This should be easy for someone, but I just can't seem to find a sample to do this.....I have created a table...CREATE TABLE dbo.test ( oId int NOT NULL UNIQUE, test1 varchar(50) NOT NULL PRIMARY KEY )Now, I need to go back and simply add another column to the table such as test2 varchar(50)Not sure if the insert is the way to go and been playing around with various statements but with no luck.Suggestions?Thanks all,Zath
View 2 RepliesHi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
View 3 Replies View Relatedtable2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
Hello
I've to write an trigger for the following action
When a entry is done in the table Adoscat79 having in the index field Statut_tiers the valeur 1 and a date in data_cloture for a customer xyz
all the entries in the same table where the no_tiers is the same as the one entered (many entriers) should have those both field updated
statut_tiers to 1
and date_cloture to the same date as entered
the same action has to be done when an update is done and the valeur is set to 1 for the statut_tiers and a date entered in the field date_clture
thank you for your help
I've never done a trigger before
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset.
I have teh following code but it works fien when column names are given ahead of time.
If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match.
Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition.
here is my code...
SET @sql1='select * from table1'SET @sql2='select * from table2'
IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn
-- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn
exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
I am new to triggers and surely could use some help.
I can create a trigger to insert related records based on the main tables ID and insert that value into other related tables fine... but...
How do I create a trigger that can insert a record into one table for a columns given value and then insert a record into another table for another given value?
For instance:
New row...
Table1, Column1 (PK) has a value of 101
Table1, Column2 has a value of 'Blue'.
// When a new row is created in Table1 and Column2 has a value of 'Blue'...
I want to insert a new row into Table2 - with Table1 Column1's value.
// Now if Table1, Column2 has a value of 'Red' when the new row was created...
I want to insert a new row into Table3 - with Table1 Column1's value. Not Table2
This has to be inserted into one or the other tables based on column2's value, not both.
Then I want to populate the other related tables (Table4, Table5) with the regular insert statements based on Table1 Column1's value.
This (the conditional part above) has to work with an update to Table1 also.
So if someone came back to that record and changed Column2's value from 'Blue' to 'Red', it would have to delete the appropriate record in Table2 and then insert the new row into Table3 and visa-versa.
Can I do this with one trigger?
Thanks
I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies View RelatedA column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
I would like to change a value after the table updates inserts a new row based on the value of that column
Table Name is: MPanel
Col Names: RID, FPID.
I want to:
If column RID='16'
Then UPDATE FPID='1'
How can I trigger that update? Would this work:???
CREATE TRIGGER dbo.MyTrigLI
ON dbo.MPanel
FOR INSERT, UPDATE
AS
BEGIN
UPDATE [MPanel]
SET
FPID='1'
WHERE (UPDATE(RID='16')
END
We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
View 7 Replies View RelatedHi, can anyone teach me how to automatic create a invoice number and insert or update it to a column?
View 2 Replies View RelatedWe are experiencing problems inserting or updating image fields fromone table to another in SQL Server.When we do this what ever size of file we insert is doubled in sizewhen it is inserted into the destination table.This happens in insert and update queries, and if we use DTS.Any help would be greatly appreciated
View 3 Replies View RelatedI have a table where one column is an id card number (col1) and another is another column (col2). In col2 I have various values for each col1 ie col1 can have various values of col2. How can i insert col1 concatenated for each col1 in another table?
View 2 Replies View RelatedI am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc
SET stc.[Talks] = fmt.found_talks_type
FROM @Find_Missing_Talks fmt
WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks)
AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
I'm importing XML file into DataTable and need to Insert Data into SQL Table.
I'm not sure if its posible to take a DataTable with Data and insert into DataAdapter. From there i wanted to update SQL using TableAdapter?
Any Tips?
Thanks,
I am new to triggers and need help on the following:
I have a hourly table that inserts new rows every hour but I need to either Insert or Update the daily table with the sum of the reading from the hourly table. If a row exist in the daily table with the date of the hourly table, then I need to update this row but if it doesn't exist, I need to insert this row.
Thanks for any suggestions...
