Unable To Run SSIS Package Using Stored Proc
Apr 16, 2007
Hi all,
I have created an SSIS package with protection level - EncryptSensitiveWithUserKey. It is running alright from Visual Studio Environment but i need to call the package from an application, so i created a stored proc to call it, but getting the following error while running the stored proc:
Error: 2007-04-16 17:55:05.78
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that
the correct key is available.
End Error
any solution?
View 1 Replies
ADVERTISEMENT
Jun 11, 2015
We are executing a SSIS package using a xp_cmdshell command in a SP as shown below. This package does consumes time to execute almost 90 minutes and does get executed successfully too. But the strange thing is we don't get the result in @result variable just because somehow the next sql statement after the below highlighted statement doesn't get executed at all. After checking execution stats for the SP using the query attached below we observed that somehow the SP vanishes out of the execution stats for the server.
SELECT @cmd = 'dtexec /FILE "D:Program FilesMicrosoft SQL Server100DTSPackages.....PopulateReport.dtsx"'
SELECT @cmd = @cmd + ' /Decrypt T@!0er '
SELECT @cmd = @cmd + ' /set package.variables[vAppID].Value;' + CONVERT(VARCHAR(10),@appId)
SELECT @cmd = @cmd + ' /set package.variables[vDBName].Value;' + '"' + @db + '"'
SELECT @cmd = @cmd + ' /set package.variables[vBuildMFF].Value;' + CONVERT(VARCHAR(10),@BuildMFF)
[code]....
View 6 Replies
View Related
Apr 12, 2008
HI,
My Stored Proc is Replicated to other DB Server, When iam trying to ALTER my modified SP in Publisher DB, ALTER statement not working, even it's not throwing any errors also.
My SP has very simple logic [Just for get data from DB] , no of lines 680, no of chars 32000 [Approx].
If i decrease the length of SP, it's working fine.
Can anybody help on this?
Thanks in advance..
View 2 Replies
View Related
Jan 26, 2005
Good day all! :cool:
I have a DTS package that consists of 2 tasks, one empties a table(1) to receive data from a transformation task(2)...
I found 'code' for a stored procedure to run a DTS package.. problem is that it is only running the first task... I need it to run the whole she-bang!
Anyone know how to do this?
Here is the stored proc:
/************************************************** **************************************/
/* Filename: spExecutePKG.sql*/
/* Description:Execute DTS Packages via sp_OAxxxx*/
/* Created:Darren Green 200006013*/
/************************************************** **************************************/
if exists (select * from sysobjects where id = object_id(N'[dbo].[spExecutePKG]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[spExecutePKG]
GO
CREATE PROC spExecutePKG
@Server varchar(255),
@PkgName varchar(255), -- Package Name (Defaults to most recent version)
@ServerPWD varchar(255) = Null,-- Server Password if using SQL Security to load Package (UID is SUSER_NAME())
@IntSecurity bit = 0,-- 0 = SQL Server Security, 1 = Integrated Security
@PkgPWD varchar(255) = ''-- Package Password
AS
SET NOCOUNT ON
/*
Return Values
- 0 Successfull execution of Package
- 1 OLE Error
- 9 Failure of Package
*/
DECLARE @hr int, @ret int, @oPKG int, @Cmd varchar(1000)
-- Create a Pkg Object
EXEC @hr = sp_OACreate 'DTS.Package', @oPKG OUTPUT
IF @hr <> 0
BEGIN
PRINT '*** Create Package object failed'
EXEC sp_displayoaerrorinfo @oPKG, @hr
RETURN 1
END
-- Evaluate Security and Build LoadFromSQLServer Statement
IF @IntSecurity = 0
SET @Cmd = 'LoadFromSQLServer("' + @Server +'", "' + SUSER_SNAME() + '", "' + @ServerPWD + '", 0, "' + @PkgPWD + '", , , "' + @PkgName + '")'
ELSE
SET @Cmd = 'LoadFromSQLServer("' + @Server +'", "", "", 256, "' + @PkgPWD + '", , , "' + @PkgName + '")'
EXEC @hr = sp_OAMethod @oPKG, @Cmd, NULL
IF @hr <> 0
BEGIN
PRINT '*** LoadFromSQLServer failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
-- Execute Pkg
EXEC @hr = sp_OAMethod @oPKG, 'Execute'
IF @hr <> 0
BEGIN
PRINT '*** Execute failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
-- Check Pkg Errors
EXEC @ret=spDisplayPkgErrors @oPKG
-- Unitialize the Pkg
EXEC @hr = sp_OAMethod @oPKG, 'UnInitialize'
IF @hr <> 0
BEGIN
PRINT '*** UnInitialize failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
-- Clean Up
EXEC @hr = sp_OADestroy @oPKG
IF @hr <> 0
BEGIN
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
RETURN @ret
GO
View 3 Replies
View Related
Jan 19, 2004
how can a go about running a stored proc when my dts package is finished running?
