I need to import a unicode text file with a DTS. The textfile needs to be imported width fixed column width settings as there are no field delimeters.
The data in the file is messed up (some columns are concatenated) when opened in Notepad.
The data looks fine when opened in Wordpad and also all fields are nicely delimeted but then I end up with unicode characters which are not supported in Wordpad.
I am using expressions for the textboxes in the Table control Header, because the header names should be displayed in both English as well as in Japanese based on the language selection.The report works fine and all the render formatts except CSV are working fine.when i export this report to CSV, the header names are not coming in the first row of CSV , but some other textbox names (eg textbox 34..) are being displayed on the first row of CSV.From second row onwards, i am getting the header names seperated by comma and the data is being displayed.This header names are being repeated for all the rows in the CSV along with the data.Please give me a solution regarding this.
I tried by setting Data Element as "NO" from "Auto".I could stop the header names being repeated from second row in CSV, but i couldnot get the names in the first row of CSV.
I need to have all the header names as first row in csv and from the second row, i need data.
I have a Data-Flow task embedded in a Sequence Container (does not fail component on error) on the Control Flow panel of the SSIS designer. This data flow task contains a connection to a Flat File Source -> A Data Transformation -> Into an OLE Db Destination.
The problem is that the Flat File isn't always delimited properly -> the client cannot be relied on to do this.
My question is when the delimiters are messed up, how can I capture the offending error row(s) from the Flat File Source?
What I've tried: 1) Set every column in the source flat file on error to: Redirect Row 2) Added a Script Transformation to pull the description and the record id out of the offending row 3) Added an Error file flat file destination to the end of the flow.
The package always fails on the Flat File Source and never Redirects the offending Row to the error output - I never see my onError Script Transformation go Green, Red, or Yellow - SSIS doesn't let it get there.
I'm really new to SSIS so sorry if this is a super basic question.
Here is the Error Text:
[Source - InventTable_csv [1]] Error: The column delimiter for column "RECID" was not found. [Source - InventTable_csv [1]] Error: An error occurred while processing file "C:------InventTable.csv" on data row 15228. [DTS.Pipeline] Error: The PrimeOutput method on component "Source - InventTable_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. [DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I do have the MaxErrorCount set to 1 on the Data Flow Task but still think I should see my script task execute and a log entry be generated.
Hi, i have a table with a nvarchar column,i want to send this column value as unicode content to customer mail box , but when i send it a mail with '?' customer receive , how can i accomplish this? thanks
I hope this is an OK forum for this. None jumped out at me as especially fitting.
I am getting some script files that are encoded as Unicode.
I suspect this is occurring when some people save their scripts from Query Analyzer (SS2K) or Management Studio (SS2005) but 1) I do not believe anybody is explicitly selecting Unicode and 2) I cannot duplicate this.
I often use TextPad for editing scripts. It defaults to ANSI and I never select Unicode. I have also never experienced this over many years of using TextPad. So I don't think TextPad is the issue but that is everybody else's suspicion.
In my package , I am used CDC Source transformation and received the Net changes then insert into Destination. But whatever Data coming from CDC source data type Varchar value needs to Converting Non Unicode string to Unicode string SSIS. So used Data conversion transformation to achieved this.  I need to achieve this without data conversion.
I am following the SSIS overview video- URL...I have a flat file that i want to import the contents onto a SQL database.I created a Dataflow task, source file and oledb destination.I am getting the folliwung error -"column "A" cannot convert between unicode and non-unicode string data types".in the origin file the data type is coming as string[DT_STR] and in the destination object it is coming as "Unicode string [DT_WSTR]"I used a data conversion object in between, dosent works very well
I'm connecting to a SQL Server 2005 database using the latest (beta) sql server driver (Microsoft SQL Server 2005 JDBC Driver 1.1 CTP June 2006) from within Java (Rational Application Developer).
The table in SQL Server database has collation Latin1_General_CI_AS and one of the columns is a NVARCHAR with collation Indic_General_90_CI_AS. This should be a Unicode only collation. However when storing for instance the following String:
‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_ЎўЄєÒ?Ò‘_прÑ?туф_ЂЉЊЋ ... it is saved with ? for all unicode characters as follows (when looking in the database): ‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_??????_??????_????
The above is not correct, since all unicode characters should still be visible. When inserting the same string directly into the sql server database (without using Java) the result is ok.
Also when trying to retrieve the results again it complains about the following error within Java:
Codepage 0 is not supported by the Java environment.
Hopefully somebody has an answer for this problem. When I alter the collation of the NVARCHAR column to be Latin1_General_CI_AS as well, the data can be stored and retrieved however then of course the unicode specific characters are lost and results into ? So in that case the output is as described above (ie ‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_??????_??????_????)
