Update A Table From Another One Filtering By Third
Jan 20, 2005
Tell me please how can I make a query that updates one table using data from another but not all and not filtered by its field but filtered by a field in a linked table. I've tryed to use usual construction but it doesn't work:
UPDATE arch_exm SET reg_num = t1.reg_num, dscp = t1.dscp, checktype = t1.contr_type, mark = t1.mark, contr_date = t1.d_kontr, semester = t1.semester, n_register = t1.n_regist FROM (ses_curr INNER JOIN students ON ses_curr.reg_num = students.reg_num INNER JOIN groups ON students.stgroup = groups.stgroup AND students.stgroup = groups.stgroup INNER JOIN specialties ON groups.speciality = specialties.speciality AND groups.speciality = specialties.speciality) t1 WHERE (t1.arch_store = 1) AND (t1.depart = @depart)
So I need to use for update source a table is produced by joining several ones and use a filter in one of its fields but in syntax FROM <table> <name> is supported only one table but not a result of joining. Tell me please how can I describe in SQL using after FROM a result of joining with a filter.
Hi Friends, i have a question table and i want to filter this table using the following stored procedure but i cannot take a resultset ; (there is no error)
Stored Procedure is here:
CREATE PROCEDURE [dbo].[SP$AllQuestion] @Session nchar(10), @Class nchar(10), @Unit nchar(10) AS BEGIN SELECT L.QID, L.CLASS, L.SESSION, L.UNIT, L.CONTENT as QUESTION FROM tblQUESTION L WHERE @Session IS NULL OR L.SESSION = @Session) AND (@Unit IS NULL OR L.UNIT = @Unit AND (@Class IS NULL OR L.CLASS = @Class) AND ((@Session IS NULL AND @Unit IS NULL ) OR (L.SESSION = @Session AND L.UNIT = @Unit)) AND ((@Session IS NULL AND @Class IS NULL ) OR (L.SESSION = @Session AND L.CLASS = @Class)) AND ((@Unit IS NULL AND @Class IS NULL ) OR (L.UNIT= @Unit AND L.CLASS = @Class)) AND (L.UNIT = @Unit AND L.SESSION = @Session AND L.CLASS = @Class) END
i dont know what my fault is ; to your opinion what i have to do? thanks from now on...
I can't find any info on what the 'IN' operator does when filtering data. What's the syntax? I'm hoping this operator will behave similar to the IN operator in sql. I want to pass in 1 or more values that I'd like my data filtered by. If I say <field> IN <single value> it works, but if I say <field> IN <value1>,<value2> I get back nothing at all. Any claification on the use of this operator and the correct syntax for my value list would be greatly appreciated!!
<br><br>I obtain table names from a database and pass them to a dropdownlist. Based on user selection, I want to pass each table name to a query.Here is an extract from my code: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="select * from @dDTable"> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="dDTable" PropertyName="SelectedValue" DefaultValue="product" Direction="InputOutput" Size="15" Type="String" /> </SelectParameters> </asp:SqlDataSource>I keep getting this error: Must declare the table variable "@dDTable".Please does anyone knows the best way to go about this?
I'm designing a sales report. The user would like to be able to look at individual customers against total sales in a report.
I have a parameter that will allow the user to select from a list of customers. Then I need a column that will show that customers sales and the next column will show total sales. If I filter the data set by Customer I will only get that customer's sales. Can I filter on individual columns?
I tried something like
=Sum(IIF(Fields!Name.Value=Parameters!VendorName.Label,Fields!Coil_Weight.Value/code.Expon(Parameters!Units.Value),0))in the expression but that doesn't seem to work.
Hi. I am working on a procedure which can filter data through three tables. First Table is User --------------------------- UserName UserID ---------------------------
Second Table is Customer --------------------------- UserID Cust_Site_Int_ID ---------------------------
Third Table is l Details --------------------------------------------------------------- Cust_Site_Int_ID Created_Date Status ----------------------------------------------------------------
I want to create a stored procedure which can filter through these tables. I will have four input fields in my application to accept parameters. The four parameters will be UserName, two date fields which specifies a range of dates and status. I want the filter to work like this, if only one parameter is provided it will use only that parameter if additional parameter is given it will use the AND logic.