View 2 Replies
View Related
Aug 16, 2000
Do you know, if there are any ways to start DTS package from the stored procedure?
Thank you,
Anastasia
View 2 Replies
View Related
Oct 1, 2005
My current task in my company is...
I got a Spreadsheet from which i have to get the data into a "Staging Table" and from there the data has to go into 10 different Tables in my database..
I had created a DTS package using ActiveX script and written a Stored Proc to get the records from Staging table to Database tables...every thing is working fine... but...
they asked me to send "TapeType' and "DealName" into two fields and "current datetime" into one more field of the stagingtable fields which are not present inthe Spreadsheet....
so in the Activex script i hard coded... destination"TapeType"= "BidTape" and destination"DealName"= "ABCD" and its working...
and for currentdate i had defined a DTS Task and in that i had written a SQL stmts..
update table....
set currentdate = getdate()
where TapeType = 'BidTape' ..... which is also working....but the problem is
if i got one more spread sheet with same "TapeType" i.e. BidTape but with different "DealName" i.e. "XYZ".... every thing is working out but....the Currentdate field is getting updated every where with as one date..???
can u suggest me a better solution here.....
and after this Iam planning to create one more Task to Execute the Proc..... but I have to pass 2parameters i.e. "Dealname" and "TapeType"... they want every thing to be get done with single mouse click...
can u suggest me here how to pass these 2parameters in the DTS package,..
I will be waiting for any one your valuable suggestions....
View 3 Replies
View Related
Jul 20, 2005
I'm a rookie with MSSQL. I need to run a DTS package to export a result setto an MX Excel spread sheet. I need to call the DTS from a stored procedureand pass it three values, depending on the input parameters to the storedproc.DTS package is no problem. Pretty easy with the DTS wizard. My problem isthat I can't figure out how to instansiate the DTS package object from astored proc and pass the three values as parameters to the DTS package sothey can populate the parameters I created in it.I found an article related to it, but I'm too much of a rookie to grasp it.It showed how to do this from a stored procedure:EXEC @hr = sp_OASetProperty @oPKG, 'GlobalVariables("MyGVName").Value,'MyGVValue'IF @hr <> 0BEGINPRINT '*** GlobalVariable Assignment Failed'EXEC sp_displayoaerrorinfo @oPKG, @hrENDI have three values and tree global variables to populate. Do I need to dothe above 3 times?How do I instantiate the package object? I've read up some on sp_OACreate,but I don't get it, yet.How do I initiate the variable @oPKG?It contains the name of the sp_OACreate string, right? How do I address aDTS package in the sp_OACreate string?I would really appreciate just writing out the sp_OACreate string and how Ipass values for three existing global variables to a DTS package named"DTS_1".I'm under some real pressure to get this done.Thanks for any help I can get.Gunny
View 1 Replies
View Related
Jul 7, 2006
is there a way to execute SSIS Package through stored proceedure.
Or any other method of executing the SSIS Package command line in stored proceedure
Thanks,
jas
View 10 Replies
View Related
Aug 27, 2007
I (actually my DBA did it) have created an SSIS package in MS SQL Server 2005. It can be found under Integration Services under:
Stored Packages
MSDB
VisBridges
ExportTime
Using the Execute Package Utility, it runs perfectly.
I used the article at http://msdn2.microsoft.com/en-us/library/ms403355.aspx to build an application to run it.
My code includes the following (written in VB.Net):
a Web Service Function called LaunchPackage:
Public Function LaunchPackage(ByVal sourceType As String, _
ByVal sourceLocation As String, _
ByVal packageName As String) As Integer ' DTSExecResult
Dim packagePath As String
Dim myPackage As New Package()
Dim integrationServices As New Application
' combine path and file name
packagePath = Path.Combine(sourceLocation, packageName)
Select Case sourceType
Case "file"
' package is stored as a file.
