Unable To Remote Connect, SQL Server, Error: 1326
Nov 18, 2006
SQL Express running on Server 2003 SP1, not a domain controller - but prior to installing SQL Express, I did dcpromo promote and then demoted it back to a workgroup server.
Connecting with Vista build 5600, Studio express 9.00.2047 with MDAC 6.00.5600.1638. Server 2003 MDAC is 2.82.1830.
I came across this article on the net:
http://www.developersdex.com/sql/message.asp?p=1867&ID=%3C309C7496-F36B-4398-9C52-322E6CB8DE3B%40microsoft.com%3E
Is my mis-matched versions of MDAC causing me this grief?
Otherwise, I have remote set up for TCP and Named Pipes, I've run sp_configure 'remote admin connections', 1; my login is set to SQL Authentication with everything granted. I've tried running the service as network, local and MachineAdministrator; ports are open per:
http://support.microsoft.com/kb/555585
I wanted to ask before I start replacing the MDAC on either the Vista or Server 2003 machine... If that's the problem, which version(s) do I change? to?
Full error message:
An error has occurred while establishing a connection to the server. While connecting to SQL Server 2005, this failure may be cuased by the fact that under the default settings SQL Server does not allow remote connecitons, (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 1326)
Thanks, John
View 7 Replies
ADVERTISEMENT
Oct 18, 2007
Hi all:
We currently have a production server (prodserver) and backup server (backupserver) in the same domain, and I am attempting to backup dbs from the production box on to the backup box using the following:
backup database db to disk = '\backupservere$ackupdb.bak' with init
when executing from SSMS, I receive the following error:
Msg 3201, Level 16, State 1, Line 1
Cannot open backup device '\backupservere$ackupdb.bak' Operating system error 1326 (Logon failure: unknown user name or bad password)
Here's where the issue lies for me:
Both the production and backup box are running services under the same domain accounts, let's call it "domainsqlagent"
domainsqlagent has domain admin rights on backupserver and prodserver
I can login to both the production and backup servers using the domain account, map drives, hit administrative shares, drag and drop files, etc between the servers
If I use xp_cmdshell to try and simply move a file between prodserver and backupserver, I receive the above error as well. However, if I open an cmd window and execute the move command from DOS, it will successfully move.
There is a development server on the domain as well (devserver) using domainsqlagent to run the service accounts, and I can successfully backup databases from dev to prod, dev to backup, backup to dev, backup to prod, prod to dev, but NOT prod to backup
Finally, if I create a maintenance plan in SSMS, I cannot create a connection to the backup server (error reads the connection may not be configured correctly or you may not have the right permissions on this connection)
The backup server was changed to a different domain (domain2) before I arrived here, but has been switched back now, rebooted, service accounts changed via Configuration Manager, services restarted (and rebooted again for good measure).
Does SSMS use a different security context to create the connections to remote servers? From all my tests, the domainsqlagent account has all the correct rights and is working OK. Could this be a network issue? The network admin and I have been banging our heads against a wall for the past couple of days, so if anyone has seen something like this, I'd appreciate any help.
Thanks,
Craig
View 3 Replies
View Related
Jul 22, 2005
My VS 2005 website project was connecting to a remote SQL Server. But after I move the database to the second SQL Server, I got the following error message from running my website project:
Named Pipes Provider: Logon failure: unknown user name or bad password.
I do everything same like what I did in the first SQL server:
Using “SQL Server and Windows� authentication and “System account�;
Create a domain account IIS_WPG;
Grant this IIS_WPG as db_owner for the database;
In web.config, add the name and password to the end of connectionstring;
Make sure the SQL Server has “Named Pipes� and “TCP/IP� protocols.
I have no idea what I can do else, anybody has suggestions?
View 3 Replies
View Related
Jul 13, 2006
Greetings:
We have a copy of SQL2k Report Services running on a Windows 2003 Server. But the database used by the Reports is actually on another box in our network. (This is a option you can use during install.) This setup worked fine for about a year but now neither the reports and ReportManager no longer run. The Reporting services Log error is:
System.Net.WebException: The underlying connection was closed: Unable to connect to the remote server.
In a browser we get the error:
---
"Directory Listing Denied"
"This Virtual Directory does not allow contents to be listed."
---
Turning on the option to list directory contents in IIS does not resolve the issue.
Anyone seen this creep up before? I am unaware of any changes to the machine's security in the last few weeks but something has obviously changed.
I can ping the remote servers where the DB's are stored.
