Unable To Send Database Mail To External User
Jul 13, 2015
I have two domains. forest domain abc which has the exchange infrastructure. forest domain xyz which does not have exchange. There is a two way trust set up.
I have set up database mail which sends internally but not externally on the xyz domain its uses mailrelay address to comunicate with exchange. The receive connector is set up correctly on exchange on domain abc as I have managed to send email from a sql server to external contact in the abc domain.
The IP addresses are correct on the receive connector.
The problem is I am unable to send to an external contact from the sql server in the xyz domain. Not sure if this an exchange issue or database mail.
View 2 Replies
ADVERTISEMENT
Jul 29, 2013
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies
View Related
Sep 1, 2006
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
View 4 Replies
View Related
Nov 28, 2007
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
View 7 Replies
View Related
Oct 5, 2007
Here's the scoop, and I've seen several posts to this effect but none of the solutions have worked.
Enabled database mail. confirmed profiles and can send test database mail from Query Window. I can also right click Database mail and send test emails. Configured valid operator using same email address for the test emails above.
Enabled database mail profile under SQL Agent properties > Alert System.
From what I've seen, the test button is supposed to be greyed out, and it is. However alerts do not send emails operator.
I've done this
http://msdn2.microsoft.com/en-us/library/ms186358(SQL.90).aspx
and this
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=322173&SiteID=1
and have bounced the Agent after each change but still no mail from the Agent.
I've tried select * from sys_mail_event_log no errors.
For the life of me, I can't see why the Agent won't send mail.
Help.
View 5 Replies
View Related
Sep 2, 2007
I want the server to send some auto email according to a column "expiry_date" in some table. How shall I do that? Use trigger?
Is it possible?
View 1 Replies
View Related
Nov 23, 2006
i've got a brand new server and just installed SQL 2005.
when i try to send a test email, i get the following error message:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 5 (2006-11-23T11:49:34). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it). )
I have checked all items from troubleshoot and eveything is ok...any help ?
thanks
View 2 Replies
View Related
Apr 28, 2007
The idea is user upload MHT file, I just send out email to others, with the content in the MHT as the conentent of the email.
thanks
View 3 Replies
View Related
Apr 14, 2015
I have a job under the SQL Server Agent, which is configured to send an email notification on failure.
The job is scheduled to run every 30 minutes.
Is it somehow possible to configure it so that it only sends one email in case of subsequent failures instead of "spamming" my inbox every half hour?
View 4 Replies
View Related
Jun 12, 2014
I have been using database mail for quite a few years now. I started using it with SQL Server 2005 and then it worked fine. Then we went over to SQL 2012 and the problems started. At first I could not get any e-mails out and read a post by Microsoft that a patch needs to come out but not available yet. That was in 2012. Presumably the patch came out with windows updates and my DB Mail started working. Now, however, I have the problem that some e-mails do get sent but the majority failed.
I use this so that whenever a user captures certain data to update a person's status on the database then an automatic e-mail will be sent to that person to inform them of their status at this company.
View 0 Replies
View Related
Aug 20, 2015
I am sending multiple attachments with database mail for that i have created script to generate file names and send it to mail. Below are my script
DECLARE @MailFile VARCHAR(100)
SET @MailFile = 'Detail_Reimbursement_1_15_'
+ LEFT(CONVERT(VARCHAR, Getdate()), 3)
+ Substring(CONVERT(VARCHAR, Getdate(), 100), 8, 4)
+ '.csv'
[Code] ....
The script is working fine if i manually provided file path to @file_attachments. it is showing error i passes the variable @Loc3 to @file_attachments. Below is the error if i passes the variable to @file_attachments parameter.
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
Msg 22051, Level 16, State 1, Line 0
Attachment file 'E:DatabaseTannaFinanceReportDetail_Reimbursement_1_15_Aug2015.csv is invalid.
View 2 Replies
View Related
Jan 19, 2007
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
View 4 Replies
View Related
Aug 12, 2015
I have below table in the snapshot, My task is to send the same output as a attachment in Excel to email. i used the below procedure
EXEC [msdb]..sp_send_dbmail
@profile_name='TSSSendMail',
@recipients='mymailID@gmail.com.com',
@subject='DB Mail',
@body='HI Team',
@execute_query_database = 'DbName',
@query = 'EXEC J16ReimbursementFortnightly1TO15 1',
@attach_query_result_as_file=1,
@query_attachment_filename = 'SummaryReimbursement.xls'
But I am not getting Proper Output, is seems like CSV Format, but i want it proper tabular format in Excel.
View 4 Replies
View Related
Apr 30, 2015
Is there any automated script available to - "Monitor Database Growth and if any DB is grown by 20%, sending mail alerts"? If not, what is the approach to write the T SQL script ?
View 5 Replies
View Related
Oct 19, 2015
I am trying to send out notifications when jobs complete (fail or succeed). I have database mail working fine on my DEV server, but I am having issues with it on my PROD server. I am currently having people look into if McAfee may be blocking it.
I am able to send out a test email from SSMS>Management>Database Mail, but when I set a Notification for a job, the job will complete and in the history, it will say "NOTE: Failed to notify 'User' via email."
I have created an Operator and set up Profiles and Accounts, just as I did on my DEV server.
