Hi
I have a two tables as follows
Table Category
{
ID PK,
LastUpdate DateTime
}
Table Master
{
ID PK
Catrgory DateTime
}
I wanted to update Catrgory coulmn of all records in the Master table with the Value of LastUpdate of the CategoryTable the where the ID of the both the table are same
Can any one please let me know the query
~Mohan
hi, I want to ask how I want update my table using a multiple condition.My table format is like this:
IC_NO
F05
F07
F08
F09
Ind
123
452
C
654
852
P
125
A
526
C
What I want to do is:
IF Ind = C, F05 <> NULL then IC_NO = F05
IF IND = C, F05 = Null and F09 <> Null then IC_NO = F09
IF IND = P, F05 <> Null and F07 <> Null then IC_NO = F07
IF Ind = A, F05 = Null and F08 <> Null then IC_NO = F08
your helpful highly appreciated..thanks
I have around 3 tables having around 20 to 30gb of data. My table A related to table B by a FK and same way table B related to table C by FK. I would like to delete all rows satisfying certain condition from table A and all corresponding related records from table B and C. I have created a query to delete the grandchild first, followed by child table and finally parent. I have used inner join in my delete query. As you all know, inner join delete operations, are going to be extremely resource Intensive especially on bigger tables.
What is the best approach to delete all these rows? There are many constraints, triggers on these tables. Also, there might be some FK relations to other tables as well.
Hi All,I have a database that is serving a web site with reasonably hightraffiic.We're getting errors at certain points where processes are beinglocked. In particular, one of our people has suggested that an updatestatement contained within a stored procedure that uses a wherecondition that only touches on a column that has a clustered primaryindex on it will still cause a table lock.So, for example:UPDATE ORDERS SETprod = @product,val = @valWHERE ordid = @ordidIn this case ordid has a clustered primary index on it.Can anyone tell me if this would be the case, and if there's a way ofensuring that we are only doing a row lock on the record specified inthe where condition?Many, many thanks in advance!Much warmth,Murray
View 1 Replies View RelatedI have four tables: Contact, Contact_Detail, Contact_Information and Contact_Main. I am trying to update a table called Contact_Detail with information from the other three tables.
tbl=Contact
pk=ContactId
Contact_Name
tbl=Contact_Information
pk=Information_ID
Information
tbl=Contact_Detail
detail_ID
Contact_ID
Information_ID
detail
tbl=Contact_Main (no pk, table is temporary)
Contact_Name
Airline
Focal
Title
MailAddress1
MailAddress2
ShippingAddress1
ShippingAddress2
Country
Email
Phone
Fax
Notes
Here is my pseudocode for transact SQL. I have completed QUERY1 and QUERY2 but not sure how to implement UPDATE 1. Any assistance is appreciated.
Select Contact_Main.Contact_Person = Contact.Contact_Name (QUERY 1)
Select Contact_Main.Focal = True (QUERY 2 from QUERY 1)
Begin Create a Contact_Detail record (UPDATE 1 from QUERY 2)
Contact.ContactID -> Contact_Detail.ConctactID
For X = 1 to 12 Update Contact_Detail record with
Increment PK -> Detail_ID
X -> Information_ID
Begin Case
Airline=1
Focal=2
Title=3
MailAddress1=4
MailAddress2=5
ShippingAddress1=6
ShippingAddress2=7
Country=8
Email=9
Phone=10
Fax=11
Notes=12
End Case
Next X
End Begin
I have a scenario where I have to Update a table with date when there are new records in another table
For example:
I load ODS table with the data from a file in SSIS. the file has CustomerID and other columns.
Now, when there is new record for any customerID in Ods, then Update the dbo table with the most recent record for every CustomerID(i.e. update the date column in dbo for that customerID). Also Include an Identifier that relates back to the ODS table. How do I do this?
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr]
for insert
as
begin
declare @liter as decimal(28,6)
[Code] ....
I'm having a problem with the syntax for doing an update to the top 25 records in my table.... This is what i have...
UPDATE TOP (25) FROM ud402.jd_mcp_master SET comments = 'MONDAY 092313 ' WHERE QUEUE_NAME = 'JD_Testing' ORDER BY DATE_WORKED ;
I'm using SQL Server 2000.
I have a table with data similar to this.... Multi field = 0 indicates current record, 1 indicates an old record
FWK NVQ Multi Key Start Date NVQ Date FWK Date
NULL NULL 0 123456 03/04/2006 NULL NULL
NULL NULL 1 123456 03/04/2005 01/09/2006 NULL
NULL NULL 0 234567 03/04/2006 NULL NULL
NULL NULL 1 234567 03/06/2005 04/10/2005 03/11/2005
NULL NULL 0 345678 03/04/2004 NULL NULL
NULL NULL 1 345678 03/07/2003 NULL 01/12/2003
NULL NULL 1 345678 03/08/2002 NULL NULL
NULL NULL 0 456789 30/09/2002 11/06/2003 NULL
NULL NULL 1 456789 29/08/2000 NULL NULL
NULL NULL 0 567890 30/09/2002 11/06/2003 11/06/2003
NULL NULL 1 567890 29/08/2000 30/05/2001 NULL
NULL NULL 0 678901 03/04/2006 01/09/2006 15/09/2006
NULL NULL 1 678901 30/03/2005 30/08/2005 15/08/2005
NULL NULL 0 789012 02/03/2000 03/09/2000 15/09/2000
NULL NULL 0 789013 30/06/2001 07/08/2001 14/08/2001
I need to update the table, setting the first two columns to the date of the old records... ie. I want the table to look like this...
