Unable To Start SQLEXPRESS
Nov 26, 2006
Hi
I have downloaded and installed the trial version of MS Visual Studio 2005 Team System. The installation was successful. However, I am not able to start SQLEXPRESS using the SQL Server Configuration Manager. It shows me SQLEXPRESS but when I right click and select Start it tries to start the service and after some time gives the following error
"The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details."
The event log shows the following errors:
1. FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2. FCB::Open failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
I tried enabling remote connections but still got the same error.
Please help.
Regards
Rajat
View 5 Replies
ADVERTISEMENT
Mar 13, 2007
I can't start SQLEXPRESS.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
View 3 Replies
View Related
Jun 16, 2007
I have just had to reinstall all my SQLServer instances (SQL2005 Standard, BCM2007, and SQLEXPRESS).
The first two have started fine, but I cannot get the SQLExpress instance to start. When I start in the Management Studio, the error I get is:-
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Loating Server/Instance Specified) (Microsoft SQL Server)."
Can anyone tell me what I have to do to correct this problem:?
I have looked in the Add or Remove Programs window and cannot see ANY instance relating to SQL Server Express 2005.
View 9 Replies
View Related
Apr 21, 2008
I had a working VS Express 2005 system 2 years ago and have not done any development on it since. Recently I wanted to enhance the application I had developed and so updated my system to VS EXpress 2008 and now can't start my database service. What do I need to do to get access to my database again?
I am running on an up to date Windows XP Pro system
Dennis J.
View 9 Replies
View Related
Oct 17, 2006
I am a beginner with regard to SQL Server, having previously used Access 2000 databases in my programs.
Recently I installed VB 2005 Express and SQL Server 2005 Express on both my desktop computer and my laptop and have been working at migrating one of my earlier programs, written in VB6 /Access 2000, to VB Express 2005.net/SQL Server 2005.net.
Whilst my desktop version works well, I found that, for some unknown reason, SQLEXPRESS refuses to start automatically on my laptop, despite the fact that it is set that way. (It will start if I open the Configuration Manager and start it from there.) Since the configuration settings on my laptop are the same as those that work on my desktop, I cannot understand why the laptop version doesn't work.
Has anyone any ideas?
NewBarr
View 3 Replies
View Related
Mar 9, 2006
If my laptop goes into standby with the MSSQL$SQLEXPRESS service running, the service will not start again. I get the following error messages in my log:
2006-03-06 20:49:08.45 Server This instance of SQL Server last reported using a process ID of 1764 at 3/6/2006 1:48:21 PM (local) 3/6/2006 9:48:21 PM (UTC). This is an informational message only; no user action is required.
2006-03-06 20:49:08.45 Server Error: 17053, Severity: 16, State: 1.
2006-03-06 20:49:08.45 Server UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
2006-03-06 20:49:08.45 Server Registry startup parameters:
2006-03-06 20:49:08.45 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2006-03-06 20:49:08.45 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2006-03-06 20:49:08.45 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2006-03-06 20:49:08.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-03-06 20:49:08.56 Server Detected 1 CPUs. This is an informational message; no user action is required.
2006-03-06 20:49:09.32 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-03-06 20:49:09.35 Server Database Mirroring Transport is disabled in the endpoint configuration.
2006-03-06 20:49:09.35 spid5s Starting up database 'master'.
2006-03-06 20:49:09.68 spid5s SQL Trace ID 1 was started by login "sa".
2006-03-06 20:49:09.76 spid5s Starting up database 'mssqlsystemresource'.
2006-03-06 20:49:10.03 spid5s Failed to check for new installation or a renamed server at startup. The logic for this check has failed unexpectedly. Run setup again, or fix the problematic registry key.
2006-03-06 20:49:10.03 Server Error: 17182, Severity: 16, State: 1.
2006-03-06 20:49:10.03 Server TDSSNIClient initialization failed with error 0x5, status code 0x90.
2006-03-06 20:49:10.03 Server Error: 17182, Severity: 16, State: 1.
2006-03-06 20:49:10.03 Server TDSSNIClient initialization failed with error 0x5, status code 0x1.
