Unattended Install Of SSMS/BIDS After SQL Server Express
Dec 19, 2006
Hi,
I'm currently trying to develop an unattended installation of the Client Tools to be distributed to developers workstations.
All is well on 'clean' machines, but the problems arise when an instance of SQL Server Express is already present. The install fails, and the reason isn't clear from the log files.
I know Express installs a couple of the Client Components (like Config Manager), and I believe this is what it blocking me.
Has anyone tried this scenario?
Would I be best to REMOVE the Client_Components first, and then re-install them with SSMS etc.? Or is there a better method?
I have to leave the Express Database instance untouched as I'm not responsible for its installation or maintenance.
Thanks,
Gordon.
View 1 Replies
ADVERTISEMENT
Aug 15, 2006
When doing a unattended install of Microsoft SQL Server Express, I have a problem specifing the service to installed to be run under the as local system account.
I'm using: SQLACCOUNT & SQLPASSWORD parameters but it just won't work.
As default SQL Server is installed using the NETWORK SERVICE account, this causes the database to be read-only. What I want is to specifiy in the script that the service should run under the LOCAL SYSTEM account instead. This must also be OS-language independent.
I've tried:
SQLACCOUNT=NT AUTHORITYSYSTEM
SQLACCOUNT=NT AUTHORITYLOCAL SYSTEM
SQLACCOUNT=NT AUTHORITYLOCAL SERVICE
SQLACCOUNT=SYSTEM
SQLACCOUNT=BUILT-INSYSTEM
etc.
and even some different SID as:
S-1-5-18
S-1-5-19
All with no password with the SQLPASSWORD parameter:
SQLPASSWORD=
I still getting the same error while validating the service account.
Is there someone else who knows what I'm doing wrong?
Best regards,
Mattias
View 5 Replies
View Related
May 2, 2008
Hi,
I have a script that performs an unattended installation of SQL Server and works fine.
However, if I un-install via the control panel all the files are removed apart from the databases that are created by me when SQl server was installed. This is good and ensures data is not deleted.
The files left over are in the following directory:
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData
and contains:
MyDatabase.mdf
MyDatabase_log.LDF
The problem I have is after performing the re-installtion of SQL server (unattended) I am unable to create a new database with the same name (in this instance called "myDatabase").
The actual files are physically there so this is the reason a new database with the same name cannot be creacted.
Again this is ok again because it ensures I cannot overwrite existing data. However I am unable to re-attach this database to SQl server so I can continue to use it!
The question is:
How do I make this database usable again after an unattended install? Is there a parameter I am missing?
Below are the commands I use that are passed to the installation of SQL Server as command line parameters:
#define SQL_SILENT "-q /passive /norebootchk /qn reboot=ReallySuppress"
#define SQL_USERNAME "username=MyUserName"
#define SQL_COMPANYNAME "companyname=MyCompanyName"
#define SQL_ADDLOCAL "addlocal=ALL"
#define SQL_DISABLENETWORKPROTOCOLS "disablenetworkprotocols=0"
#define SQL_INSTANCENAME "instancename=MSSQLSERVER"
#define SQL_SQLAUTOSTART "SQLAUTOSTART=1"
#define SQL_SECURITYMODE "SECURITYMODE=SQL"
#define SQL_SAPWD "SAPWD=#Password#"
#define SQL_SAVESYSDB "1"
#define SQL_USESYSDB ""
#define SQL_INSTALLSQLDIR ""
#define SQL_INSTALLDATADIR ""
#define SQL_PARAMETERS SQL_SILENT + " " + SQL_USERNAME + " " + SQL_COMPANYNAME + " " + SQL_ADDLOCAL + " " + SQL_DISABLENETWORKPROTOCOLS + " " + SQL_INSTANCENAME + " " + SQL_USESYSDB + " " + SQL_INSTALLSQLDIR + " " + SQL_INSTALLDATADIR + " " + SQL_SAVESYSDB + " " + SQL_SQLAUTOSTART + " " + SQL_SECURITYMODE + " " + SQL_SAPWD
The last four commands I have played around with but for some reason SQL Server service will not start when these are used! (This is a different issue though!).
