I am using linked server to insert data to a table. When I do select, it does show me results but when I do insert, it does not work. My source/destination has exact same data types defined. Any idea?
insert into dbo.tb_PERSONNEL
select * from openquery(CADC1, 'SELECT PERSONNEL_1_NF.ID, PERSONNEL_1_NF.NAME, PERSONNEL_1_NF.PNUM, PERSONNEL_1_NF.PN
Hello I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake... Here's the sql management studio diagram :
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Question_SurveyTemplate". The conflict occurred in database "ankietyzacja", table "dbo.SurveyTemplate", column 'id'. The statement has been terminated. at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable) at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ? Thanks a lot.
Good afternoon SQL dudes Does anyone have any experience of extracting data from IBM's UniData (http://en.wikipedia.org/wiki/UniData) (or any post-relational Pick nested relational multi-valued relational database) into a SQL Server?More info here (http://www.rpbourret.com/xml/ProdsXMLEnabled.htm), here (http://www.pick-ware.co.uk/) and here (http://en.wikipedia.org/wiki/Pick_operating_system) I don't (which is why I am asking) but I could imagine it being a right bugger. No need for detailed or technical info - I have no more info at this stage - just wondered if anyone has any similar experience. Super duper, thank you SQL troopers :)
Greetings MSDN Experts! I am working for a company that has a large payroll database in UniData format in a program called "ScorPEO." The information from that database needs to be imported into a newer payroll SQL database program called "Millennium." Any ideas on either how to go about doing it or if there are any companies that are good at UniData to SQL conversions?
(Note: If you really want to learn more about the ScorPEO/HRPyramid program go to http://www.fwdco.com/ For more on Millennium, go to: http://www.mpay.com/ )
Hi all, We are retriving tables from DB2 and loading into a SQL server. while retriving temporary tables are getting created in the linked server. we need to delete the data in those temporary tables in Linked server. I don't know how to write delete statement for the tables in linked server. any pointers would be appreciated.
hi everybody.I have linked db2 server .Select from this server goes fine but when i do insert
case A
insert into pricing..UCIT.BOOM(A,B) VALUES(3,5) OLE DB provider 'MSDASQL' reported an error. The provider did not give any information about the error
case B SELECT * from OPENQUERY(pricing, 'insert into UCIT.BOOM(A,B) VALUES(3,5)') Server: Msg 7357, Level 16, State 2, Line 1 Could not process object 'insert into UCIT.BOOM(A,B) VALUES(3,5)'. The OLE DB provider 'MSDASQL' indicates that the object has no columns.
how to do insert into linked db2 server? I am running SQL 2000 sp2 on WIN20000 and DB2 UDB 7.2 service pack 4
Hi, I am trying to insert data from a SQL (7.0) table into an Access table but I get an error message saying the MS DTC is nor running. Apart from E.M, how can you check this. Using Query Analyzer I can select form tyhe destination table but not insert - perhaps I have missed something - acn you please help?
I have the linked server connection created and works perfectly well. I mean I am able to see the tables while I am on my database.
how do I write a SQL statement to reference the linked server ?
I tried the following:
Select top 100 * from casmpogdbspr1.MPOG_Collations.dbo.AsaClass_Cleaned
Then I get the error message....
Msg 7314, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI10" for linked server "casmpogdbspr1" does not contain the table ""MPOG_Collations"."dbo"."AsaClass_Cleaned"". The table either does not exist or the current user does not have permissions on that table.
Hey there.. I need to insert some data into a linked server where I need to insert the Identity field. When I try to turn IDENTITY INSERT on, I get this error
The object name 'Server-SQL.MyDatabase.dbo.MyTable' contains more than the maximum number of prefixes. The maximum is 2.
The line I try to execute is this... SET IDENTITY_INSERT [Server-SQL].MyDatabase.dbo.MyTable ON
From my searching around about this error, the workaround seems to be aliasing the table name, but I can't really see how to use an alias in this situation.
