I am receiving the following error when attempting to create a new package in SSIS 2005. I have completeley re-installed, and even had our support folks re-image my pc, but no luck. Works fine on my laptop, and others are not having any issues.
Microsoft Visual Studio is unable to load this document:
Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
Any help would be greatly appreciated. Thanks, Bryan
When I open up my existing SSIS project, I always get this error. Does anyone know what was wrong ?
TITLE: Microsoft Visual Studio ------------------------------
Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.IObjectWithSite'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{FC4801A3-2BA9-11CF-A229-00AA003D7352}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
Response.Write("The following exception occurred: " & ex.Message)
End Try
End If
End Sub
I've tried both "sql" and "dts" with all the various permutations that are listed (and commented out) above. I either get an error that says: The top level folder "VisBridges" is not found. ("dts" "VisBridges") -- or -- Invalid package name or location: MSDBVisBridgesExportTime ("dts" "MSDBVisBridges") -- or -- Cannot find folder "MSDBVisBridgesExportTime" ("sql" "MSDBVisBridges") -- or -- The specified package could not be loaded from the SQL Server database ("sql" "VisBridges")
I've created a new SSIS package and am trying to run it as a sqlagent job. If I 'Run as' the 'SQLSERVER AGENT' account I get 'Executed as user: domainadministrator. The package execution failed. The step failed'. If I change this to 'Run as' 'sql agent service account' I get the following message 'Executed as user: [[servername]SYSTEM. The package execution failed'. The step failed.
I can successfully run the package in visual studio, management studio and via the command prompt.
Presumably it is a permissions problem?? I've tried setting up the logging but nothing was written to the log when I run the job, there is otherwise(via Visual studio). I've also tried the following http://support.microsoft.com/kb/918760, but it made no difference.
I have designed a packege using my local machine ( 32bit) and am trying to deploy this package to 64bit machine and open it up.. are there any issues that I need to aware of? 32 bit ssis and 64bit ssis are comparable each other?
I have created an SSIS package with protection level - EncryptSensitiveWithUserKey. It is running alright from Visual Studio Environment but i need to call the package from an application, so i created a stored proc to call it, but getting the following error while running the stored proc:
Error: 2007-04-16 17:55:05.78
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that
I have developed a SSIS dts package, its running fine from my computer, but the problem is when I am deploying it on actual server then giving me error for connection
scenario,
development env: dev006
three servers: srv01 (64bit), srv02 (32bit), srv03 (32bit)
in development environment, same package is getting data from srv01 and pushing it to srv02 and srv03, but when i am deploying it on srv01 then it fails to establish connection with srv01. If I have a Business Intelligence Studio on 64bit then I will check it but that Studio is available for 64bit environments.
I created a SSIS package which will generate an output file and place it on a remote fileshare location which will look something like this
\RemoteServerNameRemoteFilePath
The package is executing fine when I am executing it through BIDS or through execute package utility and writing the output file to remote file share location.
I created a SQL job for the package and ran the Job. Then, its throwing an error saying
Executed as user: DomainUser. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:33:06 AM Error: 2008-03-10 10:33:22.22 Code: 0xC020200E Source: DFT_Generate Output File Description: Cannot open the datafile " \RemoteServerNameRemoteFilePathOutputFileName.txt". End Error Error: 2008-03-10 10:33:22.34 Code: 0xC004701A Source: DFT_Generate Output File DTS.Pipeline Description: component "FF_DST_Output" (160) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:33:06 AM Finished: 10:33:22 AM Elapsed: 15.891 seconds. The package execution failed. The step failed.
DomainUser have all the permissions on the remote file share location. SQL server agent is running with the log-on account DomainUser(same as the above).
Post installation of SQL Server 2014 Express edition, I am able to connect to the Database Instance.
But while opening a new query window in SSMS or opening a table getting the error:
Package 'RadLangSvc.Package, RadLangSvc, Version 12.0.0.0, Culture=Neutral, Public Token=89845dcd8080cc91' failed to load
Object reference not set to an instance of an object. (mscorlib)..Have already tried installing the componentsDACProjectSystemSetup_enu.msi, TSql LanguageService_enu.msi, DACFramework_enu.msi from path VS 2010 WCU DAC.
I am running SQL 2005 Enterprise with SP2. In the past I have been able to successfully create SSIS packages using the BIDS and also Maintenance Plans from within Management Studio.