Any advice would be gratefully accepted.
Thanks
Paul
View 3 Replies
View Related
Oct 13, 2007
Good afternoon,
I have written a .NET app that kicks off an unattended install of SQL Server Express Advanced. After the install, the same app tries to connect to SQL Express adn run a script that creates a database plus a few other things.
However, the problem I am having is that my app cannot connect. I get the error:
"An error has occurrred while establishing a connection to the server. This failure may be casued by the fact that under the default settings SQL Server does not allow remote connections."
However, the unattended install goes great. No problems there. I know this because I can Open SSMS, run queries, created DB's, etc. I also know that it is not the remote connections issue because the unattended install is set to allow remote connections (both names pipes and TCP/IP).
So, why can't i connect? I don't need to reboot after the install do I? Please tell me i don't...and please tell me it is something simple I am overlooking.
Thanks...
View 3 Replies
View Related
Jul 6, 2006
Hi there,
I am trying to create an un-attended SQL 2005 Express install. I have successfully made my own template.ini file to install SQL the way I like but I cannot find a way to make it install with the "Ad hox remote queries" option enabled.
Is there anyway to do this? I can't seem to find any switches in the INI file to allow this.
Thanks
Joseph Beckett
View 7 Replies
View Related
Jan 17, 2008
Hello All, I am trying the following script to upgrade SQL Server 2005 SP1 to SP2. I have an Active Passive cluster configuration. I have default instances of SQL Server. I am using the following script.
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /allinstances /quiet.
The sql server install fails to run. When I used the above command with just
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /quiet still the summary.txt file came with authentication success and that is all. I changed the above script and did
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /instancename=instancename of the cluster
This worked, however the install patched the passive node (DB engine, all the cluster unaware components) but failed to patch the DB engine on the Active node. I had to run the SQL Server sp2 install manually but still it did not patch the DB engine on the primary node
1. Can someone please help me with this issue as I want the unattended install to work. so it installs both active and passive node. I will post the final output and also the ADS script to do this as a bonus if this works.
Here is the summary.txt file.
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
msftesql Database Services Service 5152
MSSQLSERVER Database Services Service 4412
ResrcMon.exe Database Services Application SHOMSCSService 4688
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2153
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29506
Error Description : MSP Error: 29506 SQL Server Setup failed to modify security permissions on file D:Microsoft SQL ServerMSSQL.1MSSQLData for user sqlservice. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 1129
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 2004
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29506
View 1 Replies
View Related
Jan 10, 2008
The scenario I have is as follows:
Our product ships with a bootstrapper that installs SQL Server 2005 silently for our clients - basically it's a pre-req which we load for them if it's not already installed.
The bootstrapper supplies the service account identity parameters for the SQL Server install command line in English. It supplies the local system account (NT AUTHORITYSYSTEM).
The problem occurs when we tried to install the product onto a French version of XP. We got the error message "SQL Server setup could not validate the service accounts. Either the service accounts have not been provided for all the services being installed, or the specified username or password is incorrect. For each service, specify a valid username, password, and domain, or specify a built-in system account."
Having read the page http://msdn2.microsoft.com/en-us/library/ms143504.aspx#Localized_service_names we have discovered that the system account identity has a different name for French (AUTORITE NTSYSTEM) along with some other languages ... but we're not sure how to resolve the problem.
Can anyone out there tell me whether we ...
1) Can get the machine being installed on to tell us the local system account identity so we can substitute it into our command line in the bootstrapper?
2) Have to write a different bootstrapper for each language that names the local system account identity differently?
3) Have overlooked some other solution?
Also, does anyone know how many languages and which they are that give the local system account a name that's different to "NT AUTHORITYSYSTEM"??
Thanks,
Sara
<EDIT>
Sorry, omitted a vital bit of information. The bootstrapper is written in C++.
We know the .NET code to retrieve an NT account given a well known SID. Can we do the same in C++ somehow??
</EDIT>
View 3 Replies
View Related
Mar 11, 2008
Hi
Can I install just Business Intelligence Development Studio without installing SQL Server?
Thanks,
Salman Shehbaz.
