Unable To Set SQL Express Service Status To Running State
Nov 1, 2007
Hi! Im just starting to learn how to use an SQL express database. I used it over at my campus and it worked fine and now when I try running it on my machine it gave me this error :
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connection.(Provider : SQL Network Interfaces, error : 26 - Error locating server/ instance specified.)"
I know that by default SQL express doesnt not support remote connection but when i try to get the service status running, i got another error which is :
"The service did not respond to the start or control request in a timely fashion, you need administrator privileges to be able to start/stop this service. (SQLSAC)"
I am already logged on to the computer as an administrator but i still cant get the service to run! Pls help!
View 1 Replies
ADVERTISEMENT
Nov 13, 2007
I've lost access to SSIS and BIDS.
I'm a SQL 2005 developer DBA with a 1.5 years experience with SQL Server 2005. It has been a while since I needed to use SSIS. I used it with no problems earlier this year when I was managing the team conversion to SQL Server 2005. Now it no longer appears on my START > Programs > SQL Server 2005 menus. I had to reinstall SQL Server 2005 and Visual Studio 2005 months ago and must have lost it then some how.
How do I get access to BIDS and SSIS again?
SQL Server Integrated Services shows up in my Services list as running.
I've already tried Add/Remove Programs to drop that component from SQL Server 2005, reboot, Add it back, reboot. Still does not show up in my menus and the Service is running. The Setup Bootstraplog summary for this effort shows no failures and shows this:
Product : Microsoft SQL Server 2005 Integration Services
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_xxxx-xxxx_DTS.log
My SQL Server level is 9.0.3054. The About Info is:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.832
Operating System 5.1.2600
My Visual Studio About Info is:
Microsoft Visual Studio 2005
Version 8.0.50727.762 (SP.050727-7600)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: Professional
Microsoft Visual Basic 2005 77626-009-0096213-41845
Microsoft Visual Basic 2005
Microsoft Visual C# 2005 77626-009-0096213-41845
Microsoft Visual C# 2005
Microsoft Visual C++ 2005 77626-009-0096213-41845
Microsoft Visual C++ 2005
Microsoft Visual J# 2005 77626-009-0096213-41845
Microsoft Visual J# 2005
Microsoft Visual Web Developer 2005 77626-009-0096213-41845
Microsoft Visual Web Developer 2005
Microsoft Web Application Projects 2005 77626-009-0096213-41845
Microsoft Web Application Projects 2005
Version 8.0.50727.762
Crystal Reports AAC60-G0CSA4B-V7000AY
Crystal Reports for Visual Studio 2005
Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB937061)
Also, in case it is relevant, I've NEVER installed SQL Server Express or had it installed.
When I reinstalled, I installed SQL Server 2005 before VS 2005 since I know that has caused problems with some people.
Please help me get SSIS and BIDS access again.
Thanks,
Paul
View 6 Replies
View Related
Oct 4, 2007
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
SQLServer2005MSSQLServerADHelperUser$SQL1
SQLServer2005MSSQLUser$SQL1$SQLEXPRESS
SQLServer2005MSSQLBrowserUser$SQL1
I receive one alert int he event logs/application
EventID: 26010
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the
SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
View 6 Replies
View Related
Nov 28, 2007
I have log shipping every 15 minutes working between 2 servers, and while the secondary server reports everything ok (time since last copy, restore are all under 15 minutes), the primary server reports that the time since last backup is 7400+ minutes. I have verified that the LS backup job has no failures. How can I correct this false error state and get the primary server to start reporting actual statuses?
The LS monitor is on the secondary server.
View 9 Replies
View Related
Sep 25, 2006
In SQL 2000, go to Management, than Jobs, you will see a list of all jobs and their running status. I would like to programmatically display the same on my web page. I can call sysjobs table to get the jobs and use sysjobschedules to determine whether it's been scheduled or not. Then use sysjobhistory to obtain their running history. But how and where do I get the Next Run Date information? Is this calculated or stored somewhere?Can anyone give me some help on how to work with sysjobs, sysjobschedules, and sysjobhistory tables? All I am trying to do is to build a web-based app that does the same thing as the Enterprise Manager is doing - create and schedule a job, and monitor the job status.Thanks a lot!Penn
View 1 Replies
View Related
Mar 21, 2007
Greeting guys, does anyone here experience the problem that I had currently. I did set up a mirroring for my db for 1 month + and work perfectly. However, due to lack of stability on line connection on the principal database side, so makes mirror side get disconnected frequently. I found that once the principal side get back smooth, the mirroring status shows 'synchronizing' status and I thought it gets fine again.
