I would like to reinstall the enterprise manager of sql server 2000,
and i have currently sql server 2000 SP4 installed on it.
I googled on it, and read that installation of enterprise manager is
possible from the setup disk, however, this is not possible: it rejects
because of the service pack.
How can I reinstall enterprise manager, without haveing to uninstall
sql completely?
Thanks
Prem
Hello,
I have recently tried to run this command line utility for SQL Server 2005 -
"start /wait sqlfodersetup.exe /qb INSTANCENAME=myinstance REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=[password] SQLCOLLATION=SQL_Latin1_General_CP1_CI_AI"
Unfortunately I recived an error stating the "Installation package for the product SQL Server 2005 (64bit) cannto be found. Please locate a valid SQLRUN_SQL.MSI". Which I couldn't find anywhere., so....
I created a fresh instance on my 2005 server, held back on installing SP1, and ran the command line again. This time it worked.
My best guess is that the installation scripts check the version header on the MSI file during install and display a compatibilty error thus halting the install.
My question is, has anyone seen, overcome this problem. I can't believe that this is a bug like error as there would be posts about it all over the interweb.... which there isn't.
Any thoughts.
Mike.
(p.s) I know that I shouldn't really try to amend the collation on a sql server, but I have little choice at the moment :-(
I can€™t use the DTS editor because shows an error.
So, I want to reinstall the enterprise manager without uninstall the sql server 2000, Is that possible?
If the answer is yes, How can I do that?
I think that reinstalling only the Enterprise Manager the DTS editor can be fixed.
Sql Version: Sql Server 2000
SO: Windows 2003 Server
Tanks in advance
Ariel.
Something happened when the server fall down because of no disk space.
Now everything is fine but I have a problem in de DTS (from the Enterprise Manager) editor, I can€™t run, modify and even make a new DTS.
What can I do? Is it possible reinstall de DTS components without reinstall sqlserver 2000?
Sql Version: sqlserver2000 Enterprise
SO Version: Windows 2003 Server
Thanks in advance
Ariel.
I recently installed an evaluation copy of SQL Server 2000 on a machine with Windows Server 2000. Nearly all actions in the enterprise manager cause 15-second to 60-second loud, monotonous reads of the hard drive. Anything from expanding a tree item to creating a table.
This makes the product more or less unusable. What could be causing it?
All other software on the machine works normally, and nothing else seems wrong.
Hello,
I am running an SAP installation on clustered DELL poweredge 1850's with a shared scsi disk system. I am running Windows 2000 sp4 with sql 2000 sp4. I am trying to restore a database from a .bak file on a clustered disk. When I attempt to access the disk through enterprise manager it is not there. I only get access to the E: drive (which is clustered as well)
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedIF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedWhen I select All Actions>Backup Database and then click the ... button to choose a location on the hard drive, SQL Enterprise Manager Hangs and I have to kill it from Task Manager.
All other areas of EM browse the disk drive without a problem. (DTS, File Groups, etc.)
Anyone ever run into a similair problem?
Thanks
IN the enterprise manager I could see my database server but could not see the databases.Bur I can see the databases and database objects in quesry analyzer. What should be the problem and how can see the databases from my enterprise manager.
Thanks.
I am attempting to connect to a remote default instance of SQL Server2k on Win2k using Enterprise Manager from my local host but receive a"SQL Server registration failed, timeout expired" error message eachtime.I am able to connect using Query Analyzer when specifying the IPaddress of the server (I am also specifying the IP address in myEnterprise Manager connection), am able to ping the server from thecommand line, and am able to telnet to port 1433. I have triedconnecting both before and after creating an appropriate alias inClient Network Utilities all to no avail.I ran SQL Profiler while attempting to connect and do not see theconnection attempt reach the server. What could be preventingEnterprise Manager from reaching/connecting to the server while allother utilities (including profiler) are fine?Thanks in advance.
View 1 Replies View RelatedServer does not exist or access is denied ...
Im trying to replicate a database (on web hosting server) my own local machine
I have successfully registered the server in enterprise manager, i know i have username/password correct [server status shows a blank white dot??]
Any ideas??? Maybe my network wont allow me, i cannot telnet to the server even specifying the particular port?
I have managed to backup the database via services provided by web hosting company, is there a way i can expand the database from this backup file using enterprise manager surely???
TIA
After having installed my software at customer's I found out that it's impossible to open tables from Enteprise Manager (Query Designer error). I'm not sure it's because of my soft, but my clients are quite annoyed.
I have had this situation on my own server , and the only thing I could do was to reinstall the server.
Any other ideas? And what is the origin for this error?
