Hi all
When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..
Pls suggest..
Thanks in advance
Hi,
When I click on SQL Server agent I get the "Unable to start service error".
It says serivce started and stopped.
Anybody having any clue on what's going wrong. Please let me know.
Regards,
HV
I am unable to start SQL service on my system after i rebooted it
following is the message that i get
SQL Service on Local Computer started and then stopped. Some service stop automatically if they have no work to do
following is the corresponding entry in event viewer
TDSSNIClient initialization failed with error 0x7e, status code 0x60.
Message logged in the SQL Server is
Failed to report the current event. Operating
system error = 31(A device attached to the system is not functioning.).
The OS has been Shutdown and Restarted again but I am not able to start the SQL Server thereafter.
Kindly Suggest
Hi Gurus,
I have installed MS analysis service(OLAP) on my lap top
my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service
I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group
I tried to install the service pack 3 from Microsoft
Could you pleae guide me to start this serivice
Thanks,
Hi,
I was unable to start SQL Browser Services (time out) after installing SQL Server 2005 Analysis Services. The configuration of the server is
1. Win 2003 R2
2. Sql Server 2000 SP4
3. Sql Server 2005
Anybody has encountered this before? Any advice will be good.
Thanks!!
hi all
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent
cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
Any advise?Thanks a lot.
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
SQLServer2005MSSQLServerADHelperUser$SQL1
SQLServer2005MSSQLUser$SQL1$SQLEXPRESS
SQLServer2005MSSQLBrowserUser$SQL1
I receive one alert int he event logs/application
EventID: 26010
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the
SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
View 2 Replies View Related
Hello,
I have Vista x64 and I had been fighting SQL Server for a few days and yesterday I decided for reinstallation. Unfortunately now I am not able to instal the server back!
Each time I got the following error (it refers to SQL Server service):
Code Snippet
<Func Name='LaunchFunction'>
Function=Do_sqlShutDownRANUInstance
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlShutDownRANUInstance
PerfTime Start: Do_sqlShutDownRANUInstance : Tue Sep 04 23:32:16 2007
<Func Name='Do_sqlShutDownRANUInstance'>
Service SQLEXPRESS with parameters '' is being started at Tue Sep 04 23:32:16 2007
Unable to start service (3)
Error Code: 0x80070003 (3)
Windows Error Text: System nie może odnaleźć określonej ścieżki.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 316
---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (F4:E4) [23:32:24:490]: I/O on thread 3716 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 788 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 2948 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 4392 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 5048 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4464 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4992 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4768 could not be cancelled. Error: 1168
MSI (s) (F4:E4) [23:32:24:497]: I/O on thread 3004 could not be cancelled. Error: 1168
MSI (s) (F4!4C) [23:32:24:497]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) System nie może odnaleźć określonej ścieżki.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) System nie może odnaleźć określonej ścieżki.
.
<Failure Type='Fatal' Error='3'>
<EndFunc Name='LaunchFunction' Return='3' GetLastError='203'>
MSI (s) (F4:80) [23:32:24:507]: User policy value 'DisableRollback' is 0
MSI (s) (F4:80) [23:32:24:507]: Machine policy value 'DisableRollback' is 0
Action ended 23:32:24: InstallFinalize. Return value 3.
MSI (s) (F4:80) [23:32:24:512]: Executing op: Header(Signature=1397708873,Version=400,Timestamp=925154312,LangId=1033,Platform=0,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (F4:80) [23:32:24:512]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (F4:80) [23:32:24:513]: Executing op: DialogInfo(Type=1,Argument=Microsoft SQL Server 2005)
MSI (s) (F4:80) [23:32:24:514]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (F4:80) [23:32:24:516]: Executing op: ActionStart(Name=Do_sqlShutDownRANUInstance.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Running action to shutdown instance(Run As Normal User),)
MSI (s) (F4:80) [23:32:24:517]: Executing op: ProductInfo(ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},ProductName=Microsoft SQL Server 2005,PackageName=sqlrun_sql.msi,Language=1033,Version=151129058,Assignment=1,ObsoleteArg=0,ProductIcon=ARPIcon.ico,PackageMediaPath=Setup,PackageCode={08AD0897-0300-4F7D-A3CC-A0CCEDD42E0D},,,InstanceType=1,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (F4:80) [23:32:24:518]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,)
MSI (s) (F4:80) [23:32:24:519]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,)
MSI (s) (F4:80) [23:32:24:520]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,)
MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D258-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,)
MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D257-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,)
What can I do solve the problem?
