the hosting database.
My connect to the hosting server is great.
Problem: My connection to SQLEPRESS is good but it only allows me to map Database from this directory C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData. I need to map to another directory as follows C:Documents and SettingsdflournoyMy DocumentsVisual Studio 2005WebSitescolumbushapps/app_data. So I can get to the tables I created locally.
Also has someone put together a process to migrate from SQLEXPRESS (Local) to Remote or Production SQL 2005 or 2000.
For some reason, when opening up the SQL Server Configuration Manager for one of my SQL Servers, the 'Requesting data from WMI provider..' message stays there. It never gets the data. This is in regards to services management. Its not a big deal, because I can log on to the server to accomplish this, but it would be nice to do it from SSMS. It works for other SQL Servers. Has anyone experienced this before?
View 4 Replies View RelatedGuys,
can you guys pls let me know how do you access sql server configuration manager from command line?
Thanks
We deployed Reporting Services recently to a customer with a latest release and build. When they type in http://<server>/ReportServer, this just comes up with a screen like a navigation sreen showing folders and links to reports. What needs to be done to get the Report Manager screen showing?
It has been a while since I actually installed Reporting Services. When they go into configuration, all of the green checks are there (except for Web Service Identity, which is Red).
Thanks for any information.
Hi,
I've had weeks trying to establish connections between my PC and Small Business Server 2003 running SqlExpress. Finally sorted out the problem, and wanted to go into Sql Exp Configuration Manager.
This I've been using for weeks, yet today I get a message that " MMC could not create the snap-in".
I thought that MMC update 3.0 may be the problem., however, cannot find any indication that my server has been updated to MMC 3.0.
If that does happen to be the cause, how do I get around it.?
Thanks for any advice
I just installed 3 instances of SQL Server 2005, installing the two named instances first and then the defaul instance third.
My configuration Manager only shows the two named instance services and the default does not show up.
Under Services in Computer Manager, it does show.
Any one run across this, and I would think it might cause some problems now that all the service configuration changes need to be performed in SQL Server Configuration Manager.
Thanks
Trying to setup local server agent.
SQL Server Configuration Manager---->SQL Server 2005 Services-->Nothing showed up??? No single items there.
So strange, Anyone could tell me what is wrong with this.
2005 Developer Ed
Windows Xp professional 32 I guess.
Hi all. I'm currently working with SQL Server 2K, and I've installed Analysis Services as well as SP4.
I previously wrote a DTS that had several FTP steps in it. I was able to view/edit/run this package until recently. We were testing out SQL Server '05, and when we uninstalled it, it really screwed up my install of SQL 2k.
Long story short, I've scrubbed the system and reinstalled SQL Server 2K, but am unable to open the DTS package. The error I get is:
Error Source: Microsoft Data Transformation Service (DTS) Package
Error Description: Unspecified Error
Then a prompt that says:
The selected package cannot be opened. The DTS Designer has been closed
I've googled like crazy, and have been unable to find any resolution on this. Any help would be greatly appreciated!
i have installed Microsoft SQL server 2000(evaluated version). I opened enterprise manager.and opened one of the default database.(Northwind).I clikced on the tables in the Northwind. On the right side of the console I right-clicked on one of the table and tried to open table--> Return all rows.. I am getting a message saying that "Provider cannot be found. It may not be properly installed".
I tried to reinstall the sql server evaluated version. I installed it 3 to 4 times restarting my computer. But still its giving me the same problem.
I am using Windows Xp OS. Do I need to take care of anything before installation. I even removed Office XP from my system thinking if that has anything to do with the installation. Please let me know as soon as possible.
One last question, is this a very rare problem or is the problem only with me. Because I couldnt find a solution as nobody is giving me a reply.
Often when I open an SCD component that was previously configured I find that the configurations are lost. The "Input Columns" and the "Key Type" columns on the first screen ("Select a Dimension Table and Keys") are blank. The "Dimension Columns" column is still populated.
If I run the package, the SCD component appears to function the way it was configurated to function. However, the settings cannot be viewed.