We would like to be able to persist and retrieve unicode characters in a SQL Server database using the correct JDBC Driver. We achieved this result already with an Oracle UTF8 database. But we need to be compliant with a SQL Server database as well. Please help.
I have an SSIS package that pulls data from a MYSQL DB (Using RSSBus for Salesforce in SSIS to accomplish this). Most of the columns are loading properly, but I have many columns that I need to convert.
I have been using the Data Conversion dataflow task in SSIS to convert the rows.
I have 2 data conversions that work on most of the columns, but the DESCRIPTION column continues to return an error saying "Cannot convert between unicode and non-unicode types", regardless of what I choose on the Data Conversion task. So, basically I want to dump this column data into a SQL table with NVARCHAR datatypes. Here is what I am doing in my SSIS package...
1) Grab subset of data from SOURCE 2) Converts to TEXTSTREAM. (Data Conversion) 3) Converts to STRING. (Data Conversion) 4) Load Destination table. (OLE DB Destination)
I have also tried to simply convert the values to STRING, but that doesn't work either.
So, I have 2 Data Conversions working here that process most of the data correctly. What I can do to load the DESCRIPTION column?
I've had some great headaches with SSIS this morning, which I have managed to get a workarounds for, but I'm not happy with them so I've come to ask for advice.
Basically, I am exporting data from an SQL Server database into an Excel spreadsheet and hitting issues with unicode and non-unicode data types.
For example, I have a column that is char(6) and have added a data conversion step to the data flow, which converts it to type DT_WSTR and then everything works!
However, this seems like a completely un-neccessary step as I should be able to do the conversion in T-SQL - but no matter what I try I keep getting the same problem.
SELECT Cast(employee_number As nvarchar(255)) As [employee_number] FROM employee WHERE forename = 'george'
ErrorValidation error. details: 1 [1123]: Column "employee_number" cannot convert between unicode and non-unicode string data types.
I know I have a solution (read: workaround) but I really don't want to do this everytime!
I have an Excel Source component hooked to an OLE DB Destination component in my SSIS 2005 Data Flow Task. After I mapped the excel columns to the OLE DB table columns i get these errors below. I noticed that for the first error, the Excel Field format (when you mouse over the column name in the mappings section in OLE DB component) is of type [DTWSTR] and the corresponding SQL field from my SQL table that it's mapping to is of type [DT_STR] when mousing over that field in the mappings in the properties of my OLE DB component. All table fields in SQL Server for the table I'm inserting into are of type varchar.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Commission Agency" and "CommissionAgency" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Column "Product" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Officer Code" and "OfficerCode" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Agency Name" and "AgencyName" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Agency Id" and "AgencyID" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Tran Code" and "TranCode" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "User Id" and "UserID" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Acct Number" and "AccountNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB Destination" (27)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
I use Visual Studio's, integration project to load XML file into SQL Server. In the XML file, i have defined collumns as string. When i try to load XML file with parts defined in scheme as string, i get an error "cannot convert between unicode and non-unicode string data type.
Destinated collumns in SQL are defined as varchar and char.
For packages that I have created to read Oracle 10g tables, that work fine with debugging in 32-bit mode, I get an error message on all string fields when I try to run in 64-bit mode. An example error message is:[OLE DB Source [1]] Error: Column "ACCT_UNIT" cannot convert between unicode and non-unicode string data types.Another interesting warning included is:[OLE DB Source [1]] Warning: The external columns for component "OLE DB Source" (1) are out of synchronization with the data source columns. The external column "ACCT_UNIT" needs to be updated.I cannot even try to convert this data with a Data Conversion item because the (red) error is on the OLE DB Source item and stops there. It doesn't matter what the destination is or even if there is a destination in the package yet.I'm using Oracle Provider for OLE DB, Oracle Client version 10.203 for 32-bit and Oracle Client 10.204 for 64-bit.Oracle is 10g on a UNIX 64-bit server and the data is not unicode.I'm using SQL Server Enterprise 2008 (10.0.1600) on Windows Server 2008 Standard SP1 on a 64-bit server.The packages work fine in 32-bit mode and the data is not unicode data. When I change Run64BitRuntime to True in the Debugging Property Page, I get the error on the OLE DB Source item. I also get the error when I schedule a package to run using the SQL Server Agent.
I have spent countless number of hours trying to solve the issue, but to no vail. My problem is SSIS throws "cannot convert between unicode and non-unicode string data types" when i am try to transform data from DB2 to SQL Server 2005. And please note, i tried all possibilities like changing the destination field which is in SQL Server 2005 to nvarchar and also text. But so far no help. And i also looked at previous posts which did not help me either.