2006-03-06 20:49:10.03 Server Error: 17826, Severity: 18, State: 3.
2006-03-06 20:49:10.03 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2006-03-06 20:49:10.03 Server Error: 17120, Severity: 16, State: 1.
2006-03-06 20:49:10.03 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Uninstalling, reinstalling and restoring the databases fixes the problem. Also, is there anyway to gracefully shut down the service on standby? Any help would be greatly appreciated.
Thanks,
David
View 7 Replies
View Related
Apr 2, 2006
I have set up a database in SQL Server 2005 (The express version) and am trying unsucessfully to make a connection to it from MS Visual Web Developer 2005 Express version. I always get the same error:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this error may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - could open a connection to SQL Server)"
How can I set up SQL Server to allow remote connections? I am trying to establish a connection from my web page to this database. Is there a user that I need to establish on the SQL Server side?
View 3 Replies
View Related
Jul 13, 2007
This is by FAR, the most frustrating problem I have dealt with for a while.I have a project containing a SqlExpress database that I created in Visual Studio 2005. Everything works perfectly on my development machine. However, upon copying the site up to the webserver, I get an error stating:An attempt to attach an auto-named database for file
D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the
same name exists, or specified file cannot be opened, or it is located
on UNC shareI have read almost every article/forum post that resulted from a search with google. I also searched these forums, to no avail.Note - SQLExpress had just been downloaded and installed on the server, so it wasn't being used yet. Server is Windows Server 2003. Here are the following steps I have already taken:Used SSEUTIL.EXE to verify that another database of the same name was not already attachedUninstalled & reinstalled SQLExpress multiple timesTemporarily granted 'Full Control' permissions to 'Everyone' on the site folder to verify that it was not a permissions issue.Created a very simple website, with a new database, one page - with one listbox control, and a sqldatasource. Got the exact same error. Should rule out a problem with my application.Tried various flavors of the web.config connection string.Probably other stuff that I forgot about, but will add if I remember.The only things I could imagine being wrong are either a problem with my connectionString, or the fact that SQLExpress is installed on C:, and webstuff is on D: (Wasn't able to install SqlExpress to D: for some reason)Connection String <connectionStrings> <add name="ClassAdConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ClassAd.mdf;Integrated Security=true;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings> So I have had like 12 strokes today. If anybody could help me get this fixed, I will spread tales of your awesomeness throughout the landsI have included some extra info below in case it is needed. Thanks, Adam.Entire Error An attempt to attach an auto-named database for file
D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the
same name exists, or specified file cannot be opened, or it is located
on UNC share.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
An attempt to attach an auto-named database for file
D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the
same name exists, or specified file cannot be opened, or it is located
on UNC share.
Source Error:
Line 1705: }Line 1706: ClassAd.CategoriesDataTable dataTable = new ClassAd.CategoriesDataTable();Line 1707: this.Adapter.Fill(dataTable);Line 1708: return dataTable;Line 1709: }
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs Line: 1707
Stack Trace:
[SqlException (0x80131904): An attempt to attach an auto-named database for file D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162 System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107 ClassAdTableAdapters.CategoriesTableAdapter.GetCategoriesByPropCode(String PropCode) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs:1707[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +358 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +482 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +2040 System.Web.UI.WebControls.ListControl.OnDataBinding(EventArgs e) +92 System.Web.UI.WebControls.ListControl.PerformSelect() +31 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +26 System.Web.UI.WebControls.ListBox.OnPreRender(EventArgs e) +9 System.Web.UI.Control.PreRenderRecursiveInternal() +77 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
View 1 Replies
View Related
Jul 16, 2007
This is by FAR, the most frustrating problem I have dealt with for a while.
I have a project containing a SqlExpress database that I created in Visual Studio 2005. Everything works perfectly on my development machine. However, upon copying the site up to the webserver, I get an error stating:
An attempt to attach an auto-named database for fileD:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with thesame name exists, or specified file cannot be opened, or it is locatedon UNC share
I have read almost every article/forum post that resulted from a search with google. I also searched these forums, to no avail.
Note - SQLExpress had just been downloaded and installed on the server, so it wasn't being used yet. Server is Windows Server 2003.