Alan
I currently have 2 tables as follows:CREATE TABLE [CRPDTA].[F55MRKT119](mhan8 int,mhac02 varchar(5),mhmot varchar(5),mhupmj int)GOCREATE TABLE [CRPDTA].[F55MRKT11](mdan8 int,mdac02 varchar(5),mdmot varchar(5),mdmail int,mdmag int,mdupmj int)What I would like to do is place a trigger on F55MRKT119 which willinsert records to the F55MRKT11 if they do not exist in that tablebased on the [mdan8] field. If the record does exist I would likeUpdate the corresponding record and increment either the [MDMAIL] orthe [MDMAG] based on the inserted [MHMOT]. What I have so far is asfollows:TRIGGER #1:CREATE TRIGGER trgIns_Summary ON [CRPDTA].[F55MRKT119]FOR INSERTASBEGININSERT INTO CRPDTA.F55MRKT11select INS.MHAN8, INS.MHAC02, INS.MHMOT,case when INS.MHMOT='MAG' then 0 ELSE 1 end,case when INS.MHMOT='MAG' then 1 ELSE 0 end,'0' from INSERTED INSWHERE ins.mhan8 not in(select mdan8 from crpdta.f55MRKT11)ENDTRIGGER #2:CREATE TRIGGER trgUpd_Summary ON [CRPDTA].[F55MRKT119]FOR UpdateASBEGINUPDATE CRPDTA.F55MRKT11SET MDMAIL= case when INS.MHMOT='MAG' then 0+MDMAILwhen INS.MHMOT<>'MAG' then 1+MDMAIL end,MDMAG= case when INS.MHMOT='MAG' then 1+MDMAGwhen INS.MHMOT<>'MAG' then 0+MDMAG endfrom INSERTED INS JOIN CRPDTA.F55MRKT11on(ins.mhan8=mdan8)ENDFor instance if I do the following insert:INSERT INTO CRPDTA.F55MRKT119VALUES('212131','VK4','AL4','0')thenINSERT INTO CRPDTA.F55MRKT119VALUES('212131','VK4','MAG','0')This is what I expect in both tables:[CRPDTA.F55MRKT119] (2 Records)MHAN8 MHAC02 MHMOT MHUPMJ------ ------ ----- ------212131 VK4 AL4 0212131 VK4 MAG 0[CRPDTA.F55MRKT11] (1 Record)MDAN8 MDAC02 MDMOT MDMAIL MDMAG MDUPMJ----- ------ ----- ------ ----- ------212131 VK4 AL4 1 1 0The insert part works fine in that it iserts in both tables with thecorrect values. However it seems as if the Update protion is failingfor some reason. WHat I have tried so far is setting the trigger orderfor the update to run first and vice-versa, but still no luck. Anyhelp would be appreciated.
View 1 Replies View RelatedHi,Does anyone know of a simple way to do this? I want to create aninsert trigger for a table and if the record already exists based onsome criteria, I want to update the table with the values that arepassed in via the insert trigger without having to use all the 'set'statements for each field (so if we add fields in the future I won'thave to update the trigger). In other words, I want the trigger codeto look something like this:if exists (select * from TableA where Fld1 = inserted.Fld1) then//don't do insert, do an update instead (would i want to rollback here?and will I have access to the 'inserted' table still?)Update TableASet TableA.<all the fields> = Inserted.<all the fields>where Fld1 = inserted.Fld1end ifAny help or ideas would be appreciated.Thanks,Teresa
View 3 Replies View RelatedI have a scenario where two tables are in a One-to-Many relationshipand I need to move the data from the Many table to the One table sothat it becomes a One-to-One relationship.I need to salvage the records from the many table and without goinginto detail, one of the reasons I can't do the opposite asthere are records in the ONE table that I need to keep even if theydon't have any child records in the MANY table.Below I created the code to create the sample tables:1- tblProducts is the ONE side