Unable To Resolve Column Level Collations. Bulk-copy Cannot Continue
May 13, 2008
Hi,
When I try to execute a package I get this following error. I have a bunch of similar packages which runs fine on the same source(sybase) and destination(sqlserver 2005), just different tables. Only few of them fails and all of them have the same error of "Unable to resolve column level collations. Bulk-copy cannot continue". I checked for the dtatatype and length between source and destination, both are same. The user have all the required rights on the objects in both source and destination.
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to resolve column level collations. Bulk-copy cannot continue.".
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: Failed to open a fastload rowset for "testdb..tbl2". Check that the object exists in the database.
Some body can shed light on this?
Thanks
Karun
View 6 Replies
ADVERTISEMENT
May 14, 2008
Hi,
When I try to execute a package I get this following error. I have a bunch of similar packages which runs fine on the same source(sybase) and destination(sqlserver 2005), just different tables. Only few of them fails and all of them have the same error of "Unable to resolve column level collations. Bulk-copy cannot continue". I checked for the dtatatype and length between source and destination, both are same. The user have all the required rights on the objects in both source and destination.
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to resolve column level collations. Bulk-copy cannot continue.".
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: Failed to open a fastload rowset for "testdb..tbl2". Check that the object exists in the database.
On further trial and error I found that if I remove the fast load option, it works without glitch.
Its kind of wierd though....
Any body has faced this situation?
Thanks
Karunakaran
View 5 Replies
View Related
Feb 1, 2007
Hi~,
Before implementing memory based bulk copy insert with IRowsetFastLoad interface of SQL Server 2005 OLE DB provider, I want to know some considerations.
- performance : compared with T-SQL's "BULK INSERT ..." and bcp utility
- SQL Server's resource usage : when running memory based bulk copy, server resource's influence
- server side action(behavior) : when server is busy, delayed-update means IRowsetFastLoad::Commit(true) method can insert right after?
- row-count : The rowcount limitation can be inserted by IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit
- any other guide lines
View 1 Replies
View Related
Feb 15, 2007
Hi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)?
For example, how much insert row at below sample?(the max value of nCount)
for(i=0 ; i<nCount ; i++)
{
pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData));
}
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ?
BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
-------------------------------------------------------
My solution is like this. Is it correct?
// CoCreateInstance(...);
// Data source
// Create session
m_TableID.uName.pwszName = m_wszTableName;
m_TableID.eKind = DBKIND_NAME;
DBPROP rgProps[1];
DBPROPSET PropSet[1];
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BSTR;
rgProps[0].dwPropertyID = SSPROP_FASTLOADOPTIONS;
rgProps[0].vValue.bstrVal = L"ROWS_PER_BATCH = 10000,TABLOCK";
PropSet[0].rgProperties = rgProps;
PropSet[0].cProperties = 1;
PropSet[0].guidPropertySet = DBPROPSET_SQLSERVERROWSET;
if(m_pIOpenRowset)
{
if(FAILED(m_pIOpenRowset->OpenRowset(NULL,&m_TableID,NULL,IID_IRowsetFastLoad,1,PropSet,(LPUNKNOWN*)&m_pIRowsetFastLoad)))
{
return FALSE;
}
}
else
{
return FALSE;
}
View 6 Replies
View Related
Nov 30, 2006
I get the message when loading the bcp. I check the path variable and the sqlserver BINN directory is there, but twice. If I try opening the command window and write bcp, I get the error, if I enter the whole path c:...80 oolinncp there is no problem. I wonder what could it be?
I've manually reinstalled many times but still having trouble.
Thanx in advance
SQL SERVER 2000 or SQL SERVER 7 (I've tried with both)
WINDOWS XP
View 2 Replies
View Related
Mar 3, 2005
Hi there.
Is there any way to update the system tables directly, to alter the collations of the columns in the user db's?
I've tried the script below:
UPDATE Syscolumns SET collation = 'SQL_Latin1_General_CP1_CS_AS' WHERE name = '<AddrCode>'
AND id = object_id('<Compliance>')
but, I get the following error message:
Server: Msg 271, Level 16, State 1, Line 1
Column 'collation' cannot be modified because it is a computed column.
Can you please help me! I need to do thousands of these, and most of them has constraints on, so my script I generated to do the ALTER TABLE.... ALTER COLUMN does not suffice.
Thanks.
View 2 Replies
View Related
Jan 16, 2008
I want to perform column level and database level encryption/decryption....
Does any body have that code written in C# or VB.NET for AES-128, AES-192, AES-256 algorithms...
I have got code for single string... but i want to encrypt/decrypt columns and sometimes the whole database...
Can anybody help me out...
If you have Store procedure in SQL for the same then also it ll do...
