Unable To Run Command Prompt SQL Utility From SQL Agent
Mar 20, 2003
I am unable to execute DTS packages,ISQLs when scheduled from SQL Server Agent . It dispalys a Dr.Watson Access Voilation message on the box .The result of the job is "failed as the step did not return any result ".
1)The utilities run fine when run from clients from other computers .
2)They fail again when run thru the command prompt of the box .
3)They suceed when run via the xp_cmdshell .
Can anybody help me out ?
Thanks,
Venkat
View 7 Replies
ADVERTISEMENT
Dec 7, 2000
Can anyone tell me how to enable bcp utility. Because anytime I try to run BCP I get the following error messages: (BCP not enable). Also how can I get to SQL Server command prompt? I look forward to hearing from anyone.
View 2 Replies
View Related
Jun 4, 2007
I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).
I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?
"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509
(reason: The system cannot find the file specified). The step failed.
The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."
View 1 Replies
View Related
Jun 4, 2007
I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).
I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?
"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509
(reason: The system cannot find the file specified). The step failed.
The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."
View 3 Replies
View Related
Sep 20, 2007
A strange thing is happening to us: we create a bat file that executes an SSIS package with multiple connection managers and tasks.
When calling the bat file from command prompt €“ the package runs just fine!
When calling the same bat file from SQL Server Agent (that runs under the same NT account as SSIS, and all other SQL services, and belongs to local Adminstrators), the package fails half way through with connection failed issue.
Plus it gives us something like this: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
Has anyone ever experienced this issue, do you have any possible solutions?
Thank you!
Anastasia
View 4 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Oct 17, 2000
Sorry for the new thread.
How to run a DTS job from command prompt? Any help is appreciated!
Thanks.
View 1 Replies
View Related
Feb 23, 2006
I have a Microsoft SQL server that is setup, and inside it is a job. Inside the job is a bunch of lines of transact sql statements.
I would like to be able to start the job from the command prompt. Moreover, I do not want to have to create new files or modify anything that is existing. I just want to be able to have it set up so that a new user who installs the server and all of the job on their machine fresh, can just punch in the command to run the job.
I know I can copy the transact sql statements from the job, and run them through the command prompt, but that would be a poor way to do it, because if the statements in the job were ever modified, with this task being automated, the command prompt statements would be out of date.
So I just need a way to start the existing job from the command prompt. Is this possible? Maybe with OSQL?
View 4 Replies
View Related
Jun 18, 2008
Please let me know how to install sql server by using command prompt.
View 4 Replies
View Related
Mar 26, 2008
I am have trouble configuring developer edition when trying to run a Bulk Copy through Command Prompt. I have configured remote connections within the surface area configuration and have created a firewall exception
I enter and run
bcp FileImportDB..Exam in "c:FileImportPracticeExamImportFile.txt" -T -c
then i get the following error message
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersDineen>bcp FileImportDB.Exam in "c:FileImportPracticeExamImportFile.t
xt" -T -c
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
SQLState = HYT00, NativeError = 0
Error = [Microsoft][SQL Native Client]Login timeout expired
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this failure may
be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am running developer edition on vista and Service pack 2, iam connecting to my instance with no problem.
Can someone please help
Kind regards
Rob
View 6 Replies
View Related
Jul 25, 2006
I have a requirment, when a user logs in to the pc, I want to run some SQL scripts which is been saved as a stored procedure on another pc. Could this be possible. I know in oracle you could do it using SQLLDR. Is there any way to do it in SQL?
Please advice. Any help is greatly appreciated.
View 3 Replies
View Related
Sep 13, 2000
Is there a way by which we can execute the backing up of database from the command prompt......
Suppose i need to do the below task. I can write a stored procedure and schedule it. But the situation demands to run from the command prompt. Is there a way out.
-- Create the backup device for the full MyNwind backup.
USE master
EXEC sp_addumpdevice 'disk', 'MyNwind_2', 'c:mssql7ackupMyNwind_2.dat'
-- Back up the full MyNwind database.
BACKUP DATABASE MyNwind TO MyNwind_2
-Rajesh
View 2 Replies
View Related
Jan 23, 2001
I have created linked servers and successfully run the following stored procedure.
exec [db-2001server].sales..sp_test
Can anyone give me the exact syntax for running the same from command promt(without using the query analyzer).I am new to isql/osql.So,please help me with the syntax.