Has anyone experienced anything similar? Any ideas why this happens?
Thank you.
Has anyone tried Open File Manager to backup SQL 7? I'm in the middle of an evaluation (and all is going well), so I wanted to get other's opinions before I purchase.
I tried their 5.x product a year ago, and it didn't work. But V6 has been just what they toted (it worked, no questions asked).
Thanks,
Charles
Backup Integration Manager
CDW Reseller
We changed the IP addresses for several SQL Servers and we're a little confused by what we see in Configuration Manager. The TCP/IP properties "IP Addresses" tab still shows the old IP address, even after a restart. On "Protocol" tab, Listen All is set to "Yes".
We've found one source that says this setting causes the listening on an individual IP to be ignored.
Hi, I dont know if I should post this question here, or on oracle forums, but here goes ...
I made a simple package that performs 2 Excecute SQL Tasks, one task does a select query on a SQL Server DB Table, the other task does a select query on an Oracle DB Table.
The package runs fine in BIDS when debugging, but when I deployed the package to a file system and added it to an sql server agent Job, it all went wrong ...
I tried the ms oledb dataprovider (ole db) for oracle but also the oracleclient data provider (ado.net) but the package always fails.
The error messages in the logfile are these:
event
OnError
computer
ComputerName
operator
NT AUTHORITYSYSTEM
source
Execute SQL Task PLSQL
sourceid
{B29C4FC9-3345-4657-8680-F770B8C2E136}
executionid
{7312A7EC-2555-4268-BB29-38659507BADD}
starttime
14/04/2006 16:40
endtime
14/04/2006 16:40
datacode
-1073573396
databytes
0x
message
Failed to acquire connection "aaa.bbb.oracleClient". Connection may not be configured correctly or you may not have the right permissions on this connection.
the OnError logrow for the package itself says almost the same.
Now my question is: What do I need to configure to get it all working? I think I need to configure the oracle db no? What should I configure? ...
Hi
I want know how to config SSIS Package With different connection Manager.
Sample .
When Design time i gave The Connection Manager(Devlopement Server) Name : STG1.XXXSchema
Server Name STG.ssss
Password : xxxxx
I make the The XML configuration file .
after deploy the Package i want from Development Server to Production Server . so i will change the Package Config File Open wiht Notepad .
Server Name STG.qqq
Password :xxxxxx
after Edit Connection String I run the Package . It Always Taking Whatever igave the Connection String When Design time only .is not taking what connection string edit hte in the Package Config File. Please Any one give the Solution .
How we can Change the connection string in XML Config File .Whne I tested . It always taking what ever we given in the Desing Time .
Thanks & Regards,
Jeyakumar .M
Hi Guys,
I have installed a certifcate following
http://msdn2.microsoft.com/en-us/library/ms191192.aspx
But when i try to enable the certificate using Configuration manager i cant see the certificate. I can see the
certificate using MMC console. I followed the instructions and all the "Certifcate Requirements" from BOL is looking fine, but still cannot able to see the certificate in the configuration manager.
Any help/direction much appreciated.
kind Regards
A
Greetings All;
I am having trouble getting an indirect configuration to work. Can someone offer a hand?
Here's the deal....
I have a package the currently has an OLE DB Connection manager. I have an XML configuration file set up to acquire the connection string. That works fine. I have a package variable that contains the absolute path to the .dtsconfig file.
How can I get the connection manager to read the package variable (which has the path to the *.dtsconfig file) instead of the hard coded value?
Thanks in advance.
I need another opinion about the SQL Server Configuration Manager's TCP/IP settings...
Recreation steps:
Start, (All) Programs, SQL Server 2005, Configuration Tools, SQL Server Configuration Manager.
Expand the "SQL Server 2005 Network Configuration"
Select the "Protocols for x" where "x" is the named-instance or "MSSQLServer" for default.
On the right-hand pane, right-click "TCP/IP" and select "Properties."
Select the "IP Addresses" tab.
