Unexpected Results In Query
Sep 21, 2007
Hi,
I'm trying to run what I thought was a relatively straightforward query to find all entries from one table that don't appear in another table:
select * from Search_Suggestion where Suggestion not in (select distinct C106 from Search_Log)
The Search_Suggestion table contains 4060 entries and the Search_Log table contains 142,000+ distinct entries.
From running a similar query using 'in' instead of 'not in' I find that there are 3778 matches between the two tables would logic which suggest leave 282 that don't exist in the Search_Log table.
However....when I run the above query it returns no records.
I've tried changing it around and have also tried using temp tables but each time I still get no records.
Any help wouldbe greatly appreciated.
Kind regards,
Steve
View 3 Replies
ADVERTISEMENT
Sep 22, 2015
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
View 2 Replies
View Related
Sep 12, 2013
I need to query the count of an occurrence in a given period of time, so I created this query. But it does not give me any results.
SELECT TOP 1000
o.[ID]
,o.[TimeOfOrder]
,x.[StreeLine1]
FROM [SC].[dbo].[bvc_Order] o
FULL JOIN SC.dbo.xmlAddressRead x
ON o.ID= x.id
WHERE DATEDIFF(HOUR,o.[TimeOfOrder],(DATEADD(Hour, -48, GETDATE()))) < 48
GROUP BY x.[StreeLine1], o.ID, o.TimeOfOrder
HAVING COUNT(x.[StreeLine1])>1
Then I change the query slightly and I ask it to show me the ones that are going to '599 Ships Landing Way' and it gives me 356 results! The Query doesn't crash, but it doesn't give me the results I need. What did I do incorrectly?
SELECT TOP 1000
o.[ID]
,o.[TimeOfOrder]
,x.[StreeLine1]
FROM [SC].[dbo].[bvc_Order] o
FULL JOIN SC.dbo.xmlAddressRead x
ON o.ID= x.id
WHERE DATEDIFF(HOUR,o.[TimeOfOrder],(DATEADD(Hour, -48, GETDATE()))) < 48
AND x.[StreeLine1]='599 Ships Landing Way'
I use Microsoft SQL 2008
View 12 Replies
View Related
Jul 28, 2004
I have lost the reference but I read somewhere that when running DBCC DBREINDEX against a clustered index, all the secondary indexes on the table are automatically re-indexed as well. I did a test of this on a small table and it seemed to confirm this. However, now I've put this into practice, I am finding that it doesn't seem to work this way. I noticed that having run DBCC DBREINDEX against a table's clustered index (DBCC DBREINDEX ('tablename', 'clusteredIndexName', fill_factor)), the secondary indexes were not automatically re-indexed - as born out by the fact that they remained badly fragmented.
First of all, do the dba's who read this beleive it is correct that DBCC DBREINDEX run against a clustered index will automatically rebuild the secondary indexes too? If so, why wouldn't it work in all cases?
Clive
View 12 Replies
View Related
Aug 9, 2004
Normally, after I use DBCC DBREINDEX, I can be sure that Scan Density on a clustered or non-clustered index is very good - eg. 99% or 100%. However, I have one database where there are a number of indexes that are not showing any improvement in Scan Density after running DBCC DBREINDEX. In on case, a clustered index, I run it on two days in succession and Scan Density actually go worse! Can anyone give me a reason for this? Can anyone suggest how to fix it?
Clive
View 1 Replies
View Related
Jul 8, 2006
hi, hvae a little trouble with thos procedure.
When executed it always adds 2 to the value of fields Telefon and Mobil.