I tried to do a Proc but it is not working any way here it is. So you will get a better idea of what I am trying to achieve.
set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
-- ============================================= ALTER PROCEDURE [dbo].[FilterServiceTickets] -- Add the parameters for the stored procedure here @userName varchar(20)= NULL, @startDate datetime =NULL , @endDate datetime = NULL, @status int = NULL AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON;
-- Insert statements for procedure here SELECT SERVICE_TICKET.SERVICE_TICKET_CODE, SERVICE_TICKET.PROBLEM_REPORTED, SERVICE_TICKET.CONTACT_NUMBER, SERVICE_TICKET.STATUS FROM aspnet_Users INNER JOIN BuildingAddress ON aspnet_Users.UserId = BuildingAddress.UserID INNER JOIN SERVICE_TICKET ON BuildingAddress.Customer_Site_Int_ID = SERVICE_TICKET.CUST_SITE_INT_ID WHERE ((aspnet_Users.UserName = @userName)OR (@userName=NULL)) AND ((SERVICE_TICKET.STATUS = @status) OR (status=NULL)) AND ((SERVICE_TICKET.CREATED_DATE >=@startDate AND SERVICE_TICKET.CREATED_DATE <=@endDate ) OR (@startDate=NULL)OR (@endDate=NULL)OR(@startDate=NULL AND @endDate=NULL)) END
I have an MS Access 2002 application that is distributed to a number of PCs around our office. The data for this application is stored on a central SQL Server that is linked in through ODBC.
This application has been in place for two years and working fine. We recently formatted and restored a PC, and now that particular PC has issues with the Access application.
Every time it tries to filter one of the linked SQL tables on a date field, Access goes unresponsive and GPFs out. If it's in a query that is behind a report, I get the old standard 'Catastrophic Failure'. If I open the table and right-click filter or run a query manually, Access GPFs.
I've tried recreating the ODBC, linking the tables through TCP/IP as well as Named Pipes. Nothing fixes it. All Windows and Office updates have been applied. This is not the first time we've reformatted a PC in the office, but we've never had this issue.
I have a multi-tenant database where each row and each table has a 'TenantId' column. I have created a view which has joins on a CTE. The issue I'm having is that entity framework will do a SELECT * FROM MyView WHERE TenantId = 50 to limit the result set to the correct tenant. However it does not limit the CTE to the same TenantId so that result set is massive and makes my view extremely slow. In the included example you can see with the commented line what I need to filter on in the CTE but I am not sure how to get the sql plan executor to understand this or weather it's even possible.I have included a simplified view definition to demonstrate the issue...
ALTER VIEW MyView AS WITH ContactCTE AS( SELECT Col1, Col2, TenantId
Hi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
I have a table where table row gets updated multiple times(each column will be filled) based on telephone call in data.
Initially, I have implemented after insert trigger on ROW level thinking that the whole row is inserted into table will all column values at a time. But the issue is all columns are values are not filled at once, but observed that while telephone call in data, there are multiple updates to the row (i.e multiple updates in the sense - column data in row is updated step by step),
I thought to implement after update trigger , but when it comes to the performance will be decreased for each and every hit while row update.
I need to implement after update trigger that should be fired on column level instead of Row level to improve the performance?
I'm looking for a query that can "batch" update one table from another. For example, say there are fields on both tables like this: KeyField Value1 Value2 Value3 The two tables will match on "KeyField". I would like to write one SQL query that will update the "Value" fields in Table1 with the data from Table2 when there is a match.
I have an update trigger which fires from a transactiion table to update a parent record in another table. I am getting no errors, but also no update. Any help appreciated (see script below)
create trigger tr_cmsUpdt_meds on dbo.medisp for UPDATE as
if update(pstat) begin update med set REC_FLAG = 2 from deleted dt where med.uniq_id = dt.uniq_id and dt.pstat = 2 and dt.spec_flag = 'kop' end
I imported a SQL Table into SQL DataBase, But I can not update this table even with SQL Server management Studio When I change any data on mentioned table above, Red exclamation sign appears left of the record . How can I correct this problem? Thanks.
This program gets the values of A and B passed in. They are for table columns DXID and CODE. The textbox GET1 is initialized to B when the page is loaded. When I type another value in GET1 and try to save it, the original initialized value gets saved and not the new value I just typed in. A literal value, like "222" saves but the new GET1.TEXT doesn't.
I have contract table which has built in foreign key constrains. How can I alter this table for delete/ update cascade without recreating the table so whenever studentId/ contactId is modified, the change is effected to the contract table.
Thanks
************************************************** ****** Contract table DDL is
create table contract( contractNum int identity(1,1) primary key, contractDate smalldatetime not null, tuition money not null, studentId char(4) not null foreign key references student (studentId), contactId int not null foreign key references contact (contactId) );
I am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc SET stc.[Talks] = fmt.found_talks_type FROM @Find_Missing_Talks fmt WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks) AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
I have a scenario where I have to Update a table with date when there are new records in another table
For example:
I load ODS table with the data from a file in SSIS. the file has CustomerID and other columns.
Now, when there is new record for any customerID in Ods, then Update the dbo table with the most recent record for every CustomerID(i.e. update the date column in dbo for that customerID). Also Include an Identifier that relates back to the ODS table. How do I do this?
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr] for insert as begin declare @liter as decimal(28,6)
Hi, Is this anyway to finding updated/ deleted recored using anyother data flow transformation tasks without using sql task. Can find the new records using merge join task.
Is there better way to merge master table using staging table?
We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)' Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