Here are the following steps I have already taken:
Used SSEUTIL.EXE to verify that another database of the same name was not already attached
Uninstalled & reinstalled SQLExpress multiple times
Temporarily granted 'Full Control' permissions to 'Everyone' on the site folder to verify that it was not a permissions issue.
Created a very simple website, with a new database, one page - with one listbox control, and a sqldatasource. Got the exact same error. Should rule out a problem with my application.
Tried various flavors of the web.config connection string.
Probably other stuff that I forgot about, but will add if I remember.
The only things I could imagine being wrong are either a problem with my connectionString, or the fact that SQLExpress is installed on C:, and webstuff is on D: (Wasn't able to install SqlExpress to D: for some reason)
Connection String
<connectionStrings>
<add name="ClassAdConnectionString" connectionString="Data Source=.SQLEXPRESS;
AttachDbFilename=|DataDirectory|ClassAd.mdf;Integrated Security=true;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
So I have had like 12 strokes today. If anybody could help me get this fixed, I will spread tales of your awesomeness throughout the lands
I have included some extra info below in case it is needed.
Thanks, Adam.
Entire Error
An attempt to attach an auto-named database for fileD:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with thesame name exists, or specified file cannot be opened, or it is locatedon UNC share. Description: Anunhandled exception occurred during the execution of the current webrequest. Please review the stack trace for more information about theerror and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:An attempt to attach an auto-named database for fileD:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with thesame name exists, or specified file cannot be opened, or it is locatedon UNC share.
Source Error:
Line 1705: }
Line 1706: ClassAd.CategoriesDataTable dataTable = new ClassAd.CategoriesDataTable();
Line 1707: this.Adapter.Fill(dataTable);
Line 1708: return dataTable;
Line 1709: }
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs Line: 1707
Stack Trace:
[SqlException (0x80131904): An attempt to attach an auto-named database for file D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
ClassAdTableAdapters.CategoriesTableAdapter.GetCategoriesByPropCode(String PropCode) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs:1707
[TargetInvocationException: Exception has been thrown by the target of an invocation.]
System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0
System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +358
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29
System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +482
System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +2040
System.Web.UI.WebControls.ListControl.OnDataBinding(EventArgs e) +92
System.Web.UI.WebControls.ListControl.PerformSelect() +31
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +26
System.Web.UI.WebControls.ListBox.OnPreRender(EventArgs e) +9
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
View 2 Replies
View Related
Jul 11, 2007
Hi to everyone!
Here is my problem: I have SQLEXPRESS running with Windows Authentication on a "server" PC named "ASUS1", and I need to connect from a "client" PC named "Presario1", user "Mauro", connected through a peer network (I use a cross-over cable); both PCs belongs to the same workgroup named "RMT-WORK", and they can see each others shared folders without problems.
I have installed the connectivity components + Management Studio Express on Presario1, and enabled named pipes and TCP/IP protocols; then I've got SQL Browser running. I have also added the Login "Guest" on ASUS1SQLEXPRESS.
When I start Management Studio Express on Presario1 and browse for servers I can select "ASUS1" as database engine but when I try to connect I receive "Error 40: could not open a connection to SQL Server" (same result using SQLCMD); I have tried to add on ASUS1SQLEXPRESS a user "Presario1Mauro" with "CREATE LOGIN [Presario1Mauro] FROM WINDOWS" but I receive a "Windows user not found" error...
Can anyone help me?
View 6 Replies
View Related
May 1, 2008
I am unable to start SQL service on my system after i rebooted it
following is the message that i get
SQL Service on Local Computer started and then stopped. Some service stop automatically if they have no work to do
following is the corresponding entry in event viewer
TDSSNIClient initialization failed with error 0x7e, status code 0x60.
View 8 Replies
View Related
May 28, 2008
My Server service will not start, i get a message saing consult the logs, in the error logs it says error in the model db .ldf file. However, i can not connect to the server to restore from my back ups. I get the error msg, your server may not be configured to accept remote connection. No, i dont know what im doing and my only though is to start from scratch reinstalling the server. Any help is apreciated.