View 5 Replies
View Related
Mar 30, 2007
1. Extracted SQL Server 2005 Express Service Pack 1 files to local filesystem.
2. Ran setup.exe from local filesystem.
3. Changed all installation paths to D. Specified data files go to D:Data
3. Set all services to run as Local System.
4. Did not reboot.
5. Extracted SQL Server 2005 Express Service Pack 2 files to local filesystem.
6. Attempted an unattended installation using /settings and a modified template.ini file.
7. Checked C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt which did not show any errors.
8. SELECT @@VERSION showed the version number is 9.00.2470.00, which indicates the upgrade was not actually successful.
This is what was in the modified template.ini file:
INSTANCENAME=MSSQLSERVER
INSTALLSQLDIR="D:Program FilesMicrosoft SQL Server"
UPGRADE=SQL_Engine
INSTALLSQLSHAREDDIR="D:Program FilesMicrosoft SQL Server"
ENABLERANU=0
Tried added this, which did not help:
REINSTALLMODE=vomus
Also tried adding this, which did not help, either:
INSTALLSQLDATADIR="D:Data"
What does it take to have a successful unattended upgrade of SQL Server 2005 Express from SP1 to SP2?
View 3 Replies
View Related
Mar 31, 2004
Using an unattended file (.iss) is there a way to incorporate the SP3 (or any) patch within an .iss file so that there is only only install that incorporates the patch?
View 1 Replies
View Related
Mar 23, 2007
I am trying to do an unattended install using the following commad
Setup.EXE /settings C:/setup.ini /qn
but i am getting a messaged saying
"Please go through control panel to install and configure system component"
I already have one instance of sql server installed on the server.
Please can some one help with this
View 2 Replies
View Related
Jul 19, 2006
I am trying to upgrade an MSDE 1.0 db with the Service Pack 4 patch
but I need to do either a Silent or Unattended install.
Does anyone know how to do this? Does anyone know the
command-line command to do this?
I tried using...
sql70sp4.exe -a -f1 "unattend.iss"
....but that didn't work. It popped up a window asking where I
should extract the contents of the .exe (that shouldn't be appearing
either) and then after it extracted it didn't do anything else.
Any help is greatly appreciated.
View 1 Replies
View Related
Jun 20, 2006
I'm trying to do an unattended install of the client components for SLQ2005. I have read the document on doing a install from the command prompt but when I use the "ADDLOCAL" switches I get some components that I don't require. For example, I am using the following command to run the setup - "start /wait <path>setup.exe ADDLOCAL=Client_Components,SQL_Tools90,Connectivity". When I look at the Add/Remove Programs list I can see that it has installed "MSXML 6.0 Parser", "SQL 2005 Backward Compatibilty" and "Office 2003 Web Components". The only components I require are the "SQL Support Files", "SQL Server Native Client" and " CLient Tools". If I run "start /wait <path>setup.exe REMOVE=SQLXML,TOOLS_BC_DEP" it will remove "Office 2003 Web Components" and "SQL 2005 Backward Compatibilty" but not the "MSXML 6.0 Parser". How can I get rid of this?
Thanks for any help.
View 1 Replies
View Related
Jul 24, 2006
I've looked through every source of material on SQL Server Express unattended installs that I could get my hands on, but so far, I've come up with nothing that shows how to set the server engine's TCP port to 1433.
Since the SQL Server setup is part of a (considerably) larger install, requiring the customer to set this by hand is not really acceptable.
Is there a way to do this with a command-line parameter (etc)?
Thanks in advance
Josh
View 6 Replies
View Related
Mar 6, 2008
Hello SQL Knowledgeable Crowd,
I'm trying to install SQL Server 2005 from the command line without using an .ini file and without having IIS installed. I know that I need to pass all the parmeters and I think I have them all.
My .bat file will install when IIS is installed, but I can not get it to install without IIS. The GUI gives me a warning and allows me to ignore this, but I can't figure out the switch that will do the same thing.
Can someone please point out my mistakes.
