I recently tried Re-Installing SQL Server 2005 and setup fails with the following error message. I found a forum that instructed me to make sure that the Distributed Transaction Corrdinator Service is started and that the NT AUTHORITYNetworkService is set under the Log on as tab. I verified both of those settings in my services snap-in under the management console. Looks like setup is failing during this section: Integration Services - Configuring Components...
------------------------------
Microsoft SQL Server 2005 Setup
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: You must have administrative credentials to perform this task. Contact your system administrator for assistance.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29549&EvtType=sqlca%5csqlassembly.cpp%40Do_sqlAssemblyRegSvcs%40Do_sqlAssemblyRegSvcs%40x80131501
I'm using MS Report Designer 2005 and have created a report that uses a cube, with a dimension set up to convert null values to unknown (nullProcessing = UnknownMember).
When I create a parameter using the checkbox in the graphical design mode's filter pane, Report Designer automatically sets the constrained flag, eg:
When running the report and selecting the 'Unkown' value from the parameter list, the error 'the restrictions imposed by the CONSTRAINED flag in the STRTOSET function were violated' occurrs.
How can I prevent the constrained flag from being used, or am I doing something wrong with converting null values to 'Unknown'?
This is what I want to do:1. Delete all tables in database with table names that ends with anumber.2. Leave all other tables in tact.3. Table names are unknown.4. Numbers attached to table names are unknown.5. Unknown number of tables in database.For example:(Tables in database)AccountAccount1Account2BinderBinder1Binder2Binder3.......I want to delete all the tables in the database with the exceptionof Account and Binder.I know that there are no wildcards in the "Drop Table tablename"syntax. Does anyone have any suggestions on how to write this sqlstatement?Note: I am executing this statement in MS Access with the"DoCmd.RunSQL sql_statement" command.Thanks for any help!
I just installed SQL Server 2005 on Windows Vista. I am getting an error "An unknown error occurred in the WMI provider. Error Code 8000000A" when connecting to a web server. The reporting services is running. Is there any other installation that is missing. Please help.
ALTER PROCEDURE dbo.finde @columen_name nvarchar(50) /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ AS declare @maxcount int,@sql varchar(8000) set @maxcount=(select max(taher)+1 from counter)
set @sql='insert into counter (' + @columen_name +') values ( @maxcount )' exec (@sql)
************************ and this is the error
Server Error in '/NTSOLUTIONS' Application. --------------------------------------------------------------------------------
Must declare the scalar variable "@maxcount". Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Must declare the scalar variable "@maxcount".
Source Error:
********************************************* so i can not find where is the exact point
Hi all,I have the below user-defined function on mssql 2000 and I can't workout why i'm getting the following error:-----Server: Msg 156, Level 15, State 1, ProcedurefnCalculateOutworkerPaymentForBox, Line 15Incorrect syntax near the keyword 'IF'.Server: Msg 170, Level 15, State 1, ProcedurefnCalculateOutworkerPaymentForBox, Line 23Line 23: Incorrect syntax near ')'.----------CREATE FUNCTION fnCalculateOutworkerPaymentForBox(@boxid int)RETURNS moneyASBEGINRETURN (/* if the box is a paperback */IF (SELECT COUNT(BoxID) AS NoOfBoxes FROM OutworkerBoxes WHERE BoxID= @boxid AND BoxCode LIKE '%PAPER%') > 1/* If the books are paperback, charge 15p each and add on 30p for adescription book to make 45p */SELECT ((endref - StartRef) * 0.15) + (NoOfDescriptionBooks * 0.30)FROM OutworkerBoxes WHERE BoxID = @boxidELSE/* If the books are normal, charge 25p each and add 20p on fordescription books to make 45p */SELECT ((endref - StartRef) * 0.25) + (NoOfDescriptionBooks * 0.20)FROM OutworkerBoxes WHERE BoxID = @boxid)END-----Below is the sql for the table it works with:-----CREATE TABLE [OutworkerBoxes] ([BoxID] [int] IDENTITY (1, 1) NOT NULL ,[OutworkerID] [int] NOT NULL ,[ImportedBy] [int] NULL ,[StartRef] [int] NOT NULL ,[endref] [int] NOT NULL ,[DateIssued] [datetime] NOT NULL ,[BoxCode] [nvarchar] (50) COLLATE Latin1_General_CI_AS NOT NULL ,[DealerID] [int] NULL ,[StatusID] [int] NOT NULL ,[IssuedBy] [int] NOT NULL ,[BoxNotes] [nvarchar] (200) COLLATE Latin1_General_CI_AS NULL ,[DateImported] [datetime] NULL ,[NoOfDescriptionBooks] [int] NOT NULL CONSTRAINT[DF_OutworkerBoxes_NoOfDescriptionBooks] DEFAULT (0),CONSTRAINT [PK_OutworkerBoxes] PRIMARY KEY CLUSTERED([BoxID]) WITH FILLFACTOR = 90 ON [PRIMARY]) ON [PRIMARY]GO-----If anyone can advise me i'd be most grateful.Thanx in advanceJames
I was testing SQL Mail and I kept getting Unknown Recipient error regardless of what type of user names I tried to put in, I'd appreciate it if any of you could help.