table2- tblProductDetails is the MANY side table3- tblProductsResult is the RESULT I expect to get after runningsome T-SQL code4- tblProductComponents is another MANY side table to tblProducts5- tblProductComponentsResult is the RESULT I expect to get...Some of the points to consider:6- Normally all UniqueID columns are to be IDENTITY. Forthis sample i am entering the UniqueID values myself.7- I don't want to create new tables like tblProductsResultand tblProductComponentsResult. I want to update the real tables.I have created the tblxxxResult tables only for this post.8- The goal is to update the name of the Product by giving it thename of the first matching Name from tblProductDetails.9- If there are more than one entry in tblProductDetails for eachProduct, then I need to create new Products inheriting the originalProduct's information including its child records from tblProductComponents.If you run the code and open the tables it will be much clearerto visually see what I want to achieve.CREATE DATABASE MyTestDBGOUSE MyTestDBGOCREATE TABLE [dbo].[tblProducts] ([UniqueID] [int] NOT NULL PRIMARY KEY ,[Name] [varchar] (80) NULL,[TagNo] [int] NULL) ON [PRIMARY]GOINSERT INTO tblProducts VALUES (1, 'ABC', 55)INSERT INTO tblProducts VALUES (2, 'DEF', 66)INSERT INTO tblProducts VALUES (3, 'GHI', 77)INSERT INTO tblProducts VALUES (4, 'JKL', 88)CREATE TABLE [dbo].[tblProductDetails] ([UniqueID] [int] NOT NULL PRIMARY KEY ,[Name] [varchar] (80) NULL,[ProductID] int) ON [PRIMARY]GOINSERT INTO tblProductDetails VALUES (1, 'ABC1', 1)INSERT INTO tblProductDetails VALUES (2, 'DEF', 2)INSERT INTO tblProductDetails VALUES (3, 'GHI', 3)INSERT INTO tblProductDetails VALUES (4, 'GHI2', 3)INSERT INTO tblProductDetails VALUES (5, 'GHI3', 3)INSERT INTO tblProductDetails VALUES (6, 'JKL2', 4)INSERT INTO tblProductDetails VALUES (7, 'JKL', 4)INSERT INTO tblProductDetails VALUES (8, 'JKL3', 4)INSERT INTO tblProductDetails VALUES (9, 'JKL4', 4)CREATE TABLE [dbo].[tblProductComponents] ([UniqueID] [int] NOT NULL PRIMARY KEY ,[ProductID] int,[Component] [varchar] (80) NULL) ON [PRIMARY]GOINSERT INTO tblProductComponents VALUES (1, 1, 'ABCa')INSERT INTO tblProductComponents VALUES (2, 1, 'ABCb')INSERT INTO tblProductComponents VALUES (3, 1, 'ABCc')INSERT INTO tblProductComponents VALUES (4, 2, 'DEFa')INSERT INTO tblProductComponents VALUES (5, 2, 'DEFb')INSERT INTO tblProductComponents VALUES (6, 2, 'DEFc')INSERT INTO tblProductComponents VALUES (7, 2, 'DEFd')INSERT INTO tblProductComponents VALUES (8, 3, 'GHIa')INSERT INTO tblProductComponents VALUES (9, 4, 'JKLa')INSERT INTO tblProductComponents VALUES (10, 4, 'JKLb')CREATE TABLE [dbo].[tblProductComponentsResult] ([UniqueID] [int] NOT NULL PRIMARY KEY ,[ProductID] int,[Component] [varchar] (80) NULL) ON [PRIMARY]GOINSERT INTO tblProductComponentsResult VALUES (1, 1, 'ABCa')INSERT INTO tblProductComponentsResult VALUES (2, 1, 'ABCb')INSERT INTO tblProductComponentsResult VALUES (3, 1, 'ABCc')INSERT INTO tblProductComponentsResult VALUES (4, 2, 'DEFa')INSERT INTO tblProductComponentsResult VALUES (5, 2, 'DEFb')INSERT INTO tblProductComponentsResult VALUES (6, 2, 'DEFc')INSERT INTO tblProductComponentsResult VALUES (7, 2, 'DEFd')INSERT INTO tblProductComponentsResult VALUES (8, 3, 'GHIa')INSERT INTO tblProductComponentsResult VALUES (9, 4, 'JKLa')INSERT INTO tblProductComponentsResult VALUES (10, 4, 'JKLb')INSERT INTO tblProductComponentsResult VALUES (11, 5, 'GHIa')INSERT INTO tblProductComponentsResult VALUES (12, 6, 'GHIa')INSERT INTO tblProductComponentsResult VALUES (13, 7, 'JKLa')INSERT INTO tblProductComponentsResult VALUES (14, 7, 'JKLb')INSERT INTO tblProductComponentsResult VALUES (15, 8, 'JKLa')INSERT INTO tblProductComponentsResult VALUES (16, 8, 'JKLb')INSERT INTO tblProductComponentsResult VALUES (17, 9, 'JKLa')INSERT INTO tblProductComponentsResult VALUES (18, 9, 'JKLb')CREATE TABLE [dbo].[tblProductsResult] ([UniqueID] [int] NOT NULL PRIMARY KEY ,[Name] [varchar] (80) NULL,[TagNo] [int] NULL) ON [PRIMARY]GOINSERT INTO tblProductsResult VALUES (1, 'ABC1', 55)INSERT INTO tblProductsResult VALUES (2, 'DEF', 66)INSERT INTO tblProductsResult VALUES (3, 'GHI', 77)INSERT INTO tblProductsResult VALUES (4, 'JKL', 88)INSERT INTO tblProductsResult VALUES (5, 'GHI2', 77)INSERT INTO tblProductsResult VALUES (6, 'GHI3', 77)INSERT INTO tblProductsResult VALUES (7, 'JKL2', 88)INSERT INTO tblProductsResult VALUES (8, 'JKL3', 88)INSERT INTO tblProductsResult VALUES (9, 'JKL4', 88)I appreciate your assistance on this.Thank you very much
View 6 Replies View RelatedI have two table 'Cal_date' and 'RPT_Invoice_Shipped'.Table cal_data has column month_no, start_date and end_date. And table RPT_Invoice_Shipped has columns Day_No, Date, Div_code, Total_Invoiced, Shipped_Value, Line_Shipped, Unit_Shipped, Transaction_Date.
I am using below insert statment to insert data in RPT_Invoice_Shipped table.
insert into [Global_Report_Staging].[dbo].[RPT_Invoice_Shipped]
(Day_No, Date, Div_code, Total_Invoiced, Transaction_Date)
select , CONVERT(DATE,Getdate()) as Date, LTRIM(RTRIM(div_Code)),
sum(tot_Net_Amt) as Total_Invoiced, (dateadd(day, -1, convert(date, getdate())))
from [Global_Report_Staging].[dbo].[STG_Shipped_Invoiced]
WHERE CONVERT(DATE,Created_date )=CONVERT(DATE,Getdate())
group by div_code
while inserting in column Day_No in RPT_Invoice_Shipped table, I have to use formula (Transaction_Date-start_date+1) where Transaction_Date from STG_Shipped_Invoiced and start_date from Cal_date table. I was using datepart (mm, Transaction_Date) so it gives month_no, and this month_no we can join with month_no of Cal_date table and fetch start_date from Cal_date table, so that we can use start_date for formula (Transaction_Date-start_date+1).
But I am getting difficulty to arrange this in above query. how to achieve this?
All,
Just wondering if anyone is aware of a SQL server shareware utility that places a front end on a table to manage insert, update, and delete of rows on a lookup table.
We can certainly write this but before reinventing the wheel I figure I'd ask and see.
Many Thanks,
Isaac
A problem has come up in designing a Web page to maintain a small reference table in SQL Server 2000 (9 columns, about 25 records).
I tried to design the Web page to allow INSERT and UPDATE operations using a single page that posts back to itself. The page contains a set of empty form fields for a new record, followed by a set of filled-in form field for each row in the table. The form fields for existing records are given a unique name based on the field name concatenated with the primary key value for that row.
