I have three tables named as BroadCastetails,PaymetMaster,MemberMaster.
I have two query as mentioned below--
SELECT MemberMaster.FirstName, MemberMaster.LastName, BroadCastDetails.BroadCastName FROM BroadCastDetails INNER JOIN MemberMaster ON 5 = MemberMaster.MemberID AND BroadcastCreationDateTime between '01/01/2007' AND '12/12/2007'
SELECT BroadCastDetails.ScheduledStartDateTime, BroadCastDetails.TotalCalls FROM BroadCastDetails UNION SELECT PaymentTransaction.TransactionDate, PaymentTransaction.CallsToCredit FROM PaymentTransaction
I want the result of the above two query in a GridView.How can I do that ? Its urgent...
How can I write a query that will return the following result to show the order details for customerid 1000 for a date range between 01/01/2003 and 01/08/2003
OrderDate Quantity FreeShipping ========= ======== ============ 01/01/2003 5 Y 01/03/2003 0 Y 01/04/2003 9 N 01/08/2003 14 N
Note that even if an order was not placed and the date was a freeshipping date, it is still displayed in the resultset
SELECT plan2008.jahr, plan2008.monat, plan2008.kdkrbez, plan2008.kdgrbez, plan2008.abgrbez, plan2008.artnr, FROM plan2008 GROUP BY plan2008.jahr, plan2008.monat, plan2008.kdkrbez, plan2008.kdgrbez, plan2008.abgrbez, plan2008.artnr
UNION
SELECT fsp_auftrag.jahr, fsp_auftrag.monatnr, fsp_auftrag.kundenkreis, fsp_auftrag.kundengruppe, fsp_auftrag.abnehmergruppe, fsp_auftrag.artnr FROM fsp_auftrag GROUP BY fsp_auftrag.jahr, fsp_auftrag.monatnr, fsp_auftrag.kundenkreis, fsp_auftrag.kundengruppe, fsp_auftrag.abnehmergruppe, fsp_auftrag.artnr
My problem is that each table contains additional values like art_amount, art_turnover etc... whereby the first table contains plan values while the second table contains actual values.
My goal is to get plan as well as the actual values in one row, how is that possible? If I put the values into each of the selects I get two rows, which is not the wished output.
Is it possible to join the tables after the union took place?
I am trying to merge the selected contents of 2 tables by using a date field in both tables.
For example, in the AdventureWorks database of VS2005, I would like 3 columns: loginID, modifieddate and addressline1. Where the row has come from the Employee table, the address field should be blank, so its not really a join that I want (at least I dont think so).
This query only returns 2 colums: select loginid, modifieddate from HumanResources.Employee union all select addressLine1, modifiedDate from Person.Address
Is this possible, or do I need an additional common column that can be inner joined on the 2 tables? Can anyone help?
Ok, getting a little better at joins, but now need to take it two more steps.Main table tblEquipmentsFields: ID, EquipmentType, Location, StatusSecond Table tblEquipments_GroupFields: equipmentID, categoryID, subCategoryID (all are ints)I joined these two together and got the info back I needed:SELECT a.ID, a.Description, a.Status, a.Location, from tblEquipments ainner join tblEquipments_Group U on u.categoryID = a.EquipmentTypeand u.subCategoryID = @type Now, the a.status returns a number. What the status actually is is in tblStatus.Fields: statusID (int) , Status (varchar).So, the statusID matches a.Status.I need to get the text from tblStatus in the field Status and replace the a.Status (which is a number still) with the text.The other one, location, is the same situation.I've been trying to do another join and am at an end on this.Suggestions?Thanks!!Zath
I am trying to normalize data using the unpivot transform. I have to unpivot using more than one key so I have a multicast feeding into two unpivot transforms then into a sort transform. This is where my problem starts - I have tried using a Merge Join (inner Join) transform but dont get the expected result.
My original data looks like this:
Pk_ID
Choice1
Choice2
Feedback1
Feedback2
10
a
b
x
y
After the mulitcast - unpivot - Merge Join, the expected result is: (pk_newID is an identity)
Pk_newID
fk_ID
Choice
Feedback
563
10
a
x
564
10
b
y
However with a Merge-Join (inner join on pk_ID) I get
Simple Explanation: I have a table with numbers 1-5, I want to left join a table with numbers 1-10, and show a sum... So since numbers 6-10 will not match anything, I will have a sum of zero for those rows. Simple, I thought!