' add extension if not present.
If String.IsNullOrEmpty(Path.GetExtension(packageName)) Then
packagePath = String.Concat(packagePath, ".dtsx")
End If
If File.Exists(packagePath) Then
myPackage = integrationServices.LoadPackage(packagePath, Nothing)
Else
Throw New ApplicationException("Invalid file location: " & packagePath)
End If
Case "sql"
' Package stored in MSDB.
' Combine logical path and package name.
If integrationServices.ExistsOnSqlServer(packagePath, <servername>, <UserID>, <password>) Then
myPackage = integrationServices.LoadFromSqlServer(packageName, <servername>, <UserID>, <password>, Nothing)
Else
Throw New ApplicationException("Invalid package name or location: " & packagePath)
End If
Case "dts"
' package is managed by SSIS Package Store.
' Default logical paths are File System and MSDB.
If integrationServices.FolderExistsOnDtsServer(packagePath, <servername>) Then
myPackage = integrationServices.LoadFromDtsServer(packagePath, <servername>, Nothing)
Else
Throw New ApplicationException("Invalid package name or location: " & packagePath)
End If
Case Else
Throw New ApplicationException("Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'.")
End Select
Return myPackage.Execute()
End Function
My TestPage includes the following:
Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
Dim launchPackageService As New LaunchSSISPackageService
Dim packageResult As Integer
Dim sourceType As String = "dts"
'Dim sourceLocation As String = "M:mssqlssiconfig" ' for "file"
'Dim sourceLocation As String = "MSDBVisBridges" ' for "sql"
Dim sourceLocation As String = "VisBridges" ' for "sql & dts"
'Dim sourceLocation As String = "MSDB"
If rdoCreateTimeTrans.Checked Then
Try
packageResult = launchPackageService.LaunchPackage(sourceType, sourceLocation, "ExportTime")
Catch ex As Exception
Response.Write("The following exception occurred: " & ex.Message)
End Try
End If
End Sub
I've tried both "sql" and "dts" with all the various permutations that are listed (and commented out) above. I either get an error that says:
The top level folder "VisBridges" is not found. ("dts" "VisBridges") -- or --
Invalid package name or location: MSDBVisBridgesExportTime ("dts" "MSDBVisBridges") -- or --
Cannot find folder "MSDBVisBridgesExportTime" ("sql" "MSDBVisBridges") -- or --
The specified package could not be loaded from the SQL Server database ("sql" "VisBridges")
Any assistance would be greatly appreciated.
Many thanks,
Michell
View 6 Replies
View Related
Aug 1, 2006
Hi,
I've created a new SSIS package and am trying to run it as a sqlagent job. If I 'Run as' the 'SQLSERVER AGENT' account I get 'Executed as user: domainadministrator. The package execution failed. The step failed'. If I change this to 'Run as' 'sql agent service account' I get the following message 'Executed as user: [[servername]SYSTEM. The package execution failed'. The step failed.
I can successfully run the package in visual studio, management studio and via the command prompt.
Presumably it is a permissions problem?? I've tried setting up the logging but nothing was written to the log when I run the job, there is otherwise(via Visual studio). I've also tried the following http://support.microsoft.com/kb/918760, but it made no difference.
Anybody else experienced anything similar?
Thanks,
Paul
View 3 Replies
View Related
Aug 6, 2007
My Package Exist in
C:WROXWROXinexcel_database package exist
OR sql server agent ->job-> excel_database package exist
now i want to excute the from master database how please send the
stored procedure code
Regards
koti
View 1 Replies
View Related
Mar 15, 2006
I have developed a SSIS dts package, its running fine from my computer, but the problem is when I am deploying it on actual server then giving me error for connection
scenario,
development env: dev006
three servers: srv01 (64bit), srv02 (32bit), srv03 (32bit)
in development environment, same package is getting data from srv01 and pushing it to srv02 and srv03, but when i am deploying it on srv01 then it fails to establish connection with srv01. If I have a Business Intelligence Studio on 64bit then I will check it but that Studio is available for 64bit environments.
View 1 Replies
View Related
Mar 24, 2008
I am receiving the following error when attempting to create a new package in SSIS 2005. I have completeley re-installed, and even had our support folks re-image my pc, but no luck. Works fine on my laptop, and others are not having any issues.