I have two sql servers, I have defined each one as a linked server tothe other. I can mostly access the servers from one another, but I getthe following error on a sql insert.Insert statement...INSERT INTO [U1STSV02].[Custom Log Shipping].dbo.ls_secondary_files(database_name, tl_file_name, tl_applied, lsplanid, lssecid,compression_type) VALUES ('javaweb', 'c:', 'N', 1, 1, 0)i get an error messageServer: Msg 913, Level 16, State 8, Line 1Could not find database ID 10. Database may not be activated yet or maybe in transition.I can query the table with select using the followingselect * from [u1stsv02].[custom log shipping].dbo.ls_secondary_filesand I can delete rows from the table usingdelete from [u1stsv02].[custom log shipping].dbo.ls_secondary_filesI have searched Microsoft's site and googled for a while and cannot seemto find a solution.Both servers are running SQL Server 2000 with service pack 4Thanks in advance for any replies.Steve KuekesPhysicians Pharmacy Alliancejust remove the "1", "2", "3" from my email to reach me.
hi,on localServer i execute this queryINSERT INTO table (A, B, C)SELECT A, B, C FROM LinkedServer.myDB.dbo.tableeverything is fine. But if i execute this oneINSERT INTO LinkedServer.myDB.dbo.table (A, B, C)SELECT A, B, C FROM tableit is very slow. Is there any solution to make it any faster?
Both servers running SQL 2000I have set up on our local SQL server (using Enterprise Manager) a linkedserver running on our ISP. Just did new linked server and added remotepassword and login.The following three queries work:insert into LinkedServer.dbname.dbo.Table2select *from LinkedServer.dbname.dbo.Table1select *into LocalTablefrom LinkedServer.dbname.dbo.Table1insert into LocalTableselect *from LinkedServer.dbname.dbo.Table1This query, which is what we really want to do, does not work:insert into LinkedServer.dbname.dbo.Table1select *from LocalTableand returns the error: 'The cursor does not include the table being modifiedor the table is not updatable through the cursor.'I am new to all this and would welcome some help.Adrian
Insert statement to remote server is running very slowly. I have run Profiler and find there is a 'sp_cursor' call for each row. The source system is SQL2005 and destination is SQL2000(sp4). The linked server is using 'SQL server' type connection. Source query is against a single table with a where clause. source and destination table are identical with Primary keys. Purpose is just to move the rows. Connection is a slow network connection - should be ok. I have already overcome same problem for related update and delete queries by use of 'EXECUTE (query) AT LinkedServer' that works great - but insert can not take advantage of this...
INSERT [LinkedServSQL2000sp4].dbname.schema.tablename ({column list}) Select {column list} from tablename WHERE col1 = '7/20/2006' AND col2 in (2,5,7,12,32,54,45,33)
I am trying to import unidata into SQL Server 2005 Standard Edition.
I can successfully import data into MS Access. It is simple. I just tell Access to look at the appropriate system DSN, put in the server, database name and password, and there are all the tables to choose from.
The ODBC data source is not one of my choices in the Import/Export Wizard in SSMS.
How do I use the Import/Export Wizard to import unidata?
I'm writing an insert trigger in one SQL Server database that is supposed to insert another record into a linked SQL Server database. I have the linked server set up and have been using it for a few weeks in queries and stored procedure with no problem. Now that I'm trying to use it within a trigger and it just bombs.
I'm getting the following message in one of my logs and I don't know what it means... "Failed to obtain TransactionDispenserInterface: XACT_E_TMNOTAVAILABLE". I've googled around, but can't really find anything. Any help would be appreciated.
Hei,We have 2 MS SQL SERVER 2000 installed on 2 different servers (2 separatedmachines).I am triing to connect them så that when one row is added to the table inthe database in main server - then the same row is added to the same tablein the second server database.I made the insert trigger on the table in the first server ( the secondserver is added as a linked server):-----------------------------------------------------------------------------------------create trigger ti_myTabe1 on myTable1 for insert asbegindeclare ........BEGINinsert into server2.myDatabase2.owner.myTable2(column1, column2, column3)SELECT column1, column2, column3FROM inserted insEND......end-----------------------------------------------------------------------------------------When I run the statement in "SQL Query Analyzer"on the first server:insert into Table1 values(va1,val2,val3)then error is coming:Server: Msg 7391, Level 16, State 1, Procedure ti_myTabe1 , Line 19The operation could not be performed because the OLE DB provider 'SQLOLEDB'was unable to begin a distributed transaction.[OLE/DB provider returned message: New transaction cannot enlist in thespecified transaction coordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].The straing thing is: if I run the statement in "SQL Query Analyzer"on thefirst server:insert into server2.myDatabase2.owner.myTable2 values(va1,val2,val3)then it works!But not inside the trigger!!! - What I am doing wrong ?Any idea is greatly appeciated.
I have configured a non-SQL linked server (via an OLE DB provider) and I wish to insert data into it via Service Broker but I am getting the following error in the SQL Server log: The activated proc [dbo].[sp_ mytableServiceProgram] running on queue TestDB.dbo.mytableQueue output the following: 'Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.'
As you see below, my strored proc. is not issuing any 'save trans' statements, so why is it not allowing me to wrap my code in a transaction? How else can I use a transaction (in order to not lose anything from the queue) and yet still be able to insert to the linked server?
CREATE PROC sp_mytableServiceProgram AS SET NOCOUNT ON;
-- This procedure continues to process messages in the queue until the -- queue is empty.
WHILE (1 = 1) BEGIN BEGIN TRANSACTION; --BEGIN DISTRIBUTED TRANSACTION; --Tried this but didn't help.
-- Receive the next available message WAITFOR ( RECEIVE TOP(1) -- just handle one message at a time @MessageTypeName = message_type_name, @MessageBody = message_body, @Dialog = conversation_handle FROM mytableQueue ), TIMEOUT 2000 ;
-- If RECEIVE did not return a message, roll back the transaction -- and break out of the while loop, exiting the procedure. IF (@@ROWCOUNT = 0) BEGIN ROLLBACK TRANSACTION; BREAK; END ;
SET @XML = CAST(@MessageBody AS XML);
INSERT INTO LINKEDSERVER.dbname.user.mytable SELECT tbl.rows.value('@doc_no', 'INT') AS doc_no, tbl.rows.value('@queryid', 'NVARCHAR(50)') AS queryid, tbl.rows.value('@ar_num', 'NVARCHAR(50)') AS ar_num, tbl.rows.value('@status', 'NVARCHAR(20)') AS status, tbl.rows.value('@creationtime', 'DATETIME') AS creationtime, tbl.rows.value('@note', 'NVARCHAR(250)') AS note, tbl.rows.value('@posted', 'NCHAR(1)') AS posted, tbl.rows.value('@kms', 'INT') AS kms, tbl.rows.value('@schresid', 'NVARCHAR(50)') AS schresid, tbl.rows.value('@resolution_code', 'NCHAR(8)') AS resolution_code, tbl.rows.value('@page_count', 'INT') AS page_count, tbl.rows.value('@new_serial_number', 'NVARCHAR(20)') AS new_serial_number, tbl.rows.value('@taskresolution', 'NVARCHAR(250)') AS taskresolution FROM @XML.nodes('/inserted') tbl(rows);
-- If the INSERT did not insert any rows, rollback. IF @@ROWCOUNT = 0 BEGIN ROLLBACK TRANSACTION; BREAK; END COMMIT TRANSACTION; END GO
I have the folowing problem that I could use some help with :
I have an SQL server database acting as a back end to an access dbase. The SQL srv table contains over 32 million records and I am trying to use an append query (in access) to import a further 2 million records to the SQLSRV table. The append query fails with the message 'Insert on table bcdsales failed' followed by an ODBC timeout error message. I can append one record fine but a mass import fails.
Unfortunately i can't use SQL srv to do the import (internal policy says we must stick with access front end for now).
I have a historical table on a dedicated SQL Server (let's call it the reporting db) that is populated every morning with production data that does not already exist. The data in the prod table is purged after 7 days and nothing is ever deleted from the historical table. I have set up the linked server between the two 2008 SQL Servers, but when I try to run this simple query from the reporting DB, it takes more than 5 minutes and still "executing". I eventually have to cancel it:
-- INSERT INTO Temp_Import_historical SELECT TOP 1 * FROM [192.168.1.100].ProdDB.dbo.Temp_Import_historical a WHERE NOT EXISTS (select [Temp_Import_ID] from Temp_Import_historical where a.[Temp_Import_ID] = Temp_Import_historical.[Temp_Import_ID])
I have omitted the INSERT statement on purpose, since I can't even get to output 1 row. Why this is such a resource intensive query?
I am getting error when I try Inserting data in sybase 12.5 using linked server from SQL2K5
I am able to select
Following is the code i am using.error is same for both stmts insert into l_syb_ibt.ibtqa.dbo.rajtest (id)values (1) insert openquery(l_syb_ibt, 'select id from rajtest where 1=0') values (1000)
please help.thanks in advance
following is the error OLE DB provider "MSDASQL" for linked server "l_syb_ibt" returned message "Transaction cannot have multiple recordsets with this cursor type. Change the cursor type, commit the transaction, or close one of the recordsets.". Msg 7343, Level 16, State 2, Line 1 The OLE DB provider "MSDASQL" for linked server "l_syb_ibt" could not INSERT INTO table "[l_syb_ibt].[ibtqa].[dbo].[rajtest]".
I have a 2000 machine which calls a stored procedure on another 2000 machine via a linked server. The results come back and insert into a temporary table.
When I use the same code executing the from the 2000 machine over to 2005 machine via a linked server I cannot insert into the table. But I am able to see the data if I remove the insert statement.
I have tried to place the data into a permanent table without success. I have also checked to be sure the linked server properties are the same.
Any help on this would be appreciated. Below is the code. It is very simple and returns only one value but the bigger procedure that is ran returns several records and mutliple columns. This seems to easy but doesn't work.
I get this error when trying to alter a stored procedure that has an insert statement referencing a new linked server I created:
INSERT INTO [servername].databasename.dbo.DirectReport ...
Msg 18456, Level 14, State 1, Procedure Get_Direct_Pay_Move_Data, Line 17 Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
I added Administrators and my logon to the permissions of my linked server but still get this error when it tries to save my stored proc...the one which has that insert.
I have seen in Enterprise manager there is a toll that can script the all tables in a database, but nothing that can generate the insert statements for all the rows in each table in a secified database.
Does any one know of a application, plug in, script that can generate the insert statments for all the tables in a database?
Have any seen Insert statement deadlocking itself ? Most of the articles published by Microsoft says to change the transaction isolation level from Read Committed to Read Committed Snapshot.Below is the XML file on the deadlock
What statement do I use, as part of an insert trigger, to insert xml data from the xml database to a flat file database, to check if a record with a specific ID exists to delete first then insert the changed record, instead of adding the changes or an updated from the original xml database.
What I’m trying to do is take the xml formatted data out of one sql server database and insert the data only in that xml into a another sql database. So I can play with the data.
Problem is if the data in the xml is updated or changed for a specific record on the original xml database then the trigger inserts another copy into the created database (which I don’t want).
I am having 2 tables one is staging temp and another is main import table.
In my staging table there are 3 column Col001,Id,Loaddate
in Col001 column data are present with '¯' delemeter.
I am having function which is used to load data from staging to import table using one function.
this function create a insert statement.
My Existing function
-- Description: To Split a Delimited field by a Delimiter ALTER FUNCTION [dbo].[ufn_SplitFieldByDelimiter] ( @fieldname varchar(max) ,@delimiter varchar(max) ,@delimiter_count int
[Code] ....
I am unable to get correct statement with above function.
I have two tables for insertion in one transaction scope. Table one have 10 rows. After first table insert statement (not yet committed) if I run select on first table from other session, it holds table until my insert is committed or rolled back and from (SSMS), it display 10 rows and then wait for transaction scope till finished. My question is do I need to use no lock hint in this situation. Or there is something wrong with isolation level. One saying that in this situation table should not hols select while insert is in transaction scope.
In a t-sql 2012 merge statement that is listed below, the insert statement on the merge statement listed below is not working. The update statement works though.
Merge test.dbo.LockCombination AS LKC1 USING (select LKC.lockID,LKC.seq,A.lockCombo1,A.schoolnumber from [Inputtb] A JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type
[Code] ....
Thus would you tell me what I need to do to make the insert statement work on the merge statement listed above?
Hello everybody, I'm not completly aware of the SQL server 2005 possibilities so I'd need an hints from somebody with a wide knowledge to understand the direction to take!
This is what I have to do.
I insert into a table XML message. the messages are pushed automatically by an application I have no ""control" on and I get several messages "at the same time".
Everytime the message is inserted into the database I need to trasform the XML data into the correspondent relational value and I know already that in some cases it could take a while (1 second can be considered a while..) My worry is that in the moment I process one message I loose the other one inserted after ,,,
There is some tool that helps me to handte the process as I would..
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