Server: NT 4.0 Server (SP4) SQL Server: 6.5 (SP4) Mail Client: Exchange (5.0)
Since my company doesn't have a designated mailbox for SQL Server, I set it up to use my personal mailbox and profile. I was able to get SQL Mail up and running but couldn't not figure out a correct user name to pass to xp_sendmail.
The usual format of our e-mail addresses is <last name><first name>@xxx.com so I tried '<last name><first name>', '<last name>, <first name>' (the same format shown in the Address Book)...etc. but none of those worked.
#1054 - Unknown column 'teacher_invoices' in 'on clause'
[code] SELECT users.user_id, users.type, users.email, users.firstname, users.surname, teacher_invoices.invoice_date, teacher_invoices.teacher_id FROM users INNER JOIN teacher_invoices ON users.user_id=teacher_invoices=teacher_id WHERE type = 'teacher' AND teacher_invoices.invoice_date >= '2013-01-01' [code]
SELECT Count(*) FROM Incidents I WHERE (Priority = 1) AND (Time_First_Unit_On_Scene IS NOT NULL) AND (DateDiff(s, Time_ClockStart, Time_First_Unit_On_Scene) <= 480) AND (Response_Date BETWEEN '1-Apr-2004') AND ('31-Mar-2005 23:59:59') AND (I.Disposition_ID <> 9 )
...and I get the following error message...
System.Data.OleDb.OleDbException: Difference of two datetime columns caused overflow at runtime.
I am trying to enable FILESTREAM on a SQL 2012 installation that is supporting a Sharepoint 2013 implementation. When I try to enable FILESTREAM using the SQL Server Configuration Manager I receive the following error:
There was an unknown error applying the FILESTREAM settings. Check the parameters are valid. (0x80041008)
I have done this succussfully in the past in SQL2008R2/Sharepoin2010 environment but this is my first attempt with SQL2012/Sharepoint2013 and I am not sure how to proceed with troubleshooting.
I have a SQL2008 database, running Standard Edition 64-bit, database owns by sa, connected to Management Studio using Windows Authentication mode. When I tried to generate scripts from a database, I got the following error messages:-
[Operation is not valid due to the current state of the object. (SqlManagerUI)]
which happened at one particular table. I have reviewed this table definitions are normal, and I could select data from it.
I couldn't find any information anywhere relating to this error messages, except that someone got it when they were trying to change the authentication mode or sa password.
ISSUE: ==================== In SQL 2005 (sp2) I get the following error when preforming a bulk insert with an associated xml format file: "Could not bulk insert. Unknown version of format file"
Question: ==================== I am unsure what they mean by "unknown version". Specifically the format file in question was created using bcp. Also the entire table scenario was created from a msdn example.
Any ideas? have you seen this before?
NOTE: i can reproduce this issue outside the example but will refer to msdn considering it is simple and easily reproducible.
Scenario ==================== I can reproduce this error with the BULK INSERT example discussed on msdn (example A) http://msdn2.microsoft.com/en-us/library/ms191234.aspx
TO REPRODUCE:
* In short the table structure is: Person (Age int, FirstName varchar(20), LastName varchar(30))
* Data File Template: Age<tab>Firstname<tab>Lastname<return>
* Here is some the actual sql statement that pulls this all together BULK INSERT mytestnames FROM 'C:datatestexampledata-c.Dat' WITH (FORMATFILE = 'C:datatestexamplefmt.Fmt');
ISSUE: ==================== In SQL 2005 (sp2) I get the following error when preforming a bulk insert with an associated xml format file: "Could not bulk insert. Unknown version of format file"
Question: ==================== I am unsure what they mean by "unknown version". Specifically the format file in question was created using bcp. Also the entire table scenario was created from a msdn example.
Any ideas? have you seen this before?
NOTE: i can reproduce this issue outside the example but will refer to msdn considering it is simple and easily reproducible.