Thanks in advance
View 1 Replies
View Related
Dec 15, 2006
dear friends,
i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :
--------------------------------------------------------- Beginning of Error Message --------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message --------------------------------------------------
then when i checked the Machine.config file, i found this....
<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or 2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh
View 2 Replies
View Related
Jan 24, 2007
Hi i followed Microsofts "Implementing Row-and-Cell-Level Security in Classified Databases Using SQL Server 2005"
this works fine when i insert delete data on a normal script (mangement studio)
my project runs in a SSIS package, different users. i cannot do a bulk insert using OLEDB data Destination i get the following error
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Conflicting locking hints are specified for table "dbo.tblUniqueLabelMarking". This may be caused by a conflicting hint specified for a view.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Conflicting locking hints are specified for table "dbo.tblUniqueLabelMarking". This may be caused by a conflicting hint specified for a view.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Conflicting locking hints are specified for table "dbo.tblUniqueLabel". This may be caused by a conflicting hint specified for a view.".
Error: 0xC0209029 at Data Flow Task, OLE DB Destination 1 [1741]: The "input "OLE DB Destination Input" (1754)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (1754)" specifies failure on error. An error occurred on the specified object of the specified component.
View 6 Replies
View Related
Feb 1, 2006
hi..
how to use bulk copy in MS SOL Server?
View 1 Replies
View Related
Dec 7, 2000
Hi,
I have a question...As per my knowledge bulk copying is not possible during the backup operation. If backup starts first backup will go and bulk copy will fail or bulk copy starts first backup fails and bulk copy will continue...
Today I was testing bcp to run in dts using the EXCUTE PROCESS TASK (with this task we run any Win32 Excutable or batch file). I am trying to bcp out from one database(source) and bcp in to another database(destination). While running this package backup also running...
I have started the database (destination) backup job and it was running and I started another job to run the dts (even I ran dts manually). Both the josbs succeeded and inserted the data into the table....
Can any one shed some light on this ....
Thanks,
Mohammed.
View 2 Replies
View Related
Jan 19, 2000
Hi!!
Is it possible to avoid transaction log generation throught DTS?
How?
Thanks,
Fabio
View 1 Replies
View Related
Apr 12, 1999
I want to bulk copy a table using 'SELECT INTO'
from a database in server1 to a database in server2.
The 'FROM' part of the select into only allows three
parameters 'database, user & table' within the the one server.
I remember seeing some option that allows one to
bulk copy across servers but cant find it ?????
View 1 Replies
View Related
Mar 26, 2001
hi , I am using command line for bulk copy operation. I do have a couple of tables with some triggers to move data from one table to another on an insert trigger, I was just wondering, Is those triggers going to fire when I import data into the tables using bcp command line?
Thanks for your help
Ali
View 1 Replies
View Related
Mar 21, 2008
bcp.exe northwind..products out "c:w_products.txt" –c -T
I am running this line of code, but I get an error. The error is:
Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near '.'.
why? Please help...
Thanks
View 6 Replies
View Related
Nov 1, 2007
Salam
What the permission required for Bulk copy
View 1 Replies
View Related
Mar 8, 2006
Hi:
I am doing a full snapshot on couple of subcriptions but getting this message from last couple of days. I have to do this at night because tables are very large so it does not block the users. I am not sure which table this error is happening. It used to work fine but from last couple of days this has started to happen. I need to re-sync my subscription database with production database but some of the tables are giving problem.
The process could not bulk copy out of table '[dbo].[syncobj_0x3735393934363031]'.
I/O error while writing BCP data-file
(Source: ODBC SQL Server Driver (ODBC); Error number: 0)
---------------------------------------------------------------------------------------------------------------
Please let me know.
Thanks
View 4 Replies
View Related
Oct 10, 2007
With the following I try to save the content of an excel-sheet to a sql table. This works perfectly with SQL Server Express but not with MSDE, which I would need also. Here the code:String rootPath1 = Request.MapPath("~/Kontoauszug.xls");
String strConn = "Provider=Microsoft.Jet.OLEDB.4.0;" +"Data Source=" + rootPath1 + ";Extended Properties=Excel 8.0;";
OleDbDataAdapter da = new OleDbDataAdapter("SELECT * FROM [Mappe1$]", strConn);DataTable dtCustomers = new DataTable();
da.Fill(dtCustomers);
string ConnectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ToString();using (SqlConnection destinationConnection = new SqlConnection(ConnectionString))
{
// open the connection
destinationConnection.Open();using (SqlBulkCopy bulkCopy = new SqlBulkCopy(destinationConnection.ConnectionString))
{
bulkCopy.BatchSize = 500;
bulkCopy.BulkCopyTimeout = 90;bulkCopy.DestinationTableName = "dbo.Auszug";
bulkCopy.WriteToServer(dtCustomers);
bulkCopy.Close();
}
}
With MSDE I see the following error-message
Fehler bei der Anmeldung für den Benutzer 'sa'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Fehler bei der Anmeldung für den Benutzer 'sa'.Source Error:
Line 148:
Line 149: // Write from the source to the destination.