SELECT SUM(ISNULL(RI.quantity,0)) AS Quantity, usr.conversionRate, usr.CorpType FROM ( SELECT 0 AS conversionRate, 1 AS CorpType UNION ALL SELECT .05, 1 UNION ALL SELECT .5, 1 UNION ALL SELECT 1, 1 UNION ALL SELECT 1.5, 1 UNION ALL SELECT 1.75, 1 ID UNION ALL SELECT 2, 1 UNION ALL SELECT 0, 2 UNION ALL SELECT .05, 2 UNION ALL SELECT .5, 2 UNION ALL SELECT 1, 2 UNION ALL SELECT 1.5, 2 UNION ALL SELECT 1.75, 2 ID UNION ALL SELECT 2, 2 ) usr LEFT OUTER JOIN Items I ON I.ConversionRate = usr.conversionRate LEFT OUTER JOIN Requests_Items RI ON I.ID = RI.itemID AND ISNULL(RI.impactMonth,RI.dueDate) >= '02/01/2008' and ISNULL(RI.impactMonth,RI.dueDate) < '03/01/2008' LEFT OUTER JOIN Corporations_Requests CR ON CR.requestID = RI.requestID LEFT OUTER JOIN Corporations C ON C.CorpID = CR.corporationID AND C.CorpType = usr.CorpType GROUP BY usr.CorpType, usr.conversionRate ORDER BY usr.CorpType, usr.conversionRate
I have no clue why this doesn't work. It appears that the UNION ALL(s) are being crossed joined. Any light shed on this would be greatly appreciated!
Hallo !I have 2 tables with similar construction.DataOLD and DataNEW.In my grid I need a JOINED table.On the one hand I need all the data from the old table and the datafrom then new table with the same id (left outer join works)But additionally I need all rows from the new table where no equivalentrows are in the old table.example:TableOLDdiameter amountOLD20 10050 20030 300TableNEWdiameter amountNEW20 50060 60070 120Wished Result:diameter amountOLD amoutNEW20 100 50050 200 NULL30 300 NULL60 NULL 60070 NULL 120Who can help me?Many Thanks.aaapaul
I have 3 tables I want to use in a view. Table A has field 1,2,3,4,5and table B has field 1,2,3,4,5. I want to do a union on these. (I havedone so successfully if I stop here) I also want to join table C whichhas field 1,6,7,8,9. I would like to join on field 1 and bring in theother fields. I can join table C to A or B. I can union table A and Bbut I do not know how to both union A and B then join C. Can someoneplease help me? Thanks in advance.
Can i do a Full outer join on a union? and if so how?
I have this stored procedure. but then i was notified that they want to show all the sales reps, even if they dont have visits, and all the activities, even if neither has values. Right now this is what it shows:
Code Block ALTER PROCEDURE [dbo].[PROC_DAILY_ACTIVITY] (@Region_Key int=null) AS BEGIN
SELECT NULL as Progress_time, NULL As completed_time, NULL as Dial_in_date, NULL AS Customer_Code, Non_Customer_Activities.question_code, Non_Customer_Activities.description, Sales_Group.Region, Sales_Group.Name AS Territory_Name, Non_Customer_Activities.Que_Desc AS Store_Name, Non_Customer_Activities.Logged_Time AS TheDate, CONVERT(FLOAT,Non_Customer_Activities.Logged_Time) Float_Date, Non_Customer_Activities.response AS Response, NULL AS is_Visit_Fg FROM Qry_Sales_Group AS Sales_Group INNER JOIN (SELECT QH.question_code, Question_Header.description, CONVERT(datetime, DATEADD(day, QH.cycle_day - 1, P.start_date), 6) AS Logged_Time, SUBSTRING(QH.entity_code, 1, 5) AS SR_Code, QH.response, Territory_In_Sales_Responsible.Territory_Code AS SR_Territory_Code, 'Not Customer Related' AS Que_Desc FROM question_history AS QH INNER JOIN period AS P ON P.period_code = QH.period_code INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Sales_Responsible AS Territory_In_Sales_Responsible ON Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code = SUBSTRING(QH.entity_code, 1, 5) COLLATE Latin1_General_CI_AS INNER JOIN questions AS Question_Header ON Question_Header.question_code = QH.question_code WHERE (QH.entity_code LIKE '%.USER%') AND (Question_Header.question_code IN ('AME01', 'ASE01', 'ACO01', 'ALU01', 'AOS01', 'APH01', 'ATR01', 'ATE01', 'ACR06', 'ACR05', 'ACR02', 'ACR03', 'ACR08', 'ACR07')) AND (CONVERT(datetime, DATEADD(day, QH.cycle_day - 1, P.start_date), 6) = case when Datepart(Weekday, Getdate()) = 2 then datediff(dd,0,GetDate()) - 3 else datediff(dd,0,GetDate()) - 1 end )) AS Non_Customer_Activities ON Sales_Group.Code = Non_Customer_Activities.SR_Territory_Code WHERE Region_Key=@Region_Key UNION ALL SELECT in_progress_time, completed_time , dial_in_date, Customer_Activities.Customer_Code, NULL AS Expr1, NULL AS Expr2, Sales_Group.Region, Sales_Group.Name AS