Scenario ==================== I can reproduce this error with the BULK INSERT example discussed on msdn (example A) http://msdn2.microsoft.com/en-us/library/ms191234.aspx
TO REPRODUCE:
* In short the table structure is: Person (Age int, FirstName varchar(20), LastName varchar(30))
* Data File Template: Age<tab>Firstname<tab>Lastname<return>
* Here is some the actual sql statement that pulls this all together BULK INSERT mytestnames FROM 'C:datatestexampledata-c.Dat' WITH (FORMATFILE = 'C:datatestexamplefmt.Fmt');
I'm trying to execute a SSIS package via proxy user but I keep getting the following error message regardless of I have tried to do to fix it, I have done the following so far:-
1. Recreated the proxy user 2. Retyped the password, under credentials
Message : Unable to start execution of step 1 (reason: Error authenticating proxy "proxyname", system error: Logon failure: unknown user name or bad password.). The step failed.
Hello, I need to perform an update to one of my columns in my gridView. Is it possible to pass in the "column name" during runtime as a parameter to a stored procedure. I tried doing that but it doesn't seem to work? I might be doing something wrong of course. Can anyone give me some advice on how to do this?
I'm sure that the try part of following code are all executedand the session("isLogin") has set to Truebut it always catch a exceptionand redirect to error1.aspx can't figure it out 1 Try 2 mySqlCon = New SqlConnection(strMySqlCon) 3 mySqlCmd = New SqlCommand(strMySqlCmd, mySqlCon) 4 5 mySqlCon.Open() 6 myDataReader = mySqlCmd.ExecuteReader() 7 8 If myDataReader.Read() = True Then 9 10 11 webPwdMd5 = System.Web.Security.FormsAuthentication. _ 12 HashPasswordForStoringInConfigFile(Me.TextBox1.Text, "MD5") 13 14 If webPwdMd5 = myDataReader.Item("password") Then 15 Session("isLogin") = True 16 'Me.TextBox1.Text = "ppp" 17 Response.Redirect("main.aspx") 18 Else 19 Session("islogin") = False 20 Me.Label1.Visible = True 21 End If 22 Else 23 Session("isLogin") = False 24 Me.Label1.Visible = True 25 End If 26 27 mySqlCon.Close() 28 29 Catch Myexception As Exception 30 Session("isLogin") = False 31 Response.Redirect("error1.aspx") 32 33 Finally 34 35 End Try
The Microsoft SQL Server icon is showing on my task bar but with a white (blank) circle "stamped" over the bottom right of the icon.
To me it seems that the implication is that somehow the server is not being recognized as (local)etSDK.
Resting the mouse arrow on the Server icon displays: unknown - \ - MSSQLServer
Needless to say something is quite wrong and I cannot open nor create ANY DATA while on WebMatrix.
If I right-click on the server icon and select "Start" I get the following error: "Invalid handle" which apparently is error number 6.
Previously, after many try-outs I managed to at least put the server icon on the task bar by making use of a setup.ini file that reads as shown below (and then typing from the MSDE sub directory while in MSDOS "setup.exe").
I have installed sql 7.0 with sp1. when I check the files I saw to more file extra i.e. distmdl.mdf and distmdl.ldf along with system and pubs and northwind database files.
Can any one tell me what are these(distmdl.mdf and distmdl.ldf ) files. Thank you!!!!!
I'm running into a situation that has me adding a value of "Unknown" toa reference table. I am being pulled between two trains of thought, andwas curious to get other's input on in. I give an example below.1-) Adding "Unknown" to a reference table is bad. Doing so effectivelychanges the Nullability option of every FK that references the table toa NULLable FK relation.2-) Simply adding a "Not Known/Undetermined" value to the referencetable greatly simplifies things. No schema changes are required, andprograms that use the reference table to populate their drop-downs willautomatically see the new value.Perhaps both approaches are good, but it would all depend of thecontext, the criticality of other FKs that reference the table, how/whenthe data is being used?==============================================EXAMPLE==============================================Assume two tables. Employee & EyeColor, as described below.