Unable To Restore Databases From Tape: Timeout Exp

Jul 6, 2007

I'm trying to test my backups by restoring from production onto a DEV machine.

However, when I insert the backup tape into the drive, then go into SSMS and right click on
Databases -> Restore Database -> From Device .... -> Tape -> Add -> (my tape drive \.Tape0) -> Contents
it displays the contents as it should.

So I click "Close" to close the contents and bring me back to the Specify Backup where I have \.Tape0 selected and I then click "OK"
SSMS sits for a few seconds, and then I get a time out error message:

TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3054&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------


That's all the further I can get... any suggestions?

I'm VERY perplexed by this...

View 2 Replies


ADVERTISEMENT

Unable To Restore Databases From Tape: Timeout Expired. The Timeout Period Elapsed Prior To Completion Of The Operation Or The

Jul 6, 2007

I'm trying to test my backups by restoring from production onto a DEV machine.



However, when I insert the backup tape into the drive, then go into SSMS and right click on

Databases -> Restore Database -> From Device .... -> Tape -> Add -> (my tape drive \.Tape0) -> Contents

it displays the contents as it should.



So I click "Close" to close the contents and bring me back to the Specify Backup where I have \.Tape0 selected and I then click "OK"

SSMS sits for a few seconds, and then I get a time out error message:

TITLE: Microsoft SQL Server Management Studio
------------------------------

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------
ADDITIONAL INFORMATION:

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3054&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------






That's all the further I can get... any suggestions?



I'm VERY perplexed by this...

View 11 Replies View Related

Tape Restore Help....

Dec 17, 1999

hi,
We have a service provider that handles the SQL database for us. And every month we will receive a Tape backup of the updated database from them for in house development purpose.

Anyways, I tried to restore the Tape backup I recently received and I kept on getting this error message: "The media family on device 'Tape0' is incorrectly formed. SQL Server cannot process this media family. Backup or resotre operation terminating abnormally."

I have set the Complete Database backup and the Overwrite option for this particular restore. Please help, any idea is apperciated.

Thanks,
Ray

View 1 Replies View Related

Can't Restore DB From DAT Tape

Oct 30, 1998

Just for background info: I am trying to take a backup of a DB made from a Server(#1) located on a client site and restore to a server that is in house Server(#2). Both servers are running SQL Server 6.5 and all configuration settings are the same except Server(#1) has (DB Lib Ver 6.50.213) and Server(#2) has (DB Lib Ver 6.50.201).

When I try to restore the DAT tape (backup made from Server #1) onto Server #2 I get these errors in this order:
1st --[DB-Library] Unexpected EOF from SQL Server. Connection broken.--
2nd --Error 605 [SQL Server] Attempt to fetch logical page 72915 in database 'DBname' belongs to object '0', not to object 'sysobjects'.--

Does anybody have any ideas and what could be causing these errors?
Would the different DB-Library versions cause these errors?

I know the tape isn't corrupt because the tape can be used to restore on Server(#1).

Any ideas would be greatly appreciated!

View 1 Replies View Related

Unable To Backup To Tape Drive

Dec 17, 2007

i have taken full database backup on tape drive one week ago,by automated scripts ,now when i check the maintenance plan history , it says the task failed and gives a message that unable to open the \. ape0 ,with error


([Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3201: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open backup device '\. ape0'. Device error or device off-line. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.
)

View 4 Replies View Related

Restoring Sql Express And Databases From Tape Backup.

Sep 15, 2006



Hello,

I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.

I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task scheduler on the server before the disaster recovery.

However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task scheduler and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.

----------------------------------------------------------------

Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....



Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.

----------------------------------------------------------------------

My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.

Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.

I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.

This is some kind of issue with SQL Server Express being restored by tape backup.

Any suggestions, thanks.

View 5 Replies View Related

Backup And Restore Using Tape - Strange Result

Feb 24, 2000

Hi
I have two database called test1 and test2 both are of same size(both device and log). I run the following statements to take the backup of both the databases using the tape device 'tapedevice1'. dump database test1 to 'tapedevice1'
dump database test2 to 'tapedevice1'
After this I run the load statement
load database test2 from 'tapedevice1'.
It just restore the database test2 with test1 data which is added first to the tape with a warning.
Is there any restriction that in a single tape backup of more than one database is not possible.
Your valuable suggestion appreciated
Jiji

View 1 Replies View Related

SQL2005 Restore Database From Media Tape Terminate Abnormally!