Line 150: bulkCopy.WriteToServer(dtCustomers);
Line 151:
Line 152: Source File: d:InetpubWww_rootXXXXXXXXXXXXXXXXXXXXXXXX.cs Line: 150 Stack Trace:
[SqlException (0x80131904): Fehler bei der Anmeldung für den Benutzer 'sa'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.SqlClient.SqlBulkCopy.CreateOrValidateConnection(String method) +64
System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount) +42
System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState) +176
System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table) +6
admin_Default.Button4_Click(Object sender, EventArgs e) in d:InetpubWww_rootetzregister.deconsumeropinionadminDefault.aspx.cs:150
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
The connection to the database works perfect also on MSDE on all other parts of the project.
Can anyone help me wit a solution or an idea?
View 1 Replies
View Related
Feb 24, 2001
Can I still use bcp comman to export data into a table when the target table has a referential integrity with another table ( parent child relationship ) .. thanks
Ahmed
View 1 Replies
View Related
Jun 11, 2004
Hi Techies,
I have a bcp which generates .txt file perfectly. I just wanted to know how can i generate a text file in distributed environment.
Assuming that my Sql Server is running in machine A. I wanted the bcp to generate in Machine B. What are the permission's i should give in order to generate it in Machine B.
Regards
--Tanveer
View 3 Replies
View Related
Dec 6, 2004
Dear All,
Can anyone tell me what's the best/easiest way to copy one column of data from one table to another column of another table.
Thanks in advance.
View 3 Replies
View Related
Mar 31, 2004
Hi there,
I'm in dire need for a solution to a "Bulk Insert" problem.
Environmental: SQL 7
The unc path used is a shared folder on the local machine with full rights.
This is the SQL Table:
CREATE TABLE [dbo].[ArgiefTransaksies] (
[TakDepotKodeRef] [char] (4) NULL ,
[HoofraamNommer] [varchar] (2) NULL ,
[Dokumentnommer] [decimal](2, 0) NULL ,
[DataLyn] [varchar] (133) NULL)
Here is the file that I try to upload, TESTFILE.PRN
RZGB|FT|12| |
RZGB|FT|12| |
RZGB|FT|12| |
RZGB|FT|12| |
RZGB|FT|12|This is a test|
RZGB|FT|12| |
RZGB|FT|12|Zone 1Zone 2|
RZGB|FT|12|Hello World||
RZGB|FT|12| 5 leading spaces|
RZGB|FT|12|Tab(10) - Hello|
Here is the SQL statement that I try to use:
Exec sp_dboption 'VKBTakDev', 'select into/bulkcopy', 'TRUE'
BULK INSERT ArgiefTransaksies
FROM '\HKDATA060XPPublicTESTFILE.PRN'
WITH
(
DATAFILETYPE = 'char',
FIELDTERMINATOR = '|',
ROWTERMINATOR = '|',
MAXERRORS = 0,
CODEPAGE = 'raw'
)
Here is the error that I keep getting...
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'STREAM' reported an error. The provider did not give any information about the error.
The statement has been terminated.
Regards
View 2 Replies
View Related
Nov 2, 2006
hi all,
i am beginner in .NET visual programming using C#.NET with SQL Server 2005
i am facing a problem in SQL Server. suppose I have a table given below..
------------------------------------------------
Table name is "A"
------------------------------------------------
1 Michle Administrator
2 John Consumer Finance Officer
3 Jackson Employer
4 Goeffery Empl0yer
------------------------------------------------
Here the identity column is the first one. Now if i delete the 2nd row the this table becomes like that
------------------------------------------------
Table name is "A"
------------------------------------------------
1 Michle Administrator
3 Jackson Employer
4 Goeffery Empl0yer
------------------------------------------------
Now i have an another table "B" having same structure (3 columns and first column is the identity column). Now if i move the all the data from table "A" to table "B" then the original seqeunce is distrubed the table "B" contains the data like this.
------------------------------------------------
Table name is "B"
------------------------------------------------
1 Michle Administrator
2 Jackson Employer
3 Goeffery Empl0yer
------------------------------------------------
but i need that what ever the first column is identity column but sequence of numbering must be same as the numbering in the table "A" to preserve the relationships.... like that...
------------------------------------------------
Table name is "B"
------------------------------------------------
1 Michle Administrator
3 Jackson Employer
4 Goeffery Empl0yer
------------------------------------------------
waiting for ur responce. i will very thankful to you to solve my problem.
Note:- the is moved using SQLBULKCOPY command.....
Thanks....
God Bless u By all means.