View 6 Replies
View Related
Oct 15, 1999
I need to start SQL Server Agent so that I can run scheduled jobs. I am running SQL Server 7.0 with windows NT 4.0 service pack 4. When I try to start the agent I get the following error
Error 22003: StartService() returned error 5,'Access is denied'
Does anyone have an idea as to why this is happening?
Any help with this problem would be appreciated.
Thanks
Phil
View 1 Replies
View Related
Jan 12, 2004
Message logged in the SQL Server is
Failed to report the current event. Operating
system error = 31(A device attached to the system is not functioning.).
The OS has been Shutdown and Restarted again but I am not able to start the SQL Server thereafter.
Kindly Suggest
View 8 Replies
View Related
Feb 27, 2004
Hi,
I get this error message each time i try to run the vb application in visual studio .net environment.
--------------------------------------------------------------------------------
"Unable to start SQL debug session. Ensure sqldbreg2.exe and proxy/stub DLL sqldbg.dll are registered on this machine"
-------------------------------------------------------------------------------
I am running visual studio and sql server 2000 on the same machine. I have given permission to sqldebugger user to access the system32 folder and sql debugging folder. This error message is followed by
-------------------------------------------------------------------------------
Attaching the T Sql debugger to process[proj1.exe] on machine 'my machine name' failed Error code 0x80004004
------------------------------------------------------------------------------
I am running MS SQL Server 2000 on windows 2000 adv server.
what can be done to remove this error. Thaks in advance
Sivaraj.
View 1 Replies
View Related
Apr 28, 2004
Hi Gurus,
I have installed MS analysis service(OLAP) on my lap top
my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service
I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group
I tried to install the service pack 3 from Microsoft
Could you pleae guide me to start this serivice
Thanks,
View 2 Replies
View Related
Apr 2, 2015
As my sql agent is not starting due to XP's are disabled . when I ran the sp_configure with override and changed to 0 to 1 when I am starting the agent the configured value will be back to again 0 and in logs.Waiting for SQL Server to recover database 'msdb'...ODBC Error: 0, Invalid character value for cast specification [SQLSTATE 22018]
View 1 Replies
View Related
Sep 7, 2006
Hi all
When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..
Pls suggest..
Thanks in advance
View 12 Replies
View Related
Dec 11, 2007
I have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.
Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"
I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?
www.accellus.com
View 1 Replies
View Related
Jan 23, 2008
Hi,
I was unable to start SQL Browser Services (time out) after installing SQL Server 2005 Analysis Services. The configuration of the server is
1. Win 2003 R2
2. Sql Server 2000 SP4
3. Sql Server 2005
Anybody has encountered this before? Any advice will be good.
Thanks!!
View 1 Replies
View Related
Jul 22, 2007
Hello Friends
I'm running VS2005prof.+sp1, SSE Adv (with sp2) SSE ToolKit. Its been running without problems since installation (April 12.2007) Last week I ran into a problem which started off as
"An attempt to attach an auto-named database for file D:DataVBNetVisual Studio 2005ProjectSolutionsAR1403inDebuginDebugApp_DataAR1403.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
and went down hill rapidly to the point now where I can't even start it up. Here's the error log:
2007-07-21 22:51:07.55 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-07-21 22:51:07.55 Server (c) 2005 Microsoft Corporation.
2007-07-21 22:51:07.55 Server All rights reserved.
2007-07-21 22:51:07.55 Server Server process ID is 2656.
2007-07-21 22:51:07.55 Server Authentication mode is WINDOWS-ONLY.
2007-07-21 22:51:07.56 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-07-21 22:51:07.56 Server This instance of SQL Server last reported using a process ID of 304 at 7/21/2007 5:42:20 PM (local) 7/21/2007 9:42:20 PM (UTC). This is an informational message only; no user action is required.
2007-07-21 22:51:07.66 Server Registry startup parameters:
2007-07-21 22:51:07.66 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-07-21 22:51:07.66 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-07-21 22:51:07.66 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-07-21 22:51:07.75 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-07-21 22:51:07.75 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-07-21 22:51:07.86 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-07-21 22:51:08.02 Server Database mirroring has been enabled on this instance of SQL Server.