+===================================+|Employee |+----------------+------------------+|EmployeeId(PK) | EyeColorId (FK) ||NOT NULL | NOT NULL |+----------------+------------------+|marc | 1 ||dan | 2 ||sonya | 1 |+================+==================++================================================= ===+|EyeColor |+---------------+------------------+-----------------+|EyeColorId(PK) | EnglishName(AK1) | FrenchName(AK2) ||NOT NULL | NOT NULL | NOT NULL |+---------------+------------------+-----------------+| 1 | Brown | Brun || 2 | Bloodshot | Rouge || 3 | Blue | Bleue |+===============+==================+============== ===+And let's say that an automated process is being built to import EyeColors from central database. In this process EyeColor may no longer beavailable.With solution #1, new (or existing) data is changed as follows:+----------------+------------------+|EmployeeId(PK) | EyeColorId (FK) ||NOT NULL | NULL |+----------------+------------------+|marc | 1 ||dan | 2 ||sonya | 1 ||newemp | NULL |+================+==================++================================================= ===+|EyeColor |+---------------+------------------+-----------------+|EyeColorId(PK) | EnglishName(AK1) | FrenchName(AK2) ||NOT NULL | NOT NULL | NOT NULL |+---------------+------------------+-----------------+| 1 | Brown | Brun || 2 | Bloodshot | Rouge || 3 | Blue | Bleue |+===============+==================+============== ===+With solution #2, new (or existing) data is changed as follows:+----------------+------------------+|EmployeeId(PK) | EyeColorId (FK) ||NOT NULL | NULL |+----------------+------------------+|marc | 1 ||dan | 2 ||sonya | 1 ||newemp | 0 |+================+==================++================================================= ===+|EyeColor |+---------------+------------------+-----------------+|EyeColorId(PK) | EnglishName(AK1) | FrenchName(AK2) ||NOT NULL | NOT NULL | NOT NULL |+---------------+------------------+-----------------+| 0 | Unknown | Inconnu || 1 | Brown | Brun || 2 | Bloodshot | Rouge || 3 | Blue | Bleue |+===============+==================+============== ===+*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
When I try to run my package from SQL Server Agent I get the following errormessage:
Message Executed as user: NT AUTHORITYNETWORK SERVICE. The return value was unknown. The process exit code was -532459699. The step failed.
It has nothing to do with security in any way: The package actually succeeds!! (no onErrorEvent is thrown, no Error or whatsoever is logged). The only logging I get is this:
#Fields: event,computer,operator,source,sourceid,executionid,starttime,endtime,datacode,databytes,message PackageStart,KMAUSQL01SRV,NT AUTHORITYNETWORK SERVICE,Test,{3790FAE9-8300-4374-B2B7-6A630A508ED9},{E15D1815-1123-42D5-9D32-75B0237660A3},23.08.2006 17:18:02,23.08.2006 17:18:02,0,0x,Beginning of package execution.
PackageEnd,KMAUSQL01SRV,NT AUTHORITYNETWORK SERVICE,Test,{3790FAE9-8300-4374-B2B7-6A630A508ED9},{E15D1815-1123-42D5-9D32-75B0237660A3},23.08.2006 17:18:24,23.08.2006 17:18:24,0,0x,End of package execution.
PackageStart -> PackageEnd .... And in Fact the package DOES exactly do what it should! Just that it throws this error anyway!
What can I do to even trace down where the error occurs?? Not to mention fix it?
Hello All!!! I have a 1.1 asp.net applications that has been in production for a little over a year. It is remoted from a webserver --> application server --> that access data server. I am using win2003 servers and sql 2000. Recently, the application has been having an issue retrieving and storing documents to the sql server. When diagnosing the problem I have ran communication testing to make sure the servers are communicating as they should, I have ran the stored procedure to test for retrieval times and/or failure. So far everything has checked out. While researching the issue, I ran across information that suggested changing from the SQLClient provider to the OLEDB provider. All the changes I have tried appear to have no affect. I will mention that this does seem to occur only when retrieving larger files(probably a communication issue which I have my communications staff looking into). Has anyone experienced this issue and maybe know of any possible solutions? Thanks in advance
With this algorithm you can sum up an unkown number of records, so that an aggregation matches a fixed value. If there is not an exakt match available, the algorithm returns the nearest possible value!-- Initialize the search parameter DECLARE@WantedValue INT
SET@WantedValue = 349
-- Stage the source data DECLARE@Data TABLE ( RecID INT IDENTITY(1, 1) PRIMARY KEY CLUSTERED, MaxItems INT, CurrentItems INT DEFAULT 0, FaceValue INT, BestUnder INT DEFAULT 0, BestOver INT DEFAULT 1 )
-- Aggregate the source data INSERT@Data ( MaxItems, FaceValue ) SELECTCOUNT(*), Qty FROM( SELECT 899 AS Qty UNION ALL SELECT 100 UNION ALL SELECT 95 UNION ALL SELECT 50 UNION ALL SELECT 55 UNION ALL SELECT 40 UNION ALL SELECT 5 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 50 UNION ALL SELECT 250 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 90 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 50 UNION ALL SELECT 350 UNION ALL SELECT 450 UNION ALL SELECT 450 UNION ALL SELECT 100 UNION ALL SELECT 100 UNION ALL SELECT 50 UNION ALL SELECT 50 UNION ALL SELECT 50 UNION ALL SELECT 1 UNION ALL SELECT 10 UNION ALL SELECT 1 ) AS d GROUP BYQty ORDER BYQty DESC