However, after 2 days (which more than 48 hours) and I check back the status, it still showing 'synchronizing' and synchronize slowly. It's impossible that the mirror side takes more than 2 days for synchonizing. ( Size on principal size is around 1.2GB and mirror side around 800MB) Is there any solution on it ? Is it have to re-set up the mirroring session again? I don't think is line connection issue because I did set up another mirroring session between these two servers and work fine. Hope you guys can help me out asap. Thx.
Best Regards,
Hans
View 3 Replies
View Related
May 30, 2008
Dear Sir,
When we run DBCC CHECKDB, we got [Error 831, Severity 20, State 1 - "Unable to deallocate a kept page"... ]
We just found one about this err http://support.microsoft.com/kb/949199/en-us, but we didn't enabled SNAPSHOT isolation level.
Could someone tell us what can we do next step??
**DB Info.**
1. Version : Microsoft SQL Server 2005 - 9.00.3159.00 (Intel X86) Mar 23 2007 16:15:11 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
2. snapshot_isolation_state : 0
3. snapshot_isolation_state_desc FF
Best Regards,
W2
View 2 Replies
View Related
May 13, 2005
Hello,
I have a very long running stored proc (import and transformation of 2-3 M. records). The duration of about 1h is not the problem.
My problem is that i want to send some notifications to the UI for showing a progress counter in the UI.
Is there any possibility to send send out a msg after certain steps (e.g. after positioning the cursor to next row) via an extended stored procedure which I could catch in my UI?
I would be very appreciative if somebody would send me a hint.
Thank you,
selo
View 4 Replies
View Related
Jul 24, 2003
Hi,
I ahve attached the bmp doc that will show my screen snapshot.
My SQL server Agent service indicator is not showing green as like other server. I have started the serice and running fine. I don't have any problem running the job.
My curious is why that indicator is not showing up.
Thanks,
Ravi
View 5 Replies
View Related
Mar 28, 2002
Hello , I noticed thsi morning I have 4 jobs having job status
"performing completion action"
normaly it takes 20 min 1 hr to finish longest job.
What does it mean?
View 2 Replies
View Related
Sep 25, 2007
I noticed this morning that
I have a job status "performing completion action" for one of mine sql scheduled task job.
The job executes a dts pkg (which I just rum manually, and all worked fine)
What does it mean?, I can not stop this job and refresh is not working ether.
What I can do?
Thank you,
L
View 9 Replies
View Related
Mar 24, 2008
I have a stored procedure in SQL 2005 that purges data, and may take a few minutes to run. I'd like to report back to the client with status messages as the sp executes, using PRINT statements or something similar. I imagine something similar to BACKUP DATABASE, where it reports on percentage complete as the backup is executing.
I can't seem to find any information on how to do this. All posts on this subject state that it's not possible; that PRINT data is returned after the procedure executes. However it would seem possible since BACKUP DATABASE, for example, does this.
Is there any way to send status type messages to the client as the sp is executing??
Thanks.
View 6 Replies
View Related
Aug 28, 2002
I don't know too much about 6.0 so I need your help. I can't get to this database with a 6.5 enterprise manager either. The SQLOLE65.SQL script hasn't been run against the master database.
Well, here's the problem the Service Manager shows the services in a SERVICE STATE INDETERMINATE. No green, yellow red showing. I can't get into the database using enterprise manager because it says it's unavailable. However, on the enterprise manager it shows the database in a green (running state). So I'm uncertain whether to stop and start the database.