All,
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it
and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
Thank for all help received in advance,
Dave.....
My Server service will not start, i get a message saing consult the logs, in the error logs it says error in the model db .ldf file. However, i can not connect to the server to restore from my back ups. I get the error msg, your server may not be configured to accept remote connection. No, i dont know what im doing and my only though is to start from scratch reinstalling the server. Any help is apreciated.
View 6 Replies View RelatedI need to start SQL Server Agent so that I can run scheduled jobs. I am running SQL Server 7.0 with windows NT 4.0 service pack 4. When I try to start the agent I get the following error
Error 22003: StartService() returned error 5,'Access is denied'
Does anyone have an idea as to why this is happening?
Any help with this problem would be appreciated.
Thanks
Phil
I have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.
Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"
I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?
www.accellus.com
I am trying to migrate a instance , while trying to rename the server i am getting the following error.
Error: Instance name exceeds maximum length
Aborting Initialization
The instance name is 20 char long.
Please let me know if there is any workaround.
Thanks in advance.
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
Thanks in advance for any ideas.
Please help! I cannot debug CLR procs remotely. Whenever I try to start debugging in VS2005 I get the error: Unable to start T-SQL Debugging. Could not attach to SQL Server process on .... I have clr enabled set to 1 and I have Allow SQLCLR Debugging set on. But I continue to get this error. Any help would be greatly appreciated.
Thanks!
GN
I successfully installed SQL Server 2005 and then used the ALTER DATATBASE statement to move around my data and log files for Model, MSDB and TEMPDB. I stopped SQL SERVER Services and physically moved the files to their new locations.. now the service won't start? I get this in the SQL Server ERROLOG:
Starting up database 'model'.
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'E:MSSQLAMLDataFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open failed: Could not open file E:MSSQLAMLDataFiles for file number 1. OS error: 5(Access is denied.).
2008-03-17 15:57:01.29 spid4s Server name is 'KOCSQLDEV01AML'. This is an informational message only. No user action is required.
2008-03-17 15:57:01.29 spid9s Error: 5120, Severity: 16, State: 101.
2008-03-17 15:57:01.29 spid9s Unable to open the physical file "E:MSSQLAMLDataFiles". Operating system error 5: "5(Access is denied.)".
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'F:MSSQLAMLLogFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
I can log on to the Server with the account that starts the services and open the .mdf and .ldf files in Notepad.. not sure what's going on.. I then gave the Domain Account that starts the Services Full Control on each of the volumes that I moved the files to.. I checked down to the file level to make sure that the permissions propogated.. the service still won't start.. can someone help?
Had some big problems with my SQL Server 2008 R2 SP1 during the last maintenance running on Windows Server 2008 R2 Enterprise ( upgraded from Standard). I'm getting the following error,
"SQL Server blocked access to procedure 'dbo.sp_sqlagent_has_server_access' of component 'Agent XPs' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Agent XPs' by using sp_configure. For more information about enabling 'Agent XPs', see "Surface Area Configuration" in SQL Server Books Online."
I did a google search and found others with the problem but the resolution isn't working for me. I ran the following commands, heck I ran them multiple times. No errors come back running these commands. But the same error keeps happening, I even restart the service and then the server again.