I am using Windows Integrated Authentication.
I have a dev box with a similar configuration, except everything is hosted locally, and it runs fine.
Any ideas?
Thanks.
View 13 Replies
View Related
Apr 7, 2007
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_54_49.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:54:59:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
-------------------------------------------------------------------------------------------------------------------------------------------------
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_41_11.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:37:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:46:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:53:56:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: Unable to connect to the remote server
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!4/7/2007-10:54:02:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
View 3 Replies
View Related
Mar 30, 2007
Hi!
When trying to log into Reporting Services in SQL Server 2005 Management Studio, I receive the following error message:
TITEL: Verbindung mit Server herstellen
------------------------------
Es kann keine Verbindung mit 'RD2MWD000349' hergestellt werden.
------------------------------
ZUSĂ„TZLICHE INFORMATIONEN:
Unable to connect to the remote server (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
No connection could be made because the target machine actively refused it (System)
------------------------------
SCHALTFLĂ„CHEN:
OK
------------------------------
Has anybody had that problem before? Happens right after installation, no customisation of the SQL Server has been done yet. And I run the server on localhost.......
View 3 Replies
View Related
Jun 12, 2007
I've recently got a new webhosting account with hostinguk who have do the following:
We have created a SQL 2005 database for you named: DBCOX10289
and a system DSN named: DBCOX10289
To access your database you will need Microsoft SQL Server Management Studio / Express
If you do not have a copy of this you can download Microsoft SQL Server management Studio Express at the following location:
http://msdn.microsoft.com/vstudio/express/sql/default.aspx
In enterprise manager you should register the server: sql5.hostinguk.net
You will need to use the following login name and password when registering the server and accessing your database.
SQL 2005 username: COX10289
SQL 2005 password: password
To use this server within your web site code please ensure that you refer to the server as sql5.hostinguk.net
PLEASE NOTE: Do NOT use the IP address of this server directly as this will cause problems for you should we make network changes at any point in time.
I have tried and am in despair but still am unable to connect to the server. Running a XP machine In Administrative tools ODBC I have created a DSN called DBCOX10289 with the server name sql.hostinguk.net. upon completing the ODBC setup I get this:
Microsoft SQL Native Client Version 09.00.3042
Data Source Name: DBCOX10289
Data Source Description: Keystages
Server: sql5.hostinguk.net
Use Integrated Security: No
Database: (Default)
Language: (Default)
Data Encryption: No
Trust Server Certificate: No
Multiple Active Result Sets(MARS): No
Translate Character Data: Yes
Log Long Running Queries: No
Log Driver Statistics: No
Use Regional Settings: No
Use ANSI Quoted Identifiers: Yes
Use ANSI Null, Paddings and Warnings: Yes
I then click on test connection and get
Microsoft SQL Native Client Version 09.00.3042
Running connectivity tests...
Attempting connection
Connection established
Verifying option settings
Disconnecting from server
TESTS COMPLETED SUCCESSFULLY!
Whne I'm scrolling through the options in ODBC it can see all the other databases on the server.
When I then try register the server in SQL server management studio express
Servername: sql5.hostinguk.net
Authentication: SQL Server Authentication
Username: COX10289
Password : password
===================================
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
===================================
Login failed for user 'COX10289'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: sql5.hostinguk.net
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
------------------------------
I try this servername as well: sql5.hostinguk.netDBCOX10289 and still get
===================================
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
I can ping the servername and get the IP address
I can telnet the server and port 1433 and connect successfully
The hosting company do not support sql 2005 express
I have tried researching this as much as possible, all to no avail. What can
I do?
View 5 Replies
View Related
Mar 14, 2007
Hi,
I€™m using a Script Component in SSIS to call a Web Service. The web service is wrapped, using the wsdl tool. The package works, on my local enviroment. Script component calls the web service and returns the data. I€™ll move the web service to another server, web service as Anonymous access is enable. Deployed the Package on a SQL server. But, when excuting the package I get the below error. I can view and invoke the web method and see data even. SSIS is running under a NT AUTHORITYNetworkService account. I know that the problem is permission, but how would I resolve the issue.