If I set up the page to INSERT only, it works properly. But when I add the fields for existing records, the INSERT operation malfunctions. Specifically, anytime a set of existing fields for a particular column is added to the page, the INSERT will no longer work properly for that column. This is true for all fields except the primary key field. It always INSERTs correctly. I tried adding only some columns to the set of existing form fields. In that case, the INSERT operation added the correct values for the fields that were not listed in the existing records section, but failed for the others.
I am using the INSERT INTO syntax for that operation and the recordset .Update syntax for the edits. I tried using the recordset .AddNew/.Update syntax for the insert, but it exhibited the same problems. The column data types contain smallint, bit, nvarchar, and ntext types.
I know that the correct values are being put into the INSERT statement. I also tried renaming the INSERT form fields to be totally different than the names of the existing record fields. But the problem comes back no matter what.
If necessary, I can split the logic so that inserts and updates are handled by different pages. But I would like to make this work if possible. If a reader knows why SQL Server is causing this problem, any help would be greatly appreciated.
From: JAGADISH KUMAR GEDELA [jgedela@miraclesoft.com]
Sent: 10/10/2007 4:13:43 PM
To: jgedela@miraclesoft.com [jgedela@miraclesoft.com]
Subject: forum
Hi all,
I need to Insert the XML File data into SQL SERVER 2005 db(table).
For that I created the table with XML Native column (using typed xml)
*********************************create table command************
CREATE TABLE XmlCatalog (
ID INT PRIMARY KEY,
Document XML(CONTENT xyz))
***********************************
In order to Create the table with typed xml ,before that we have to create the xml schema which i
mentioned below
************************************create schema command********
CREATE XML SCHEMA COLLECTION xyz AS
'Place xml schema file ’
************************************
I created the xml schema file by using the xmlspy software.
--------------------------Insert command---------
INSERT into XmlCatalog VALUES
(1,'copy xml file ‘)
-------------------------------
I need to retrieve the xml data from the table
------------select query----------
SELECT Document.query (‘data (/X12//UserId)') AS USERID,
Document.query (‘data (/X12/X12_Q1/header/ISA//ISA_Authorization_Information_Qualifier)')
AS
ISA_Authorization_Information from XmlCatalog.
-----------------
I Need to update/insert/delete the xml data in the table
Can you please suggest the procedure to implement the above requirement(insert/update/delete)
Is there a way to structure a query to update an existing table record if it already exists, otherwise insert a new record into that table?
View 2 Replies View RelatedHi all,
I've had little success gooling/searching for this (so far).
Given a simple spreadsheet:
StoreNumber StoreName
1
UPDStoreName_1
2
UPDStoreName_2
3
UPDStoreName_3
4
NEWStoreName_4
I want to have an SSIS package that will update a table: mystores (storenumber int, storename nvarchar(255))
StoreNumber StoreName
1
StoreName_1
2
StoreName_2
3
StoreName_3
5 StoreName_5
.. what I need to do is insert the new, update the existing and leave the remaining unchanged. i.e. :
StoreNumber StoreName
1
UPDStoreName_1
2
UPDStoreName_2
3
UPDStoreName_3
4
NEWStoreName_4
5 StoreName_5
(the UPD and NEW are added to simplify the example).
Now the default action of an excel source into an ole db destination is
an insert into the table - so PK constraints causes failures.
Now, given that the table is referred to by other table, and is in a
24x7 website, how do I change the SSIS package such that, on a
row-by-row basis, anUpSert (update or insert) is performed?
The only idea I have so far is:
create temp table
insert excel data into temp table
iterate through the table, using if exists ... update else insert logic <-- this to be done in a SP
Isn't there a better way?
I have Three tables Student,Daily_Attendance_Master and Daily_Attendence_Details.
I want to run sql of insert or update of student attendence(apsent or present) in Daily_Attendence_Details based on Daily_Attendance_Master_Id and Student_Id(from one roll number to another).
If Both are present in table Daily_Attendence_Details then i want to run Updating of attendance from one roll number to another roll number in Daily_Attendence_Details on the basis of Daily_Attendence_Details_Id
And if both or any one is not present i want to run insert of student attendense from  one roll number to another roll number in Daily_Attendence_Details.