Here are my command line parameters:
(Win 2k3 x64, SQL2005 Enterprise)
"P:SoftwareMicrosoftSQL Server 200564-bitEnterpriseCD1setup.exe" /qn
INSTANCENAME="MSSQLSERVER" ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_FullText,Notification_Services,NS_Engine,NS_Client,SQL_DTS,Client_Components,Connectivity,SQL_Tools90,SDK,SQL_Documentation,SQL_BooksOnline,SQL_Samples,SQL_AdventureWorksSamples,SQL_AdventureWorksDWSamples,SQL_AnalysisServiceSamples,SQL_Samples
PIDKEY=
SAPWD="NT AUTHORITY"
SQLACCOUNT="NT AUTHORITY"
AGTACCOUNT="NT AUTHORITY"
RSACCOUNT="NT AUTHORITY"
SQLBROWSERACCOUNT="NT AUTHORITY"
SQLAUTOSTART=1
AGTAUTOSTART=1
ASAUTOSTART=1
RSAUTOSTART=1
View 2 Replies
View Related
Nov 28, 2006
Hi!
I'm trying to do the following in a batch-file:
1) Install SQLExpress unattended providing settings in an .ini-file
2) Run an osql-command which creates a database and some tables etc.
My batch-script looks like the following:
REM Install SQLExpress
start /wait .SQLExpresssetup.exe /qb /settings %CD%mysettings.ini
osql -S (local)MyExpress -U sa -P passwd -i .createdb.sql
...
The problem is that the SQLExpress setup updates the %PATH%, but the change is not visible in my cmd-context . So, the osql-command fails.
It seems like I have to start a new cmd-window from the windows shell to get the updated environment.
Is there any way to make the environment changes visible to my script?
This might be more a sort of general batch-programming topic, but any help is appreciated. :)
Regards,
Sigurd Ringbakken
View 4 Replies
View Related
Oct 19, 2007
Hi All,
I am having an issue with SQL 2005 unattended install, I cannot see where in the template.ini file you can specify the TCP port number for SQL 2005 to listen to I want to change it to a specific port number, I know you can do this in an unattended install on SQL 2000.
Also in an unattended install of SQL 2000 and 2005 is there any way you can specify the database and transaction logs location for new databases to be installed on another drive then the system databases. I know you can change this later in SQL server properties but I wanted this to be done during the install or is there a T-SQL script which can do this after?
Any help on this will be great.
Cheers
Raxso
View 3 Replies
View Related
Mar 15, 2007
I'm able to install SQL 2005 Express using a template.ini, and use the option DISABLENETWORKPROTOCOLS=2 in order to enable TCP/IP. However, I then manually need to open SQL Server Config Manager > SQL Network Config > Protocols for SQL > TCP/IP > "IP Addresses" tab > change all "enabled" options to "yes".
Is there an automated way to do this?
Thanks,
James
View 1 Replies
View Related
May 6, 2008
After re-installing SQL Server Express 2005 and the Toolkit BIDS will not launch. Windows is looking for a file devenv.exe. Does anyone know how to get around this problem?
View 5 Replies
View Related
May 2, 2008
Hi all,
I have installed Sql server 2005 enterprise edition with the All the BI services (SSIS,SSAS,SSRS) . when i try to Install the Tools Like BIDS,documentation,sample databses. I am getting the error that foolowing compentes are already installed on the machine though they are not installed
Error message :None of the selected features can be installed or upgraded.Setup cannot Proceed since no effective change
is made to the machine.To continue,Click Back And then select features to install.To Exit SQL Server Setup,click cancel
I have installed vs2008 on my system
Kindly help
View 8 Replies
View Related
Apr 22, 2008
Hello,
On a windows 2003 server R2 x64, i had the Framework.net 3.5, Sql Server 2005 express (instance s423553 on NT SERVICENetwork) and Visual Web Developper 2008.
I installed Sql Server Express 2008 Express (install .SQLexpress with the local account sqlserv10). The first time (with the account NTSERVICENetwork), it failed. I uninstalled it and Sql Server Management Studio 2005. The second time, the install end properly. But, can't find SSMS. On a MsSql2008 microsoft page, i've found a link for SSMS 2005. So i installed it.