Has anyone every ran this SQLOLE65.SQL script so they can manage a 6.0 db thru a 6.5 enterprise manager? If so, please provide step by step instructions or warnings to look out for....
thanks
View 1 Replies
View Related
Nov 22, 2007
hi all,
i have a package; thats executing another 4 packages, i can able to execute these packages in ASP.net
I want to display the status notification of the executing packages in the webpage( while packages are being executed, i want to display which package is executing, and what is the status of the package! whether it is executing or not? or it is raising any errors?) every thing i want to give in the front end--> its not my requirement, my client ask me to do that!
so please help me! how to display these status information of the running package in asp.net (c#)
(i'll give you one good chocolate if you give me good solution!)
post your mails to vivekanandaraj.natarajan@honeywell.com Thanks you a lot!
View 1 Replies
View Related
Sep 21, 2015
I want print state of running query to output, because my query need long time to run.But print statement dos not work correctly!
Note: I cannot use "go" in my query!
/* My query */
print 'Fetch Data From Table1 is Running...'
insert into @T1
select x,y,z
from Table1
print 'Fetch Data From Table1 Done.'
[code]...
View 2 Replies
View Related
May 22, 2015
Let's have a table to show what I mean ...
As you can see I have added only one contract (for the sake of simplicity). At any given date I want to calculate the running total for a contract (all contracts), but the aggregation must take the contract state into consideration.
You can see my expected result for queries 1 - 3. That means, with the actual state ('B') I want to aggregate all values regardless of their state in the past.
For query 2 the state is 'A' ... I hope you can follow.
Now my aim is to aggregate all contract states for any given date with the right value. The past states of each contract are not relevant. And of course future ones (with respect to the query date) shall also be irrelevant.
Maybe the solution is a combination of 'LastNonEmpty' and SUM/PERIODSTODATE ...
View 5 Replies
View Related
Apr 3, 2000
Do we need to stop the services like replication and Cluster before deploying SP2 on Sql server.
View 1 Replies
View Related
Nov 16, 1998
Does anybody know what can cause this:
"? AutoStart - Testing SQLServer service state"
to write to the sqlexec.out file every five minutes? Thank you.
Alan
View 1 Replies
View Related
May 15, 2007
Microsoft recommends that you do not use the Network Service account to run the SQL Server service (see http://msdn2.microsoft.com/en-us/library/ms143504.aspx).
Can anyone tell me what the drawbacks are of doing this?
View 1 Replies
View Related
Sep 21, 2015
I want print state of running query to output, because my query need long time to run. But print statement dos not work correctly!!
Note: I cannot use "go" in my query!
/* My Query */
print 'Fetch Data From Table1 is Running...'
insert into @T1
select x,y,z
from Table1
print 'Fetch Data From Table1 Done.'
[Code] .....
View 1 Replies
View Related
Mar 10, 2004
I have a Win 2003 server running 3 instances of SQL 2000 Enterprise.
The problem is I can only start 2 of the 3 Job Agents at a time, as the 3rd gets stuck in a starting state.
Has anyone struck this problem before?
Thanks.
View 8 Replies
View Related
May 16, 2007
Hello Reporting Services 2005 users or Reporting Services Team,
I have done everything to get pass this error but no luck.
My setup is :- WIndows 2003 Standared Edition SP1
Sql Server :-
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Reporting Services starting SKU: Standard.
From the Reporting Services Configuration Manager:
I can see all other things configured except Encryption Keys(blue sign)
Initialization(Grey sign) and Execution Acct(Yellow sign)
My windows Service Identity is using :
NT AuthorityNetworkService
Builtin Acct :NetworkService
Web Service Identity :-
ASP.NET Service Acct :- NT AuthorityNetworkService
DataBase Setup :- Credentials Type :- Service Credentials
I have also done everything from here thanks to Göran
http://stevenharman.net/blog/archive/2007/03/21/Avoiding-the-401-Unauthorized-Error-when-Using-the-ReportViewer-in.aspx
and
http://support.microsoft.com/default.aspx?scid=kb;en-us;896861
and
http://forum.k2workflow.com/viewtopic.php?t=619&
If you guys any solution for this please let me know.
I was wondering could this be a scale-out deployment issue ?