View 2 Replies
View Related
Aug 18, 2015
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies
View Related
Feb 27, 2007
Hello All,
Hopefully someone out there will have an idea as this isdriving me nuts
I have some sample problem.I want to send many email in one send mail task, how can i do it?
what is a signal for separate between email address in send mail task.
please tell me for this event.
any suggesstion appreciated
Thanks you very much.
P.Chonnathan
View 5 Replies
View Related
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Feb 10, 2008
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
View 3 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Nov 10, 2006
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
View 3 Replies
View Related
Aug 11, 2014
I've been tasked to create a database diagram, save it and send that db diagram to the user. Now, I am confused as I don't know where sql server stores the db diagram...what is the path where it stores the diagram. How do I export it in case if I need to provide it to the user. How, am I supposed to grant user permission so he himself can create a database diagram.
View 9 Replies
View Related
Oct 12, 2006
/* -------------------------------------------------
The Following Procedure Helps You To
Send a Messge to all Users
those Who Access a Specified Database in a Server
*/
Create Proc Sp_SendMsg
@Msg Varchar(100),
@DbName VarChar(100)
as
if db_id(@DbName) = Null
begin
Print 'DataBase dose not Exist'
end
else
Begin
Declare @spId Varchar(1000)
DECLARE TmpCursor CURSOR FOR
Select 'master..xp_CmdShell ''Net Send ' + rtrim(convert(Varchar(50), HostName))+' "Dear ' + upper(max(rtrim(loginame)))+ space(1) + @Msg + '"''' as spId
from master..SysProcesses
where db_Name(dbID) = @DbName and
spId <> @@SpId
and rtrim(ltrim(HostName)) <> ''
and HostName <> host_Name()
and dbID <> 0
and spId > 50
group by HostName
OPEN TmpCursor
FETCH NEXT FROM TmpCursor
INTO @spId
WHILE @@FETCH_STATUS = 0
BEGIN
Exec (@spId)
FETCH NEXT FROM TmpCursor
INTO @spId
END
CLOSE TmpCursor
DEALLOCATE TmpCursor
end
View 2 Replies
View Related
Oct 2, 2002
hello everybody.
I have server server1
sql server and agent and mail profiler
running using mydomainsvcsql
dts (test_dts)created by user domainalex
with "use windows athentication"
dts steps
1. exe sp_who2
2. send mail to joe
user domainjoe run
DTSRun /S server1 /E /N test_dts
with error
Error: -2147220352 (80040480); Provider Error: 0 (0) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed
what permisissions should be granted to
domainjoe
in order to run dts from DTSRun ?
Thank you
View 4 Replies
View Related
Jul 29, 2013
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 3 Replies
View Related
May 27, 2008
hi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
View 2 Replies
View Related
Jul 14, 2015
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
View 6 Replies
View Related
Mar 13, 2008
Hi,
iam using VS2008 for developing an application. From my code iam mentioning a connectionString in which iam using a database named ASAOPS.When iam trying to connect to it with a user named asauser it is throwing an exceptions that "asauser is not with the trusted sql connection" for one time and "login failed for the asauser" for later time.
can anyone help me in solving this problem?
View 1 Replies
View Related
May 7, 2014
We are unable to drop a database user with the following error "Msg 15284, Level 16, State 1, Line 1
The database principal has granted or denied permissions to objects in the database and cannot be dropped."
On checking the database permissions we have the following permissions assigned to the user
classclass_descmajor_idminor_idgrantee_principal_idgrantor_principal_idtypepermission_namestatestate_desc
17SERVICE655360517SN SENDGGRANT
17SERVICE655370517SN SENDGGRANT
17SERVICE655380517SN SENDGGRANT
17SERVICE655390517SN SENDGGRANT
17SERVICE655400517SN SENDGGRANT
[Code] ....
How we can revoke the SEND permissions?
View 3 Replies
View Related
Jul 20, 2007
Hi
I've loaded a C# assembly into my database with External Access (the dll contains a routine
that accesses Environment.MachineName).
I am now unable to invoke any of the entry points in this assembly. I get the error message
'An error occured trying to load assembly Id XYZ. System.IO.FileLoadException.....'
I have set the database Trustworthy flag to ON and the assembly does not have a strong name.
Can anyone tell me what I've done wrong?
Thanks
Steve
P.S. I am calling the assembly from SQL code residing in a different database than the one
the assembly has been loaded into.
View 3 Replies
View Related
Jul 20, 2005
xp_sendmail has died on our SQL Server, I get error "xp_sendmail:failed with mail error 0x80004005" if I try using it.I believe that the reason that this has happened is because the SQLServer service account is unable to send mail, as follows:If I log on to Outlook Web Access as the SQL Server service account(SVC_SqlServer) I am able to receive mail. However, any mail sent fromthis account simply dissapears.It appears in the Sent items folder (in OWA for the SVC_SqlServeraccount) but the recipient (me, in this case) never receives it!Does anyone know why this account is unable to send mail?Help!eddiec :-)
View 1 Replies
View Related
Jan 3, 2007
Hi,
How can I Send Mail with the query result having multiple rows. What type of dataflow destination is correct (recordset, datareader). The Send Mail task is working correctly. But, the message is blank without any result set.
Appreciate your help.
Thanks
View 16 Replies
View Related