But, on this server, Sql Server Management Studio Express 2005 does not work with Sql Server 2008. I tried to use the 2008 Instance with Visual Web Developper 2008 but it didn't work (only compatible with sql server 2000, 2005....).
Could you help me please ?
Thank you.
View 1 Replies
View Related
Sep 17, 2007
I have a Windows XP PC that we are trying to install SQL Tools on. When I install I get an error message that says 'cannot find one or more components'. When I finish the install, everything works except Buisiness Intelligence Development Studio, which is the product we will use the most. We do not have Visual Studio.Net or any of those product on this PC.
We have tried uninstalling and reintalling. We have tried both the Enterprise and Development CDs to get the tools installed. Both give us this error.
Any ideas?
View 3 Replies
View Related
Jan 7, 2008
Hi There
I am doing an unattended upgrade of Sql Express with Advanced Services SP1.
Before the upgrade the services run under domain accounts.
I use the following command :
start /wait setup UPGRADE=SQL_Engine INSTANCENAME=MSSQLSERVER SQLACCOUNT=DOMAINUser SQLPASSWORD=p@ssw0rd ADDLOCAL=Client_Components,SQL_SSMSEE /qn
However after the ugrade the service accounts are running under local system.
Documentation is unclear, i find the following:
; The services for SQL Server and Analysis Server are set auto start. To use the *ACCOUNT settings
; make sure to specify the DOMAIN, e.g. SQLACCOUNT=DOMAINNAMEACCOUNT
; NOTE: When installing SQL_Engine 3 accounts are REQUIRED: SQLACCOUNT, AGTACCOUNT and SQLBROWSERACCOUNT.
; SQLACCOUNT Examples:
; SQLACCOUNT=<domainuser>
; SQLACCOUNT="NT AUTHORITYSYSTEM"
; SQLACCOUNT="NT AUTHORITYNETWORK SERVICE"
; SQLACCOUNT="NT AUTHORITYLOCAL SERVICE"
To my knowledge the <> is not required.
Can someone please help as i cannot get the services accounts to run under a domain user after upgrade.
Thanx
View 1 Replies
View Related
Oct 5, 2007
We're trying to upgrade to SQL Server 2005 (from 2000), but we're having consistent problems getting BIDS to install correctly.
The BIDS installation has failed on four of seven machines we've tried installing the SQL Server 2005 tools on. Not very good odds. Note that the rest of the SQL Server tools installed correctly; only BIDS is hosed. Two of the three machines where BIDS installed correctly were fresh Window's XP installs; one, however, wasn't a fresh install, so it's a mild enigma.
On the other four machines we've had the following issues with BIDS:
the shortcut created in the Start menu tries to load 'devenv.exe', but it's missing. BIDS doesn't start.
'devenv.exe' is on the system, however upon starting BIDS we're greeting with a generic pop-up that says, "Cannot find one or more components. Please reinstall the application.". Reinstalling the application does not help.
Thanks for any help or insight.
Eric
View 1 Replies
View Related
Feb 20, 2007
Yesterday, SQL Server 2005 SP2 was installed on our DEV Server (Windows 2003 SP1 x86) and now I cannot right-click a package in the Solutions Explorer window in BIDS and Execute Package. When I do, I get the following error
===================================
Object reference not set to an instance of an object. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Project.DtsPackagesFolderProjectFeature.ExecuteTaskOrPackage(ProjectItem prjItem, String taskPath)
I know I could do this yesterday morning pre SP2. I've attempted this with a couple of different packages and solutions, so it is probably not a corrupt package (unless now they are all corrupt). I can execute in debug mode if I open the package first and then hit Start Debugging. However this is not always an optimal solution because I sometimes have many connected packages and sometimes what gets executed is not what is expected.
Your thoughts would be appreciated.
View 1 Replies
View Related
May 7, 2008
Downloading and installing VS 2008 Express also created a Miscrosoft SQL Server folder. How do I install the SQL Server 2005 Express?The following is what I found from the HELP menu bar of the VS 2008 Express. Where can I find the sqlexpr.exe?