Visually on the screen I have this:
_______________________________________
- IP1
Active Yes
Enabled No
IP Address 106.xx.xxx.xx
TCP Dynamic Ports
TCP Port 1433
- IP2
Active Yes
Enabled No
IP Address 127.0.0.1 <-loopback
TCP Dynamic Ports
TCP Port 1433
-IPAll
TCP Dynamic Ports
TCP Port 1433
_______________________________________
Questions:
1. If I want to change the listening port, I change all three at the same time?
1a. Does a value in the IPAll section override the individual IPx sections?
2. What does "enabled" mean? How can IP1 and IP2 not be enabled?
3. What does "active" mean? How can something be both active yet not enabled?
(4. Any plans to change the "NULL=False, 0=True" values for the Dynamic Ports?)
when i open services in the computer management console i get the error message
sql server configuration manager .... error... snap in...restart mmc
I have a 2 node cluster in an active/active configuration. Install is SQL 2005 Enterprise Edition x64, patched to KB934458
If I try and run SQL Server Configuration Manager on node 1 the application does not start and I get the following message: "Connection to target machine could not be made in a timely fashion." This happens for both SQL Server instances (SQL01 and SQL02).
I can connect fine on the 2nd node with both instances.
Further to this, if I try and run the Surface Area Configuration tool on node 1 - I can't connect to either SQL Instance (SQL01 and SQL02)
If I run the SAC tool on the second node, I can connect to the instance SQL02 that is active on node 2. If I fail that SQL Instance over to node 1, I can no longer connect
I think there is clearly something not quite right about node 1.
Any help/pointers would be appreciated.
Hi, i'm trying to interface a c# application with an sql database created with Visual Web Developer Express.
I have published the site (and the db) on iis 5 (xp pro).
Everithing goes fine on accessing the database from internet,but when i try to connect the db while it's opened with my c# program i keep an error in the sqlconnection open command:
Unable to open the physical file "C:myApp_Datamydb.mdf". Operating system error 32: "32(The file is in use by another process.)".
My connection string from webconfig:
<add name="MYDBCS" connectionString="Data Source=.SQLEXPRESS;Database="C:myApp_Datamydb.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True"
providerName="System.Data.SqlClient" />
.....and the connection string for the c# program:
"Data Source=.\SQLEXPRESS;Database=c:myapp_datamydb.mdf;Integrated Security=False;Connect Timeout=30;User ID=abc;Password=abc;Trusted_Connection=False;";
I have used a user to connect the database because there was a conflict trying to open the db with Integrated Security=True.
Does anyone have an idea where is the error?
Many thanks
Max
Hi All,
When i try to open tables under any database i get an error message that says
" An unexpected error happened during this operation. [Query] Query designer encountered a Query error: Unspecified error".
I uninstalled the Client from my desktop and reinstalled the client.When i try the same operation on the server where the SQL server is installed, i get the same error message.
I have sp2 installed.Would it help if i install sp3?
TIA
Muthu
Hi everbody,
In my machine i am unable to open .sql files. I am trying to open . Sql files it gives error message
Windows can't find program.exe. This program is needed for openings files of type"SQL script file"
Any body tell me which file i have to install.
Thanks
hi
i am unable to open table columns. kindly suggest. errcoe 233
reg
ramu
Hopefully I am in the right forum :o
I am trying to run the following mdx query:
SELECT
{
([Location].[Code],
[Measures].Quantity)
}
ON COLUMNS,
{FILTER (
CROSSJOIN (
[Manufacturer].MEMBERS, [Item].MEMBERS),
(([Measures].[Quantity]) <> 0))} ON ROWS
FROM
[Stockbalance]
But, I have encountered the error:
Unable to open cellset
Formula error - cannot bind: unknown dimension or member: "[Location].[Code]"
This is my first query using mdx. -_-' Appreciate if someone could help me out.:beer:
Also, what I am hoping to do:
Location1 Location2
Manufacturer Item Desc Qty Qty
I got this error message from the sql agent log file:
05/18/2007 02:14:10,,Error,,,,,,[LOG] Unable to read local eventlog (reason: The parameter is incorrect),,,,,,,
How to solve this problem?
Thanks
April