Can anyone help me, please
Kurt
ALTER Procedure opdaterbruger
(
@Initialer nvarchar(100),
@Mailadr nvarchar(100),
@Telefon float(8),
@PlusNet float(8),
@Mobil float(8),
@pnmobil float(8)
)
AS
UPDATE Brugere
SET Mailadresse = @Mailadr
WHERE Initialer = @Initialer
IF (@Initialer= '0') OR NOT EXISTS ( SELECT * FROM PNetlokal WHERE Bruger = @Initialer)
INSERT INTO pnetlokal ( Bruger, Kortnr, Telnr )
VALUES ( @initialer, @Plusnet, @Telefon)
ELSE
UPDATE PNetLokal
SET TelNr = @Telefon, KortNr = @PlusNet
WHERE Bruger = @Initialer
IF (@Initialer= '0') OR NOT EXISTS (SELECT * FROM PlusNet WHERE Bruger = @Initialer )
INSERT INTO plusnet (Bruger, Kortnr, Mobilnr)
VALUES (@initialer, @pnMobil, @mobil)
ELSE
UPDATE PlusNet
SET Mobilnr = @Mobil, KortNr = @pnmobil
WHERE Bruger = @Initialer
View 5 Replies
View Related
Mar 5, 2008
I'm having difficulty coming up with the right syntax for a query. Suppose I have a database containing a Stores table, an ProductInventory table, and a Customers table. The Stores table has an ID field that serves as a foreign key in both the ProductInventory table and in the Customers table. I'm trying to write a query that, for each Store record, will return the total number of records in the ProductInventory table and the total number of records in the Customers table.
The following query returns, for each store, the total number of records in the ProductInventory table:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
GROUP BY Stores.Name
The following query returns, for each store, the total number of records in the Customers table:
SELECT Stores.Name,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
I combined the two queries:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
LEFT JOIN Customers ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
When I run this last query, however, I get an "Arithmetic overflow error converting expression to data type int" error. Using COUNT_BIG instead of COUNT eliminates the error, but the numbers that are generated are astronomical in size. This indicates to me that there is a *lot* more table joining going on than I expected
What is the correct syntax to produce the desired results? I have a few other tables similar to ProductInventory and Customers; I'm hoping to extend the correct syntax so as to be able to get a comprehensive record count list for each store. Thanks for your help!
View 7 Replies
View Related
Jun 25, 2007
I am using snapshot replication to copy data from one database to another. I truncate the destination table first. The publisher and the subscriber are different databases on the same server. The data turns into 1 unrecognizable row.
Here is what the source table looks like:
displayTypeID, displayType
1, Title List Formats
2, Title Details
3, Title List Export
4, Pricing Notes
5, clone Mask 001
6, clone Mask 002
7, clone Mask 004
8, clone Mask 008
9, hide From Admin
10, not Common Attr
11, Insert Title
12, title Types
The resulting data looks like this:
DisplayType, displayTypeId
, 1660953600
I see no errors in replication and nothing in the source table looks like bad data that could cause such a malady. I see the problem on two different servers now and identified the source of the problem, the column order is reversed in the source and destination tables. The data types do not even match so I would at the very least expect an error from bcp.
View 2 Replies
View Related
Nov 25, 2014
I have a simple update statement (see example below) that when runs, I expect to see the number of records updated in the Results tab. This information shows up in the Messages tab; however, what is displayed in the Results tab is (No column name) 40. From where the 40 is being generated. I have tried restarting SSMS 2012, restarting my computer, turning NOCOUNT on and off.
"UPDATE TableA
SET Supervisor = 'A123'
WHERE PersonnelNumber = 'B456'"
View 4 Replies
View Related
May 14, 2007
Hi
I have a strange issue here.
Both the input datasets of the merge join are sorted . Everything works fine if the dataset doesn't contain speacial characters like - (hipen).
This is the sorted dataset.ASI311_3ASI311_3ASI312ASI311ASIKit1ASIKit1
Merge Joiner has to look for ASI311 and finds it in the list and everything works as expected. But if the dataset is changed to
ASI311_3ASI311_3ASI-312ASI311ASIKit1ASIKit1
Then it doesn't find the ASI311 in the above dataset ?
Only change between the two datasets is the - (hipen) which is added in one of the field. Does SSIS has a differenent precedence of the special characters than that of the Database. Both the datasets are on SQLServer.
Can anyone point out the issue here?
Thankyou
Vidya
View 4 Replies
View Related
Aug 7, 2007
We are getting unexpected results from the following update statement when it is executed on SQL Server 2005.
The strange thing is that we get duplicated values for QM_UID (although when run under SQL Server 2000 we don't get duplicated values)
Can anyone explain why this happens or suggest another way of populating this column without using a cursor or adding a temporary autoincrement column and copying the values over?
declare @NextID int;
set @NextID = 1;
update tmp set QM_UID=@NextID, @NextID = @NextID + 1;
select QM_UID, count(*) from tmp group by QM_UID having count(*) > 1 order by QM_UID
QM_UID count(*)
25 2
26 3
27 4
28 4
29 4
30 4
31 4
32 4
33 4
34 4
35 5
36 4
37 4
38 4
39 4
40 3
...
