Undocumented Error Code !!
Jun 25, 1998I found a error that is not documented when i run a long SP.
Error 3621 its not in the books
and any one help me ???
thanks
I found a error that is not documented when i run a long SP.
Error 3621 its not in the books
and any one help me ???
thanks
Hi All
Undocumented SP's like 'Sp_Msforeachdb',.
What are all the USP's availble,how for it is safe to use SP's
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
Does anyone know where I can get information about undocumented stored procedures and extended stored procedures? I found 'xp_dirtree' and I think I've figured out how to use this one but there are others and I'd like some insight into what they do.
Sidney
Dig this....
USE Northwind
GO
CREATE TABLE ItemInformation([Description] varchar(80))
GO
INSERT INTO ItemInformation([Description])
SELECT 'CHOCOLATE CHIP‚' UNION ALL
SELECT '‚COOKIES‚' UNION ALL
SELECT '‚CROISSANTS *PLAIN*‚' UNION ALL
SELECT '‚DONUTS‚' UNION ALL
SELECT '‚DONUTS *DOZEN*‚' UNION ALL
SELECT '‚MUFFINS‚' UNION ALL
SELECT '‚BAGELS‚' UNION ALL
SELECT '‚ROLLS‚' UNION ALL
SELECT '‚CUPCAKES‚' UNION ALL
SELECT '‚CRISPIES‚' UNION ALL
SELECT '‚DANISH/SWEET ROLLS‚' UNION ALL
SELECT '‚FUDGE BROWNIES‚' UNION ALL
SELECT '‚PUFF PASTRIES/ECCLES‚' UNION ALL
SELECT '‚STICKY BUNS‚' UNION ALL
SELECT '‚TURNOVERS‚' UNION ALL
SELECT '‚BLACK & WHITE COOKIES‚' UNION ALL
SELECT '‚LINZER TARTS‚' UNION ALL
SELECT '‚SCONES/BISCUITS‚' UNION ALL
SELECT '‚SCUFFINS‚' UNION ALL
SELECT '‚SINFULL BITS‚'
GO
SELECT * FROM ItemInformation
GO
UPDATE ItemInformation
SET [Description] = REPLACE([Description],',','')
GO
SELECT [Description], LEN([Description]) FROM ItemInformation
GO
SELECT REPLACE([Description],',','')
FROM ItemInformation
SELECT REPLACE([Description],'C','')
FROM ItemInformation
SELECT CHARINDEX(',',[Description])
FROM ItemInformation
GO
DECLARE @x varchar(80)
SELECT @x = '‚COOKIES‚'
SELECT @x
SELECT REPLACE(@x,',','')
GO
DELETE FROM ItemInformation
GO
INSERT INTO ItemInformation([Description])
SELECT 'CHOCOLATE, CHIP‚' UNION ALL
SELECT 'CHOCOLATE, CHIP‚' UNION ALL
SELECT ',CHOCOLATE, CHIP‚' UNION ALL
SELECT ',CHOCOLATE, CHIP‚ ' UNION ALL
SELECT ',CHOCOLATE, CHIP‚ A' UNION ALL
SELECT ',CHOCOLATE, CHIP‚ , '
GO
SELECT REPLACE([Description],',','')
FROM ItemInformation
GO
DROP TABLE ItemInformation
GO
BIZZARO WORLD
I am trying to determine which are undocumented system procedures used to satisfy our company's security audit. Well, the nature of undocumented system procedures is it's undocumented. Hence, it's hard to find.
So, is there a way I can get a list of SQL Server documented system procedures?
I know there are a lot of undocumented system stored procedures such as xp_ntsec_enumdomains, xp_instance_regread etc, that exist on SQL Server.
Does anyone know of any good websites that contain descriptions of what these stored procedures do? In particular I know that a default installation of SQL Server 2000 leaves permission to execute many of these granted to public and I am interested in finding out what the implications of each one of these are? I have tried Googling this topic but there doesn't seem to me much or there (or what is there is in Chinese and I don't really want to click on to!)
Once again thanks for the help.
Just wondering.