Thanks!!
View 1 Replies
View Related
Jan 7, 2001
How to import database in command prompt?
View 1 Replies
View Related
Oct 11, 1999
We have a development server that will only run SQL Server from a DOS command prompt. Each time I reboot the server the services don't autostart, and I am unable to start them manually using Service Manager. Does anyone know what I can do to fix this problem?
Thanks
View 1 Replies
View Related
Feb 13, 2004
Hi,
I try to backup DB (DatabaseA) in ServerA using sqlmaint utility in command prompt.
The sqlmaint.exe does reside in ..MssqlBinn Folder.
Below is the command i used (MS-DOS):
..Binn>sqlmaint -S ServerA -U "sa" -P "########" -D DatabaseA
-BkUpDB C:Temp -HtmlRpt BackupRpt.html
When I execute the command, it only shows a list of the commands as if I execute -? command. There's NO any other messages that indicate the backup command is being executed.
When I check in the C:Temp folder, there's no BackupRpt.html file.
Anyone got any idea?
Thanks.
View 5 Replies
View Related
Jun 25, 2014
How can i get the output (like 1 rows(s) inserted)in a file from an input file through sql command prompt.
View 1 Replies
View Related
Nov 15, 2007
Hi,
I wanted to know if there is a way to execute sql commands on the operating system's command line. If it is possible, then how do we do it ? For example to execute a SELECT * from Table statement what are we supposed to do ?
Thanks
S
View 2 Replies
View Related
Aug 8, 2007
i have a problem installing SQLEXPRESS via command prompt... the installation is successful but the 'sa' account could not login to the server.. here's the command in my batch file.
Code SnippetStart /wait <exe> /qb INSTANCENAME=MYINSTANCE ADDLOCAL=ALL *AUTOSTART=1 RSCONFIGURATION=DEFAULT SECURITYMODE=SQL SAPWD=sapwd SQLCOLLATION=Latin1_General_BIN requiresmsiengine=1
and one more thing, i need to run the report server automatically.. thanks!
View 2 Replies
View Related
Aug 14, 2005
Hi,I am trying to install MSDE from a CD. At the beginning I cunpack all files at C:sql2ksp3. Then in in Command promptI enter C:sql2ksp3MSDE> Setup SAPWD=Hello SecurityMode=SQL The problem is that nothing happens after that. When I press enter another line appears C:sql2ksp3MSDE>but that's about it.The installation does not continue. Does anybody know how to "push" it a bit so it will continue?Thanks
View 1 Replies
View Related
Feb 24, 2008
All, I am developing the data mart refresh task in SSIS. I wanted to call the package in command prompt. I need help. Can any one give any tips on it. Thanks and appricate in advance.
Regards
Govind
View 2 Replies
View Related
Dec 17, 2007
Hi,
We have requirement where we need to run the SSRS report from Command Prompt. We are using Control + M, which is a scheduler runs only from DOS prompt.
Can anyone help us to know the procedure of doing this.
Thanks
Karthik
View 1 Replies
View Related
Mar 21, 2007
Hi,
I need to install a customed SQL server express instance on the client's computer by using the Command prompt installation. I've already defined the security settings and everything i need but i was wondering if is possible to attach a mdf database during the installation. Perhaps there is a paramenter i can include in the in the ini file.
Thank you
View 6 Replies
View Related
Jun 30, 2006
How can I login to SQL Server Express instance(localhostSqlExpress) using command prompt so that I can query database. Is there any alternative GUI tool for SQL Server Express Manager? (I think Microsoft has discontinued SQL Server Express Manager). I prefer using Command Prompt. I am using WindowsXP Professional.
View 8 Replies
View Related
Apr 24, 2007
Iam trying to connect to local copy of sql sever express from the command prompt with this command(sqlcmd) but i get the error below. What should i do to overcome the error. Basically what i want to do is to try out some commandline backup utilities and i deadly want to know how to do a backup from the command prompt. Help is greatly appreciated.
HResult 0x2, level 16, state 1
Named pipes provider: could not open a connection to sql sever [2]
sqlcmd: Error: Microsft sql native client: An error has occurred while estarblishing a connection to the sever. When connecting to sql sever 2005, this failure may be caused by the fact that under the default settings SQL sever does not allow remote connections..