Apr 11, 2007

I backup the database into tape0 using management studio and can see the contents in the backup media.

However when I tried to restore, the error "timeout expired" appears and sometimes together with the error "restore headeronly is terminated abnormally".



Please advice and thank you in advance!



Below is the error message:

===================================

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------
Program Location:

at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteWithResults(String query)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSqlWithResults(Server server, String cmd)
at Microsoft.SqlServer.Management.Smo.Restore.ReadBackupHeader(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseGeneral.buttonSelectDevice_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

===================================

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (.Net SqlClient Data Provider)

------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476

------------------------------
Server Name: NTSRV1
Error Number: -2
Severity: 11
State: 0


------------------------------
Program Location:

at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)

View 3 Replies View Related

SQL 2012 :: Backup Cluster Databases Directly To Tape Using Native Backups?

May 5, 2015

Can we backup our cluster databases directly to tape using native backups (without using any third party tool) ? It's SQL Server 2012 two node Active/Passive cluster. One of the DB will be huge in size, hence checking if we can directly backup from the cluster instance to a tape.

View 7 Replies View Related

Unable To Trigger A Timeout

May 28, 2008

I have an asp.net 2.0 app that uses sql server 2005.  My connection string is "Data Source=MyDbServer;Initial Catalog=MyDbName;Integrated Security=True;Connection Timeout=30".  I wanted to make sure the app would properly detect when the database was unavailable at login, so I put a try/catch around the C# code that calls an SP to verify the user's credentials.  To test, I turned off the sql services on the db server.  But when I run the app and try logging in, my app NEVER times out!?!  "NEVER" meaning I quit waiting after 45 minutes.  Even more strange (to me) is, when I change the compilation debug setting in web.config to "true", then it DOES time out exactly the way I want (and my Try/Catch captures the error and I can give the user a nice message).  BUT... I don't want debug="true" -- I read it's much better to have this set to "false" in production systems.  Any ideas why the connection just keeps trying and not giving up (when debug="false")??
Thanks for any help.
Greg
 

View 6 Replies View Related

911: Timeout When Trying To Restore DB

Apr 5, 2001

Friends:
I've lost one critical table (stupid me and SM). I want to restore DB from the backup under another name, then get the table transferred to my live DB.
I've tried it on my testing server and it worked out, but no matter what I do, it doesn't work on my live server.

I get the message SQL-DMO SQLState: "Timeout expired". I cannot figure out what is different between 2 servers.

Remarkably, I cannot Verify the backup at all even I backup Transaction Log. Same "Timeout expired".

Please, help.

View 3 Replies View Related

Timeout In Copy Databases

Oct 17, 2006

Hello and thanks in advance for help,

I have configured several jobs in the SQL Server Agent which do a copy of databases from a cluster of SQL 2005 to another SQL 2005 server. I did these from the "Copy Dabatase Wizard". When I run these it works fine with "small" databases but with the two bigger ones I get the following error after 10 minutes since execution started:

Event Name: OnError
Message: An exception occurred while executing a Transact-SQL statement or batch.
StackTrace: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(StringCollection sqlCommands)
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSMOTransfer()
InnerException-->Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
StackTrace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)
Operator: DOMAINuser
Source Name: CLUSTERSERVER_BACKUPSERVER_Transfer Objects Task
Source ID: {3CF47485-1035-40E7-86C4-D679E253D38D}
Execution ID: {A10C4E99-0B35-416C-A560-81DB2C2D92C4}
Start Time: 11/10/2006 17:45:11
End Time: 11/10/2006 17:45:11
Data Code: 0

Any idea about the solution?

Regards,

Jorge

View 5 Replies View Related

RESTORE DATABASE Timeout In SQL 2000 With Large Backup Files

Sep 11, 2007



Hello,

I am attempting to restore the database from within VB.NET application I am making the following 3 calls:

RESTORE FileListOnly FROM DISK = 'C:MyDatabase.dat'

USE Master RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat' WITH NORECOVERY, MOVE 'MyDatabase' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataMyDatabase.mdf', MOVE 'MyDatabase_log' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataLDFMyDatabase.ldf', REPLACE

RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat'


using SMO. This logic works fine with small *.dat files, however when using *.dat file of about 4Gb I get an error on the 3d restore database call:



ExecuteNonQuery failed for Database 'master'.