View 1 Replies View RelatedSQL Server 2000
Windows 2000 Advanced Server
We recently moved our servers from one domain to another. Now, we can't grant Windows users access to any databases. We CAN create the user IDs successfully via Enterprise Manager, and get a corresponding row in MASTER..SYSXLOGINS, but can't click on the Database Access tab in the SQL Server Login Properties dialog and grant accesss to any databases. When we try to do so, we get error 15401, "Windows user or group xxx not found". The underlying call is to MASTER..SP_GRANTDBACCESS, and running that via Query Analyzer returns the same error (naturally)
Looking through the code of SP_GRANTDBACCESS, I've determined that what is failing is a call to the undocumented TSQL function GET_SID. This proc takes two parameters, the first is either G<nt group name> or U<nt user name> and the second is NULL in the call in SP_GRANTDBACCESS. If I execute
SELECT GET_SID('U<valid user>', NULL)
it returns NULL, however, if I run
SELECT SUSER_SID(<valid user>)
then I get the Windows SID of whatever valid user name I supply.
We have 3 servers in question, namely production, development and test. We noticed the problem on production. Curiously enough, development and test worked fine.
NOW THE PLOT THICKENS. If I run this query on the dev box....
SELECT SUSER_SID(<id>), GET_SID('U<id>',NULL)
...the first function returned the SID, BUT THE SECOND FUNCTION DID NOT!!! How could that be? Clearly GET_SID was working inside of SP_GRANTDBACCESS, but not as a discrete call. So I went into the master database and added code to print out the SID returned by GET_SID to the proc. Lo and behold, SP_GRANTDBACCESS promptly failed with a 15401 error. It continues to get 15401s now, even after I returned it to the original code. What gives? Now my dev box has the same error production has, and all I did was recompile SP_GRANTDBACCESS a couple of times. FWIW, I did *not* ever make any changes to SP_GRANTDBACCESS on production.
Why doesn't GET_SID() work outside of SP_GRANTDBACCESS?
Why did recompiling SP_GRANTDBACCESS break it permanently?
It almost seems like the query compiler can't correctly link a call to GET_SID to the correct function in some DLL, except I thought that the compiled code didn't survive a restart, and all TSQL procs were recompiled the first time they were called after a restart. If that's the case, then the compiler is - or at least was - producing a functioning compiled version of SP_GRANTDBACCESS after every restart.
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
View 1 Replies View RelatedHi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies View Related
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
Hi,
I just installed SQL Server 2005 on Windows Vista.
I am getting an error "An unknown error occurred in the WMI
provider. Error Code 8000000A" when connecting to a web server. The
reporting services is running. Is there any other installation that is
missing. Please help.
Hello everyone.
I am trying to install Project Server, and i'm having issues with sharepoint, and connecting to SQL:
dataserver is running sbs2003 sql2003 and analsys services.
server2 is running server2003 is to be the application server for project.
ProjectDb is the database that i have setup in sql.
username is the account that can control everything as administrer.
in Sharepoint is asks for the database server: <<dataserver>>
SQL Server database name: <<ProjectDb>>
I'm using windoes authentication and then i click ok, and get the error message.
I've also see the error message can not find the SQL Server, and access denied. Under ODBC i have installed the sql server information under System DSN.
Any help would be great.
Thanks
Everett Buel
Hi,After sending a request, I would get the possible error message.Not the code @@error, nor the exact content of sysmessages, but themessage like it could be in the log file.TIA,TSalm
View 1 Replies View Relatedmy code was working fine but i changed a few things and now i cant figure it out.
the problem is that when i click my edit button none of the items go into the listbox. i added a label to track th error and i narrowed it done to a smaller ssection. Please help
//-----------------------------------------------------------------------------
/////////////////////////////////////////////////////////////////////////////////
protected void EditButton1_Click(object sender, EventArgs e)
{
int counter = 0; //counter for inserting into array
bool Validate = checknumberValidation(TextBox1.Text.ToString());
if (Validate == false)
throw new Exception(InvalidCheckNumber + TextBox1.Text);
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//get # of checkboxes and set array size;
int x = 0;
x = SetStringArraySize(); //set x to number of checkboxes that are checked
String[] updateString = new String[x]; //create string array of size x
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//for loop that will insert update statements into array
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
if (counter == 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
if (counter > 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
counter++;
}
}
//Add items to listbox and set listbox to visible.