I give below the structure of three tables Student,Daily_Attendance_Master and Daily_Attendance_Details.
Student:-
CREATE TABLE [dbo].[Student](
[Student_Id] [bigint] IDENTITY(1,1) NOT NULL,
[Course_Id] [smallint] NULL,
[Class_Id] [int] NULL,
[Batch_Year] [varchar](20) NULL,
[Student_Initials] [varchar](20) NULL,
[Code] ....
Hi ,
I have 2 tables (Dept and Emp)
The columns in table Dept are Deptno and Deptname. Deptno is bigint and it is primary key. In Emp table, columns are Empno(PK) ,EmpName and Deptno(foreign key referring to Dept)
To Insert or Update record in Emp through application, value of Deptno is coming as 0(Zero). I want the value of Deptno to be inserted or updated as null if the value is Zero (0). How to do this in sql server 2005 by using trigger on table Emp
Thanks in advance
regards,
Srinivas Govada
How to find out that a table has changed. For example if a table has 50K rows, and if any update, insert, or delete was made it should be captured without using any trigger. Is it possible to get such information from any of the system table or DMVs?
View 13 Replies View RelatedNeed to update one table with value of a column in another table plus a constant:
UPDATE TABLE_A
SET TABLE_A.COLA=TABLE_B.COLB+'10'
FROM TABLE_A
INNER JOIN TABLE_B
ON TABLE_A.COLA=TABLE_B.COLA
WHERE TABLE_A.COLA=TABLE_B.COLA
The above statement works except the concatenated string has space between TABLE_B.COLB text and '10'. How to remove the space (4 characters) so that the string shows as one word 'TABLE_B.COLB10'?
I have to tables say 'employee1' and 'employee2'
employee1 has lastname
employee2 has firstname, lastname
i have to update firstname in employee1 from firstname in employee2 table and the common field for both tables is 'lastname'
Hi, I have two tables. I want to update two columns in my first table,[ADD_BSL_SALES] and [ADD_BSL_COST] with two values [Sales] and[Costs] held in my #temp table but based on a RUN_DATE from my firsttable.Can anyone point me in the right direction?Thanks in Advance ï?ŠBryanCREATE TABLE [GROSMARG_AUDIT_ADDITION] ([RUN_DATE] [datetime] NULL ,[SALES_DIFF] [numeric](19, 6) NULL ,[COST_DIFF] [numeric](19, 6) NULL ,[ADD_BSL_SALES] [numeric](18, 0) NULL ,[ADD_BSL_COST] [numeric](18, 0) NULL ,[ADD_SALES_DIFF] [numeric](18, 0) NULL ,[ADD_COST_DIFF] [numeric](18, 0) NULL) ON [PRIMARY]GOINSERT RUN_DATE,datetime,INSERT SALES_DIFF,numeric(19,6),INSERT COST_DIFF,numeric(19,6)INSERT ADD_BSL_SALES,numeric(18,0),INSERT ADD_BSL_COST,numeric(18,0),INSERT ADD_SALES_DIFF,numeric(18,0)INSERT ADD_COST_DIFF,numeric(18,0)--- Second TableCREATE TABLE #DUPTOTALS[Sales][Costs]
View 1 Replies View RelatedI need to update a table by copying a column from another table(having the samestructure, but on another database), from the record having the sameprimary key.1 - What is the correct query?2 - I tried copying them record by record, but the datatype is ntext,(it displays <longtext> in the result pane), and trying to update it results in thefollowing errormessage:The text, ntext, and image data types are invalid in this subquery oraggregateexpression.I tried variations of the following:UPDATE TABLESET column0 = (SELECTcolumn0FROManotherDB.dbo.TABLEWHEREanotherDB.dbo.TABLE.column1 = column1)WHEREanotherDB.dbo.TABLE.column1 = column1
View 1 Replies View Relatedhello all,
I don't know how to update table A with data from table B without specifying every column.
These two tables have the same fields and same structure.
I know that it's possible to do the following:
update table A
set A.name = B.name,
A.job = B.job
from table B
But I have many columns and don't want to describe every column, is that possible?
Thanks!