I also get the error when setting up the DataBase Setup :
Although saving the database connection info succeeded the The report server cannot access internal info about this deployment to determine whetherthe current con fig is valid for this editionThis could be a scale-out deployment and that the feature is not supported by this editionTo continue use a diff report server database or remove the encription keys
My Error log file is below:-
w3wp!webserver!5!16/05/2007-14:52:46:: i INFO: Reporting Web Server started
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Reporting Services starting SKU: Standard
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Evaluation copy: 0 days left
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Running on 1 physical processors, 2 logical processors
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Call to GetPermissions:/
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Catalog SQL Server Edition = Standard
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
View 8 Replies
View Related
Apr 10, 2007
I 'm trying to install Sql Server 2005 Express Edition using c# 2.0 by starting a process and launching setup. I also want to informed about installation progress. For instance i want to inform end user if any installation error return or if setup has successfully completed etc. I think i need a callback... I have no problem about silent - unattended install but how can i informed about running installation progress ? and send these info to end user 's form ?
Regards.
Yusuf Incekara
View 5 Replies
View Related
Oct 24, 2006
I'm running sql server ver 7.0 SP4.I have an access project (.adp) that runs a view which is nothing morethan a select statement. Access locks up solid when I try to run thisquery - with NO error messages what-so-ever.If I sign onto the server, and run the view from enterprise manager - Iget:"the data provider or other service returned an E_FAIL status" !?!?!There is NO ERROR number, or further explanation of the message!!Now - this query DID work last week - all of a sudden I get this error- I've:1) repaired / compacted this database2) rebooted the server3) spent several hours searching websites & groups for an explanationa) I don't care how useless some people think enterprise manager is -at least it gave me SOME kind of error; where access just locks up!b) There are no issues with null values, or problem date fieldsanywhere in these tables.4) tried MANY variations on the query, and am now more confused thanever.5) I've RUN THIS QUERY IN AN ACCESS MDB WITH LINKS TO THE SQL SERVER -AND IT WORKS!?!?!?!?The query I'm using follows; if I remove ONE field from the selectstatement - this query RUNS!!!It doesn't matter what field I remove! It's as if, I can only have somany fields in the select statement!?!?!?This is clearly ridiculous since the query ran fine last week with thesame number of fields, not thatthat should have anything to do with this, as sql shouldn't care howmany fields I request.I'm not actually requesting any fields in the last table - but if Iremove this table it works!? If I leave this table, and select fieldsfrom it, but remove another table - again it works!So my questions:1) What [T-] is going on here?2) Why would an mdb be able to run a query that an adp can not!?!?3) When will microsoft ever release a product that provides usefulerror messages?I really don't expect an answer to #3, because I know the answer isNEVER - microsoft doesn't want to make solving problems easy.Here's the query I'm using:SELECT codes.proj_id, answers.report_date,answers.release_date, answers.notes,answers.answer_date, answers.answer_person,answers.answer, answers.answer_status,answers.answer_person2, codes.cust_idFROM dbo.codes LEFT OUTER JOINdbo.demos ONdbo.codes.code = dbo.demos.code LEFT OUTER JOINdbo.answers ON dbo.codes.code = dbo.answers.codeany help appreciated - TIABob
View 2 Replies
View Related
May 5, 2014
I have a SQL 2012 Enterprise edition HADR cluster with 2 nodes and my event log on the second node (current primary for the AG) is being filled with these messages
The Service Broker endpoint is in disabled or stopped state
I wasn't able to find too much on the issue. I did find this one open Microsoft connect bug report from back in April 2013 [URL] .....
O/S: Windows 2012
SQL Server 2012 v11.0.3412
Currently 1 AG with 1 DB
View 3 Replies
View Related
Mar 22, 2007
I have the following setup
Machine 1
WSS 3.0
Installed Reporting Service Add-in
Machine 2
Reporting Service
Sharepoint Object Model
SQL Server
Sharepoint and Report Server DB
I have congigured Reporting Service for Sharepoint Integrated Mode adn Created new Reprot Server DB
Sahre Point Integration is Green and verified link
In Sharepoint Central Administration
Manage Reporting Service Integratio i have selected the URL and "Trusted Account" as my web applications use "Windows Integration - NTLM".
All services, DB access everything running under one domain user account.
I am logged into sharepoint with same account. When clieck on set server defaults i get following error
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.
Same error when i try to add a report to a sharepoint webapplication
The domain account is part of "Farm Administration", "site colletion administrato" and local administrator also on both servers.