Panel1.Visible = true;
PanelGridView.Visible = false;
Panel2.Visible = false;
updateCount.Text = updateString.Length.ToString();
updateCheckNumber.Text = TextBox1.Text;
int q = 0;
while (q < updateString.Length)
{
ListBox1.Items.Add(updateString[q]);
q++;
}
//Label1.Text = temp.Length.ToString(); //Test print to label
}
//-----------------------------------------------------------------------------
//COMPLETE
protected int SetStringArraySize()
{
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
int count = 0;
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
count++;
}
}
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
return count;
//returns number of checkboxes that are checked
}
/////////////////////////////////////////////////////////////////////////////////
//-----------------------------------------------------------------------------
Hello, I cannot get this sql query to run:
Insert Into ProcessQueue (queued_url, que_user, dqueued, quepriority, status)
Values ('domain.com', '1000', GetDate(), '5', IF (Select Count(*)
From ProcessQueue
Where Status = '1') > 3
Then '0' Else '1') Im getting: Incorrect syntax near the keyword 'IF'.Incorrect syntax near the keyword 'Then'.Also, Is there anyway to return the value which was placed into the status column to my app for processing or do I have to open a data reader and use another select statment. Thanks!
I have a c++ app that is trying to do an update, we use ADO to SQL7. It's returning error code 3119. Has anyone seen this error before? I didn't find anything in BOL or MSDN.
Thanks,
Brian
I am getting the 207 error code and can't figure out the problem. I have a coldfusion page that is calling a stored procedure. The page allows users to sort the displayed columns and it is passing the column numbers into my stored procedure. I am using a case statement to decide which sort to use.
The error message is: Invalid column name 'SCHOOL'.
I've tried adding single and double quotes here and it worked before I added the case statment when I just type 'order by school'.
Below is some of my code:
SELECT P.NAME,
P.ASORG,
P.MAILSTOP,
P.OFCPHONE,
R.EMPLID,
SCHOOL = S.DESCR,
R.DEGREE_LEVEL,
R.DISCIPLINE,
TEAM = T.TEAM_NAME,
NAT_EVENT = NE.EVENT_NAME,
R.SCHOOL_CODE,
R.TEAM_CODE,
R.EVENT_CODE,
FROM HR_EXTRAS..RECRUITERS R,
HRWH..PS_SCHOOL_TBL S,
HRWH..PERSON P,
HR_Extras..UP_TEAMS T,
HR_Extras..UP_NATIONAL_EVENTS NE,
WHERE R.SCHOOL_CODE = S.SCHOOL_CODE
AND R.EMPLID = P.SNL_ID
AND T.TEAM_CODE = R.TEAM_CODE
AND NE.EVENT_CODE = R.EVENT_CODE
ORDER BY CASEWHEN @SORT = 1 THEN P.NAME
WHEN @SORT = 2 THEN P.ASORG
WHEN @SORT = 3 THEN SCHOOL
WHEN @SORT = 4 THEN T.TEAM_NAME
WHEN @SORT = 5 THEN NE.EVENT_NAME
END
Can anyone offer suggestions?
Error messages:
Source: mscorlib
Target Site: Void WinIOError(Int32, System.String)
Message: Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLReplDatauncServername_ADVENTUREWORKS_ADVWORKSPRODUCTTRANS20070625161637' is denied.