Territory_Name, Customer_Activities.Customer_Name AS Store_Name, Customer_Activities.Logged_Time AS TheDate, CONVERT(FLOAT,Customer_Activities.Logged_Time) Float_Date, NULL AS Response, Customer_Activities.Is_Visit_Fg FROM Qry_Sales_Group AS Sales_Group INNER JOIN (SELECT DISTINCT in_progress_time,completed_time,dial_in_date, V.visit_date AS Logged_Time, Customer_Code, customer_name AS Customer_Name, Territory_In_Sales_Responsible.Territory_Code AS Cust_Territory_Code, 1 AS Is_Visit_Fg FROM Qry_visits AS V INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Sales_Responsible AS Territory_In_Sales_Responsible ON Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code = V.sales_person_code COLLATE Latin1_General_CI_AS INNER JOIN FSSRC.dbo.Communication_statistics as Communication ON Communication.sales_person_code=Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code COLLATE Latin1_General_CI_AS WHERE (CONVERT(datetime, CONVERT(Varchar, V.visit_date, 110)) = case when Datepart(Weekday, Getdate()) = 2 then datediff(dd,0,GetDate()) - 3 else datediff(dd,0,GetDate()) - 1 end )
) AS Customer_Activities ON Sales_Group.Code = Customer_Activities.Cust_Territory_Code WHERE Region_Key=@Region_Key end
I have a query which wants to union join the data. no matter how many times I tried, I got an error. How to change my union query?
select distinct b.lev5 AS "LEVEL 1",b.lev5NAME, C.lev7 "FUND", C.lev7NAME,round (sum(a.data),2) AS AMOUNT (Select distinct b.lev5 from bf_data a inner join bf_orgn_cnsl_tbl b on a.bf_orgn_cd = b.bf_orgn_cd
I have a subscriptions table that has many line items for each record. Each line item has a different type, dues, vol, Chapt.
101 dues Mem 100 101 Vol charity 200 101 chapt CHi 300
I want my end result to have one line item per record id, but I keep coming up with an error. I am pretty sure I am close, but need assistance before I can proceed.
101 mem 100 charity 200 chi 300
Error: Server: Msg 207, Level 16, State 3, Line 2 Invalid column name 'PRODUCT_CODE'. Server: Msg 207, Level 16, State 1, Line 2 Invalid column name 'product_code'. Server: Msg 207, Level 16, State 1, Line 2 Invalid column name 'product_code'.
SELECTp.ID, p.PRODUCT_CODE as Chapt, p.product_code as Dues, p.product_code as Vol from ( SELECT ID, product_code as Chapt, Null as dues, Null as Vol from subscriptions where prod_type = 'chapt' AND BALANCE > 0
union all
SELECT ID, Null as chapt, product_code as Dues, Null as vol from subscriptions where prod_type = 'dues' AND BALANCE > 0
union all
SELECT ID, Null as chapt, Null as dues, product_code as Vol from subscriptions where prod_type = 'vol' AND BALANCE > 0
Struggling to come up with an overall sum for each individual user when using the below code
SELECT Practice.ibvStaffCategorisation.StaffId ,Practice.ibvStaffTotalsCL2Y.Period ,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes ,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
[Code] ....
As I am using union all it shows two values for each user, the problem is I am getting the data via lookup like below
I don't think I can use a Sum within a lookup so at the moment it is only bringing through the first value for each user but I would like it to bring through both.
Is there a way to do this within the dataset or via the query in the table?
We all were new at one point.... any help is appreciated.
Objective:
Combining two 49,000 row tables and remove records where there is only 1 column difference. (keeping the specified column value removing the one with a blank.)
Reason:
I have 2 people going through a list, coding a specific column with a single letter value. They both have different progress on each sheet. Hence I am trying to UNION them and have a result of their combined efforts without duplicates.
My progress/where I'm stuck:
Here is my first query/union:
SELECT * FROM [Eds table] UNION SELECT * FROM [Vickis table];
As shown above, I have unioned these 2 tables and my results removed th obvious whole record duplicates, but since 1 column is different on these, a union without criteria considers them unique.....
an example of duplicates that I must remove are as follows:
I am trying to get a consolidated sum of all the columns of the two tables that I am Using the UNION on. I can not get the sum function to work or the group by.