An exception occurred while executing a Transact-SQL statement or batch.

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Operator aborted backup or restore. See the error messages returned to the console for more details.

ExecuteNonQuery failed for Database 'master'.

An exception occurred while executing a Transact-SQL statement or batch.

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Operator aborted backup or restore. See the error messages returned to the console for more details.



The same program/logic also works fine when I use MS SQL 2005 and it runs fine from MS SQL 2005 Query Analyzer for both 2005 and 2000 databases. There seem to be only problem with MS SQL 2000 from within VB.NET. Anybody has any idea? I'd appreciate any response. Thanks

Eugene

View 6 Replies View Related

Unable To Restore To Other DB ?

Jul 22, 2004

Hi,

I have every nights a backup script that is running using the following command on my sql server 2000 :

backup database MYDB to disk="d:mssql2000MSSQLBACKUPdb_MYSERVER_MYDB.bak" with init

Now, i need to restore one of these files to a new Database with another name...in order to look at certain table and its content

I'm unable to find the correct RESTORE command and didn't find how to do it using enterprise Manager..

Any help would be VERY welcome ;-))

Florent -- Near the whole

View 6 Replies View Related

Unable To Add More Then 59 Mirrored Databases

Sep 24, 2006

The following problem occurs when trying to mirror multiple databases using SQL Server 2005:

After mirroring about 40 databases, an error occurred concerning a lack memory availability on the mirror-server.
I added the parameter /3GB to the boot.ini file and enlarged virtual memory space.

Now I was able to mirror a total of 59 databases. When trying to add the 60th database on the principal server, it won't get through.
I don't get any error message, neither the mirror starts.
However the SQL Server Management Studio on the mirror-server doesn€™t seem to respond to any commands given until the mirror is again removed for one or more databases on the principal server.
Adding the parameter /PAE to the boot.ini file, or enlarging the virtual memory again didn't bring the solution.

Both principal- and mirror-server are dual processor servers.

The principal is a Windows 2003 Server Standard x64 Edition service Pack 1 and runs:

SQL SERVER 2005:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790

It has 4GB of memory.

The mirror is a 32-bit Windows 2003 Server Enterprise service Pack 1 and runs:

SQL SERVER 2005:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790

It has 2GB of memory.


Is there a work-around for this problem?

Thanks for any help in advance.

View 2 Replies View Related

Unable To Restore Users!! Pls Help

Oct 4, 2004

Hi All,
Greetings,
Sql server 7

I am trying to restore a database of sql server 7 to another. Restoring is happening fine with respect to tables, stored procedures etc, but i am not able to restore the users that are present in the source database.

Please help in this.

TIA

View 1 Replies View Related

Unable To Specify UNC Path For Restore Through GUI??

Feb 24, 2007

Hi,After just installing sql 2005 on our test machine, I am trying torestore a database using a backup file on the network. However, thespecify backup diagol box allows only for browsing to a file on thelocal machine - I find no way to type a UNC path to choose the backupfile from. I can do this in 2000, is it no longer an option to doitthrough the GUI or am I missing something?ThanksKR

View 1 Replies View Related

HELP!!! Unable To Back Up Databases In SQL Server 7.0

May 11, 2001

Hi,

I am using SQL Server 7.0.

I have sa rights.. I went to the Enterprise Manager and choose a Server and under that server choose a database.

Then I clicked "New Maintenance Plan" and set up a Backup plan for my database.

The problem when I checked the next day the database was not backed up. I have tried this on other database and it has always worked. Why is it not working now? There is enough space on the Drive I am backing to.

Am I missing something?

Thankx

KP

View 1 Replies View Related

Unable To See The Databases From Enterprise Manager

Dec 27, 2005

IN the enterprise manager I could see my database server but could not see the databases.Bur I can see the databases and database objects in quesry analyzer. What should be the problem and how can see the databases from my enterprise manager.
Thanks.

View 2 Replies View Related

Restore Databases Under SQL 6.5

May 18, 2004

Hello,

I'm running SQL 6.5 on an old NT4 server. I built a new W2K server with SQL 6.5.