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Agent XPs', 1;
GO
RECONFIGURE
GO
The msdb got too big for the disk it was on. I had maintenance plans to clear out the all of histories but I didn't think of the mail items. When I finally saw this problem I tried clearing them out using the stored procedures only with it finally failing because the transaction log got full. Since we didn't have a lot of jobs scheduled I decided to just recreate the msdb. So I scheduled a maintenance window, download SQL Server Service Pack 3.
my steps are as follows:
->diff backup of msdb
->stopped the service and started it again with: NET START MSSQLSERVER /T3608
->detached msdb with: SQLCMD -E -SP-SRVR-SQL-01 -dmaster -Q"EXEC sp_detach_db msdb"
->moved it off the drive
->restarted the service without any startup flags
->recreated msdb with: SQLCMD -E -SP-SRVR-SQL-01 -i"D:Microsoft SQL ->ServerMSSQL10_50.MSSQLSERVERMSSQLInstallinstmsdb.sql" -o"D:Microsoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLInstallinstmsdb62715.out"
I looked at the log file and there were no actual error messages so I applied service pack 3 and restarted server after it installed, was actually prompted to restart. In my tests I was never prompted to restart the server.Now I never started the agent service after recreating the msdb database since I knew it wasn't on the same version. I just went directly to the latest SP. Our applications are running fine but now I cant do scheduled backups.
Hi can someone help me please? I browsed through the SP2 install feedback below, but it doesn't quite seem to fit what happened to my install. My .MDF and .LDF files for the system databases are in C:Program FilesMicrosoft SQL ServerMSQL.1MSQLData (I presume this is the correct location.)
I am the local administrator on this box.
I uploaded the .CAB file with all the logs onto www.sendspace.com if it gives you something to go on.
The only other thing of note is that it said there were two machines on the network and that I needed to change my machine name in the control panel when I installed. This doesn't seem right, as far as I understand the computer name is unique.
The SQL Server runs under the local system account, if that is of any use.
I attempted uninstalling and reinstalling the SQL native client MSI package in the hope it would be a simple fix similar to that chap further down the page, but that didn't help at all either.
.CAB file of installation logfiles is here: http://www.sendspace.com/file/7ihoet
kind regards
Jason
ERRORLOG starting SQL Server post failed SP2 install
2007-06-12 19:55:21.94 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-06-12 19:55:21.96 Server (c) 2005 Microsoft Corporation.
2007-06-12 19:55:21.96 Server All rights reserved.
2007-06-12 19:55:21.97 Server Server process ID is 5468.
2007-06-12 19:55:21.97 Server Authentication mode is MIXED.
2007-06-12 19:55:21.97 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-06-12 19:55:21.97 Server This instance of SQL Server last reported using a process ID of 5756 at 12/06/2007 19:36:35 (local) 12/06/2007 18:36:35 (UTC). This is an informational message only; no user action is required.
2007-06-12 19:55:21.97 Server Registry startup parameters:
2007-06-12 19:55:21.99 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-06-12 19:55:21.99 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-06-12 19:55:21.99 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-06-12 19:55:22.00 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-06-12 19:55:22.00 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-06-12 19:55:22.17 Server Address Windowing Extensions is enabled. This is an informational message only; no user action is required.
2007-06-12 19:55:22.33 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-06-12 19:55:22.57 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-06-12 19:55:23.60 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-06-12 19:55:23.63 Server Database mirroring has been enabled on this instance of SQL Server.
2007-06-12 19:55:23.72 spid5s Starting up database 'master'.
2007-06-12 19:55:24.07 spid5s SQL Trace ID 1 was started by login "sa".
2007-06-12 19:55:24.11 spid5s Starting up database 'mssqlsystemresource'.
2007-06-12 19:55:24.13 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-06-12 19:55:24.29 spid5s Server name is 'GBLOND088SQ8MSQL_CREDS_DEV1'. This is an informational message only. No user action is required.
2007-06-12 19:55:24.29 spid9s Starting up database 'model'.
2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1e.
2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1.
2007-06-12 19:55:24.30 Server Error: 17826, Severity: 18, State: 3.
2007-06-12 19:55:24.30 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-06-12 19:55:24.30 Server Error: 17120, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies View RelatedI recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies View RelatedI recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies View RelatedHello,
I had installed SQL express yesterday, and it did function, but due some other problems, i uninstalled it, and reinstalled SQL express 2005. Appearantly, there is some rest of the old installation, blocking me to start a new installation.
The link provided by the program (below) does not connect to any page.
I would appreciate some help, thanks in advance.