SELECT T2.State,t2.Taxcode, Taxable = Case When T1.TaxCode <> 'exempt' and T1.TaxStatus = 'Y' then T1.LineTotal - ((T0.DiscPrcnt/100) * T1.LineTotal) Else 0 End, 'NonTaxable' = Case When T1.TaxCode = 'exempt' or T1.TaxStatus = 'N' then T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal) Else T1.DistribSum End, T1.VatSum as 'Total Tax', (T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal) + T1.Vatsum) as 'Line Total' FROM inv1 t1 inner JOIN oinv t0 ON T0.DocEntry = T1.DocEntry inner join CRD1 T2 on T0.Cardcode = T2.CardCode WHERE T0.DocDate >='[%1]' AND T0.DocDate <='[%2]' and t2.address = T0.shiptocode and t2.adrestype = 's' UNION ALL SELECT t2.state,t2.taxcode, Taxable = Case When T1.TaxCode <> 'exempt' and T1.TaxStatus = 'Y' then -(T1.LineTotal - ((T0.DiscPrcnt/100) * T1.LineTotal)) Else 0 End, 'NonTaxable' = Case When T1.TaxCode = 'exempt' or T1.TaxStatus = 'N' then -(T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal)) Else T1.DistribSum End, -T1.VatSum as 'Total Tax', -(T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal) + T1.Vatsum) as 'Line Total' FROM RIN1 t1 inner JOIN ORIN t0 ON T0.DocEntry = T1.DocEntry inner join CRD1 T2 on T0.Cardcode = T2.CardCode WHERE T0.DocDate >='[%1]' AND T0.DocDate <='[%2]' and t2.address = T0.shiptocode and t2.adrestype = 's' order by T2.STATE
I am writing a stored procedure that takes in a customer number, a current (most recent) sales order quote, a prior (to most current) sales order quote, a current item 1, and a prior item 1, all of these parameters are required.Then I have current item 2, prior item 2, current item 3, prior item 3, which are optional.
I added an IF to check for the value of current item 2, prior item 2, current item 3, prior item 3, if there are values, then variable tables are created and filled with data, then are retrieved. As it is, my stored procedure returns 3 sets of data when current item 1, prior item 1, current item 2, prior item 2, current item 3, prior item 3 are passed to it, and only one if 2, and 3 are omitted.I would like to learn how can I return this as a one data set, either using a full outer join, or a union all?I am including a copy of my stored procedure as it is.
I have 2 Tables one called Reps and the other called STORES I need to use a UNION statement but my Server is saying that the "UNION" is ERROR The Query Designer does not support the UNION SQL construct.
What command would I use to put these 2 tables together? HELP!
I have 2 temporary tables from a previous operation, Tab1 and Tab2, with the same dimensions. How do I create a third table Tab3 with the same dimensions containing the the combined rows of the 2 previous tables? TIA!
Hi there, I have some identical tables that I want to query for a search Is there anyway I can execute the unions first then a where command on all the tables at once I have tried using go but it doesn't seem to work, so I put the where statemtents at the end of each union for now. Here's my code:
strSQL = "SELECT * FROM england WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%' " &_ "UNION ALL SELECT * FROM ni WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%' " &_ "UNION ALL SELECT * FROM wales WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%' " &_ "UNION ALL SELECT * FROM scotland WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%'"
This query works perfectly and orders by just as I need
Code: Select '1st' As [Type], #Uno.ID #Uno.Address, #Uno.shippingInfo FROM #Uno
[Code] ....
However, when I use it in a Union All so I can pull data from 2 diff tables, the order by statement no longer works. How can I order by data in 2 tables?
Code: Select '1st' As [Type], #Uno.ID #Uno.Address, #Uno.shippingInfo FROM #Uno
I try to build some query on hierarchy data and after two days thinking about it i have null result. What I need is union more trees tables by root id to one table.
-- tree -- this query is functional: OK WITH tree (sid, parend_id, level) as ( SELECT sid, parend_id, 0 as level
[Code] ....
But this query work with one root id (100); what can i do when i have more roots id ? -> generate each tree table separated by roots id and then all tables join to one (union).
tblOpenSiteDates Site: int OpenDate: smalldate Comment: VarChar
tblCloseSiteDates Site: int CloseDate: smalldate Comments: VarChar newLocationID: int
I am trying to get a view which would display a site with the open and close dates. Null is ok for a close date for those opens that are still open.. not every office has an open date and close date.. it is possible to have just a close date and not an open date (ie unsure of open date but I know its closing)
so the output would be
viewOpenCloseSites Site: int opendate: smalldate closedate: smalldate
I have two tables with data that I need to get and display in a combobox. What I want to do is have the parent table listed in the combobox with all of its children indented. Sorted by parent then by child.