Error:
OnInformation,SERVER,DOMAINSqlAdmin,MISPackage,{190832FB-4FF1-4ECD-BF53-4A49864089B4},{D7BF27CD-BDF1-418A-ABFE-BA0A24B921FB},3/14/2007 10:59:11 AM,3/14/2007 10:59:11 AM,0,0x,System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.Service.GetMISAccounts()
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.ScriptMain.CreateNewOutputRows()
Any Help will be appreciated
View 1 Replies
View Related
Jan 23, 2007
Hi all,
i am trying to consume an webservice which under secure layer (HTTPS)
eg: https://test.com/test.asmx
i'm connected thro' a proxy server.
when i use the same url in IE it works fine, but when i connect thro' http connection manager it always throws me a error saying "unable to connect to remote server "
can anyone provide me solution to over come this problem
View 1 Replies
View Related
Jan 14, 2008
Hello Everyone,
I have a Report Server setup on my laptop (XP Pro SP2). I have developed a report which I would like to view from a Windows Forms Application (VB.NET) using a ReportViewer. When I try it from the local machine it works correctly, but if I try to connect and preview the same report from my other PC (Vista Home Premium) I am getting the "Unable to connect to the remote server. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because the connected host failed to respond." error.
I have setup the Processing mode to Remote and correctly setup the ReportPath and ReportServerUrl using:
With rptRetEmp
.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Remote
.ServerReport.ReportServerUrl = New Uri("http://192.168.1.2/CPMReports")
.ServerReport.ReportPath = "/CPM_Reports/Test"
.ServerReport.Refresh()
.RefreshReport()
End With
Where CPMReports is the Report Server virtual directory and CPM_Reports is the folder where the report Test resides.
I do not know if this has anything to do with the fact that Vista Home does not have Report Services enabled or it is just a permissions problem. I have red several posts that describe similiar problems, but I could not find a solution.
Thank you for your help.
Daniel D.
View 1 Replies
View Related
Feb 20, 2008
Vista + SQL Server 2005
Reporting Service Configuration Tool: No Red Cross.
http://localhost/reportserver get this error:
HTTP Error 403.1 - Forbidden
You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run.
http://localhost/reports get this error:
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I googled but not found anything useful.
Thanks in advance!!!
View 8 Replies
View Related
Jul 21, 2015
Environment: SQL Server 2014 on Windows Server 2012 R2.
We have our availability group configured and working. However, when we try to connect to the AG listener from a remote server, we have to use the fully qualified domain name (FQDN) to connect. We'd like to be able to connect just using the host name. Interestingly, ping actually resolves the IP correctly for either.
View 3 Replies
View Related
May 30, 2007
Hello
I am able to connect to the server and most of the time I can't connect.
It is important to be able to connect so I can manage my mdf - database.
To test ... I disable the firework but I still can't connect 90% of the time.
Thank you in advance.
~ Peaches ~
View 3 Replies
View Related
Sep 25, 2007
Server Error in '/Dive' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this is the error message I found when I run my asp.net application and the connection string as follows:
<add key="ConnectionInfo" value="Server=(local);Database=Dive;Trusted_Connection=yes;" />
can someone tell me how to connect and how to specify username and password in Visual Web Developer 2005 Express Edition..........
I'm a little bit new on VWD 2005 I need an assistance on it.
View 4 Replies
View Related
Jan 3, 2008
We have a problem to connect to a specific database on our local network from a specific Vista machine. Several other XP and Vista machines are able to connect to the database without any problem. However, with the two latest Vista machines we received, it is impossible to connect to the database. In Microsoft SQL server Management studio express, we have the error 26 "error locating server/instance specified". We are sure the server name we entered is correct. We suppose the server is correctly configured as we are able to connect from other computers. From the machines that are not able to connect to the database, we can connect without problem to other databases. We also see the server, where the database is, on the network servers list in Microsoft SQL server Management studio. .
The version of the components are:
Microsoft SQL Server Management Studio Express 9.00.3042.00
Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205)
Microsoft MSXML 3.0 4.0 6.0
Microsoft Internet Explorer 7.0.6000.16575
Microsoft .NET Framework 2.0.50727.312
Operating System 6.0.6000
We verified we have the same version of components on the Vista machine from which the connection is successful.
The network database has the version 8.0.
We are usinng sql server authentification method.
We try to specify the IP address instead of the server name in the connection string. We also tried to specify the port.
We also tried to disable the firewall.
Unfortunatetly, we are not able to connect to this database. Any suggestion ?
View 3 Replies
View Related
Jan 23, 2004
I have loaded NT4 onto a machine with 256MB's of ram. I have put on SP6 and the hard drive is 80GB's in size. I then loaded in SQL Server 6.5 and set up my default database at 250MB's in size. I can ping all other computers on the network and they can ping me but when I try to register the database it give me a unable to connect error. This is the 10004 error. The error is Execomm and it says the DBPROCESS is dead. I guess thats cause it won't connect. The Sqlserver is running and so is the sqlexecutive running.