-- Declare some control variables DECLARE@CurrentSum INT, @BestUnder INT, @BestOver INT, @RecID INT
-- If productsum is less than or equal to the wanted sum, select all items! IF (SELECT SUM(MaxItems * FaceValue) FROM @Data) <= @WantedValue BEGIN SELECTMaxItems AS Items, FaceValue FROM@Data
RETURN END
-- Delete all unworkable FaceValues DELETE FROM@Data WHEREFaceValue > (SELECT MIN(FaceValue) FROM @Data WHERE FaceValue >= @WantedValue)
-- Update MaxItems to a proper value UPDATE@Data SETMaxItems =CASE WHEN 1 + (@WantedValue - 1) / FaceValue < MaxItems THEN 1 + (@WantedValue - 1) / FaceValue ELSE MaxItems END
-- Update BestOver to a proper value UPDATE@Data SETBestOver = MaxItems
-- Initialize the control mechanism SELECT@RecID = MIN(RecID), @BestUnder = 0, @BestOver = SUM(BestOver * FaceValue) FROM@Data
-- Do the loop! WHILE @RecID IS NOT NULL BEGIN -- Reset all "bits" not incremented UPDATE@Data SETCurrentItems = 0 WHERERecID < @RecID
-- Increment the current "bit" UPDATE@Data SETCurrentItems = CurrentItems + 1 WHERERecID = @RecID
-- Get the current sum SELECT@CurrentSum = SUM(CurrentItems * FaceValue) FROM@Data WHERECurrentItems > 0
-- Stop here if the current sum is equal to the sum we want IF @CurrentSum = @WantedValue BREAK ELSE -- Update the current BestUnder if previous BestUnder is less IF @CurrentSum > @BestUnder AND @CurrentSum < @WantedValue BEGIN UPDATE@Data SETBestUnder = CurrentItems
SET@BestUnder = @CurrentSum END ELSE -- Update the current BestOver if previous BestOver is more IF @CurrentSum > @WantedValue AND @CurrentSum < @BestOver BEGIN UPDATE@Data SETBestOver = CurrentItems
SET@BestOver = @CurrentSum END
-- Find the next proper "bit" to increment SELECT@RecID = MIN(RecID) FROM@Data WHERECurrentItems < MaxItems END
-- Now we have to investigate which type of sum to return IF @RecID IS NULL IF @WantedValue - @BestUnder < @BestOver - @WantedValue -- If BestUnder is closer to the sum we want, choose that SELECTBestUnder AS Items, FaceValue FROM@Data WHEREBestUnder > 0 ELSE -- If BestOver is closer to the sum we want, choose that SELECTBestOver AS Items, FaceValue FROM@Data WHEREBestOver > 0 ELSE -- We have an exact match SELECTCurrentItems AS Items, FaceValue FROM@Data WHERECurrentItems > 0With references to http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=73540 http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=73610 http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=78015 http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=79505
I have a client using SQL 2k, SP2 (due application requirements, SP3 is notan option - the application vendor will not specify why). We are receiving:[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL ServerConnection BrokenThere doesn't appear to be any rhyme or reason as to why this is happening.And...it shows it's ugly head at random places during execution. Has anyoneexperienced this also, or have any ideas on what to look for? I have seennumerous suggestions stating to upgrade from MDAC 2.6 to 2.7. At thispoint, I'm not sure if thats an option based on the vendors application(which by the way they no longer support!).Any ideas will be greatly appreciated.Greg
I don€™t know if this is the case but I need some help. We have itanium server with Microsoft SQL Server 2005 - 9.00.3054.00 (Intel IA-64) Mar 23 2007 18:42:19 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2).
We has had lot of problem with that the sqlserver.exe process hangs 100% cpu. It€™s totally non responsive I€™m not even able to contact the server with DAC. The general solution has been just kill the process. Not nice.
I have the old age question of how to process a string parameter that is passed to a Stored Procedure that has an unknown number values. The example below has 5 values but it could be anywhere between 1 and 20.
I basically need to extract each value to Insert these values into the appropriate tables.
In the SQL 2000 days I use to do this with some T-SQL code that determines where the comma is and then I get the value and so on.....
I have read somewherethat this can be achieved using the XML Data Type.
Can someone show me that or atleast get me started on how to achiev this?
I have a package which imports text files in a directory. The problem I am having is that the text files have differing numbers of source columns. Can anyone example me some script which handled differing numbers of source columns for a dts package...