2007-07-21 22:51:08.04 spid5s Starting up database 'master'.
2007-07-21 22:51:08.70 spid5s SQL Trace ID 1 was started by login "sa".
2007-07-21 22:51:08.85 spid5s Starting up database 'mssqlsystemresource'.
2007-07-21 22:51:08.99 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-07-21 22:51:09.51 spid8s Starting up database 'model'.
2007-07-21 22:51:09.51 spid5s Server name is 'ADSSQLEXPRESS'. This is an informational message only. No user action is required.
2007-07-21 22:51:09.52 spid5s Starting up database 'msdb'.
2007-07-21 22:51:10.08 Server Error: 17190, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server FallBack certificate initialization failed with error code: 1.
2007-07-21 22:51:10.08 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-07-21 22:51:10.08 Server Error: 17826, Severity: 18, State: 3.
2007-07-21 22:51:10.08 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-21 22:51:10.08 Server Error: 17120, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-----------
I've tried following various suggestions I found on the Net, however, after 3-days it does seem as though I'm not getting anywhere. Shoud I uninstall and re-install SSE and if so is there a specific step by step step procedure I can follow. Or is there a sure fire way to fix the probelm without re-installation?
Your help is greatly appreciated.
Gary
View 4 Replies
View Related
May 7, 2015
Recently we rebuilt one of the cluster node (due to some issues with SP), where distribution agent resource or instance was running after rebuilding that node, we failed over distribution resource to that (newly built) node and after that log reader agent jobs were in suspended status. After checking the job history, we got the below error "Unable to start execution of step 2 (reason: The LogReader subsystem failed to load [see the  file for details]; The job has been suspended).  The step failed."After getting lot of search did not get exact solution which matches to the environment
View 3 Replies
View Related
Jul 25, 2007
I have a SQL 2k5 ent. 64 bit on Windows 2003 Ent x64 edition.
The sql server was running fine under localsystem account. Recently I changed the service account to a local user (part of users group in windows) and implemented permissions according to KB article 283811. (have imlpemented the same on many other sql servers without issue).
However, the SQL services are not starting up and I am seeing the following errors in the errorlog.
===================
2007-07-25 12:36:55.90 spid11s Server name is 'HBCARPROD'. This is an informational message only. No user action is required.
2007-07-25 12:36:55.90 spid13s Starting up database 'model'.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x51.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x1.
2007-07-25 12:36:55.90 Server Error: 17826, Severity: 18, State: 3.
2007-07-25 12:36:55.90 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-25 12:36:55.90 Server Error: 17120, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
====================================
I have gone through the http://blogs.msdn.com/sql_protocols but everything mentioned here seems to be there. I understand this is some permission issue. Just not able to find it out. Can anybody help?
View 5 Replies
View Related
Oct 8, 2015
SQL server 2012, I tried to start Audit log from SSMS, I received following error.
Enable failed for audit error 33222, for more information see sql Server error log .
query ss.dm_os_ring_buffers
View 8 Replies
View Related
Nov 9, 2007
I thought I would post how I got remote t-sql debugging working in my environment. Hope it might help someone.
I have two domains, DomainA and DomainB. DomainB has a one way external trust to DomainA. Dev Vista machine running VS 2005 is in DomainA logged in as user DomainAauser. SQL 2005 running on test Windows Server 2003 DC machine in DomainB under user DomainBuser. When trying to 'step into stored procedure' in VS, whether my data connection used windows authentication or sql server authentication, I would get the 'Unable to start T-SQL degbuggin...'. I could debug t-sql when I logged into the domain controller (console or rdp) and running VS on the server. I changed the SQL Server service to run under the DomainAauser account and I can now remote t-sql debug using both window authentication and sql server authentication. Hope this may help anyone that might run into this.
Regards,
RMcc
View 1 Replies
View Related
Apr 25, 2007
Hi,
When I click on SQL Server agent I get the "Unable to start service error".
It says serivce started and stopped.
Anybody having any clue on what's going wrong. Please let me know.
Regards,
HV
View 3 Replies
View Related
Jun 10, 2007
I am trying to migrate a instance , while trying to rename the server i am getting the following error.