--- Script to replicate problem
-- NB: The number of rows that must be added to tmp before this problem will occur is machine dependant
-- 100000 rows is sufficient on one of our servers but another (faster) server doesn't show the error
-- at 100000 rows but does at 1000000 rows.
-- Create a table
CREATE TABLE tmp (
[QM_ADD_OP] [char](6) DEFAULT '' NOT NULL,
[QM_ADD_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_ADD_TIME] [int] DEFAULT -1 NOT NULL,
[QM_EDIT_OP] [char](6) DEFAULT '' NOT NULL,
[QM_EDIT_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_EDIT_TIME] [int] DEFAULT -1 NOT NULL,
[QM_LOCK_OP] [char](6) DEFAULT '' NOT NULL,
[QM_QUOTE_JOB] [smallint] DEFAULT 0 NOT NULL,
[QM_QUOTE_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_JOB_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_PRJ_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_NUMBER] [char](12) DEFAULT '' NOT NULL,
[QM_REV_NUM] [char](6) DEFAULT '' NOT NULL,
[QM_REV_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REV_TIME] [int] DEFAULT -1 NOT NULL,
[QM_REV_OPR] [char](6) DEFAULT '' NOT NULL,
[QM_STYLE_CODE] [char](4) DEFAULT '' NOT NULL,
[QM_REP_JOB_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_REP_COLUMN] [smallint] DEFAULT 0 NOT NULL,
[QM_REP_PART] [char](6) DEFAULT '' NOT NULL,
[QM_REP_MODEL] [smallint] DEFAULT 0 NOT NULL,
[QM_REP_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_MODEL_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_RUN_NUM] [int] DEFAULT 0 NOT NULL,
[QM_SOURCE_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_SOURCE_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_SOURCE_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_SOURCE_PART] [char](6) DEFAULT '' NOT NULL,
[QM_SOURCE_MODEL] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_ORIG_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_ORIG_PART] [char](6) DEFAULT '' NOT NULL,
[QM_COPY_JOB] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_COLUMN] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_J_PART] [char](6) DEFAULT '' NOT NULL,
[QM_COPY_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_Q_PART] [char](6) DEFAULT '' NOT NULL,
[QM_JOINT_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_QUOTE_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_JOB_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_LIVE_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_USER_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_DEL_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_IS_CONVERTED] [smallint] DEFAULT 0 NOT NULL,
[QM_PRINTED] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_RATES] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_UPDATE] [smallint] DEFAULT 0 NOT NULL,
[QM_CRED_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CRED_TIME] [int] DEFAULT -1 NOT NULL,
[QM_CRED_AMT] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_CRED_OP] [char](6) DEFAULT '' NOT NULL,
[QM_HELD] [smallint] DEFAULT 0 NOT NULL,
[QM_PROOF] [char](12) DEFAULT '' NOT NULL,
[QM_DELIV_METHOD] [char](12) DEFAULT '' NOT NULL,
[QM_ART_METHOD] [char](12) DEFAULT '' NOT NULL,
[QM_DES_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_REC_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REC_TIME] [int] DEFAULT -1 NOT NULL,
[QM_OWN_OP] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_RESP_TIME] [int] DEFAULT -1 NOT NULL,
[QM_RESP_OP] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_1] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_2] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_3] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_4] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_5] [char](6) DEFAULT '' NOT NULL,
[QM_RECONTACT] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REQ_FLAG] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_ORIG_TIME] [int] DEFAULT -1 NOT NULL,
[QM_PREF_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_PREF_TIME] [int] DEFAULT -1 NOT NULL,
[QM_LATE_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_LATE_TIME] [int] DEFAULT -1 NOT NULL,
[QM_TITLE] [char](72) DEFAULT '' NOT NULL,
[QM_DELIV_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_CLT_SPEC] [char](12) DEFAULT '' NOT NULL,
[QM_TAX_REF] [char](22) DEFAULT '' NOT NULL,
[QM_CONTACT] [char](36) DEFAULT '' NOT NULL,
[QM_PHONE] [char](22) DEFAULT '' NOT NULL,