The data file is a simple Unicode file with lines of text. BCPapparently doesn't guarantee this ordering, and neither does theimport tool. I want to be able to load the data either sequentially oradd line numbering to large Unicode file (1 million lines). I don'twant to deal with another programming language if possible and Iwonder if there's a trick in SQL Server to get this accomplished.Thanks for any help.Mark Leary----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups---= East/West-Coast Server Farms - Total Privacy via Encryption =---
I am using SQL Server Data Tools for Visual Studio 2012. I have a very simple SSIS package with a Data Flow task that exports from an OLE DB Source to a tab-delimited unicode Flat File Destination and a Bulk Insert task that loads from the file. Both the Flat File Destination and Bulk Import are using the same code page. The Bulk Insert task is using the wide char format to read from the file. The process works fine with nvarchar and int columns, but when I add a unique identifier column it fails with "type mismatch or invalid character for the specified code page".
Hi all, we are now planning to upgrade our application from anon-unicode version to a unicode version. The application's backend isa SQL Server 2000 SP3.The concern is, existing business data are stored using collation"Chinese_PRC_CI_AS", i.e. Simplified Chinese. So I thought we need toextract these data out to the new SQL Server which is using Unicode (Iassume it means converting them to nchar, nvarchar type of fields for Idon't enough information from the application side, or is there ageneral unicode collation that will make even char and varchar types tostore data as Unicode?).The problem is what's the best and most efficient way to do this dataconversion?bcp? DTS? or others?thanks a lot
I have built a large package and due to database changes (varchar to nvarchar) I need to do a data conversion of all the flat file columns I am bringing in, to a unicode data type. The way I know how to do this is via the data conversion component/task. My question is, I am looking for an easy way to "Do All Columns" and "Map all Columns" without doing every column by hand in both spots.
I need to change all the columns, can I do this in mass? More importantly once I convert all these and connect it to my data source it fails to map converted fields by name. Is there a way when using the data conversion task to still get it to map by name when connecting it to the OLE destination?
I know I can use the wizard to create the base package, but I have already built all the other components, renamed and set the data type and size on all the columns (over 300) and so I don't want to have to re-do all that work. What is the best solution?
In general I would be happy if I could get the post data conversion to map automatically to the source. But because its DataConversion.CustomerID it will not map to CustomerID field on destination. Any suggestions on the best way to do this would save me hours of work...
Hi,Consider this (light example):SELECT [template].[id], [template].[navn], [tvalues].[id]FROM template LEFT JOIN Tvalues ON [tvalues].[templateid]=[template].[id]This returns ok. But I have a clause on the Tvalues like this:WHERE [tvalues].[nr]=1;Now I dont get what I want anymore? What I mean here is:"return all records from Template and the corresponding values in TValues.If no corresponding values can be found or those where TValues.nr<>1 thenreturn NULL".Erhm...`Hope u get my meaning.../Pip
There I was merrily working away on my SSIS package, when one of our lovely network people completely wiped the drive my SQL Server database was sitting on. I was a bit miffed.
I was even more miffed when I found out after restoring the database that the package I was editing would no longer connect to it. I've removed and recreated all my datasources and connection managers and no luck.
I get a number of errors - When trying to execute a simple task to take populate a table in my SQL Server database from a remote source I get: [ODD - PMP10 in ORBIT STAGING [652]] Error: SSIS Error Code
Code SnippetDTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ORBIT STAGING" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. I can however, connect to the database in design mode, using the same connection parameters - I can create tables too, so access rights look ok.
When trying to run a for each container that uses an ADO Connection, I get:
Code SnippetError 1 Error loading Orbit Extract.dtsx: The connection "ORBIT_STAGING - ADO.NET" is not found. This error is thrown by Connections collection when the specific connection element is not found. D:DevORBITExtractOrbit Extract.dtsx Well, the connection does exist, so it must be a corrupt internal pointer or something...
If I double click on the errors, It takes me to the top of the XML file, and I'm loath to mess with this directly, as I don't know what is what here...
I did something bad (I don't recall what it was) and I can no longer log into Reporting Services. I wish I could list everything I've tried but I've been at it so long I don't remember. And I've been through the ringer of error messages.
Is there a way I can completely reset and/or restart all the settings from the original install - without doing a new install? I am afraid I am going to mess up SSAS, SSMS, SSIS and something else.
When I try to view my report manager from the computer that SSRS is installed on, I cannot do any administration on it. How can I get this back?
Here's some more info: I browse to http://localhost/reports on the machine and it only shows links for "Home", "My Subscriptions" and "Help". there are no options to add a new folder, set up security on the root folder or any admin functions.