Regards,
Ruud
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29503&EvtType=sqlsetuplib%5cservice.cpp%40Do_sqlShutDownRANUInstance%40sqls%3a%3aService%3a%3aStart%40x3
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
I'm newbe with SQL Server , I'm looking for help with sql server express edition 2005. At the end of installation ocurrs an error:
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually.
Error Number : 29503 . (Summary file)
Rest of components has status : Successfully installed
I've go installed .Net Framework 2.0, I'm using XP with SP2 , no anty-virus software during instalatin is activated, the XP firewall is off during instalation.All system check requirements are passed successufully
(running on Athlon64)
No additional software bound with SQL is installed.(in add/remove programs there is nothing additional connected with sql)
I've re-installed it few times with some other options (network , local) ,different installation path ,but allways the same result - fail. I've tried to find help in few similar posts but that didn't help.Mayby i've miss somethin'
Could someone help ?
I have mentioned this problem before but it has not been resolved. I am installing MS SQL Server Express Advanced i.e. using SQLEXPR_ADV.EXE.
During the initial checks, i get a warning about hardware requirements and I have read the posts about the install failing if the CPU does not support prefetching but I am running a P4 3.0GHz (twin core) CPU with 512MB RAM on Windows XP Pro SP2.
The installation fails at SQL Server Database Services during "Configuring Microsoft SQL Server":
"Starting SQL Service: MSSQL$SQLEXPRESS"
If I click the Retry button, the system goes away and then comes back with the same message. If I click cancel, various roll-back actions are performed and the install fails
Is this the default name for the SQL Server instance ? I thought it would be named after my machine name i.e. GLKD239680SQLExpress ?
Any ideas anyone ? I have not had much luck with installing this despite 2 PC rebuilds and scanning the forums for solutions.... I can post any log files if needed
Thanks
here is the error log. instance is already on SP2. all of a sudden instance stopped. any idea?
2007-04-04 16:34:16.31 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64)
Feb 10 2007 00:59:02
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-04-04 16:34:16.31 Server (c) 2005 Microsoft Corporation.
2007-04-04 16:34:16.31 Server All rights reserved.
2007-04-04 16:34:16.31 Server Server process ID is 2748.
2007-04-04 16:34:16.31 Server Authentication mode is MIXED.
2007-04-04 16:34:16.31 Server Logging SQL Server messages in file 'S:Microsoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-04-04 16:34:16.31 Server This instance of SQL Server last reported using a process ID of 4720 at 4/4/2007 4:32:23 PM (local) 4/4/2007 8:32:23 PM (UTC). This is an informational message only; no user action is required.
2007-04-04 16:34:16.31 Server Registry startup parameters:
2007-04-04 16:34:16.31 Server -d S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-04-04 16:34:16.31 Server -e S:Microsoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-04-04 16:34:16.31 Server -l S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-04-04 16:34:16.31 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-04-04 16:34:16.31 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-04-04 16:34:16.42 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-04-04 16:34:16.45 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-04-04 16:34:18.01 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-04-04 16:34:18.01 Server Database mirroring has been enabled on this instance of SQL Server.
2007-04-04 16:34:18.03 spid5s Starting up database 'master'.
2007-04-04 16:34:18.03 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-04 16:34:18.03 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-04 16:34:18.03 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-04 16:34:18.03 spid5s FCB:pen failed: Could not open file S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf for file number 1. OS error: 5(Access is denied.).
2007-04-04 16:34:18.03 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-04 16:34:18.03 spid5s Unable to open the physical file "S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf". Operating system error 5: "5(Access is denied.)".
2007-04-04 16:34:18.05 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-04 16:34:18.05 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-04 16:34:18.05 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-04 16:34:18.05 spid5s FCB:pen failed: Could not open file S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
2007-04-04 16:34:18.05 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-04 16:34:18.05 spid5s Unable to open the physical file "S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf". Operating system error 5: "5(Access is denied.)".
I had a strange experience with MS SQL Server 2005 Express Edition installation, I am running a P4 3G Processor, 1 GB of RAM, Windows XP SP2, 300 GB HDD (SATA if it matters at all :) ) And using Visual Studio Pro 2005.