[QM_FAX] [char](22) DEFAULT '' NOT NULL,
[QM_ORDER] [char](20) DEFAULT '' NOT NULL,
[QM_ORDER_CFM] [smallint] DEFAULT 0 NOT NULL,
[QM_ORDER_REL] [char](6) DEFAULT '' NOT NULL,
[QM_REP] [char](12) DEFAULT '' NOT NULL,
[QM_REP_1] [char](12) DEFAULT '' NOT NULL,
[QM_REP_2] [char](12) DEFAULT '' NOT NULL,
[QM_REP_3] [char](12) DEFAULT '' NOT NULL,
[QM_REP_4] [char](12) DEFAULT '' NOT NULL,
[QM_REP_5] [char](12) DEFAULT '' NOT NULL,
[QM_COORDINATOR] [char](12) DEFAULT '' NOT NULL,
[QM_PRIORITY] [smallint] DEFAULT 0 NOT NULL,
[QM_TYPE_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_GRADE] [smallint] DEFAULT 0 NOT NULL,
[QM_FIN_SIZE_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_FIN_WID] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_LEN] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_DEP] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_GUSS] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_GSM] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_ORIENT] [smallint] DEFAULT 0 NOT NULL,
[QM_PROD_CODE] [char](22) DEFAULT '' NOT NULL,
[QM_FIN_GOOD] [char](22) DEFAULT '' NOT NULL,
[QM_CUST_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_CODE_1] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_CODE_2] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_PROS] [smallint] DEFAULT 0 NOT NULL,
[QM_REQD_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REQD_TIME] [int] DEFAULT -1 NOT NULL,
[QM_FOLIO] [char](12) DEFAULT '' NOT NULL,
[QM_FOLIO_1] [char](12) DEFAULT '' NOT NULL,
[QM_FOLIO_2] [char](12) DEFAULT '' NOT NULL,
[QM_PACK_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_USAGE] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_REORDER] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_EACH_WGT] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_WGT_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_RFQ_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_RFQ_TIME] [int] DEFAULT -1 NOT NULL,
[QM_RFQ_OPR] [char](6) DEFAULT '' NOT NULL,
[QM_SALES_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_SALES_SRC] [char](12) DEFAULT '' NOT NULL,
[QM_SALES_RSN] [char](12) DEFAULT '' NOT NULL,
[QM_PROFILE] [char](12) DEFAULT '' NOT NULL,
[QM_JOB_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_PREV_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_JOB_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_PO_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_PO_TIME] [int] DEFAULT -1 NOT NULL,
[QM_PO_OP] [char](6) DEFAULT '' NOT NULL,
[QM_DLY_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_DLY_TIME] [int] DEFAULT -1 NOT NULL,
[QM_QTY_DESP] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_TOTAL_DLY] [int] DEFAULT 0 NOT NULL,
[QM_SCHED_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_SCHED_TIME] [int] DEFAULT -1 NOT NULL,
[QM_CLOSE_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CLOSE_TIME] [int] DEFAULT -1 NOT NULL,
[QM_INV_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_PACK_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_DOWN_LOAD] [smallint] DEFAULT 0 NOT NULL,
[QM_TRACK_CODE] [char](4) DEFAULT '' NOT NULL,
[QM_TAX_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_TAX_CODE] [char](6) DEFAULT '' NOT NULL,
[QM_CURR] [char](6) DEFAULT '' NOT NULL,
[QM_EXCH_RATE] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_UNIT_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_UNIT_FLAG] [smallint] DEFAULT 0 NOT NULL,
[QM_RUNON_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_SPEC_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_CHARGEABLE] [smallint] DEFAULT 0 NOT NULL,
[QM_NC_REASON] [char](22) DEFAULT '' NOT NULL,
[QM_CUST_MKUP] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_JOB_MKUP] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_BROKERAGE] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_CUST_DISC] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_INVOKED_BTNS] [int] DEFAULT 0 NOT NULL,
[QM_IMPORTED] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_RECALC] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_CONVERT] [smallint] DEFAULT 0 NOT NULL,
[QM_BRANCH] [char](6) DEFAULT '' NOT NULL,
[QM_CODE] [char](36) DEFAULT '' NOT NULL,
[QM_TEMPLATE] [smallint] DEFAULT 0 NOT NULL,
[QM_REPEAT_PERIOD] [int] DEFAULT 0 NOT NULL,
[QM_REOPEN_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CAT_OPTION] [char](16) DEFAULT '' NOT NULL,