TIA,Jeffrey
To install SQL Server Express To begin installation, double-click sqlexpr.exe. Note: SQL Server Express is available as a self-extracting executable file (sqlexpr.exe) from both the Visual Studio 2005 CD and the SQL Server Express Web site. SQLEXPR.EXE installs on x86-based computers and to the 32-bit subsystem (WOW64). For more information, see Hardware and Software Requirements (SQL Server Express)
View 1 Replies
View Related
Jul 28, 2007
Hi,
I had some issues on my server and had to uninstall .Net Framework 2.0, SQL Server 2005 Express, and SQL Express Toolkit. I installed SQL Server 2005 Express and it seemed to be ok.
Then my problems all started when I tried to install SQL Express Toolkit because I needed to install DTS Wizard again, and it errors out and wouldn't let me install it. So I uninstalled everything that's listed above again.
I then tried to install SQL Server 2005 Express again, and on the second from last screen, while its listing all the components and configuring them, I get the following error as it's configuring the last component... which was the SQL Server Database Services.
TITLE: Microsoft SQL Server 2005 Setup
-----------------------------------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
I tried to re-install the SQL Server Express another 7 times wth no luck.
If anyone can point me in the right direction I'd really appreciate it.
Thanks,
Bill
View 1 Replies
View Related
Mar 8, 2008
Hi,
I'm getting an error while trying to install SQL Server Express 2005 Express Edition. I'm attaching the log of the installation process here. Please throw some light on the same.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlShutDownRANUInstance
PerfTime Start: Do_sqlShutDownRANUInstance : Sat Mar 08 21:39:12 2008
<Func Name='Do_sqlShutDownRANUInstance'>
Service SQLEXPRESS with parameters '' is being started at Sat Mar 08 21:39:12 2008
Unable to start service (3)
Error Code: 0x80070003 (3)
Windows Error Text: The system cannot find the path specified.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls:ervice:tart
Source Line Number: 316
---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (D0!64) [21:39:17:257]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
View 4 Replies
View Related
Nov 12, 2007
Hi all,
I downloaded the SSEUtilSetup.EXE and extracted the SSEUtil.exe to a folder of C:drive of my PC that is Windows XP Pro. I plan to learn the CLR programming via user-instance of SQL Server Express. I need to have SQL Server Express Utility installed. Please help and tell me how I can install SSEUtil.exe in my PC and how I use it to interact with SQL Server Express.
Thanks,
Scott Chang
View 2 Replies
View Related
May 7, 2008
I installed VS 2008 Express with an option to download SQL Server 2005 Express. I noticed there is a '90' folder under my Microsoft SQL Server folder. I assumed this the folder for SQL Server 2005 Express.
How do I set up my SQL Server2005 Express, so that I can use some sample databases for my VS 2008 Express? Any difference for SQL Server 2005 Express between VS 2008 Expressdownload and SQL Server 2005 Express download?
TIA,Jeffrey
View 3 Replies
View Related
Aug 11, 2015
trying to run ssms.msi failed with code 29506....then i am trying to use command line but i do not know how to do this.
View 4 Replies
View Related
Aug 31, 2006
I'm sorry but I am so frustrated from searching and trying things! I can't understand why this can't be resolved much easier.............anyway
I am trying to use BIDS on sql server express 2005 after attempting to install the tool kit a couple of times on different platforms. I have installed:
1) VS 2003 (also Visual C# Express on another machine);
2) .net 1.1 and .net 2.0;
3) SQL Server 2005 Express with Advanced services and the tool kit.
The sequence of installs is as follows
1).net 1.1 was there from the beginning
2)VS 2003
3).net 2.0
4)sql server 2005 express
5) tool kit
I see BIDS in the menu but devenv.exe does not exist. I've seen several workarrounds including finding and running vs_setup.msi but those don't work for me either. I am suspecting that the BIDS install conflicts with Visual Studio in any form! If this is true, can someone list those steps to follow to uninstall/re-install the products to get this working?
Thanks in advance!!!!!
View 4 Replies
View Related
Nov 14, 2006
Hello
Can any one of u tell me isthere any SSMS when we install only SQL Express independent of SQL Server
View 6 Replies
View Related