Can someone let me know how to fix this.
View 15 Replies
View Related
Nov 22, 2006
Hi, I have a service using SQL 2005 Express database, the service is started automatically on system startup, most of the times it can logon to the database successfully, however, sometimes, I got the following error:
"Error: 18456, Severity: 14, State: 16"
Any suggestions?
Thanks in advance!
Yuxi
2006-11-22 11:09:49.90 Server Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2006-11-22 11:09:49.92 Server (c) 2005 Microsoft Corporation.
2006-11-22 11:09:49.92 Server All rights reserved.
2006-11-22 11:09:49.93 Server Server process ID is 1956.
2006-11-22 11:09:49.93 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2006-11-22 11:09:49.93 Server This instance of SQL Server last reported using a process ID of 1952 at 11/22/2006 11:08:07 AM (local) 11/22/2006 7:08:07 PM (UTC). This is an informational message only; no user action is required.
2006-11-22 11:09:49.95 Server Registry startup parameters:
2006-11-22 11:09:49.95 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2006-11-22 11:09:49.95 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2006-11-22 11:09:49.95 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2006-11-22 11:09:49.98 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-11-22 11:09:50.00 Server Detected 4 CPUs. This is an informational message; no user action is required.
2006-11-22 11:09:50.95 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-11-22 11:09:50.96 Server Database mirroring has been enabled on this instance of SQL Server.
2006-11-22 11:09:50.96 spid4s Starting up database 'master'.
2006-11-22 11:09:51.06 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2006-11-22 11:09:51.18 spid4s SQL Trace ID 1 was started by login "sa".
2006-11-22 11:09:51.23 spid4s Starting up database 'mssqlsystemresource'.
2006-11-22 11:09:51.25 spid4s The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2006-11-22 11:09:51.59 spid8s Starting up database 'model'.
2006-11-22 11:09:51.60 spid4s Server name is 'TestMachineTestSQLServer'. This is an informational message only. No user action is required.
2006-11-22 11:09:51.60 spid4s Starting up database 'msdb'.
2006-11-22 11:09:51.93 Server A self-generated certificate was successfully loaded for encryption.
2006-11-22 11:09:51.93 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalTestSQLServer ].
2006-11-22 11:09:51.93 Server Server local connection provider is ready to accept connection on [ \.pipeMSSQL$TestSQLServersqlquery ].
2006-11-22 11:09:51.93 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2006-11-22 11:09:51.95 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2006-11-22 11:09:52.12 spid8s Clearing tempdb database.
2006-11-22 11:09:53.12 spid8s Starting up database 'tempdb'.
2006-11-22 11:09:53.21 Logon Error: 18456, Severity: 14, State: 16.
2006-11-22 11:09:53.21 Logon Login failed for user 'sa'. [CLIENT: <local machine>]
2006-11-22 11:09:53.70 spid4s Recovery is complete. This is an informational message only. No user action is required.
2006-11-22 11:09:53.70 spid11s The Service Broker protocol transport is disabled or not configured.
2006-11-22 11:09:53.70 spid11s The Database Mirroring protocol transport is disabled or not configured.
2006-11-22 11:09:54.09 spid11s Service Broker manager has started.
2006-11-22 11:10:19.26 spid51 Starting up database 'TestDatabase'.
2006-11-22 11:10:19.42 spid51 Recovery is writing a checkpoint in database 'TestDatabase' (5). This is an informational message only. No user action is required.
2006-11-22 11:18:08.92 spid51 Starting up database 'TestDatabase'.
View 4 Replies
View Related
Jul 20, 2005
Anyone knows what would cause this?When Enterprise Manager is used to open a tableRuntime error data provider or other service provided an efail status
View 1 Replies
View Related
May 15, 2007
after converting database from sql server 2000 to sql server 2005. my program on vb6 is facing runtime error. i.e.data provider or other service returned an E_Fail status .
how can i get rid this problem
View 2 Replies
View Related
Apr 22, 2007
Dear all,
I am running an Access adp application with SQL Server 2005 as back end database. I run a query by using Management Studio query window, and it returned correct results with some columns containing NULL value. But when I run this query through MS Access client side, popup an error "Data provider or other service returned an E_FAIL status" and crash the Access application. I moved the database back to SQL Server 2000, and it runs perfect on both client side and server side returning the correct result. This query is important for the application. Please help!!!!
