Hi,
I was unable to start SQL Browser Services (time out) after installing SQL Server 2005 Analysis Services. The configuration of the server is
1. Win 2003 R2
2. Sql Server 2000 SP4
3. Sql Server 2005
Anybody has encountered this before? Any advice will be good.
Thanks!!
I tried the instructions in sqlexpress's WebLog to connect to a remote database.
Using SQL Server Configuration Manager I enabled TCP/IP and then tried to start the browser service.
When I right clicked the icon, all the options (Start,Stop,etc) are grayed out.
Can anyone help me with this, please?
Thank you
I am unable to start SQL service on my system after i rebooted it
following is the message that i get
SQL Service on Local Computer started and then stopped. Some service stop automatically if they have no work to do
following is the corresponding entry in event viewer
TDSSNIClient initialization failed with error 0x7e, status code 0x60.
Message logged in the SQL Server is
Failed to report the current event. Operating
system error = 31(A device attached to the system is not functioning.).
The OS has been Shutdown and Restarted again but I am not able to start the SQL Server thereafter.
Kindly Suggest
Hi Gurus,
I have installed MS analysis service(OLAP) on my lap top
my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service
I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group
I tried to install the service pack 3 from Microsoft
Could you pleae guide me to start this serivice
Thanks,
Hi all
When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..
Pls suggest..
Thanks in advance
Hi,
When I click on SQL Server agent I get the "Unable to start service error".
It says serivce started and stopped.
Anybody having any clue on what's going wrong. Please let me know.
Regards,
HV
hi all
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent
cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
Any advise?Thanks a lot.
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
SQLServer2005MSSQLServerADHelperUser$SQL1
SQLServer2005MSSQLUser$SQL1$SQLEXPRESS
SQLServer2005MSSQLBrowserUser$SQL1
I receive one alert int he event logs/application
EventID: 26010
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the
SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
View 2 Replies View Related
Hello,
I have Vista x64 and I had been fighting SQL Server for a few days and yesterday I decided for reinstallation. Unfortunately now I am not able to instal the server back!
Each time I got the following error (it refers to SQL Server service):
Code Snippet
<Func Name='LaunchFunction'>
Function=Do_sqlShutDownRANUInstance
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlShutDownRANUInstance
PerfTime Start: Do_sqlShutDownRANUInstance : Tue Sep 04 23:32:16 2007
<Func Name='Do_sqlShutDownRANUInstance'>
Service SQLEXPRESS with parameters '' is being started at Tue Sep 04 23:32:16 2007
Unable to start service (3)
Error Code: 0x80070003 (3)
Windows Error Text: System nie może odnaleźć określonej ścieżki.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 316
---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (F4:E4) [23:32:24:490]: I/O on thread 3716 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 788 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 2948 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 4392 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 5048 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4464 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4992 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4768 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:497]: I/O on thread 3004 could not be cancelled. Error: 1168
MSI (s) (F4!4C) [23:32:24:497]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) System nie może odnaleźć określonej ścieżki.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) System nie może odnaleźć określonej ścieżki.
.
<Failure Type='Fatal' Error='3'>
<EndFunc Name='LaunchFunction' Return='3' GetLastError='203'>
MSI (s) (F4:80) [23:32:24:507]: User policy value 'DisableRollback' is 0
MSI (s) (F4:80) [23:32:24:507]: Machine policy value 'DisableRollback' is 0
Action ended 23:32:24: InstallFinalize. Return value 3.