Sqlcmd: Error: Microsoft sql native client: Login time out expired.
View 3 Replies
View Related
Dec 23, 2005
I have created ssis package. It has been successfully running at UI level.
But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Script Component" (9).
End Error
i have entered the command as follows.
dtexec /f "c:somefolderpackage1.dtsx"
Any points regarding this issue would be helpful.
View 7 Replies
View Related
Dec 5, 2007
Hello,
I was wondering if there was any way to set the service account on sql server 2005 express to Local System via command prompt.
To giva some background to this issue, I am installing 2005 express via command prompt, however, the default service account is network I believe. However, when running this, I keep getting an "error 3415" whenever I try to attach a database, which states that the files are "read only", which they are not. However, when setting the service account to local or set the security mode to windows authenticaiton, I can attach just fine.
The parameters I use to install are pretty standard:
"/qb ADDLOCAL=ALL INSTANCENAME=<name>SAPWD=<pwrd> SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SQLAUTOSTART=1"
So I was wondering if there was some way to set the service account to local system to local using some command prompt parameter. OR if there was another way around the error 3415 that will enable me to attach a database, that I do not know about that I can use, preferrably via command prompt, but anything will be fine at this point.
Thank you all in advance.
View 6 Replies
View Related
Sep 26, 2006
I want to install the SQL Server Express Edition silently at command prompt (but want the dialog boxes, I mean with /qb option), locally, with no network options.
I want to install it with following options
i) In the Feature Selection, I need
a) Data file (Database Services)
b) Shared tools (Database Services)
c) Connectivity Components (Client Components)
d) Management Studio Express (Client Components)
ii) Instance name as €œDefault Instance€?
iii) Service Account as €œUse Built-in service accountà Local System€?
iv) Authentication Mode as €œMix mode€? with sa password as €˜sysadm€™
v) Collate Settings as €œLatin1_General_CS_AI
How could I achieve this using command prompt?
I already had done
start /wait setup.exe /qb ADDLOCAL=ALL SECURITYMODE=SQL SAPWD=sysadm SQLCOLLATION=Latin1_General_CS_AI
any other attribute need to add?
Regards,
Thanks.
Gurpreet S. Gill
View 10 Replies
View Related
Sep 15, 2007
The MSDN Library topic Using the sqlcmd utility(SQL Server Express) states "To access the sqlcmd utility, click Start, click Run, and type sqlcmd.exe."
A command prompt window opens with "SQLCMD" in the title bar. I cannot enter anything in the command prompt window and the window remains open for only about five or six seconds.
The version I have installed is MS SQL Server 2005 Express with SP2. The cumulative updates package 3 does not list this problem, so I did not install it.
View 1 Replies
View Related
Nov 14, 2005
I have downloaded and "run" these programs:
View 6 Replies
View Related
Jun 26, 2007
Hi, I want to run "Intergration Services Deployment Manifest" through the command prompt, passing the values .. which should basically go and install that Package either on File System or SQL Server. Does any one have any idea on how to do that ...
Thanks,
View 3 Replies
View Related
Jul 31, 2007
Hello, I have a question regarding installing SQL Express with Advanced Services from the command prompt. I am executing a .cmd file which has the following syntax:
start /wait setup.exe /qb INSTANCENAME=Tim ADDLOCAL=SQL_Engine,Connectivity,RS_Server,RS_Web_Interface SAPWD=1StrongPassword_2 SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0
Yet, after the installation when I run the Reporting Services configuration tool, none of the settings for Reporting Services are set. I would like to be able to install Reporting Services from the command prompt and have it use the default settings for creating a default website just like you can through the User Interface using the Setup.exe but cannot seem to figure out what I am missing in my .cmd file?
I would appreciate any help anyone can provide.
Tim
View 3 Replies
View Related
Jun 10, 2002
Hi everyone,
I have created a DTS package in SQL Server 2000 which is running good when I execute it through SQL Enterprise manager.
But when I try to run the package through command line DTSRUN utility on server, I am getting the following error message displayed.
"DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005)
Error string: Error opening datafile: There are currently no logon servers available to service the logon request.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
".
The same package is getting executed properly when I run it from my client through DTSRUN from the command prompt.
Any idea if it is because of security issues.
thanx in advance.
Mad
View 4 Replies
View Related