Help, Help, Help.
TIA
View 4 Replies
View Related
Feb 8, 2006
I am getting the following error:
Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Also, I am running the Upgrade advisor from my machine (SQL 2000) and trying to access the SQL 2000 db on another machine. So I do not have SQL 2005 in any machine.
Can anyone tell me whts wrong.
Pls Advice!!
Thanks
View 3 Replies
View Related
Jun 5, 2007
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
View 4 Replies
View Related
Apr 29, 2008
Hi,
I am trying to connect to SQL Server through Query Analyzer but getting following error: (SQL Server is at remote web server where i have my website hosted.)
Unable to connect to server [server IP]:
Server: Msg 6, Level 16, State 1
[Microsoft][ODBC SQL Server Driver][dbnetlib] Specified SQL server not found.
I have searched this forum for this error and performed following workaround as suggested in some threads-
1. checked and set "TcpPort" registry setting.
2. TCP/IP is enabled in Network Utility.
3. "start SQL server if it is stoped" checkbox is unchecked while connecting.
But, I am still getting the above error. Should i re-installed SQL Server 2000? Any help?
Thanks,
View 3 Replies
View Related
Jun 19, 2008
Hi all,
I am using SQL 2005 Express to store my databae on a remote server, I already set remote connections to Local and remote connections (Use TCP/IP only) and also allow it to listen all the ports. Also I disabled my firewall. Then In my web.config file I add the conncting string like below
<add name="ConnString" connectionString=" Server=123.xxx.xxx.xxxDEV11SQLEXPRESS; Database=xxx; User ID=tester; Password=test; Trusted_Connection=False" providerName="System.Data.SqlClient"/>
Then I got the following error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Any ideas? Thanks in advance.
View 5 Replies
View Related
Jan 5, 2007
Hi,
I have Windows XP Home Workgroup LAN.
I am treating one of the XP Home system as 'Server' and installed SQL Express 2005 SP1. Enabled remote connections access.
I have total 4 XP Home systems, out of which one i am treating as Server, from the rest 3 computers, 2 are successfully connected to the Server and able to access SQL Express without any problems. But the 3rd system is unable to communicate with the Server. I disabled all firewalls in this 3rd system but still unable to connect to the server. I am able to ping the server, browse for shared folders on the server. Except SQL Express remote connection, everything else in the network is accessible from this 3rd computer.
Can anyone help me on how to troubleshoot this 3rd computer sql express connection problem to the server.
I don't have any error message to provide here. It just says, unable to connect to sql server, verify username/password etc.
Is there any limitation on SQL Express remote connections ?
View 1 Replies
View Related
Mar 8, 2007
I have 2 servers: #1 -- SQL 2005 SP1 publisher ; #2 -- SQL 2005 SP2 subscriber
originally I had #1 as pub and dist but dist but killing my CPU so I was in the process of moving the dist to #2... Got it all configured and when I tried to add #2 as a dist for #1 it fails when I get to the administrative password screen... It give me an error about how it cannot connect with the given password but under that is says linked server failed.
Since it mentioned linked server I tried to connect via the previous linked server to #2 and it failed... I cannot connect to #2 anymore from #1. I can login directly to #2 and I can use osql to connect to #2 but linked server does not work. I tried all drivers and many configurations...
Any ideas??
View 1 Replies
View Related
Jan 29, 2008
I am not able to connect to Remote Distributor from Publisher using Administrative Link Password. I have configured the Distributor on 1 m/c and Publisher on another m/c. When i use the wizard to configure the publisher using remote distributor. I have also specified the same Admin Password link (distributor_admin) in the distributor m/c.
Â
I am getting the following message:
Â
TITLE: New Publication Wizard------------------------------
SQL Server could not connect to the Distributor using the specified password.