MSI (s) (F4:80) [23:32:24:512]: Executing op: Header(Signature=1397708873,Version=400,Timestamp=925154312,LangId=1033,Platform=0,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (F4:80) [23:32:24:512]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (F4:80) [23:32:24:513]: Executing op: DialogInfo(Type=1,Argument=Microsoft SQL Server 2005)
MSI (s) (F4:80) [23:32:24:514]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (F4:80) [23:32:24:516]: Executing op: ActionStart(Name=Do_sqlShutDownRANUInstance.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Running action to shutdown instance(Run As Normal User),)
MSI (s) (F4:80) [23:32:24:517]: Executing op: ProductInfo(ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},ProductName=Microsoft SQL Server 2005,PackageName=sqlrun_sql.msi,Language=1033,Version=151129058,Assignment=1,ObsoleteArg=0,ProductIcon=ARPIcon.ico,PackageMediaPath=Setup,PackageCode={08AD0897-0300-4F7D-A3CC-A0CCEDD42E0D},,,InstanceType=1,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (F4:80) [23:32:24:518]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,)
MSI (s) (F4:80) [23:32:24:519]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,)
MSI (s) (F4:80) [23:32:24:520]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,)
MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D258-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,)
MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D257-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,)
What can I do solve the problem?
All,
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it
and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
Thank for all help received in advance,
Dave.....
I have configured an instance to use static port, say 1435, and I turned off the Browser service.
I would like to know if I can use SSMSE to connect to the instance database directly. The instance is listening at port 1435 and accepting connection requests from other methods.
What I need to put into the "Server name: " field?
Normally, it would be like: <serverIP><InstanceID> with Browser turned on.
Now how do I add the port information to it, I tried
<serverIP>:<portNumber><InstanceID>
<serverIP><InstanceID>:<portNumber>
<serverIP><InstanceID> <portNumber>
None of them worked.
Any suggestions?
Thanks.
I installed SQL Server 2008 Express lastnight, and the server is running but I am unable to get Server Broswer, or Server Agent to start, when either is tried I get the following error:WMI Provider error.The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
View 5 Replies View RelatedHello,
I use SQL Server 2005 for multi-user access. In the Surface Area Configuration, I changed the protocol from TCP/IP to Named Pipes and restarted the service. Then I went to SQL Server Browser, stopped it and clicked on Start to restart. I am getting a message "An error occurred while performing this operation". I am not able to get the Browser started.
Any help would be greatly appreciated.
Hi ,
I have got an SQL query which gives me some report against some data fed in .How can I set this query to run from a browser window .Meaning there will be some form where we input the data ( say date ) and run that query from the browser windows against that data .and the results are displayed in the browser window .
Thanks for your help
Hi,
I was trying to start the SQL Server Browser service but to no avail. I got the error message from WMI Provider Error and the following is the description of it
"The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. [0x80070422]"
By the way, this is for SQL Server 2005 Express Edition running on XP Pro.
Wondering if anyone might be able to help me out.
Thank you in advance
I just finished installing SQL Server 2005 Express including the Toolkit.
During installtaion I selected instance name as SQLExpress.
I cannot start SQLServer nor SQL Browser services and reports Event ID 7000 with a message Path not found.
Although, the entire installation ran error free. I am running Winodws XP Professional w/SP2 and up-to date patches. Please help!
yaj
I am using SQL Server 2005 developer edition and Visual Studio 2005. I am working on local computer and when I define a cube I am using data sources to which I can connect without any problem using "Test connection". However, when I want to perform calculation or browse a cube I get a message of either I am as a user do not have permission to access source database (in reality I do have this permission) or source database does not exist (in reality it exists). I check the SQL Server Browse Service and it is not running and the option of starting it is disabled (Start mode is undefined and only properties option can be used). I already have enabled the TCP/IP and Named Pipes protocols but I still cannot browse cube data.
Any help SUPER welcome.
Elka
I read an MSDN article that states the following.
SQL Server Browser listens on a UDP port and accepts unauthenticated requests using SQL Server Resolution Protocol (SSRP). SQL Server Browser should be run in the security context of a low-privileged user to minimize exposure to a malicious attack. By default, SQL Server Browser starts using the Local System account. The logon account can be changed by using the Windows Services program. The minimum user rights for SQL Server Browser are as follows:
* Deny access to this computer from the network.
* Deny logon locally.
* Deny logon as a batch job.
* Deny logon through Terminal Services.
* Log on as a service.
* Read and write the SQL Server registry keys related to network communication (ports and pipes).