Today I tried to edit a maintenance plan and got the following error message:-
TITLE: Microsoft SQL Server Management Studio ------------------------------ Retrieving the COM class factory for component with CLSID {0BE35203-8F91-11CE-9DE3-00AA004BB851} failed due to the following error: 80040154. (Microsoft.DataWarehouse) ------------------------------ BUTTONS: OK ------------------------------
This error also occurs if I try to create a new Maintenance Plan.
I then tried opening an existing SSIS package in BIDS and got the following error:-
------------------------------------------------------------------------------------------ Microsoft Visual Studio is unable to load this document Index (zero based) must be greater than or equal to zero and less than the size of the argument list. ------------------------------------------------------------------------------------------
These errors only occur on my PC so I know that the problem is with my PC. I have totally uninstalled SQL 2005 components from my PC and reinstalled them with no luck.
To my knowledge, I haven't installed any other programs since creating these packages, although there's a possiblilty my PC may have had some patches applied through SMS.
I have created a solution which contains only 2 packages say Package1.dtsx and Pakage2.dtsx. I want to create a deployment utility to deploy onto other developers machince. I changed the project properties "CreateDeploymentUtility" to TRUE. When I do the build it is not creating the files in "Deployment" folder. It is saying Rebuild All Failed but the error is not showing.
For more information the 2 packages have 4 indirect configurations from environment variables which are storing the actual config file path.
We are trying to import data from a .csv file which sits on shared location. This package runs fine when we run it from designer. but we are having problem when we do it at run time (accessing it through a service). Same package runs fine if that file is on same server.
Is any one gone through this issue before? i appreciate any help in resolving this issue.
We are executing a SSIS package using a xp_cmdshell command in a SP as shown below. This package does consumes time to execute almost 90 minutes and does get executed successfully too. But the strange thing is we don't get the result in @result variable just because somehow the next sql statement after the below highlighted statement doesn't get executed at all. After checking execution stats for the SP using the query attached below we observed that somehow the SP vanishes out of the execution stats for the server.
I am learning SSIS and I am working through the Wrox book on 2005 SSIS. When I try to Import the files from the AdventureWorks2000 database I cannot see the Human Resources files. I was able to go through the wizard once and see the files and select them and proceed, but now I cannot see them. Please keep in mind I am a newby to this. What should I check for or what am I doing wrong?
Is there anyone out there that can help me - please! I'm about to put my head through a wall.
I used to be able to create SSIS packages in VS 05. It's been a while since I've done it, but when I went in the other day, it would let me - all I can do is get errors. It tells me an "error prevented the view from loading" when it opens in control flow (blank packages and ones I created before all this started) and I get this error :
"Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) (System.Windows.Forms)"
If I go over to the Data Flow tab and there are no errors until I click "Click here to add a new Data Flow task", then I get this :
"Object reference not set to an instance of an object. (Microsoft.DataTransformationServices.Design)"
So... here's what I've tried.
Uninstalled and reinstalled VS 05 and SP1 (this was before I realized the problem was with SQL).
Uninstalled and reinstalled Office 2003 Web Tools.
Made sure all the MSXMLs were registered.
Uninstalled and reinstalled all SQL Servers and Tools/Components.
Made sure all SQL Services were running under Local Account
Made sure Integrated Services service was running.
Applied all SQL patches.
I cannot get this to work and I need to be able to create packages. The only other step I can think of is wiping my computer and I don't want to have to do that.
Please please can anyone help me?? I've been scouring the internet and working on this for 1 day and 1/2.
Can someone point me to any whitepaper on how to use a Transact SQL script to create an SSIS package. I will need to be able to run the script at various customer sites.
I am working on modifying a VB6 app that dynamically creates DTS packages to copy data from one database to another depending on the selections made in UI. The project currently uses DTSPackage object library and DTSDataDump Scripting object library. We are in the process of upgrading the server to SQL 2005. I am exploring the possibility of replacing code that generates DTS packages on the fly with SSIS packages.
Is it feasible to do this in VB6 ? I have referred to similar posts which focus mainly on VB.NET or C#. Any help with white paper or sample code would be appreciated.
I want to create a package that imports data from a Visual Foxpro database to SQL Server 2005 Express database. I used the wizard in BI Development Studio (similar to the DTS in SQL Server 2000) to create a package and noticed that the SQL statements created in the Preparation SQL Task only has code for creating tables. I want to make the package such that it first creates the destination database before creating all the related tables in it! When I tried to edit the SQL code to include DROP DATABASE and/or CREATE DATABASE statements, these were rejected.