When I tried to restore a database to the new server I got the following error: "The database you are attempting to LOAD was DUMPed under a different sort order ID (52) than the one currently running on this server (32), and at least one of them is a non-binary sort order."
Since SQL 6.5 is no longer supported by Microsoft, I have a hard time finding information related to that error. Can someone help me and tell me what's wrong?

Regards,
Toan.

View 5 Replies View Related

Restore Databases 7.0

May 17, 2007

I have taken backups of 3 datbases

as

man1.dbf

msdb,model databases on drive d: but not taken master datbases then i had to format the c: on which sql server installed.

can i take full restore in this case or i have to create datbases and then sp_attach and sp_detach databases pls help me.

View 3 Replies View Related

Unable To Restore The Database Backup

Apr 22, 2006

Hi,

I took the backup of a database (called students) from one of the machine on our LAN and then tried to restore it on another machine but am unable to restore the database. Below are some details of the problem I am facing:

- The machine on which I am trying to restore the database (i.e. target box) previously had a database by the same name (no it was not a replica). I had deleted this database from the target box before trying to restore the database (of the same
name and which was backed-up from the source box)

- When trying to restore (via EM) I get a VERY LONG dialog box with lots of details. Below are some details of what this dialog box says:

The title of the database is MS SQL-DMO (ODBC SQL State: 42000) and It says "The physical name 'C:Program Files.....datastudents.mdf' may be incorrect. File 'students_Data' cannot be restored to 'C:Program Files.....datastudents.mdf'. Use with MOVE to identify a valid location for this file.

And the dialog box provides similar details related to 'students.ldf'
Can u please help me with this.

View 3 Replies View Related

Restore Database When Unable To Connect?

Feb 23, 2005

Hey

Quick question for the experts here! Wink

We have the issue of wanting to restore an MSSQL database (.BAK) but are unable to "Connect" to the existing database; but we are able to "Start" the database currently.

When we are unable to perform a "Connect", then under "All Tasks" you don't get the option to "Restore Database"

I am hoping there is a way around this and still a possibility of doing a restore without having to do an entire install of MSSQL again and then a restore?

Thanks!

View 2 Replies View Related

Unable To Restore The Database Backup

Apr 23, 2006

Hi,

I took the backup of a database (called students) from one of the machine on our LAN and then tried to restore it on another machine but am unable to restore the database. Below are some details of the problem I am facing:

- The machine on which I am trying to restore the database (i.e. target box) previously had a database by the same name (no it was not a replica). I had deleted this database from the target box before trying to restore the database (of the same name and which was backed-up from the source box)

- When trying to restore (via EM) I get a VERY LONG dialog box with lots of details. Below are some details of what this dialog box says:

The title of the database is MS SQL-DMO (ODBC SQL State: 42000) and It says "The physical name 'C:Program Files.....datastudents.mdf' may be incorrect. File 'students_Data' cannot be restored to 'C:Program Files.....datastudents.mdf'. Use with MOVE to identify a valid location for this file.

And the dialog box provides similar details related to 'students.ldf'
Can u please help me with this.

View 1 Replies View Related

Unable To Restore Database Backup.

Sep 21, 2007



I am trying to restore a SQL Server 2005 database backup file.The size of the database backup is 5.51 GB. I specify the source as a device and then provide the path of the .bak file and press OK i get the error as follows





TITLE: Microsoft SQL Server Management Studio
------------------------------

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------
ADDITIONAL INFORMATION:

The media family on device 'G:ITWeb DB BkupDB BkupNew BkupWSS_Content_ITWEB.bak' is incorrectly formed. SQL Server cannot process this media family.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3241&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------


Please let me know how we can solve this issue.

Satish

View 5 Replies View Related

Unable To Restore Database Backup

May 13, 2008

Hello,

My name is Elizabeth and I'm a SQL newbie.

So we do SQL 2005 Database backup daily. At one point, we have to restore the backup. However, we cannot restore it whatsoever; it keeps saying that the database is in use.

It is actually a SQL Database for a CRM Server. I stop the internet service, so CRM or any other instances cannot pull up information from the SQL Database. I try running sp_who and killing the processes that are still using the database, but those processes keep coming back again.

Here is the error that I keep getting.



Could anyone please help me on this one? Thanks in advanced!


-Elizabeth K.

