Unexpected Error With Microsoft ODBC For Oracle
Sep 25, 2001
Hello Guy's
I've developed some DTS packages on SQL 7.0, transfering data from SQL 7.0 to Oracle 8.1.6.
Until a few day's ago, everthing worked fine. From my client workstation I
was able to edit, test and run these DTS packs.
But then, (after installing Oracle reports) it stop working. I've
already re-installed SQL 7.0 + SP3, Oracle 8.1.6 client, NT 4.0 service pack 6,
nothing works.
I always get the message :
HResult of 0x8000405(-2147467259) returned
Unexpected error occurred, An error result was returned without an error
message
Can anybody help me on this one??
Enrico Fantinel
e.fantinel@clivet.it
View 1 Replies
ADVERTISEMENT
Sep 12, 2007
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
View 4 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
May 2, 2008
Hi everyone,
I am getting the below error when I try to access the table in 2005 database through 3rd party application from the application server.
“[Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt�
This database was restored from sqlserver 2000, so the ODBC connection in the application server first was pointing to 2000 database and now its dropped and recreated to point to the 2005 database.
I dont get this error message when I do the same action from my pc.
I google'd on this error message, and I am not sure if the driver has to be upgraded or if there is anything else that I am missing here.
Thanks much.
View 1 Replies
View Related
May 21, 2007
Hi guys
I wanna display the compname [in competencies tbl], firstname & surname [in users tbl], position level [in positions tbl] and userlevel [in compuser tbl] but i get the ff error msg
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]The column prefix 'CompUser' does not match with a table name or alias name used in the query.
My code:
SELECT compname, firstname,surname ,level AS positionlevel
FROM positions, compuser, users A, comppos
INNER JOIN Competencies
ON comppos.Compid = competencies.Compid
RIGHT JOIN Users
ON CompUser.UserID = Users.UserID
WHERE Users.UserID = '999209'
OR Users.UserID = 'helpdesk1'
OR Users.UserID = '999339'
OR Users.UserID = 'helpdesk5'
ORDER BY CompName
Pls kindly help
Noks
View 1 Replies
View Related
Oct 26, 2000
Microsoft SQL Server 6.50 - 6.50.416 (Intel X86)
Jan 23 1999 14:10:24
Copyright (c) 1988-1997 Microsoft Corporation
In a SP I generate the infor RDO in a temporate tables. When i call on ASP send this :
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
/asp/rdo/rdo_mty/automatico/rdoejecutivo.asp, line 10
View 1 Replies
View Related
Feb 16, 2004
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'
[Microsoft][ODBC SQL Server Driver][SQL Server]The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Our SQL - INSERT INTO tbl_WAAGUsage (logindate,logintime,countryname,subscriberid,ipad dress) VALUES ('2/16/2004','9:50:01 AM','Albania',62,'123456789')
Hi,
I was wondering if somebody could help me... the following error message appears when I run an asp page... I did a google search and nobody appears to have had a solution to the particular problem I have... it's completely baffling but I'm hoping it's a simple setting.
Firstly, I'm sure the coding the correct as the asp page runs on two different servers correctly. I recently got a new server and the script does not appear to work with the Date function in asp on this new server. I outputted the SQL to the browser and then ran it through the Query Analyser(QA) and guess what, it worked! But when I run the asp page the above error crops up... now when I run the SQL through QA and alter the date value in the format 'dd/mm/yyyy' the above error appears in QA.. if I've lost you at this point let me know...
The way ASP passes the Date value to my SQL DB appears to be confused and it's really confusing me as it works perfectly on two servers and not the new one... the new server runs newer versions of O/S and SQL so I'm not sure that is the case... I've changed the date settings on the server so they all three servers match each other... so I have no where else to turn... any help and pointers would be much appreciated!
Regards
Steve
View 6 Replies
View Related
Sep 19, 2006
Hi everybodyMy problem with sql server is the following one:I've got my backoffice manager application done with asp technologythat works on sql server installed on Win2000 and running on IIS5.what I've done is simply doing a backup of my db and moving the aspapplication on another server: Windows 2003 with IIS6 and sql serververs.8.Then I tried to set up everything as in the beginning on the previousmachine(Win2K), but I'm getting this error:Microsoft OLE DB Provider for SQL Server error '80004005'[DBNETLIB][ConnectionOpen (Connect()).]Server SQL inesistente o accessonegato.(translated would be "SQL Server doesn't exist or access denied")/sitowebsite/bom/login.asp, line 13....where in the line 13 is set the connection to the database:Conn.Open Application("DBsource")which should be driven by what is set inside the global.asa file:Application("DBsource")="Provider=SQLOLEDB;server=127.0.0.1;database=db_nam e;uid=db_uid;pwd=db_pwd;"Application("WS_DB_TYPE") = ( "SQLSERVER" )I tried to restore the database just not losing information and nothinghappens.I tried also to create a new user and modify the properties as itshould be from the previous settings in the db(db_owner,....etc), stillnothing.any clue is appriciated.many thanks in advance.