Stack: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, DirectorySecurity dirSecurity)
at System.IO.Directory.CreateDirectory(String path, DirectorySecurity directorySecurity)
at Microsoft.SqlServer.Replication.Utilities.CreateDirectoryWithExtendedErrorInformation(String directory)
at Microsoft.SqlServer.Replication.Snapshot.SnapshotProvider.CreateSnapshotFolders()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: mscorlib, Error number: 0)
I totally followed by tutorials of replication, repldata is new created folder
sharing for windowns accounts like shown below
repl_distribution read
repl_merge read
repl_snapshot Full control
the settting for these accounts same with security setting
any idea about this error?
many thanks
ALTER PROCEDURE copy @row int
AS
GO
DECLARE @firstName isim
DECLARE @lastName isim
DECLARE @age int
DECLARE MyCursor CURSOR FOR Select Ad,SoyAd,Yas FROM Bilgi where Row < @row
OPEN MyCursor
FETCH NEXT FROM MyCursor INTO @firstName,@lastName,@age
CREATE TABLE #tablo(
adınız nvarchar(20) NULL,
soyAdınız nvarchar(20) NULL,
Yasınız int NULL )
while(@@FETCH_STATUS = 0)
BEGIN
INSERT #tablo VALUES(@firstName,@lastName,@age)
FETCH NEXT FROM MyCursor INTO @firstName,@lastName,@age
END
CLOSE MyCursor
DEALLOCATE MyCursor
SELECT * FROM #tablo
GO
When I run the above code snippet, I encounter an error called "Server: Msg 137, Level 15, State 2, Line 5
Must declare the variable '@row'."
How can I fix it ?
HeyASP.NET 2.0 + MS Sql Server 2005 Express (that version which comes with VS2005)This code below fails. The Delete method executes a stored procedure, but somehow this SP fails. The SP shown here is a short version of the actual SP. As you see from the code below, there are no way the Delete method can know if SP executed successfully. I assume I just could have returned @@error, but that just gives an error number, and not the description of the error??.. And how should I capture exceptions like these?? How should code this SP so it report the error??Any suggestions??public override void Delete(System.Guid id, int user){ using (SqlConnection cn = new SqlConnection(this.ConnectionString)) { SqlCommand cmd = new SqlCommand("SendMessage", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.Add("@id", SqlDbType.UniqueIdentifier).Value = id; cmd.Parameters.Add("@user", SqlDbType.Int).Value = user; }}
ALTER PROCEDURE dbo.DeleteMessage @id uniqueidentifier, @user intASBEGIN UPDATE table_A set column_A = 1 WHERE Id = @id; DELETE FROM table_B WHERE Id = @id; IF (@@error = 0) COMMIT TRAN; ELSE ROLLBACK TRAN;END
"SELECT p.ProductID, p.ProductTitle FROM Product p " & _
"WHERE (p.Price > '%" & FormatCurrency(lowestPrice, 2) & "%' AND p.Price < '%" & FormatCurrency(highestPrice, 2) & "%')" & _
"ORDER BY p.ProductTitle"
I have got syntax error in this SQL coding, can someone help me? is it i write it wrongly somewhere? This SQL coding i want to retrieve from database the price range of the product (currency). please help me.. thanks alot
Error displayed on explorer:
Syntax error (missing operator) in query expression 'p.ProductID = pa.ProductID AND (pa.AttributeVal LIKE '%Realism%') UNIONSELECT p.ProductID, p.ProductTitle FROM Product p WHERE (p.Price > '%$80.00%' AND p.Price < '%$100.00%')'.
I have a user that is trying to connect to a database on a SQl 7.0 server and gets
an error 20050. Information that I have says this may be caused by the ODBC Data Source
Name being misconfigured. We checked the configuration on the client and see no problems.
The application is called Maximo and is made by MRO Software.
Anyone have any ideas ?
Hey All:
Getting Code 0 errors in ActiveX scripts within DTS & can't trap the decription(s).
I remember seeing an OLD Thread on expanding the Code 0 errors but can't find it.
RobbieD
Hello all,I use Crystal Report v9, SQL server 2000.When I try to connect to a Database via ADO, I got the following error.Login failed.Details :ADO Error Code:0x80040e4dSource:Microsoft OLE DB Provider for SQL ServerDescription:Login failed for use’xxxxxxx’SQL State: 42000Native Error:18456Is there anyone how has this problem?How can I fix this?Thanks in advance,Do.--Message posted via http://www.sqlmonster.com
View 3 Replies View Related