Error: Instance name exceeds maximum length
Aborting Initialization
The instance name is 20 char long.
Please let me know if there is any workaround.
Thanks in advance.
View 3 Replies
View Related
Feb 22, 2007
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
Thanks in advance for any ideas.
View 6 Replies
View Related
Jul 27, 2006
Please help! I cannot debug CLR procs remotely. Whenever I try to start debugging in VS2005 I get the error: Unable to start T-SQL Debugging. Could not attach to SQL Server process on .... I have clr enabled set to 1 and I have Allow SQLCLR Debugging set on. But I continue to get this error. Any help would be greatly appreciated.
Thanks!
GN
View 21 Replies
View Related
Aug 21, 2007
I have an ASP.NET project that uses a ASPNETDB.MDF file. This file is attached with a SQL Server Express everytime when I run the application, include debuging session. There are two debugging modes under Visual Studio 2005, through WebDev.WebServer or IIS. Both ways worked fine with this project until yesterday. Right now, whenever I try to debug it with WebDev.WebServer, it will show me an error:
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
But if I debug it with IIS it works fine. Also, using the same machine and same installation of Visual Studio 2005 I can debug another project with WebDev.WebServer, that also uses a .mdf file (a different file). So, seems to me I jsut have problem with one mode and one project. The only thing that I did yesterday that I think may be relevant was that I reinstalled Visual Studio 2005 SP1 to fix another issue. Anyone has an idea? Thanks!
View 3 Replies
View Related
Jul 4, 2007
hi all
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent
cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
Any advise?Thanks a lot.
View 3 Replies
View Related
Apr 6, 2008
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK
Name: ReportServer1
Website: Default Web Site
ii) Report Manager Virtual Directory
Name: Reports1
Website: Default Web Site
iii) Windows Service Identity
Service name: ReportServer
Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup
Servername €“ Nameofmyserver
Database name - ReportServer1
Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
View 5 Replies
View Related
Feb 2, 2008
I'm having a 3.0 GHz machine with 512MB Ram. however when i tried to run sql server 2005. this is the result of the System Configuration Check
- WMI Service Requirement (Success)
Messages
* WMI Service Requirement
* Check Passed
- MSXML Requirement (Success)
Messages
* MSXML Requirement
* Check Passed
- Operating System Minimum Level Requirement (Success)
Messages
* Operating System Minimum Level Requirement
* Check Passed
- Operating System Service Pack Level Requirement. (Success)
Messages
* Operating System Service Pack Level Requirement.
* Check Passed
- SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
- Minimum Hardware Requirement (Warning)
Messages
* Minimum Hardware Requirement
* The current system does not meet the minimum hardware requirements for this SQL Server release. For detailed hardware and software requirements, see the readme file or SQL Server Books Online.
- IIS Feature Requirement (Warning)
Messages
* IIS Feature Requirement
* Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
- Pending Reboot Requirement (Success)
Messages
* Pending Reboot Requirement
* Check Passed
- Performance Monitor Counter Requirement (Success)
Messages
* Performance Monitor Counter Requirement
* Check Passed
- Default Installation Path Permission Requirement (Success)
Messages
* Default Installation Path Permission Requirement
* Check Passed
- Internet Explorer Requirement (Success)
Messages
* Internet Explorer Requirement
* Check Passed
- COM Plus Catalog Requirement (Success)
Messages
* COM Plus Catalog Requirement
* Check Passed
- ASP.Net Version Registration Requirement (Success)
Messages
* ASP.Net Version Registration Requirement
* Check Passed
- Minimum MDAC Version Requirement (Success)
Messages
* Minimum MDAC Version Requirement
* Check Passed
furthermore i get error 26 when trying to create new sql server database. and while doing the SQL server surface area configuration i got this message.:
SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)
------------------------------
Program Location:
at Microsoft.SqlSac.MainPanel.FormFeatures..ctor(String machineName, Form callingForm)
HOpefully somebody out there will help me...or is this problem only appearing in sql server 2005 and would it be a better decision to install SQL server 2000...or if someone can help me rectify this problem i'll be really thankful.
View 4 Replies
View Related