I have managed to install the SQL Express with no hassle at all, then had to format my HDD, and start from scratch, to make a new home for my VS 2005 Pro (The 300 GB HDD) And managed to install the SQL Express as part of the VS 2005 without any problems, after using it for 3 months now, I've started a new project in VS 2005, and tried to add a new SQL DB, but it had failed for several times.
I€™ve decided that the files got corrupted for some reason and tried to reinstall the MS SQL 2005 using the original SQL Express installation file I've used before, but without joy.
I thought that it is conflicting with some new MS Update patch and downloaded the latest SQL Express advanced installation, but that did not fix the problem either.
The message I'm getting every time I attempt the installation is" SQL Server service failed to start" with all the bla bla about the online books and whatever useless stuff to learn how to start the service manually.
I have uninstalled the whole thing, including VS 2005, .NET Framework, and any registry trace of the SQL Server installation, but again all in vain.
Finally, some smart wizard suggested in one of the threads that if your computer is not part of a domain, you should run the SQL service as a local service, using the advanced option during the first step of the setup.
And guess what! It worked!!!!
My Question is why did it work during the first two installations, without me fiddling with the advanced installation feature?
My computer was and still is, not part of any domain, my hardware did not change at all, and I had the installation failing with or without any software installed!
I have had SQL Server 2005 (Full Version) installed along with SQL Server Express and suddenly SQL Express quit starting and will not start manually. I have reinstalled VS 2005 (Team Edition for Software Dev) and tried to reinstall SQL Express but the installation fails when it tries to start the service. Any suggestions?
Keith
I've installed Visual Studio 2005 Professional evaluation edition on both my desktop & on the server to try out the Debugger to be used with my Stored procedures
I got this error message every time i try to 'Step into Stored Procedure' from my desktop to connect to the stored procedure which resides on the Server.
Error message: Unable to Start T-SQL Debugging. Could not attach to SQL Server Process on 'Server1'.The RPC server is unavailable
The 'Step into Stored Procedure' works though if I open the stored procedure directly on the server.
Both my PC and Server has been installed with Remote Debugger and my windows login has been assigned permission to debug on the debugger that resides on the Server and has sysadmin server role on SQL 2005 both on PC and Server.
Can someone tell me what i miss out to debug Stored procedure in the SQL Server 2005 on the Server from my PC?
Thanks in advance.
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
Can Anyone explain why my Report Service does not start up during installation of reporting services.
ASPNET account has full permissions.
A previous Reporting Services beta was installed (and working) before.
Here's the event explanation:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities. ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files ---> System.Exception: The configuration file contains an element that is not valid. The Permissions element is not a configuration file element.
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.ThrowInvalidFormat(String element)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseExtensionElement(XmlNode child, Extension& extension)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseDeliveryExtensions(XmlNode child, ExtensionArray array)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseExtensions(XmlNode child, ExtensionArray array)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseXML(XmlNode node)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.ParseDocument()
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Load(Boolean searchMultipleLocations, Boolean trapLoadFailures)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Load(Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Construct(String configFileName, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation..ctor(String configFileName, String additionalSearch, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ationManager..ctor(String configFileName, String additionalSearch, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ationManager..ctor(String configFileName, String additionalSearch)
at Microsoft.ReportingServices.Library.Global.get_Con figurationManager()
at Microsoft.ReportingServices.Library.ServiceAppDoma inController.Start()
at Microsoft.ReportingServices.NTService.ReportServic e.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMai nCallback(Object state)
For more information, see Help and Support Center at
Thanks,
Tom
hey
I have a notebook with windows vista ultimate edition. For developement i have Ms visual studio 2005 and sql server 2005(with all the required and latest SPs) on it. For the past few months i have been working on the machine without any hitches. Just 2 -3 days back some windows updates got installed on the machine and guess what!!!!!! the sql server service just stopped working. The service wont start no matter what. I
have tried almost solution that i came across on the internet and it wont work out. I unistalled and reinstalled the server as but to no avail. The database engine now wont intall as the sql service wont start during the server installlation.
While browsing through the internet i didnt come across anyone with a similar problem! Am i the first one to be in such a situation
give your comments and share any relevant experience.
P.s the windows upgrades installed on the system were all security upgrades so why should they effect the sql server working.
Rgds