[URL]
------------------------------ADDITIONAL INFORMATION:
Connection to server [SANMENON] failed.OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "Login timeout expired".OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". (Microsoft SQL Server, Error: 21670)
[URL]
------------------------------BUTTONS:
OK------------------------------
View 12 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Nov 28, 2006
EXEC xp_cmdshell 'dir *.exe'
Msg 50001, Level 1, State 50001
xpsql.cpp: Error 1326 from LogonUserW on line 620
I have followed following document completely with no problem but yet system generate above error
http://www.support.microsoft.com/kb/890775
before that I used to get following error that is one of the described scenario in that document
Msg 50001, Level 1, State 50001
xpsql.cpp: Error 87 from GetProxyAccount on line 499
Configuration:
SBS2000 Premium (Includes SQL 2000)
User: a regular with PUBLIC access on MASTER
View 4 Replies
View Related
Sep 10, 2007
Hi,
iam having vs2005 installed on my machine and i also installed sqlserver2005 dev edition on my machine...Now iam devloping a Window Appplication in which I need to populate a grid from Sqlserver2000 (dev edition) which installed on remote (i.e another network)....when i try to run my application it gives me a error tht "Unable to connect to sqlserver2005".actaully i specified in my connection string to connect to Sqlserver2000 on the remote machine.
I feel to know how to enable remote connection on Sqlserver 2000.So tht i can access this sqlserver2000 from another machine
With regards
Mahender
View 1 Replies
View Related
Mar 20, 2000
Suddenly all of my logins through ODBC DSN are producing the 1326 error. I also cannot reach the server with the Net View tool, but I can Timbuktu
or PC Anywhere to the machine and work on it. This just happened today and seems to be a freak occurence.
Could an administrator have disabled the ability of Named Pipes to make a connection?
View 1 Replies
View Related
Mar 17, 2000
I have a stored proc that attempts to execute xp_cmdshell using a login other than 'sa'. The permissions have been given to the login to execute xp_cmdshell and the stored procedure executes perfectly within the query analyzer in EM. However, when attempting to execute the same stored proc in ISQL_W under a login with permissions for everything as dbo (other than Master) I get error 1326 for LogonUser on line 359. This is with the "xp_cmdshell - Use SQLExecutiveCmdExec Account for Non SAs" disabled (as described as a "workaround" on the technet). Microsoft acknowledged this as being a 'bug' to 'fix' and put a 'fix' in Service Pack 5a. The server that is experiencing this problem is running service pack 5. Is there any difference between the service packs and if so, will installing service pack 5a help me? And if not, what can be done to alleviate this problem?
View 1 Replies
View Related
Apr 23, 2008
Hi
I am trying to connect to SQL Server Managements Studio. However, I am encountering connection problems. Please help....
Error...
TITLE: Connect to Server
------------------------------
Cannot connect to MSSQL1.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Raj.
View 6 Replies
View Related
Oct 23, 2006
Hi all,I having problems connecting to my local database through my asp.net site. I'm able to connect to the database using Query Analyzer with the following connection properties:Server: localSql Server Authentication: checkedUser Name: saand the Password is left blankThis is the connection string i'm using on the website:Data Source=local;Initial Catalog=myDatabaseName;User ID=sa;Password=;This is the error i'm getting:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Any suggestions appreciated.Thanks
View 1 Replies
View Related
Jul 23, 2005
MS SQL Server 2000 SP3Windows XP SP2Error when try to debug in Query Analyzer:Server: Msg 504, Level 16, State 1, Procedure sp_sdidebug, Line 1[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect todebugger on HORNET (Error = 0x80070005). Ensure that client-sidecomponents, such as SQLDBREG.EXE, are installed and registered onEUGENE. Debugging disabled for connection 63.Tried:- 'Troubleshooting the Transact-SQL Debugger' ( Book on-line )- EXEC ... 'legacy_on'- firewall is disabledWhat else can be done ?Thanks , Eugene
View 1 Replies
View Related
Jul 11, 2007
Hi to everyone!
Here is my problem: I have SQLEXPRESS running with Windows Authentication on a "server" PC named "ASUS1", and I need to connect from a "client" PC named "Presario1", user "Mauro", connected through a peer network (I use a cross-over cable); both PCs belongs to the same workgroup named "RMT-WORK", and they can see each others shared folders without problems.
I have installed the connectivity components + Management Studio Express on Presario1, and enabled named pipes and TCP/IP protocols; then I've got SQL Browser running. I have also added the Login "Guest" on ASUS1SQLEXPRESS.
When I start Management Studio Express on Presario1 and browse for servers I can select "ASUS1" as database engine but when I try to connect I receive "Error 40: could not open a connection to SQL Server" (same result using SQLCMD); I have tried to add on ASUS1SQLEXPRESS a user "Presario1Mauro" with "CREATE LOGIN [Presario1Mauro] FROM WINDOWS" but I receive a "Windows user not found" error...
Can anyone help me?
View 6 Replies
View Related
Apr 15, 2006
Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
View 2 Replies
View Related