This SQL seems to be more complex than I have done previously
I can get all of the records from both tables easily:
Code: SELECT strName, ID FROM tblParents as pp INNER JOIN tblChildren as cc ON cc.pID = pp.uiGUID UNION (SELECT strName FROM tblChildren as c INNER JOIN tblParents as p ON c.pID = p.ID)
However, this simply returns a list that is not ordered in any fashion. I'd like to have all of the parent's children shown under the parent name (there is only 1 parent per child and multiple children per parent)
I'm trying to get the results from three different tables, where they have some of the same results. I'm only interested in where they match and then trying to order by date (that's in three columns - M, D, Y). I read previous post in 9/07 but the result doesn't seem to order correctly. It does not have any rhyme or reason to the outputed results as it bounces back and forth through Oct, Nov and Dec posting and throughout all three tables. Here's my query below. Any ideas how I can get my ordering correct for all three tables to display all Oct, all Nov and all Dec?
Thanks so much
select date3, date2, date1, who, what from ( select date3, date2, date1, who, what from shows union select date3, date2, date1, who, what from shares union select date3, date2, date1, who, what from soiree ) a order by date3, date2, date1
I've some AT_DATE tables (eg: AT_20080401, AT_20080402, ...) in SQLServer DB, and these AT_XX table have same columns. but table count could be variant, so I have to query sysobjects to get all of these tables. like this: select name from sysobject where name like 'AT_%'
Now I try to create a view AT which is the union of all these AT_XX tables, such as:
Code Snippet
Create View AT as select * from AT_20080401 union select * from AT_20080402 union ...
but since I'm not sure how many tables there, it would be impossible to write SQL as above. though I could get this union result via stored-procedure, view couldn't be created on the resultset of a procedure. Create View AT as select * from AT_createView() <-- AT_createView must be a function, not procedure
I've checked msdn, there is Multi-statement table-valued function, but this function type seems to create one temporary table, I don't want to involve much of insert operation because there could be more than 1million records totally in these AT_XX tables.
So is there any way to achived my goal? any reference would be appreciated, thanks !
I'm trying to summarize costs assigned to active jobs for a manufacturing business. I need to aggregate work in process (WIP) cost that resides in labor-transaction and part-transaction tables based on transaction types, and transaction dates. Some transactions increase the WIP cost of the job while others decrease WIP. The business needs to see how much $$ is tied up in each job as of a particular date -- the calculation is: ToDate (cost of materials and labor assigned to job) - ToInv (cost of materials returned to inventory) - ToSales (cost of materials sold).
I developed this query incrementally and, so far, the #ToDate, #ToInv, and #ToSales temp tables seem to be populating with the correct data. My thought was to combine these three tables with a UNION and then extract the grand totals and here's where I started getting the following error: ------------------------------------------ Incorrect syntax near the keyword 'UNION'. ------------------------------------------ The problem is with the UNIONs going into #myTotal.
I would appreciate any help with this. Also, please let me know if you can suggest a better design for this. Thanks!
--M&S To Date SELECT pt.jobnum, SUM(pt.extcost) AS Cost FROM parttran pt JOIN jobhead jh ON pt.jobnum=jh.jobnum WHERE trantype IN ( <valid trans types> ) AND jh.JobReleased = 1 AND pt.TranDate < '2007-9-30' GROUP BY pt.jobnum
UNION -- This one works ok.
--L&B To Date SELECT jh.JobNum, sum(l.LaborRate*l.LaborHrs) + sum(l.BurdenRate*l.BurdenHrs) AS Cost FROM LaborDtl l JOIN JobHead jh ON l.JobNum = jh.JobNum WHERE jh.JobReleased = 1 AND l.PayrollDate < '2007-9-30' GROUP BY jh.JobNum
SELECT pt.jobnum, SUM(pt.extcost) AS ToInv FROM parttran pt JOIN jobhead jh ON pt.jobnum=jh.jobnum WHERE trantype IN (<valid trans types>) AND jh.JobReleased = 1 AND pt.TranDate < '2007-9-30' GROUP BY pt.jobnum
SELECT pt.jobnum, SUM(pt.extcost) AS ToInv FROM parttran pt JOIN jobhead jh ON pt.jobnum=jh.jobnum WHERE trantype IN (<valid trans types>) AND jh.JobReleased = 1 AND pt.TranDate < '2007-9-30' GROUP BY pt.jobnum