Is it possible to do this or do I have to first create the database outside the package and then call the package? I want to make this a seamless process for clients who do not have the know-how of SQL Server database administration.
i have to manipulate/calculate an attribute at runtime in a number of dataset within a package. since the manipulation will be the same for all these datasets and that it has to be done with a script, i am looking to find a way of creating a single instance of this script and call it as and when necessary.
could i use a variable of data type object and pass and retrieve parameters into and out of it?
lets assume the following scenary to illustrate my point. i have to create a new attribute in two datasets ( ds1, ds2) which is based on the following attributes: firstname surname
and that i want to create this new attribute as:
surname, firstname
so i am creating a single string composed of surname plus a comma and firstname.
thus i will be creating a new attributes called custNames for two or more dataset and it tomorrow it is decided that i should be done in a different way then i only need to amend in on place.
i know it is not clear but i will be glad to anwser any queries to clarify this question.
I am new to SQL Server 2005, I need Help to create a SSIS package for the below taks, My task is Refer a Column [Status] in the Logtable which is used to maintain the logs for the running processes, When ever any Rows with the "FAIL" status in Status column occurs in the LogTable then get the Respective ErrorRowNumber and get the Details of the Error from other 2, 3 tables which will be a simple SQL statements, when you get the Error Details then mail these details to the given Email id.
For this I need a help In creating a SSIS package which will continuously check the Status and if any FAIL status occurs then the Error details need to mail to mail id which are stored in the config files of SSIS package.
If any one has better idea to send the mails then please let me know.
if any online tutorial is available that will also help. Thanks in advance
Create a SSIS package for following scenario.I have one excel file which will contain 10 records for Monday, 12 records for Tuesday, 7 on Wed, no records on Thursday so if records are there I get mail if no records are there I didn't get mail daily.
Hi, I want to create a package to import some tables from database X from Server XYZ to database X of server ABC. (As my X database on server XYZ is gets updating everyday so i need to update it on X of server ABC using the package.) So i have created a package using the import export data transformationn services. It runs fine while creating. i.e importing data for the first time. But when i have saved that SSIS package on SQL or File system and scheduled it to run daily, but if fails everytime. I am not getting the error its giving. Because everytime when i go to view history of that package it just gives me messages like step1 started by user xyz and failed. Can you please help me to sort out this problem. If possible give me steps which will help me to create package to run above scenario. you can mail me the solution on abhijeets@nedbank.co.za
I am new to SSIS. I have a requirement that from a flat file need to import the data into SQL Server DB(SQl Server2008r2).
1.When the file doesn't found in dir need to send a mail. 2.error reading And writing ,on which record the error occurred and capture the error details and need to send mail. 3. In success also need to send a mail.
I am looking high and low for some assistance with developing a VB .NET solution that I programmatically create a package and add tasks. I am adding a BULK INSERT task to load large FLAT TEXT files into SQL Server 2005 tables. When I execute the application I execute a package validation and it always returns FAILURE. I have been reading and searching like crazy and I have bought 2 microsoft books, TO NO AVAIL! Can anyone PLEASE help me with this. Thank you!
I am trying to dynamically create the connection to a database within an SSIS package.
the requirement is to allow the user to pass through the database as a variable and that variable will dynamically create the connection string in the connection manager.
Requirement: When we create SSIS Pacakge using Businessinteligence studio.Each Source and Destination or whatever we using the Control required DB Connection.
we connect theDB server and Database Table through manaully .Instead of Manual i need dynamic Global varible for Connection String .How to achieve this connection string.
because suppose we create SSIS Package in Developement Server Latter We change the Server from Developement to Another Testing Server . at that time we dont requierd for changing manulay.any one pls reply me.
Same as in Dotnet we give configiration XML file .we gave the Connection strng. how to in SSIS we do?
2) NG20150623.txt 2015-06-23 00:00:00.000 NG 20150701 43
3) HO20150624.txt 2015-06-24 00:00:00.000 HO 20150701 43 And so on..
But the requirement is to have a dynamic query where we can have more number of Codes or less number of codes and similarly the package should generate dynamic text files, one .txt file per code. What is the best way to create a package which can meet the above requirement?
We are in the process of trying to automate our production releases (what a concept ;-)
The database is SQL server 2005 All objects are being stored in VSS Using Nant and Cruise Control for the actual migrations. I have two directories - Create (for a brandnew database) and Change (db object changes)
In my 'Change' script, I do the following -
1 - Take backup of database 2 - Migrate objects from 'change' directory to production 3 - Script out all objects of database and save in the 'Create' directory
For the #3, I was hoping I could create an SSIS package that would script out all database objects and save them on the VSS server.
I'm new to SSIS and want to verify it's something that can be done before I start down that path. If anyone has any examples or references, it would be much appreciated.