Hi, I want to create a text file and write to text it by calling its assembly from Stored Procedure. Full Detail is given below
I write a code in class to create a text file and write text in it. 1) I creat a class in Visual Basic.Net 2005, whose code is given below: Imports System Imports System.IO Imports Microsoft.VisualBasic Imports System.Diagnostics Public Class WLog Public Shared Sub LogToTextFile(ByVal LogName As String, ByVal newMessage As String) Dim w As StreamWriter = File.AppendText(LogName) LogIt(newMessage, w) w.Close() End Sub Public Shared Sub LogIt(ByVal logMessage As String, ByVal wr As StreamWriter) wr.Write(ControlChars.CrLf & "Log Entry:") wr.WriteLine("(0) {1}", DateTime.Now.ToLongTimeString(), DateTime.Now.ToLongDateString()) wr.WriteLine(" :") wr.WriteLine(" :{0}", logMessage) wr.WriteLine("---------------------------") wr.Flush() End Sub Public Shared Sub LotToEventLog(ByVal errorMessage As String) Dim log As System.Diagnostics.EventLog = New System.Diagnostics.EventLog log.Source = "My Application" log.WriteEntry(errorMessage) End Sub End Class
2) Make & register its assembly, in SQL Server 2005. 3)Create Stored Procedure as given below:
CREATE PROCEDURE dbo.SP_LogTextFile ( @LogName nvarchar(255), @NewMessage nvarchar(255) ) AS EXTERNAL NAME [asmLog].[WriteLog.WLog].[LogToTextFile]
4) When i execute this stored procedure as Execute SP_LogTextFile 'C:Test.txt','Message1'
5) Then i got the following error Msg 6522, Level 16, State 1, Procedure SP_LogTextFile, Line 0 A .NET Framework error occurred during execution of user defined routine or aggregate 'SP_LogTextFile': System.UnauthorizedAccessException: Access to the path 'C:Test.txt' is denied. System.UnauthorizedAccessException: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, ileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append) at System.IO.File.AppendText(String path) at WriteLog.WLog.LogToTextFile(String LogName, String newMessage)
I have this #@!% installed on my machine and when it failed I made the major error of following some telephone instructions from their "help-less" support desk - - - well their $#@% products now runs again (oh whoopie) -but- nothing else related to sql server will work. This includes: Visual Developer 2005 Express - Database Explorer SQL Server Configuration Manager, Surface Area Configuration, etc., etc. (not found) I tried to re-install SQL Server -but- the install fails, fails, fails... The failures are always with a corrupt msi file that has just been downloaded / expanded - yet fails??? I have registered and sent error reports -but- I still don't have a functional sql server version running and available. I do have "their" version of SQL Server running again - this time it is named my-machine-nameGOFIGURE Like an idiot I deleted folders and un-installed sql server (as per 'their' instructions) NEVER again - if I ever get things back to "normal"
WHAT should I do - I would 'like' to continue to run their software -but- NOT at the expense of everything else.
If I have to uninstall anything - please list - thanks :)
Using SQL Server 2000 and moving to a new computer. We did a full backup ofthe existing database to tape, brought up the new computer with a cleaninstall using the same server name and IP address, and did a full restore.Not only were some permissions messed up, but Crystal Reports 10 and someAccess Data Projects refused to run. I finally discovered while running anSP_WHO that the individual database names that we'd created (meaning not'master' and the other standard tables) had several dozen blanks appendedonto the end of them. Looking at dbnames in the SP_WHO made it clear thatthis had happened, and once I knew what I was looking for it was apparent inEnterprise Manager as well when I'd select a database name in the left pane.Interestingly, VB6 applications have no trouble connecting to these tableswithout modification of the connection string. Every single CR10 report sofar has had to have it's tables relinked, and this has broken some othercode that looks at dbnames.1: How could something like this happen?2: How is it best fixed?Thanks!David
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
In SQL 2000 DTS, I was able to append data from an ODBC source to a SQL 2000 destination table. The destination table was created by copying an attached source table in Access to a new table, then upsizing it to SQL. The character fields come over as varchar, and that seemed to be fine with the DTS job.
Now using the same source table and the same SQL destination, only in SQL 2005 with Integration Services instead of DTS, I get an error because the connection manager interprets the source text fields as Unicode and the destination fields are varchar.
I could script the table and change the text fields in the destination table to nvarchar, but this could have adverse affect on the application that uses the destination table. Is there a way to make the connection manager see the source text fields as varchar, or have the integration package allow the append even though the destination is varchar and the source is nvarchar?