In our case the SQL Server Browser service is running under the same Windows account as our other SQL Server services. Do you recommend creating a separate Windows account for the SQL Server Browser service as described above?
Can you help me understand how an attack can occur?
Thanks, Dave
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
I recently setup mutliple instances of SQL Server Express at my office. I have 1 default instance, and two named instances. I can connect to the named instance of the default port of 1433 with Microsoft SQL Management Studio Express, however the other instances on dynamic TCP ports can not be accessed by the instance name over the internet. I have to specify the dynamic TCP port in this form: xxx.uconn.edu/SQLTEST, Port number. My current thinking is that the SQL Browser service should tell Management Studio Express what dynamic port number each SQL instance is listening to. Any ideas?
View 1 Replies View Related
Please assist, the issue with SQL 2005 Browser and SQL 2000 Server Service is understood.
Our problem is with networked 2000 instances and SQL Express. The SQL 2000 machines (Standard & MSDE) do not have SQL 2005 or Express installed only 2000. When a SQL Express computer is put on the network with the SQL Browser service running almost all SQL 2000 machines lose sight of the other SQL 2000 instances. The second the
SQL Browser is turned off on the SQL Express box the SQL 2000 machines can see each others instances.
It appears that the response from the SQL Express SQL Browser causes the SQL 2000 machine to stop listening for responses. Once in a while one of the SQL 2000 instances will show up with the SQL Browser active on the network and it is my belief that it is because that response made it in before the SQL browser response. Please help as this does not appear to be a recognized issue. I'm assuming there aren't many sites running as many named instances on individual machines like we do.
Please note this appears to be a problem with SQL Express Browser not SQL 2005 Standard's which runs without problems on our network.
THANK YOU!
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
Hi
I have downloaded and installed the trial version of MS Visual Studio 2005 Team System. The installation was successful. However, I am not able to start SQLEXPRESS using the SQL Server Configuration Manager. It shows me SQLEXPRESS but when I right click and select Start it tries to start the service and after some time gives the following error
"The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details."
The event log shows the following errors:
1. FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2. FCB::Open failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
I tried enabling remote connections but still got the same error.
Please help.
Regards
Rajat
My Server service will not start, i get a message saing consult the logs, in the error logs it says error in the model db .ldf file. However, i can not connect to the server to restore from my back ups. I get the error msg, your server may not be configured to accept remote connection. No, i dont know what im doing and my only though is to start from scratch reinstalling the server. Any help is apreciated.
View 6 Replies View RelatedI need to start SQL Server Agent so that I can run scheduled jobs. I am running SQL Server 7.0 with windows NT 4.0 service pack 4. When I try to start the agent I get the following error
Error 22003: StartService() returned error 5,'Access is denied'
Does anyone have an idea as to why this is happening?
Any help with this problem would be appreciated.
Thanks
Phil
Hi,
I get this error message each time i try to run the vb application in visual studio .net environment.
--------------------------------------------------------------------------------
"Unable to start SQL debug session. Ensure sqldbreg2.exe and proxy/stub DLL sqldbg.dll are registered on this machine"
-------------------------------------------------------------------------------
I am running visual studio and sql server 2000 on the same machine. I have given permission to sqldebugger user to access the system32 folder and sql debugging folder. This error message is followed by
-------------------------------------------------------------------------------
Attaching the T Sql debugger to process[proj1.exe] on machine 'my machine name' failed Error code 0x80004004
------------------------------------------------------------------------------
I am running MS SQL Server 2000 on windows 2000 adv server.
what can be done to remove this error. Thaks in advance
Sivaraj.
As my sql agent is not starting due to XP's are disabled . when I ran the sp_configure with override and changed to 0 to 1 when I am starting the agent the configured value will be back to again 0 and in logs.Waiting for SQL Server to recover database 'msdb'...ODBC Error: 0, Invalid character value for cast specification [SQLSTATE 22018]
View 1 Replies View RelatedI have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.
Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"
I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?
www.accellus.com
Hello Friends
I'm running VS2005prof.+sp1, SSE Adv (with sp2) SSE ToolKit. Its been running without problems since installation (April 12.2007) Last week I ran into a problem which started off as
"An attempt to attach an auto-named database for file D:DataVBNetVisual Studio 2005ProjectSolutionsAR1403inDebuginDebugApp_DataAR1403.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
and went down hill rapidly to the point now where I can't even start it up. Here's the error log:
2007-07-21 22:51:07.55 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-07-21 22:51:07.55 Server (c) 2005 Microsoft Corporation.
2007-07-21 22:51:07.55 Server All rights reserved.
2007-07-21 22:51:07.55 Server Server process ID is 2656.
2007-07-21 22:51:07.55 Server Authentication mode is WINDOWS-ONLY.
2007-07-21 22:51:07.56 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-07-21 22:51:07.56 Server This instance of SQL Server last reported using a process ID of 304 at 7/21/2007 5:42:20 PM (local) 7/21/2007 9:42:20 PM (UTC). This is an informational message only; no user action is required.
2007-07-21 22:51:07.66 Server Registry startup parameters:
2007-07-21 22:51:07.66 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-07-21 22:51:07.66 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-07-21 22:51:07.66 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-07-21 22:51:07.75 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-07-21 22:51:07.75 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-07-21 22:51:07.86 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-07-21 22:51:08.02 Server Database mirroring has been enabled on this instance of SQL Server.
2007-07-21 22:51:08.04 spid5s Starting up database 'master'.
2007-07-21 22:51:08.70 spid5s SQL Trace ID 1 was started by login "sa".
2007-07-21 22:51:08.85 spid5s Starting up database 'mssqlsystemresource'.
2007-07-21 22:51:08.99 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-07-21 22:51:09.51 spid8s Starting up database 'model'.
2007-07-21 22:51:09.51 spid5s Server name is 'ADSSQLEXPRESS'. This is an informational message only. No user action is required.
2007-07-21 22:51:09.52 spid5s Starting up database 'msdb'.
2007-07-21 22:51:10.08 Server Error: 17190, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server FallBack certificate initialization failed with error code: 1.
2007-07-21 22:51:10.08 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-07-21 22:51:10.08 Server Error: 17826, Severity: 18, State: 3.
2007-07-21 22:51:10.08 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-21 22:51:10.08 Server Error: 17120, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-----------
I've tried following various suggestions I found on the Net, however, after 3-days it does seem as though I'm not getting anywhere. Shoud I uninstall and re-install SSE and if so is there a specific step by step step procedure I can follow. Or is there a sure fire way to fix the probelm without re-installation?
Your help is greatly appreciated.
Gary
Recently we rebuilt one of the cluster node (due to some issues with SP), where distribution agent resource or instance was running after rebuilding that node, we failed over distribution resource to that (newly built) node and after that log reader agent jobs were in suspended status. After checking the job history, we got the below error "Unable to start execution of step 2 (reason: The LogReader subsystem failed to load [see the file for details]; The job has been suspended). The step failed."After getting lot of search did not get exact solution which matches to the environment
View 3 Replies View RelatedI have a SQL 2k5 ent. 64 bit on Windows 2003 Ent x64 edition.
The sql server was running fine under localsystem account. Recently I changed the service account to a local user (part of users group in windows) and implemented permissions according to KB article 283811. (have imlpemented the same on many other sql servers without issue).
However, the SQL services are not starting up and I am seeing the following errors in the errorlog.
===================
2007-07-25 12:36:55.90 spid11s Server name is 'HBCARPROD'. This is an informational message only. No user action is required.
2007-07-25 12:36:55.90 spid13s Starting up database 'model'.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x51.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x1.
2007-07-25 12:36:55.90 Server Error: 17826, Severity: 18, State: 3.
2007-07-25 12:36:55.90 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-25 12:36:55.90 Server Error: 17120, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
====================================
I have gone through the http://blogs.msdn.com/sql_protocols but everything mentioned here seems to be there. I understand this is some permission issue. Just not able to find it out. Can anybody help?