[QM_UNIT_ID] [char](10) DEFAULT '' NOT NULL,
[QM_PROD_BRANCH] [char](6) DEFAULT '' NOT NULL,
[QM_UID] [int] DEFAULT 0 NOT NULL,
[QM_AVAIL_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_AVAIL_TIME] [int] DEFAULT -1 NOT NULL
) ON [PRIMARY]
GO
-- Create an index on the table
CREATE unique INDEX [QM_NUMBER_ORDER] ON tmp([QM_QUOTE_JOB], [QM_NUMBER]) ON [PRIMARY]
GO
-- Populate the table
declare @Counter as int
SET NOCOUNT ON
set @Counter = 1
while @Counter < 100000
begin
insert into tmp (QM_ADD_TIME, QM_NUMBER) values (1,@Counter);
set @Counter = @Counter + 1
end
GO
-- Update QM_UID to a sequential value
declare @NextID int;
set @NextID = 1;
update tmp set QM_UID=@NextID, @NextID = @NextID + 1;
-- Find rows with a duplicate QM_UID (there should be no duplicate)
select QM_UID, count(*) from tmp group by QM_UID having count(*) > 1 order by QM_UID
--drop table tmp
-- output from select @@VERSION
-- Microsoft SQL Server 2005 - 9.00.3054.00 (Intel X86) Mar 23 2007 16:28:52 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
View 4 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Feb 12, 2008
Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
View 1 Replies
View Related
Nov 26, 2007
I am running a query on a SQL Server 2005 database and encounter the following error message
"Internal Query Processor Error: The query processor encountered an unexpected error during execution."
There is a join between a table on the 2005 database and another on a 2000 database. I have run DBCC CHECKTABLE and found no errors on the two tables.
Anybody with ideas?
Thanks
View 3 Replies
View Related
May 28, 2008
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
View 4 Replies
View Related
Jul 30, 2015
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
View 13 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
Aug 2, 2012
linking two tables together to get an end result
find below the code i have used
The first part of the query provides me with the info i need
SELECT sub.*,
case when rm_sales_band = '2M to 4M' then 'Kirsty' else RM end as rm
into #rmtmp
[Code].....
View 1 Replies
View Related
Jul 10, 2015
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
View 6 Replies
View Related
Aug 22, 2005
Hi,New to .Net and SQL. I have two tables that I have joined together. RentalControl_Main has the rental informationd and an Adjuster ID that links to the ADjuster table and the adjusters name. I am trying to create a report that gives the "Single" adjuster name and the totals for all of their contracts. I have a details report that gives each contract info. for each specific adjusters rentals. However, I want to just list the adjuster once and give all of their totals. In my SQL statement I have all of it written out and just need to knowwhat to do in place of 'Alex Early' that will give me all of the distinct adjusters.Do I need to code this on the page with a do while loop?Appreciate any help.SELECT SUM(dbo.RentalControl_Main.Rate) / COUNT(dbo.RentalControl_Main.Rate) AS AmtAvg, SUM(dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.DaysBilled) AS DayAvg, SUM(dbo.RentalControl_Main.Rate * dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.Rate) AS TotAvgFROM dbo.RentalControl_Main INNER JOIN dbo.RentalControl_Adjuster ON dbo.RentalControl_Main.AdjusterID = dbo.RentalControl_Adjuster.AdjusterIDWHERE (dbo.RentalControl_Adjuster.AdjusterName = 'Alex Early' AND (dbo.RentalControl_Main.DateClose IS NOT NULL) AND (dbo.RentalControl_Main.AgencyID = '2')
View 1 Replies
View Related
Apr 20, 2004
I was wondering if there was a keyword that would allow you to return the number of results from a query such as (this is fake just giving an example so that someone can give me the real answer)
select TotalReturned
from table
where field=""
View 7 Replies
View Related
Oct 7, 1999
I am a beginner with SQL, so please excuse any ignorance here.
Under SQL 6.5, when executing a SELECT DISTINCT query against a table in a certain database, the results were returned alphabetized. Now, after migrating the database to SQL 7.0, the same query does not return the results alphabetized. If I add an index for the column specified in the query to the table, the results come back alphabetized. Is there any way to correct this other than adding indexes for all columns in all tables that are queried in this manner?