Thanks in advance,
Asnate
Folks,We're implementing a software based mirroring solution. This solutionrequires that the SQL Server service on the target server be stoppedwhile data is being replicated from the source server.One problem we encountered while testing was that the SQL ServerService on the target server was inadvertantly started when usersselected that server in Enterprise Manager. Is there any way to keepthe service from starting through Enterprise Manager?Thanks
View 2 Replies View RelatedSQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies View RelatedHi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
Sim
I have VS 2005 and SQL 2005 Developer ed (OS Vista) installed on my pc. When I uninstall SQL 2005, I encounter an error for SQL Reporting (someting to do with unable to read some file). Since then I am unable to reinstall SQL Reporting or uninstall SQL Reporting. I removed all the files from the directory but still I have not been able to do....Please advice...
Thanks
Malik
Previously, I have installed SQL 2005 developer edition simplyfied chinese
successfully. But yesterday, I tried to install mobile client software
factory. The installation process create a database as following:
Create DATABASE [AdventureWorksMobileStaging] ON PRIMARY
( NAME = N'AdventureWorksMobileStaging', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging.mdf' , SIZE = 195584KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
( NAME = N'AdventureWorksMobileStaging_log', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging_log.ldf' , SIZE = 265344KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
But today, when I start my notebook, SQL server could not be started.
Then I uninstalled the SQL instance by start->control panel->uninstall...The uninstall
process seems OK. Note that I only uninstalled the instance.Then I tried to reinstall
SQL 2005. However it was reported a Performance Monitor Counter registry key mismatch
error occures. I tried to fix it but failed. The problem is as following:
1, The installation process report a warning of low memory.
My notebook has 512M memory. I have reinstalled SQL 2005 once successfully. At that
time, the warning also shows, but it seems that this warning does not affect installation.
2, User type problem.
The OS of my notebook is XP professional, which is upgraded from XP home edition.
I login it using a domain user such as: "my company's domainmyaccount". I found it
curiously that although I assign myaccount as an Administrator, it will automaticly
changed to "SQL$...." account. I don't know why and when the account property is
changed. But everytime, when I found, I will assign myaccount as an Administrator
back.
3, Performance Monitor Counter registry key problem.
To fix the problem, I firstly tried to run lodctr.exe in cmd window but failed.
When I cd to c:windowssystem32 dir, I can ran lodctr.exe correctly.
I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib,
the result is:
"Last Counter"=dword:0000149c (11128)
"Last Help"=dword:0000149d (11129)
Then I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib 09
and 004, the result is confusing. I can find counter and help key,but both keys contains
really a lot of stuff as:
(1) first page of Counter key:
1
1847
2
System
4
Memory
6
% Processor Time
10
File Read Operations/sec
12
(2) first page of Help key:
3
The System performance object consists of counters that apply to more than one instance of a component processors on the computer.
5
The Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random access memory on the computer. Virtual memory consists of the space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes.
7
% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the duration of the idle thread is active in the sample interval, and subtracting that time from interval duration. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It is calculated by monitoring the time that the service is inactive, and subtracting that value from 100%.
9
% Total DPC Time is the average percentage of time that all processors spend receiving and servicing deferred procedure calls (DPCs). (DPCs are interrupts that run at a lower priority than the standard interrupts). It is the sum of Processor: % DPC Time for all processors on the computer, divided by the number of processors. System: % Total DPC Time is a component of System: % Total Privileged Time because DPCs are executed in privileged mode. DPCs are counted separately and are not a component of the interrupt count. This counter displays the average busy time as a percentage of the sample time.
11
File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
I could not find the maximum value of the Counter key and help key, so I could not repair
Last Counter and Last Help key as discribed at SQL 2005 help. Which item correspond to
maximum value of the Counter key and help key?
I tried to correct Last Counter and Help key as:
"Last Counter"=dword:0000149c (5276)
"Last Help"=dword:0000149d (5277)
But it also doesn't work.
Previously, I have installed SQL 2005 developer edition simplyfied chinese
successfully. But yesterday, I tried to install mobile client software
factory. The installation process create a database as following:
Create DATABASE [AdventureWorksMobileStaging] ON PRIMARY
( NAME = N'AdventureWorksMobileStaging', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging.mdf' , SIZE = 195584KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
( NAME = N'AdventureWorksMobileStaging_log', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging_log.ldf' , SIZE = 265344KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
But today, when I start my notebook, SQL server could not be started.
Then I uninstalled the SQL instance by start->control panel->uninstall...The uninstall
process seems OK. Note that I only uninstalled the instance.Then I tried to reinstall
SQL 2005. However it was reported a Performance Monitor Counter registry key mismatch
error occures. I tried to fix it but failed. The problem is as following:
1, The installation process report a warning of low memory.
My notebook has 512M memory. I have reinstalled SQL 2005 once successfully. At that
time, the warning also shows, but it seems that this warning does not affect installation.
2, User type problem.
The OS of my notebook is XP professional, which is upgraded from XP home edition.