View 4 Replies
View Related
Jul 17, 2007
Hello
I need to copy from excel table to SQL 2005 publication (many record > 1000)
How can i do this. Bulk copy? or ...
I have experience problem with bulk copy so how can i manange it for my own needs.
View 1 Replies
View Related
Jan 25, 2002
We have bulk copy option enabled for our DB and we really use it. Will it be possible to set up a snapshot replication over the Internet of particular tables to a remote server from which the data will be only retrieved and never changed? Also, is it necessary to have PKs in all tables for this one-way snapshot replication? (for transactional replication it is needed, as I know)
Thanks a lot!
Andy.
View 2 Replies
View Related
Aug 1, 2000
Hi,
I am working on sql server bulk copy program. I am getting data files from
our vendors for shares and stocks. The data files are pipe separated values.
for ex the Ascii file format is
8388182|"ACC consultanats"|"rating for the current financial year"|23
My doubt is i have four columns in my sql server table named stocks.
table structure
---------------
serialno numeric
caption nvarchar(255)
memo1 ntext 16
sno int
In this the third column named memo1 in the data file would be a large
volume data. That is it may be upto one full A4 size page.
One important thing is, data in the third column is not formatted.
Since it is very urgent, let me know what would be the format file for
this type of data file and the bulk copy program utility.
Kindly let me know as early as possible.
Regards
Sivaramakrishnan
View 1 Replies
View Related
May 4, 2000
Hi, I am have a text file that contain row header. I want to export this text file into pub database to the author table. I usually use this code:
Exec master..xp_cmdshell "bcp pubs..authors in d:dataauthors.txt /c /Snameofserver /Usa /Ppassword"
from sql analyser window. it the text file does not have a header, I am able to export the data, but if the text file Does have a header, I got an error, I know that I can open the text file and delete the header then run the bcp process. But I do not want to do so, IS there a code that I can add to the bcp code above to accept the header row and have a successful bcp procedure. thanks
View 3 Replies
View Related
Aug 12, 1999
Is it possible to Export a SQL passthrough query to a text file
Like
@A1 int
bcp '"select * from bank where id = @a1" query out ....... "
Or I have to use sth. like SQLDMO ???? But I dont know how to do it ..
Please Helpppppp
Edwin
View 2 Replies
View Related
Jan 8, 2003
Can someone confirm that setting a db to use the simple recovery model in sql server 2000 is the same as setting a db to user trunc. log on checkpt. and select into/bulk copy on sql server 7?
View 3 Replies
View Related
May 24, 2007
Hi guys,in my db i have these three tables1.Stores 2.Products3.Partstheir structure is something like :Stores ----Products ----PartsStores----------------StoreId, StoreNameProducts----------------ProductId, StoreId, ProductNameParts----------------PartId, ProductId, PartNamenow, in my application i wanna to implement a bulk-copy operation souser can copy products from one store to another one and when aproduct copied to new store;all of it's parts should copy too.in fact i need a method to insert a Product item in Products table andsynchronously copy it's parts into Parts table and repeat this stepsuntil all of proucts copied.how can i do that without cursors or loops ?Thanks
View 19 Replies
View Related
Apr 20, 2007
I'm trying to start a new publication. When the snapshot agent runs, it stops on a table with the error "Bulk Copy Failed". If I remove the table from the publication, it just moves the error to the next table it tries to copy. What could cause a bulk copy to fail during a snapshot?
View 4 Replies
View Related
May 29, 2007
Hi ,
I got a problem in regarding Transactional Replication.
Let me explain my scenario.
I€™m doing transactional replication between two databases.
When publisher and subscriber created the data going to be bulk copied from publisher table to subscriber table.
My main intension was to create replication between different tables with different fields in which I got succeeded.
But main problem is I want to stop this bulk copy from publisher to subscriber.
Scenario 1: my subscriber table may contain some previous data which will be replaced with publisher data due to bulk copy.
I don€™t want this .I want to avoid this bulk copy and wants to create procedures(for insert, update and delete transactions) in subscriber which will take care of replication.
I achieved almost everything but not able to avoid this bulk copy during the creation of subscriber.
As I know the only way I can stop bulk copy is by creating subscription without subscription agent. But here without subscription agent the procedures(for insert, update and delete transactions)
won€™t get created in subscriber.
Help me regarding the above scenario and I need it urgently.
View 1 Replies
View Related
Jul 11, 2007
Hi,
I have a set of records in application memory seperated by a record terminator ''. I can write the memory stream to a local disk file and call bcp api functions to load the file in to SQL server. But how do I transfer the in memory data directly to the SQL server, without writing to a data file, using ODBC. I am not using any .Net Framework classes in my code. The SQL server and application server(generating the data records) are on two different physical servers connected through network. I am trying to figureout the fastest and efficient way to load the data to SQL server from a remote application server. Thanks for your help.
Srini
View 1 Replies
View Related