View 1 Replies
View Related
Jul 20, 2005
Hi guys, it's nice to join the forum. Can someone can help me?After 2 years of using a program, i suddenly got this error. I triedre-installing SQL but im still getting the message.Microsoft OLE DB Provider for ODBC Drivers error '80040e14'[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot load the DLLxplog70.dll, or one of the DLLs it references. Reason: 193(error notfound).
View 1 Replies
View Related
Jul 31, 2002
Hi,
I am writing lots of data transformation tasks using both DTS Datapump and DataDrivem query. When we are trying to write it with source as MS-SqlServer 7.0 and Destination as Oracle 8I we are getting following error with MS and Oracled OLEDBs. We have tried with variuos tables and column name or query is not a problem thouth it works good with datapump tasks and workflows:
Error:
DATA TRANSFORMATION SERVICES: Data Pump Exception Log
Package Name: Test Package
Package Description: (null)
Package ID: {D74F4313-A089-11D6-9F77-00C04FCC2603}
Package Version: {9BE4B8EB-4E5E-4E86-84CA-CFB3383C7339}
Step Name: DTSStep_DTSDataDrivenQueryTask_1
Execution Started: 7/31/2002 5:57:32 PM
Command Error in Data Driven Query:
View 1 Replies
View Related
Apr 25, 2003
Where i try to create stored procedure in sql server 2000 using query analyzer i'm getting an error
'[Microsoft][ODBC SQL Server Driver]Syntax error or access violation'
and the same stored procedure if i try after some time without any changes it gets created..
how is wrong?
View 2 Replies
View Related
Feb 18, 2004
Hi !
I'm trying to load data in sql server table with Bulk Copy Program (BCP).
I have the following errors.
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unexpected EOF encountered in BCP data-file
In my File to load i have this :
Hello1¤Hello2¤17/02/2004
TOTO1¤TOTO2¤17/02/2004
TITI1¤TITI2¤17/02/2004
My definition table is :
create table tab1
(
TABLE varchar(20) null ,
PK varchar(50) null ,
DATE datetime null
)
go
I launch bcp with this command :
bcp.exe "BASETEST.dbo.tab1" in "c: ab1.out" -c -CRAW -t¤ -m100 -Smyserver -U -P -o"c: ab1.log"
The file "table1.out" is making with a C program.
Do you have an idea ?
Thanks.
View 1 Replies
View Related
Apr 17, 2008
Hi guys! I am using SQL 2005 and I wonder why I am encountering the error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" everytime I am trying to create stored procedure with temp table and table variable.
See my code below with temp table.
Any thoughts will be appreciated!
CREATE PROCEDURE DBO.SAMPLESP
(@DETAILS AS VARCHAR(8000),
@ID AS VARCHAR(15))
AS
BEGIN TRANSACTION
CREATE TABLE DBO.#TEMPTABLE
{
ASSET VARCHAR(50)
}
DECLARE @INSTINSERT AS NVARCHAR(4000)
SET @INSTINSERT= 'INSERT INTO #TEMPTABLE(ASSET)'
SET @INSTINSERT= @INSTINSERT+ @DETAILS
EXEC sp_ExecuteSQL @INSTINSERT
INSERT INTO InstDetail
(TrackNum, ASSETID)
SELECT @ID, A.ASSE
FROM #TEMPTABLE A
DROP TABLE #TEMPTABLE
IF @@ERROR != 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR('There was an error in here', 11, 1)
RETURN
END
ELSE
COMMIT TRANSACTION
View 5 Replies
View Related
Jul 23, 2005
Hello All,I am getting the following error when attemping to open a table inSQL2kSP3a.________________________________________SQL Server Enterprise ManagerDatabase Server: Microsoft SQL ServerVersion: 08.00.0760Runtime Error: [Microsoft][ODBC SQL Server Driver]Invalid time format_________________________________________I cannot find it in sysmessages, or on the web.Any ideas about how to resolve this? And how it occured...Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jan 6, 2007
when i am running a Stored Procedures, system always returns me error message below and Stored Procedures stops. please help
Microsoft OLE DB Provider for ODBC Drivers error
'80004005'
[Microsoft][ODBC SQL Server Driver] Received an unrecognized datatype 0 from
TDS data stream
sometime it returns error messge like, TDS Buffer Length Too Large
or
Unknown token received from SQL Server
or
Protocol error in TDS stream
or
Bad token from SQL Server: Datastream processing out of sync.
or
Invalid cursor state
or
TDS Buffer Link Too Large
or
Function sequence error
Many thanks, Please help, appreciated
View 4 Replies
View Related
May 22, 2007
odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
View 7 Replies
View Related
Feb 26, 2008
Hi SQL Server Team,
In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.
Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by " ".
rc = SQLConfigDataSource(NULL, ODBC_ADD_DSN, type_of_driver, parameters);
after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.
C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm
Creating a datasource with the file name i.e Benefits Logic System Level V01 every time.
rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);
Also following error message was encountered during execution of SQLConnect command.
/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/
Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner.
rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr),
&outstrlen,SQL_DRIVER_NOPROMPT);
Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.
Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.
An early reply will be appreciated.
Cheers & Regards,
Saresh
View 1 Replies
View Related
May 13, 2007
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
View 14 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Aug 23, 2007
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
View 3 Replies
View Related
Dec 25, 2005
Hi all,I am having trouble getting linked Oracle 9 server in MS SQL Server2005 Express to work properly. My machine is running Windows XP.The Microsoft and Oracle OLE DB Providers have problems dealing withOracle's Numeric Data Type, so I decided to use Microsoft's OLE DB forODBC Provider and an Oracle ODBC source. When using the Microsoft ODBCfor Oracle Driver in my ODBC source I have inconsistent behavior.Sometimes my queries are processed properly, then other times I get thefollowing errorOLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "ODBCBEAST".I have no idea why sometimes I can connect to the linked server with noproblems andwhy other times it performs like this. I'm not changing anything aboutthe system I can think of. When I use an Oracle client (PL/SQL) I haveabsolutely no problems connecting. TNSPING returns that the connectionis good.This is unacceptable so I decided to try my luck with the Oracle 10gODBC driver. However when I use this and perform an openquery selectagainst the linked server I get back only 11 rows, when I know that thedatabase has over 100 rows (in fact when using the Microsoft ODBCdriver and it works that's what I get). I figured maybe the buffersetting needed to be raised in the ODBC configuration so I took it from64000 to 600000 (a magnitude of 10) but I still get back only 11 rows.I'm at my wit's end.Any suggestions on resolving one or the other problem would be muchappreciated.Thanks much
View 2 Replies
View Related
May 14, 2008
Hi all
This Job ran yester day fine,to day It got failed with this error
any suggestion to troubleshoot problem is appreciated.
DTSRun OnError: DTSStep_DTSTransferObjectsTask_1, Error = -2147203052 (80044814)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
Error Detail Records:
Error: 0 (0); Provider Error: 0 (0)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
DTSRun OnFinish: DTSStep_DTSTransferObjectsTask_1
DTSRun: Package execution complete.
View 3 Replies
View Related
Jun 12, 2007
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
View 3 Replies
View Related
Jul 23, 2005
Dear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy
View 10 Replies
View Related
Dec 12, 2007
Can anyone give a quick description of the meaning of this message andwhat needs to be done to get a connection.I'm running DBArtisan with SQLServer 2000 client SP4 installed.I also get the same message with MS Enterprise Manager so this iscoming out of the actual ODBC connection attempt.Thanks in advance!
View 1 Replies
View Related
Feb 14, 2007
I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:
Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528
There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?
Thanks, Jennifer
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity
The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.
View 8 Replies
View Related
Mar 28, 2007
what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)
View 1 Replies
View Related
Apr 8, 2008
Hi There,
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet
Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
Thanks
Vivek
View 5 Replies
View Related
Mar 13, 2008
First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.
I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.
Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error:
Exception Message: The underlying connection was closed: An unexpected error occurred on a receive.
InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
Here is the api call:
Code Snippet
byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null,
deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,
out usedParameters, out warnings, out streamIds);
Here are some things I've tried so far:
set the HttpRuntime ExecutionTimeout value to 3 hours on the report server
disabled http keep alives on the report server
increased the script timeout on the report server
set the report to never time out on the server
set the report timeout to several hours on the client call
Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server.
Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.
View 1 Replies
View Related
Feb 15, 2004
Hi,
Do we have Microsoft ODBC Driver for DB2?. If we do then how we can get?.
Thanks,
Ravi
View 2 Replies
View Related
Nov 17, 2006
Hi!
Today we installed our ASP.NET Application on a 64-bit server for the first time. We got the error 'Unable to find entry point named 'InterlockedIncrement' in DLL 'kernel32.dll''.
This error comes when we make a database query using Microsoft.Data.Odbc. I think it does not run on 64-bit machines.
Does anybody know something about this?
KaaN
View 2 Replies
View Related
Oct 18, 2007
I'm not able to see microsoft ole db provider for odbc drivers on sql server 2005. Anyone know which driver I should install to see it?
I'm trying to create a linked server from as400 to SS2K5.
http://www.sqlserverstudy.com
View 2 Replies
View Related