View 4 Replies View Related

Test Restore Databases

May 19, 2003

Hi all:-

I administer about 100 databases. I back them up to a file on the server hard drive everynight. Once a month I would like to test restore the backups . Due to the huge number of databases now its almost impossible to manually test restore them one by one so I came up with an automated script to do it. I have a database called testrestore and I restore each backup file to it get the count on certain crucial tables, throw it in a different table for later comparison and replace the database with the next backup file. I need to run this script on production, do you think its okay to test restore 100 databases one after the other using the 'replace' parameter ? Can it cause any memeory issues ? Is there any other way to test restore such a huge number of databases ? Suggestions are welcome.

Thanks.

View 2 Replies View Related

Restore Of Databases - URGENT

Sep 4, 2001

Hi all - I may be showing my ignorance here but I am in desparate need for some help on restoring my databases. Is there a way to restore/import/recreate a database directly from the .mdf/.ldf files. What has happened it that my hard drive containing my SQL data crashed and cannot be recovered. The only backup that I have of my SQL data is a direct copy of my entire DATA directory from the now ruined SQL install. I need to be able to restore those .mdf and .ldf files into a new instance of SQL. Is there a way to do this. Any help would be greatly appreciated.

Thanks,
Steve Mueller

View 6 Replies View Related

Help Me Restore Lost Databases! :(

Nov 6, 2007

Ok guys, I do a regular daily ntbackup of my entire server. I thought I had sql backups going daily but I think a admin password change stopped that and well those backups are a LONG time ago. The ntbackup is just 1 lost half day.

Windows crashed and had to be reinstalled, so I have all the files in the database folder and what I've done so far was reinstall windows, sql, and all that stuff so now windows is back up and going. I used sql admin and created the database ncdsm. Then I took the folder from the backup of the database for ncdsm and copied it to the new sql install (after stopping the service) and then turned it back on, and it shows that the tables do not exist, but it shows the list of tables in red.


How can I fix this and get all my databases back to normal? Thanks.

View 8 Replies View Related

Restore All System Databases

Feb 8, 2007

Hi All,

I need to do a restore of all my system databases, master, msdb and model, and of course my production database.

The Windows 2003 OS and Sql Server 2005 have both been reinstalled on the server.

I understand I need to be in Single User Mode to restore the master database and I just wanted to clarify the procedure for a successful restore.

I've found this page: http://msdn2.microsoft.com/en-us/library/ms190679.aspx which has instructions for restoring a master database.

So, all I have to do is:

1. Be in single user mode

2. Using SQLCMD run:
C:> sqlcmd
1> RESTORE DATABASE master FROM DISK = 'Z:MyBackLocationmaster.bak';
2> GO

From the instructions:
"After master is restored, the instance of SQL Server shuts down and terminates the sqlcmd process"

My Questions:
When I've restored the master do I repeat the steps above to restore the msdb and model databases? 

Are there any other pitfalls?

Thanks for any advice

Melt

View 1 Replies View Related

Urgent - Unable To Restore/attach A MDF File

Jul 7, 2004

Hi,

I was having problems on myt PC so i did a fresh installation. However I had backed up my SQL database (I only have the MDF file and not the log file).

I have tried restoring and attaching options but nothing works :(

I also get the error saying

"Can not open backup device.... Device error or device off-line. See the SQL server error log for more details. RESTORE database is terminating abnormally".

Please this is urgent. WIll be VERY grateful for your urgent reply.

View 7 Replies View Related

Urgent - Unable To Restore/attach A MDF File

Jul 7, 2004

Hi,

I was having problems on myt PC so i did a fresh installation. However I had backed up my SQL database (I only have the MDF file and not the log file).

I have tried restoring and attaching options but nothing works :(

I also get the error saying

"Can not open backup device.... Device error or device off-line. See the SQL server error log for more details. RESTORE database is terminating abnormally".

Please this is really urgent. Will be VERY grateful for your urgent reply.

View 13 Replies View Related

Unable To Connect To Server After Master DB Restore

Oct 25, 2014

I have restored the master db in single user mode.

---
Processed 440 pages for database 'master', file 'master' on file 1.
Processed 3 pages for database 'master', file 'mastlog' on file 1.
The master database has been successfully restored. Shutting down SQL Server.
SQL Server is terminating this process.
---

I removed single user mode parameter(-m;)

When I start SQL Server in configuration manager getting below error

---
The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details
--

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved