Hi all,
I have a Union All transformation with 4 inputs and one output when I debug the package the sum of the different inputs rows does not match the row count in output.
I don't understand, I've used the Union All transform many times and I've never seen this.
Any idea why this could happen ?
SQL Server 2008 r2...
I have a query which does 3 selects and Union ALLs each to get a final result set. The performance is unacceptable - takes around a minute to run. If I remove the Union All so that the result sets are returned individually it returns all 3 from the query in around 6 seconds (acceptable performance).
Any way to join the result sets together without using Union All.
Each result set has exactly the same structure returned...
Query below [for reference]...
WITH cte AS (
SELECT A.[PoleID], ISNULL(B.[IsSpanClear], 0) AS [IsSpanClear], B.[SurveyDate], ROW_NUMBER() OVER (PARTITION BY A.[PoleID] ORDER BY B.[SurveyDate] DESC) rownum
FROM[UT_Pole] A
LEFT OUTER JOIN [UT_Surveyed_Pole] B ON A.[PoleID] = B.[PoleID]
[Code] .....
Why the sequence different?
select * from (
select id=3,[name]='Z'
union all select 1,'G'
union all select 2,'R'
union all select 4,'Z'
) as t
order by [name]
--result:
---------
--1 G
--2 R
--4 Z
--3 Z
select * from (
select id=3,[name]='Z'
union select 1,'G'
union all select 2,'R'
union all select 4,'Z'
) as t
order by [name]
--result:
----------
--1 G
--2 R
--3 Z--changed
--4 Z
I have 2 tables
tblOpenSiteDates
Site: int
OpenDate: smalldate
Comment: VarChar
tblCloseSiteDates
Site: int
CloseDate: smalldate
Comments: VarChar
newLocationID: int
I am trying to get a view which would display a site with the open and close dates. Null is ok for a close date for those opens that are still open.. not every office has an open date and close date.. it is possible to have just a close date and not an open date (ie unsure of open date but I know its closing)
so the output would be
viewOpenCloseSites
Site: int
opendate: smalldate
closedate: smalldate
PLEASE HELP i just can not figure it out
thanks...
Hi,Should be quite simple but can someone please tell me the best way tocount the number of rows in an UNION ALL statement.I tried using @@ROWCOUNT but that doesn't seem to contain the correctnumber.Also, I assume that running the query again but just returning count(*)instead of the data is horribly inefficient (plus the code is thenbloated.)?Thanks,Mark
View 1 Replies View RelatedI have a subscriptions table that has many line items for each record. Each line item has a different type, dues, vol, Chapt.
101 dues Mem 100
101 Vol charity 200
101 chapt CHi 300
I want my end result to have one line item per record id, but I keep coming up with an error. I am pretty sure I am close, but need assistance before I can proceed.
101 mem 100 charity 200 chi 300
Error:
Server: Msg 207, Level 16, State 3, Line 2
Invalid column name 'PRODUCT_CODE'.
Server: Msg 207, Level 16, State 1, Line 2
Invalid column name 'product_code'.
Server: Msg 207, Level 16, State 1, Line 2
Invalid column name 'product_code'.
SELECTp.ID,
p.PRODUCT_CODE as Chapt,
p.product_code as Dues,
p.product_code as Vol
from (
SELECT ID,
product_code as Chapt,
Null as dues,
Null as Vol
from subscriptions
where prod_type = 'chapt'
AND BALANCE > 0
union all
SELECT ID,
Null as chapt,
product_code as Dues,
Null as vol
from subscriptions
where prod_type = 'dues'
AND BALANCE > 0
union all
SELECT ID,
Null as chapt,
Null as dues,
product_code as Vol
from subscriptions
where prod_type = 'vol'
AND BALANCE > 0
) AS p
GROUP BY p.id
Hi,
I am using DTS to import data where the query involves the UNION .
Select a,z,y from x
UNION
select b,z,y from y;
Only the columns Z,y appearing in the output. Is there any known problem with UNION in DTS?
Thanks
Help me again . :) ..
Query :
Select 1 AS ColA, ColB,ColC
FROM Table1
Where ColA = 1
Union
Select 2 AS ColA, ColB,ColC
FROM Table1
Where ColA = 2
Expected Result.
ColA ColB ColC
1 Apple Sweet
1 Wine Alcohol
2 Home Nice
2 Travel Fun
But gives
ColA ColB ColC
1 Apple Sweet
1 Wine Alcohol
1 Home Nice
1 Travel Fun
any suggestions .please reply.
Could someone explain me Union function in MDX? How is different from the T-SQL Union?
My need is urgent.
i have a table with country names
table name:country
column name:country
it is populated with:
UK
USA
africa
asia
japan
i want a query which gives the foll output
USA
UK
africa
asia
japan
(i.e) USA and UK must be on the top 2 rows
while the rest of the countries should come below these 2 and sorted in the ascending order.
if it is possible with any other query also it is ok
Hi
I just found out that I can do an ORDER BY clause on entire records set retrieve from a query that combines several sub queries with UNION from different tables with the same structure... so this is great to know, BTW, is this a new feature of MSSQL 2K ? I don't recall being able to do this in MSSQL 7 or 6.5.
Anyway, the main question is, can I use the TOP command in a query that has UNION in it?? Meaning, there are two queries (or more) from two tables (or more) and I need to fetch the top 10 records by an ORDER BY clause from the combined results, when I try to add each sub query TOP 10 the results are not correct at all, when I try to add TOP 10 only to the first query hoping that the analyzer will refer to the whole query, it's selecting TOP 10 from the first query and combines it with all the records from the others...
So, can anyone help? I hope the problem is understood.
Thank you,
Inon.
Hi!
I am trying to join to different queries into one table ( I accomplished this)
Next I need to ADD or SUM the results of 2 rows to form a single row.
As you can see in the query below, I run 2 separate queries and use ' ' as a place holder for the UNION to work. I get duplicate rows, one with a value and the other with a '0'. I want to have a single row.
Any help is greatly appreciated!
(SELECT
v_gs_supportedpackages.ProdID0 as 'Product Name',
v_RA_System_SMSInstalledSites.SMS_Installed_Sites0 as 'Site',
Count(ProdID0) as '# copies installed',
'' as '# legitimate copies installed'
FROM
v_R_System SYS,
v_GS_Workstation_Status HWSCAN,
v_gs_SupportedPackages
inner join
v_RA_System_SMSInstalledSites on v_RA_System_SMSInstalledSites.ResourceID = v_gs_SupportedPackages.ResourceID
WHERE
SYS.ResourceId = HWSCAN.ResourceId
AND
SYS.ResourceId = v_gs_SupportedPackages.ResourceId
AND
v_gs_supportedpackages.ProdID0 = substring('MS Security Patch MS04-030,031,032,034,037,038',1,60)
GROUP BY
v_gs_supportedpackages.ProdID0,
v_RA_System_SMSInstalledSites.SMS_Installed_Sites0 )
UNION
(SELECT
v_gs_supportedpackages.ProdID0 as 'Product Name',
v_RA_System_SMSInstalledSites.SMS_Installed_Sites0 as 'Site',
'' as '# copies installed',
Count(ProdID0) as '# legitimate copies installed'
FROM
v_R_System SYS,
v_GS_Workstation_Status HWSCAN,
v_gs_SupportedPackages
inner join
v_RA_System_SMSInstalledSites on v_RA_System_SMSInstalledSites.ResourceID = v_gs_SupportedPackages.ResourceID
WHERE
SYS.ResourceId = HWSCAN.ResourceId
AND
SYS.ResourceId = v_gs_SupportedPackages.ResourceId
AND
v_gs_supportedpackages.ProdID0 = substring('MS Security Patch MS04-030,031,032,034,037,038',1,60)
AND
DateDiff(Day,HWSCAN.LastHWScan,GetDate()) <= '20'
GROUP BY
v_gs_supportedpackages.ProdID0,
v_RA_System_SMSInstalledSites.SMS_Installed_Sites0 )
Just a pet peeve....
From BOL:
By default, the UNION operator removes duplicate rows from the result set.
If you use ALL, all rows are included in the results and duplicates are not
removed.
Why is it assumed that one would want the duplicates removed by default?
Isn't that what SELECT DISINCT is for?
I was wondering if there is a way I could write this query as one query using union instead of 3 different queries?
SELECT columna as column,count(ID) as Applications
FROM tablea
GROUP columna
SELECT columna as column2, count(ID) as Approved
FROM tablesa where substring(APP_DATE,1,6) >'200304' and in 'Approved')
GROUP BY columna
SELECT columna as column3, count(ID) as Booked, sum(AMT) as amt, sum(AMT)/count(ID) as lavg
from tablea where substring(APP_DATE,1,6) >'200304' and STATUS in('book')
group by columna
Hi All,
I am doing a UNION of 8 views(with 3 million rows in each view approx). I am sure that there is NO DUPLICATE data between the views. SO specifying a UNION ALL would be better than specifying a UNION in this case?
Thanks!
Prakash.P
The secret to creativity is knowing how to hide your sources!
Hi folks,
I have a question about the performance of the following query:
(SELECT name, lastName
from Data
where salary >= 2200
)
union
(SELECT name, lastName
from Data
where salary >= 2200
) union
(SELECT name, lastName
from Data
where salary >= 2200
)
How that query works? Is it slow for a larger data? Does it do 3 queries and then combine them?
Thank you.
Hi All
I want to do the following report and I want the 2nd select statement to appear at the bottom to display the totals
SELECT Item,B.Mar, B.Apr, B.May, B.Jun,B.Jul, B.Aug, B.Sep, B.Oct, B.Nov, B.Dec, B.Jan
FROM fncWineSales(2007) AS A
UNION
SELECT 'Total',SUM(B.Mar), SUM(B.Apr), SUM(B.May), SUM(B.Jun),SUM(B.Jul), SUM(B.Aug), SUM(B.Sep), SUM(B.Oct), SUM(B.Nov), SUM(B.Dec), SUM(B.Jan)
FROM dbo.fncWineSales (2007) AS B
thanx in advance
Hello,Bear with me (not had much sleep last night), pls see following ddl,dml and comments for what is desired, I don't have a problem gettingdesired result(s), however, I'm wondering if there's another (better)solution than UNION operator in this case. TIA.-- DDLCREATE TABLE #TMP (col varchar(10));-- DMLinsert into #TMPvalues('A124');insert into #TMPvalues('A127');insert into #TMPvalues('A12728');insert into #TMPvalues('A17282');insert into #TMPvalues('BCD');insert into #TMPvalues('BCD');insert into #TMPvalues('CDSS');insert into #TMPvalues('DS');insert into #TMPvalues('YUUEI');-- goal: get one row with col data starting with 'A' and distict rowsfor the restselect top 1 colfrom #TMPwhere col LIKE 'A%'UNIONselect distinct colfrom #TMPwhere col NOT LIKE 'A%'
View 4 Replies View RelatedHi,I can return results of a union easily enough, but I wish to sum the recordsfirst. Is this possible in a single SQL statement? Or do I have to useseparate ones to sum up after the union?Cheers,Chris
View 2 Replies View RelatedWhy if run this script, Always Incorrect syntax near the keyword 'group'.
somebody helpme, how to sum the union script
SELECT NUMMSTR3, sum(qty), sum (AP)
FROM (
SELECT c.NUMMSTR3, count(*) qty,sum(a.DEBIT) DEBIT,sum(a.CRDT) CRDT,Sum(a.CRDT - a.DEBIT) AP
FROM MSTR1 a,MSTR2 b,MSTR3 c
where a.IDMSTR1 = b.IDMSTR1
and a.KDMSTR1 = c.KDMSTR3
and c.NUMMSTR3 = '21010100'
and year(b.TRXDATE) <= '2007'
group by c.NUMMSTR3
UNION ALL
SELECT c.NUMMSTR3, count(*) jml,sum(a.DEBIT) DEBIT,sum(a.CRDT) CRDT,Sum(a.CRDT - a.DEBIT) AP
FROM HISTR4 d,MSTR3 c
where d.KDHISTR4 = c.KDMSTR3
and c.NUMMSTR3 = '21010100'
group by c.NUMMSTR3
) group by NUMMSTR3
Of the two queries below, the first returns the desired result, the union of the select-except statments. Why doesn't the second query return the same result as the first? Is this a mistake/bug on Microsofts side?
select * from
(select * from TEST1
EXCEPT
select * from TEST2) AS A
UNION
select * from (select * from TEST2
EXCEPT
select * from TEST1) AS B
select * from TEST1
EXCEPT
select * from TEST2
UNION
select * from TEST2
EXCEPT
select * from TEST1
When any changes have been made to the underlying table structure, the Union all reports error and does not automatically correct the error. I then have to delete it and recreate it. Is this a bug?
View 3 Replies View Relatedhi need help
i have tow tables
no primary key
evry table only one ROW
tb1
fld1 fld2 fld3 fld4 fld5 fld6
---------------------------------------
2 4 5 6 7 8
tb2
fld1 fld2 fld3 fld4 fld5 fld6
---------------------------------------
6 1 2 4 1 9
i need to summing the tow table like this (evry table only one ROW)
view_SUM (summing)
fld1 fld2 fld3 fld4 fld5 fld6
---------------------------------------
8 5 7 10 8 17
how to do
select * from tb1
union all --------------SUM ?
select * from tb2
TNX
Hello all can anybody help me out with this one?
These are the errors that I am getting. The 2nd error only comes up when I try to put in "UNION". Any help would be very much appreciated. Thank you!
Msg 156, Level 15, State 1, Procedure searchUser, Line 79
Incorrect syntax near the keyword 'UNION'.
Msg 102, Level 15, State 1, Procedure searchUser, Line 100
Incorrect syntax near 'END'.
Code Snippet
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[searchUser]
-- Add the parameters for the stored procedure here
@Username VARCHAR(25),
@AppID INT,
@ResID INT,
@Access VARCHAR(5),
@Region INT
AS
BEGIN
IF @Username IS NULL
BEGIN
IF @Access IS NULL
BEGIN
PRINT 1
SELECT a.XID, a.AppID, a.ResID,
b.AppDescription,
c.ResDescription,
d.Username, d.Custom, d.Region
FROM [Application] a INNER JOIN ApplicationName b
ON a.AppID = b.AppID LEFT JOIN ResTable c
ON a.ResID = c.ResID LEFT JOIN AppResCustom d
ON a.XID = d.XID
WHERE a.AppID = @AppID
AND a.ResID = @ResID
END
ELSE
BEGIN
PRINT 2
SELECT a.XID, a.AppID, a.ResID,
b.AppDescription,
c.ResDescription,
d.Username, d.Custom, d.Region
FROM [Application] a INNER JOIN ApplicationName b
ON a.AppID = b.AppID LEFT JOIN ResTable c
ON a.ResID = c.ResID LEFT JOIN AppResCustom d
ON a.XID = d.XID
WHERE a.AppID = @AppID
AND a.ResID = @ResID
AND d.Custom = @Access
END
END
ELSE
BEGIN
PRINT 3
SELECT a.XID, a.AppID, a.ResID,
b.AppDescription,
c.ResDescription,
d.Username, d.Custom, d.Region
FROM [Application] a INNER JOIN ApplicationName b
ON a.AppID = b.AppID LEFT JOIN ResTable c
ON a.ResID = c.ResID LEFT JOIN AppResCustom d
ON a.XID = d.XID
WHERE d.Username = @Username
AND a.AppID = @AppID
AND a.ResID = @ResID
AND d.Custom = @Access
END
UNION
PRINT 4
SELECT a.XID, a.AppID, a.ResID,
b.AppDescription,
c.ResDescription,
d.Username, d.Custom, d.Region
FROM [Application] a INNER JOIN ApplicationName b
ON a.AppID = b.AppID LEFT JOIN ResTable c
ON a.ResID = c.ResID LEFT JOIN AppResCustom d
ON a.XID = d.XID
WHERE d.Username = @Username
AND a.AppID = @AppID
AND a.ResID = @ResID
AND d.Custom = @Access
AND d.Region = @Region
END
I want to know the top 5 patterns in sales, the report will like this:
Month Top1 Top2 Top3 Top4 Top5
2005-06 A1 A2 A3 A4 A5
2005-07 B1 B2 B3 B4 B5
2005-08 C1 C2 C3 C4 C5
--- --- ---
What I did is:
declare @StartDate and @EndDate, set @StartDate and @EndDate
Delete AAAA (AAAA is a table)
Begin
While (@EndDate<somedate)
Insert into AAAA(sales, Month, Pattern)
Select TOP 5 sales, Month,pattern from sometables order by sales DESC
increase @StartDate and @EndDate by a month
End
Select * from AAAA
It works fine. My question is: Can I get rid of table AAAA? Is there a better way that just use Top 5 combine with something say Union? ( I tried Union and failed )
Thanks in advance,
Long
Hi All,
Pls look at the following:
http://blogs.conchango.com/jamiethomson/archive/2006/07/10/SSIS_3A00_-MULTICAST-bug.aspx
The first comment, by 'zpeceno', exactly describes a problem that I have hit upon.
However despite looking thro the list of issues resolved in SP1, I've found no mention of it.
Any chance I could get some offical comment re. the bug described, when it was(/has it been?) officially acknowledged, and what service pack (if any) resolves it?
Many thanks,
hi!
What do you think is the error in this sql squery?
What I'm trying to do is to get all the records having dates from 2007/01/21 to 2007/02/20 where
YearFr =2007 MonthFr =01 DayFrom =21 YearTo =2007 MonthTo =02 DayTo =20
By the way, this is part of my code: '||||| Open connection
MyConn.Open()
'||||| Create Command Object for filtering time ins and time outs base from Year and Month
Dim odbcCommand_date As OdbcCommand = New OdbcCommand("Select TT0001.Year, TT0001.Month,TT0001.Day, TT0001.in_hh, TT0001.in_mi,TT0001.out_hh,TT0001.out_mi,TM1001.kbn_name from TT0001 inner join TM1001 on TT0001.kintai_status = TM1001.kbn where TT0001.syain_id =? AND TT0001.Year = ? and TT0001.Month = ? and TT0001.Day = ? or TT0001.Day > ? ORDER BY TT0001.Year,TT0001.Month,TT0001.Day UNION Select TT0001.Year, TT0001.Month,TT0001.Day, TT0001.in_hh, TT0001.in_mi,TT0001.out_hh,TT0001.out_mi,TM1001.kbn_name from TT0001 inner join TM1001 on TT0001.kintai_status = TM1001.kbn where TT0001.syain_id =? AND TT0001.Year = ? and TT0001.Month = ? and TT0001.Day = ? or TT0001.Day < ? ORDER BY TT0001.Year,TT0001.Month,TT0001.Day", MyConn)
'||||| Add Parameters and set values.
odbcCommand_date.Parameters.Add("@P1", OdbcType.VarChar).Value = label_emp_id.Text.ToString
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = YearFr
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = MonthFr
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = DayFrom
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = DayFrom
odbcCommand_date.Parameters.Add("@P1", OdbcType.VarChar).Value = label_emp_id.Text.ToString
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = YearTo
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = MonthTo
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = DayTo
odbcCommand_date.Parameters.Add("@P1", OdbcType.Char).Value = DayTo
The error is in the UNION part of the query...
PLs help me.
Thanks!
Sheila
I have n Tables: T_1, T_2, ... T_n that all have the same exact fields/columns.
Ultimately, I want to search through ALL n tables and return a single table of relevant results from all tables, arranged in order by rank.
I'm not sure if this is possible. So far, I have:
1 SELECT RANK, field_1, field_2, ..., field_m FROM
2 (
3 SELECT RANK, field_1, field_2, ..., field_m FROM T_1,
4 CONTAINSTABLE(T_1, field_i,@searchText) searchTable
5 WHERE KEY = T_1.field_i
6 UNION
7 SELECT RANK, field_1, field_2, ..., field_m FROM T_2,
8 CONTAINSTABLE(T_2, field_i,@searchText) searchTable
9 WHERE KEY = T_2.field_i
10 UNION
11 .
12 .
13 .
14 UNION
15 SELECT RANK, field_1, field_2, ... field_m FROM T_n,
16 CONTAINSTABLE(T_n, field_i,@searchText) searchTable
17 WHERE KEY = T_n.field_i
18 )
19 ORDER BY RANK DESC
I haven't tried it yet, but it seems wrong. How do we actually do this?
hi,i have a union statement that works like a charm:SELECT
[Name],
[EventID] AS [ItemID],
[TourID],
[Date],
NULL AS [StartDate],
[Date] AS [SortDate],
[Type] FROM [Events]
WHERE
[TourID] IS NULL
AND
AccessLevel <= @AuthenticationLevel
UNION
SELECT
[Name],
[TourID] AS [ItemID],
[TourID],
NULL AS [Date],
[StartDate],
[StartDate] AS [SortDate],
'2' AS [Type]
FROM
[Tours]
WHERE
AccessLevel <= @AuthenticationLevel
ORDER BY
[SortDate] this statement selects all the records i want from both tables, and orders the entire new table by sort date.what i want to do is to add a limitation on the number of records. i have tried using both LIMIT and TOP commands, but i can't get it working. both of the below statements give me a syntax error saying "Incorrect syntax near the keyword 'ORDER'"first try:SELECT * FROM (<same_statement_as_above>) ORDER BY [SortDate] LIMIT 2second try:SELECT TOP 2 * FROM (<same_statement_as_above>) ORDER BY [SortDate]what am i doing wrong, and how do i achieve what i want?i am working with mssql server 2005 (express locally, and standard on my hosting service). thanks for your help!
Hi all
I'm new to SQL Server 2005 and its queries. I've created a DB that stores bonusses. For example, a person goes out with usually 4 other people, and does their work. The first person is the engineer, the second is the team leader, and the third and forth is the helpers. According to the number of notes they capture for that day, they get a bonus. if 3 notes has been done for the day, the enigeer gets 100 bucks per note, aka 300 bucks - 3 * 100 = 300. the team leader gets half of it, 150, and the helpers get each half of that, 75 and 75.
in a select query i did the match/calculation
now i want to add everything up to get a total, 300+150+75+75 - how does one do it, and write it to a table? Note: The amount of people can change, the role of the person can change, so a helper can be a team leader or engineer as well, and the amount also changes depending on performance.DECLARE @BonusID int;
SET @BonusID = '1';
SELECT bd.BonusDetailID, bd.BonusID, u.Name, u.Surname, r.Role, b.Notes * a.Amount AS Total, bd.DateModified
FROM tblBonusDetails AS bd INNER JOIN
tblBonusses AS b ON bd.BonusID = b.BonusID INNER JOIN
tblUsers AS u ON bd.UserID = u.UserID INNER JOIN
tblAmounts AS a ON b.AmountID = a.AmountID INNER JOIN
tblRoles AS r ON bd.RoleID = r.RoleID
WHERE (bd.BonusID = @BonusID) AND (r.Role = 'Surveyor')
UNION
SELECT bd.BonusDetailID, bd.BonusID, u.Name, u.Surname, r.Role, (b.Notes * a.Amount)/2 AS Total, bd.DateModified
FROM tblBonusDetails AS bd INNER JOIN
tblBonusses AS b ON bd.BonusID = b.BonusID INNER JOIN
tblUsers AS u ON bd.UserID = u.UserID INNER JOIN
tblAmounts AS a ON b.AmountID = a.AmountID INNER JOIN
tblRoles AS r ON bd.RoleID = r.RoleID
WHERE (bd.BonusID = @BonusID) AND (r.Role = 'Team Leader')
UNION
SELECT bd.BonusDetailID, bd.BonusID, u.Name, u.Surname, r.Role, ((b.Notes * a.Amount)/2)/2 AS Total, bd.DateModified
FROM tblBonusDetails AS bd INNER JOIN
tblBonusses AS b ON bd.BonusID = b.BonusID INNER JOIN
tblUsers AS u ON bd.UserID = u.UserID INNER JOIN
tblAmounts AS a ON b.AmountID = a.AmountID INNER JOIN
tblRoles AS r ON bd.RoleID = r.RoleID
WHERE (bd.BonusID = @BonusID) AND (r.Role = 'Helper')
ORDER BY Total DESC
BonusDetailID
BonusID
Name
Surname
Role
Total
DateModified
-------------
-----------
------------------------
-----------------------
--------------------------
-------------
-----------------------
1
1
Riaan
de Lange
Surveyor
300
2008/03/21 14:17
2
1
Kobus
Vermaak
Team Leader
150
2008/03/21 14:17
3
1
Johan
Bester
Helper
75
2008/03/21 14:17
4
1
Pieter
Koen
Helper
75
2008/03/21 14:17
How do i get the total for the bonusid = 1? which should be 600
Hi All I'm Try to get some data from some table but i wont get in 1 dataset how can i do CREATE PROCEDURE sp_r_getSalesBySalesSite (@dtStart datetime,@dtEnd datetime,@SiteID varchar(15) = '')ASBEGINSELECT distinct tblInvoiceLine.SubTotal,tblInvoiceLine.Isdeleted, tblSite.SiteID, tblSite.SiteName, tblInvoice.InvoiceDate,tblInvoice.InvoiceID,tblproduct.productCostPrice as Cost,tblInvoiceLine.SubTotal-tblproduct.productCostPrice as Profit,(dbo.fn_getPayment(PaymentId, tblPayment.InvoiceId, PaymentDate,'CC')) as CC , (dbo.fn_getPayment(PaymentId, tblPayment.InvoiceId, PaymentDate,'CQ') ) as CQ, (dbo.fn_getPayment(PaymentId, tblPayment.InvoiceId, PaymentDate,'Cash')) as CASHFROM tblInvoice INNER JOIN tblDiscount ON tblInvoice.InvoiceID = tblDiscount.InvoiceID INNER JOIN tblSite ON tblInvoice.SiteID = tblSite.SiteIDinner JOIN tblInvoiceLine on tblInvoiceLine.InvoiceID = tblInvoice.InvoiceIDINNER JOIN tblProduct on tblInvoiceLine.ItemCode = tblProduct.ProductCodeINNER JOIN tblPayment on tblInvoice.InvoiceID = tblPayment.InvoiceIDWHERE (tblInvoice.IsInvoiceDeleted = 0)ANDtblInvoice.InvoiceDate between @dtStart + '00:00:00.000' and @dtEnd + '23:59:59.999'and tblSite.SiteID like '%' + @SiteID + '%'Order by tblSite.SiteID, tblSite.SiteName, tblInvoice.InvoiceDateSELECT tblInvoice.InvoiceID,tblRefund.RefundAmount,tblRefund.RefundDate,RefundMethod,tblSite.SiteIDFROM tblInvoice INNER JOIN tblRefund ON tblInvoice.InvoiceID = tblRefund.InvoiceIDINNER JOIN tblSite ON tblInvoice.SiteID = tblSite.SiteIDWHERE (tblInvoice.IsInvoiceDeleted = 1)ANDtblRefund.RefundDate between @dtStart and @dtEndand tblSite.SiteID like '%' + @SiteID + '%'Order by tblInvoice.InvoiceDate,tblinvoice.invoiceidEND This is the PROCEDURE im using Any one Can Help Me Please
View 3 Replies View Related Hello,Im wondering if someone can offer some advice, Im trying to get a union in the statement below to it will return all the data as rows in one table..... DECLARE @counter INT
SET @counter = 0
WHILE @counter < 24
BEGIN
SELECT "Hour"=(SELECT @counter),
"HourAverage"=(SELECT COUNT(*) FROM webstats WHERE (hourstamp = @counter) AND (datestamp < getdate())) / (@numberofdays),
"HourToday"=(SELECT COUNT(*) FROM webstats WHERE (hourstamp = @counter) AND datestamp > DATEADD(d,-1,GETDATE()) AND datestamp < DATEADD(d,1,GETDATE()))
SET @counter = @counter + 1
ENDIf i write each statment out with the values as apose to @counter and union under each i get the result i am looking for... SELECT "Hour"=(SELECT 0),
"HourAverage"=(SELECT COUNT(*) FROM webstats WHERE (hourstamp = 0) AND (datestamp < getdate())) / (@numberofdays),
"HourToday"=(SELECT COUNT(*) FROM webstats WHERE (hourstamp = 0) AND datestamp > DATEADD(d,-1,GETDATE()) AND datestamp < DATEADD(d,1,GETDATE()))
UNION
SELECT "Hour"=(SELECT 1),
"HourAverage"=(SELECT COUNT(*) FROM webstats WHERE (hourstamp = 1) AND (datestamp < getdate())) / (@numberofdays),
"HourToday"=(SELECT COUNT(*) FROM webstats WHERE (hourstamp = 1) AND datestamp > DATEADD(d,-1,GETDATE()) AND datestamp < DATEADD(d,1,GETDATE()))
UNION
etc. etc. Does doing a while loop have any performace advantages to my other example? Thanks Bart
sql = "Select c1 from t1
sql = sql & " Union Select c1 from t2 Order By c1"
t1=c1 = 1,2,3
t2=c1 = 200,5,300
datatype=nvarchar
result is not ordered as 1,2,3,4,200,300 why