Microsoft Visual Studio is unable to load this document:
Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
Any help would be greatly appreciated. Thanks, Bryan
View 6 Replies
View Related
Oct 24, 2007
Hi,
I have a package that I need to loop (possibly multiple times) based on a return value from a stored procedure.
I know that in DTS you could use the return value of "execution status" to do this.
Is there a way in SSIS to loop based on a return value?
Thanks much
View 5 Replies
View Related
Jul 17, 2006
We are trying to import data from a .csv file which sits on shared location. This package runs fine when we run it from designer. but we are having problem when we do it at run time (accessing it through a service). Same package runs fine if that file is on same server.
Is any one gone through this issue before? i appreciate any help in resolving this issue.
--------Log----
#Fields: event,computer,operator,source,sourceid,executionid,starttime,endtime,datacode,databytes,message
OnPreValidate,SMSPAD1125M,RFCGKommar1,GIRI_ETL_XREF,{4D456D56-B35F-4FCC-8A89-2D03AC545C76},{5395DAA0-DB96-49CA-BDE7-0DA5C623A2B0},7/17/2006 10:46:42 AM,7/17/2006 10:46:42 AM,0,0x,(null)
OnError,SMSPAD1125M,RFCGKommar1,GIRI_ETL_XREF,{4D456D56-B35F-4FCC-8A89-2D03AC545C76},{5395DAA0-DB96-49CA-BDE7-0DA5C623A2B0},7/17/2006 10:46:42 AM,7/17/2006 10:46:42 AM,-1073659875,0x,Connection "FlatFile" failed validation.
---------------------------------
Thanks,
-G
View 3 Replies
View Related
Jan 22, 2008
Have a situation where I need to check 100+ columns in the dataflow against lookup values to make sure all values are valid, and wanted to take a poll. Would it be better to
1) load the data into a working table and use traditional stored procedure (either NOT IN or LEFT OUTER JOIN where x is null) in order to weed out my bad values against my lookup table.....example
SELECT a.Col1
b.Col2
FROM Table1 a
LEFT OUTER JOIN Table2 b
ON (a.JoinCol = b.JoinCol)
WHERE b.JoinCol IS NULL
This results in poor performance b/c my temp work table is not really optimized for joins over to the lookup tables & I have so many columns that I don't really want to add all these indexes - my thoughts were that the index builds would take longer than the table scans.
OR
2) Use a huge number of lookup transforms in my data flow and keep it all in SSIS.
#1 is easier to maintain (my opinion) for future purposes but slower b/c I don't want to deal with indexes on the work table b/c it will be highly volatile. So - less cumbersome but slower
#2 will be more difficult to maintain b/c of the sheer # of lookups (since I can't change the SQL statement @ run time I have to put them all in separate lookups). Probably will run faster though b/c I won't have to deal with the transfer of the data to the db and also will avoid the table scans from #1. So - more cumbersome but faster.
What do others think? Or is there a better way?
View 4 Replies
View Related
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Apr 7, 2015
A project I'm working on consists of a Main stored procedure which then runs about 30 nested procedures. The client wants to know when a certain nested SP fails, but wihtout rollbacks, as they may want to fix a data item manually (such as a missing Patient ID, that they have to call someone about). At this point, we don't want to roll back anything but halt the rest of the nested SP's and send out an email to someone that they have to check out a missing PatientID.
I'm wondering if an SSIS package would handle this better than just using a Stored Procedure. When that SP runs, it will also update a "Process tracking" table in the backend, that would update [Lastprocessran] with a number. I'm thinking that if they run the main SP again, after making a manual correction, that they could re-run the main SP, and it would bypass any step that already ran successfully based upon the [Lastprocessrun] number.
View 2 Replies
View Related
Aug 25, 2015
I have a Stored proc which on execution, will generate data in the view .
My requirement is using SSIS, how can I create a Flat file pointing to this view ?
View 2 Replies
View Related
Sep 28, 2007
Hi Friends,
In MS SQL SERVER 2005 we created one new SSIS package.
Where it will be stored in MS SQL SERVER 2005.
Default location SSIS package storage in MS SQL SERVER 2005
Ths & Regaurds
shiv
Meti BEST OF THE BEST
View 3 Replies
View Related
Feb 20, 2008
Hi, I am new to SQL 2005 and to SSIS Packages so please forgive the silly question.
I just right-clicked on my database and chose ALLTASKSImport Data.