I login it using a domain user such as: "my company's domainmyaccount". I found it
curiously that although I assign myaccount as an Administrator, it will automaticly
changed to "SQL$...." account. I don't know why and when the account property is
changed. But everytime, when I found, I will assign myaccount as an Administrator
back.
3, Performance Monitor Counter registry key problem.
To fix the problem, I firstly tried to run lodctr.exe in cmd window but failed.
When I cd to c:windowssystem32 dir, I can ran lodctr.exe correctly.
I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib,
the result is:
"Last Counter"=dword:0000149c (11128)
"Last Help"=dword:0000149d (11129)
Then I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib 09
and 004, the result is confusing. I can find counter and help key,but both keys contains
really a lot of stuff as:
(1) first page of Counter key:
1
1847
2
System
4
Memory
6
% Processor Time
10
File Read Operations/sec
12
(2) first page of Help key:
3
The System performance object consists of counters that apply to more than one instance of a component processors on the computer.
5
The Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random access memory on the computer. Virtual memory consists of the space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes.
7
% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the duration of the idle thread is active in the sample interval, and subtracting that time from interval duration. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It is calculated by monitoring the time that the service is inactive, and subtracting that value from 100%.
9
% Total DPC Time is the average percentage of time that all processors spend receiving and servicing deferred procedure calls (DPCs). (DPCs are interrupts that run at a lower priority than the standard interrupts). It is the sum of Processor: % DPC Time for all processors on the computer, divided by the number of processors. System: % Total DPC Time is a component of System: % Total Privileged Time because DPCs are executed in privileged mode. DPCs are counted separately and are not a component of the interrupt count. This counter displays the average busy time as a percentage of the sample time.
11
File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
I could not find the maximum value of the Counter key and help key, so I could not repair
Last Counter and Last Help key as discribed at SQL 2005 help. Which item correspond to
maximum value of the Counter key and help key?
I tried to correct Last Counter and Help key as:
"Last Counter"=dword:0000149c (5276)
"Last Help"=dword:0000149d (5277)
But it also doesn't work.
yestarday there is an article released about the service pack for the service pack 2 for sqlserver wo downloaded before mar 5 , 2007.
but to my development server i didn't download sp2 yet. Ifs it safe to download the sp2 for sqlserver 2005 enterprise edition now??
thanks,
Hello,
I have a message that is validated using a schema.
If I send the message that is not compliant with the schema, the message is not enqueued on the target queue but it is send back to the Initiator queue and the message_body contains the description of the Error.
On the Initiator queue I have activated a SP that is I used to end the conversation and log the error.
One of the information that I need to log is the original XML message that causes the validation error so I can check it.
It seems that in the moment I'm on this SP, activated when there is something on the Initiator queue I have no memory of the original message or at least I'm not able to find it.
Any hints/helps??
Thank you very much!
M.B.
Hi, sorry but I don´t speak english, my problem:
I install Service Pack 3 to Sql Server 7, but the Store Procedure are missing now, please help me.
Any one know what is the lasted service pack for SQL server 6.5
Thank you very much.
Judy
Any one here knows what is the lastest service pack for SQL server 6.5?
Thank you very much.
Judy
Does Anyone know if there is a way to verify the SQL Service Pack Version on 7.0 on Windows 2000 Advanced server?
I'm getting this results for select @@version
Microsoft SQL Server 7.00 - 7.00.623 (Intel X86)
Nov 27 1998 22:20:07
Copyright (c) 1988-1998 Microsoft Corporation
Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 1)
Thanks
Rea
I installed Service Pack 5 on SQL 7.0 successfully, but when I go back to run @@version, it gives me Service Pack 2 which is the old pack. Does anyone know why and had an experience with this?? Thanks wonderful people!!!
View 4 Replies View RelatedHas anyone out loaded sp1 that can tell me if there are any issues that I need to be aware of?
View 1 Replies View RelatedI have a cluster server, with SP3 coming out I wanted to upgrade the SP2 I have right now, when I start SP3 installation it starts and quickly exits from the program. DO I need to uncluster the server before applying SP3? or there is a way arround it?
View 1 Replies View Relatedhas anyone had this experience before after we installed service pack 2 our jobs are taking about 10hrs, some run it says it's succesfull but it didn't update the tables.
View 2 Replies View RelatedHello,
I'm installing SQL Server 7.0 on my server, which service pack is good to intall? SP4, I've heard has many bugs? Pls. guide me.
Thanks.
Sejal
How do I determine which SP has been applied to a server.
@@version returns 'Microsoft SQL Server 6.50 - 6.50.416'
Thanks.
Anyone know where I can download the lastest service pack
for 6.5??
Hi,
I have installed service pack-1 on SQL SERVER 7.0
Standard Edition. After the pack is installed @@version is
still showing 7.00.623 instead of 7.00.699
HELP !!!
Thanks