TIA,
Paige
View 2 Replies
View Related
Mar 2, 2005
I am running the same exact query in SQL 2000 and I get different results. Should I try running DBCC CHECKDB and look for errors?
View 5 Replies
View Related
Apr 30, 2008
Hi,
I have this line of code that when run in the query doesn't return anything:
srv.AGENT_S_ACC_CODE IN ('" & Replace(Replace(Parameters!arcode.Value," ",""),",","','") & "')
The parameter is setup and the query works when I hardcode it with a value but will not return anything with this, does anyone know why?
Thanks,
Rhonda
View 2 Replies
View Related
Oct 25, 2006
Hi guys, say i wrote a query that returns 1,000 records.. what kinda query could i write that only returns say the first 50 records of the 1,000 recs..
View 4 Replies
View Related
May 13, 2007
Hello,
I want to select all the customerIDs where an email address exists. Easy: select customerid from customers where emailaddress = @emailaddress
Now I want to use the resulted customerIDs from the above query as a parameter to select all the email addresses with emailstatus equal to 3.
How do I create this type of while statement in a stored procedure? I prefer to not create a temporary table.
My idea was to do it like this:
select emailaddress from emailaddresseswhere emailstatus = 3 and customerid = (select customerid from customers where emailaddress = @emailaddress)
This doesn't seems to work. I get the error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
thanks
View 4 Replies
View Related
Jul 17, 2007
I have a pretty big SQL query with a one to many sort of relationship...
There are client accounts that we're reporting on. Each account has four different historical categories attached. Each historical category can have maybe fifty entries in each, sorted by date.
I need to figure out how to grab the unique accounts and show only the three most recent results per each historical subcategory with the account... the three most current results from each of the four subcategories, displayed by the parent client account number.
I've created four views to isolate the subcategories as a start, thinking I could bring them into a parent query ...
but my question would be... how do I generate JUST the top three historical transactions by account number? If I select TOP 3, I get only the 3 newest in the MASTER LIST, not per client account, which is what I need to do.
Does this make sense? I could really use a good SQL helping hand with this one.
Thank you!
View 12 Replies
View Related
Oct 17, 2007
Can anyone give me the basics of speeding up reports that use queries or views or nested views?
Current reports are now taking over 2 minutes to show.We have thousands and sometimes even millions of records to report against.Queries have 4 and 5 table joins etc.
We are using ASP.NET 2.0 in Visual Studio 2005 and Crystal Reports.
Thanks
View 4 Replies
View Related
Sep 1, 2004
Hi,
I would like to use the result table of the first query in a number of other queries. How do I do this ?
Thanks.
View 2 Replies
View Related
Jan 4, 2006
I have a database with some over normalized tables in it. The best I can do with one query is get the file ID. In the second query I want to get all the file names, based on all the fileID's I got from the first query. How would I go about doing this?
View 5 Replies
View Related
Jan 25, 2006
I have been searching this topic on and for quite some time and can't seem to find a decent answer. Is it feasible to do your paging strictly from a SQL query? Pass the query the pagesize, what page to return and what to sort by?
View 4 Replies
View Related
May 5, 2006
ok the following statement returns the correct results in sql query analyzer but in the .net environment with c# it returns back less 3 records
SELECT SUM(ao.amount),bl.dpc,bl.city from billinglocation bl inner join shippinglocation sl on bl.billinglocationid = sl.billinglocationid inner join absorbentorder ao on sl.shippinglocationid = ao.shippinglocationid group by bl.dpc, bl.city
billinglocation 1 - 1 shippinglocation 1 - many absorbentorder
anybody have any ideas why this might be occuringthanks!
View 2 Replies
View Related
Apr 10, 2001
I am running SQL Server 7.0 on NT 4.0. I have created a simple query:
SELECT SUM(month1) As total_month1
FROM eac_manload
WHERE project_number = 8800
and dept IN (50,51,52,55,57,60,61,62,63,64,65,68,69)
I first time I run the query I get the correct result. Subsequent times that I run the query the result is 1 record with a Null value. The data has not changed. If I stop MSSQLSERVER and restart the service I get the correct result the first time and the Null value each time thereafter. Anybody out there with any idea of what is going on here? Any help will be appreciated!!
View 1 Replies
View Related