Query as followed:
SELECT TOP (100) PERCENT dbo.VWINFO312FYTRStreamEnrolments.StudentID, dbo.RequiredStreams.StreamType,
dbo.VWINFO312FYTRStreams.StreamCode + CAST(dbo.VWINFO312FYTRStreams.StreamNo AS varchar) AS FullStreamCode,
dbo.DaysOfWeek.DayCode, dbo.VWINFO312FYTRClasses.StartTime, dbo.VWINFO312FYTRClasses.EndTime, dbo.VWINFO312FYTRClasses.Room,
dbo.Tutors.TutorName, dbo.Tutors.PhoneExtn, dbo.Tutors.OfficeHours, dbo.DaysOfWeek.DaySequence, dbo.RequiredStreams.StreamOrder
FROM dbo.RequiredStreams INNER JOIN
dbo.VWINFO312FYTRStreams ON dbo.RequiredStreams.PaperID = dbo.VWINFO312FYTRStreams.PaperID AND
dbo.RequiredStreams.StreamCode = dbo.VWINFO312FYTRStreams.StreamCode INNER JOIN
dbo.VWINFO312FYTRStreamEnrolments ON dbo.VWINFO312FYTRStreams.PaperID = dbo.VWINFO312FYTRStreamEnrolments.PaperID AND
dbo.VWINFO312FYTRStreams.StreamCode = dbo.VWINFO312FYTRStreamEnrolments.StreamCode AND
dbo.VWINFO312FYTRStreams.StreamNo = dbo.VWINFO312FYTRStreamEnrolments.StreamNo LEFT OUTER JOIN
dbo.DaysOfWeek INNER JOIN
dbo.VWINFO312FYTRClasses ON dbo.DaysOfWeek.DayCode = dbo.VWINFO312FYTRClasses.DayofWeek ON
dbo.VWINFO312FYTRStreams.PaperID = dbo.VWINFO312FYTRClasses.PaperID AND
dbo.VWINFO312FYTRStreams.StreamCode = dbo.VWINFO312FYTRClasses.StreamCode AND
dbo.VWINFO312FYTRStreams.StreamNo = dbo.VWINFO312FYTRClasses.StreamNo LEFT OUTER JOIN
dbo.Tutors ON dbo.VWINFO312FYTRClasses.ResponsibleTutor = dbo.Tutors.TutorID
View 4 Replies
View Related
May 17, 2007
Main_Module.STRCNNN1 = "driver={SQL Server};server=" & Main_Module.Server_Name & ";" & _
"uid=SA;pwd=;database=" & Main_Module.Common_Database
error msg is
runtime error
data provider or other service returned an E_Fail status in sql server 2005
when i am fetching record from view using order by clause in select statement then error is coming
as
select * from vew_emp where grade='C' order empno
at the first time it fetching record with order by
but when i am using recordset.Requiry
it cud not fetch the record
i think when the recordset is open with the record of view
i am deleting ,inserting record in the view base table then the main recordset is not working
without using order by it is running and working well
plz reply me quickly
View 3 Replies
View Related
Mar 12, 2007
Hi,
SQL Server 2005 SP1. (+ 5 minutes fix installed).
Query notification subscription cretaed (sys.dm_qn_subscriptions).
Subscription does not fire in response to event.
sys.transmission_queue is empty.
profiler does not show errors.
sys.conversation_endpoints shows one endpoint in status SO. (along with a lot of left over garbage - about 300K records - but this should not be a problem other than storage).
I know SP2 is suppose to solve the garbage records problem but this is not our problem. This setup was working and then just stoped.
any ideas ?
Boaz
View 7 Replies
View Related
Dec 14, 2007
When I start Management Studio I get the following message and a suggestion to change a setting:
(I can choose to continue and the system databases appear, but the DB I created does not.)
"Unhandled exception has occurred in a component in your application. Cannot create a stable subkey under a volitile parent key."
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Any assistance is appreciated.
View 1 Replies
View Related