I selected my flat file and went through the rest of the wizard.
I saved the package when prompted so I can run it later with SQL server Agent.
But now I can't find where the Package is so that I can run it.
In SQL2k I could just look under the DTS folder and find my package.
thanks
ICW
View 4 Replies
View Related
Jul 20, 2006
I have used Import-Export wizard to import some data from a flat file into a db table. When prompted, I have chosen to store the package in SQL Server. The package is executing correctly, scheduled to run (job) once a day...the problem is that I can not see this package in EM and I do not know how to open it in BIDS (since i can not point to a certain file). I can see the package in msdb sysdtspackages90 table, but nowhere else in EM - under management->Maintenance Plans I can see the packages created for db maintenance, but not the one created using import-export wizard. I can se the GUID in the job (command line tab) but the search for the GUID # does not yield any results. The searc for .dtsx does not show this package either. Where is it? If I wanted to open and edit this package with BIDS, how would I do that?
Thanks in advance!
View 13 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Jun 8, 2006
Dear fellows,
I'm looking for at sysdtspackages90 or another tables I am not be able to see it.
Let me know
TIA
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Feb 22, 2007
Hello friends!
I have one query regarding execution of SSIS package through Stored Procedure.
I have created SSIS package which extract data from database and put that into various text files.Here I am using two global variables one is for Department ID and another is path where I wanna to place my text files as per departments.When I ran it through command prompt it works fine but now I want that dtsx package to run from stored procedure with same input parameters
when i searched on line i got this solution
Declare @FilePath varchar(2000)
Declare @Filename varchar(1000)
Declare @cmd varchar(2000)
set @FilePath = 'C:setupSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract Datain'
set @Filename = 'DataExtract.dtsx'
select @cmd = 'DTExec /F "' + @FilePath + @Filename + '"'
print @cmd
exec master..xp_cmdshell @cmd
but when i execute it i got error like
Source: {8A27E8DF-051B-4F6B-9538-85BED1F161D8}
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2007-02-22 11:31:37.32
Code: 0xC0011002
Source: {8A27E8DF-051B-4F6B-9538-85BED1F161D8}
Description: Failed to open package file "C:setupSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract DatainDataExtract.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loadin
g a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
End Error
Could not load package "C:setupSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract DatainDataExtract.dtsx" because of error 0xC0011002.
Description: Failed to open package file "C:setupSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract DatainDataExtract.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a
package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
And also I am not understand where i should pass my two input parameters which I used in SSIS package variables???????
Please help me out
Thanks
View 20 Replies
View Related
Mar 28, 2008
I'm trying to create a stored procedure which will run 2 SSIS packages before it runs some other SQL code. I read [url=http://msdn2.microsoft.com/en-us/library/ms162810.aspx]this[/url] article. I'm trying to use the package from the file system.
Here is the my code:
CREATE PROCEDURE usp_participant_limits_report
AS
dtexec /f "C:....Activity_Limits.dtsx"
GO
The error message says it doesn't like the "/". Anyone?
View 1 Replies
View Related
May 24, 2006
In SQL Server 2005 I need a stored procedure that will execute an SSIS Package for me. There is some earlier stuff on the board but I don't understand it. I don't want to create a Job to do it if I don't have to.
Thanks,
George Cooper
View 3 Replies
View Related
Mar 8, 2006
Hey guys,
I've got a problem here. I need to send the query result to a csv file then transfer the file to a website. I thought this is a good candidate for a SSIS package. The package is ready now but I don't know how can I execute it from within a stored procedure.
I thought sp_OA family of extended procedure would be helpfull. After following steps:
EXEC @hr1 = sp_OACreate 'DTS.Package', @oPKG OUT
EXEC @hr1 = sp_OAMethod @oPKG, 'LoadFromSQLServer("foo", ,, 256, , , , "foo1")', NULL
EXEC @hr1 = sp_OAMethod @oPKG, 'exec'
EXEC @hr1 = sp_OADestroy @oPKG
it tells me command execute successfully. But no package actually gets executed and I can see no results
Thanks
View 1 Replies
View Related
May 21, 2008
hi,
I need to convert a stored procedure in to a SSIS package, do any body have an idea on this. thanks in advance
View 1 Replies
View Related
Jul 22, 2005
how to excute ssis package from stored procedure and get the parameters back from ssis into the stored procedure.
View 23 Replies
View Related