FWK NVQ Multi Key Start Date NVQ Date FWK Date
NULL 01/09/2006 0 123456 03/04/2006 NULL NULL
NULL NULL 1 123456 03/04/2005 01/09/2006 NULL
03/11/2005 04/10/2005 0 234567 03/04/2006 NULL NULL
NULL NULL 1 234567 03/06/2005 04/10/2005 03/11/2005
01/12/2003 NULL 0 345678 03/04/2004 NULL NULL
NULL NULL 1 345678 03/07/2003 NULL 01/12/2003
NULL NULL 1 345678 03/08/2002 NULL NULL
NULL NULL 0 456789 30/09/2002 11/06/2003 NULL
NULL NULL 1 456789 29/08/2000 NULL NULL
NULL 30/05/2001 0 567890 30/09/2002 11/06/2003 11/06/2003
NULL NULL 1 567890 29/08/2000 30/05/2001 NULL
15/08/2005 30/08/2005 0 678901 03/04/2006 01/09/2006 15/09/2006
NULL NULL 1 678901 30/03/2005 30/08/2005 15/08/2005
NULL NULL 0 789012 02/03/2000 03/09/2000 15/09/2000
NULL NULL 0 789013 30/06/2001 07/08/2001 14/08/2001
Can anyone help me with this?
Jon
Code Snippet
DECLARE @TABLE_JR TABLE
([FWK] datetime,
[NVQ] datetime,
[Multi] Smallint,
[Key] varchar(10),
[Start Date] datetime,
[NVQ Date] datetime,
[FWK Date] datetime)
INSERT INTO @TABLE_JR VALUES (null,null,0,'123456','2006-04-03',null,null)
INSERT INTO @TABLE_JR VALUES (null,null,1,'123456','2005-04-03','2006-09-01',null)
INSERT INTO @TABLE_JR VALUES (null,null,0,'234567','2006-04-03',null,null)
INSERT INTO @TABLE_JR VALUES (null,null,1,'234567','2005-06-03','2005-10-04','2005-11-03')
INSERT INTO @TABLE_JR VALUES (null,null,0,'345678','2004-04-03',null,null )
INSERT INTO @TABLE_JR VALUES (null,null,1,'345678','2003-07-03',null,'2003-12-01' )
INSERT INTO @TABLE_JR VALUES (null,null,1,'345678','2002-08-03',null,null )
INSERT INTO @TABLE_JR VALUES (null,null,0,'456789','2002-09-30','2003-06-11',null)
INSERT INTO @TABLE_JR VALUES (null,null,1,'456789','2000-08-29',null,null)
INSERT INTO @TABLE_JR VALUES (null,null,0,'567890','2002-09-30','2003-06-11','2003-06-11')
INSERT INTO @TABLE_JR VALUES (null,null,1,'567890','2000-08-29','2001-05-30',null)
INSERT INTO @TABLE_JR VALUES (null,null,0,'678901','2006-04-03','2006-09-01','2006-09-15')
INSERT INTO @TABLE_JR VALUES (null,null,1,'678901','2005-03-30','2005-08-30','2005-08-15')
INSERT INTO @TABLE_JR VALUES (null,null,0,'789012','2000-03-02','2000-09-03','2000-09-15')
INSERT INTO @TABLE_JR VALUES (null,null,0,'789013','2001-06-30','2001-08-07','2001-08-14')
How to update tblA with records from tblB (see below expected results) when they have common column DrawingNo?
View 4 Replies View RelatedI want to update table2.message based on the criteria of table1.name. for example, all records named John will be updated with 'Msg1' in table 2.message. I am using MS SQL 2000 and below is the scenario.
table1 columns
ID
Name
table2 columns
ID
Message
Select a.Id, a.name, b.message
from table1 a, table2 b
where a.id =b.id
a.id a.name b.message
1 John Msg1
2 Steve Msg2
3 Scott Msg3
4 John NULL - update b.message to 'Msg1'
5 Steve NULL - update b.message to 'Msg2'
6 Scott NULL - update b.message to 'Msg3'
7 John NULL - update b.message to 'Msg1'
8 Steve NULL - update b.message to 'Msg2'
If i will update the record per name i am using the query below and i am pre-selecting all the existing names.
update table2 b
set b.message=(Select top 1 b.message
from table1 a, table2 b
where a.id =b.id
[Code] ...
How to update this in bulk without preselecting all the names?
Every day the timestamp is changed on all rows in one of the table(table has 1 mio records).
What is the best way to find out which query is doing this?
Could be also query which updates only one record(or couple of them) but is executed for each record once.
I have been looking sys.dm_exec_query_stats and sys.dm_exec_sql_text for past but couldn't find.
I can't use event notifications since there is service broker disabled.
Hi,
I have a set of records in database table and I want to update one column to be the same for all of them.
Can you suggest code solution?
Hello,
I have been serching for weeks to resolve this problem. I am new to ASP.NET and trying to make the migration from ASP which I have programmed in for years. I am using Microsoft Visual Web Developer 2005 Express Edition and SQL Express Edtion. I have been working through the Microsoft Video Training at http://msdn.microsoft.com/vstudio/express/beginner/learningpath/ and created a web site using Tier 3 Lesson 8 as the model. My new web site which is a simple phone book applicaiton lets me read the table and select the record without any problem. But the update form lets me edit but when I attempt to Apply the update I get the following error.
Server Error in '/Phonebook' Application.
ObjectDataSource 'ObjectDataSource1' could not find a non-generic method 'Update' that has parameters: FirstName, LastName, PhoneNumber, BossGroup, Department, BossPickup, ShowInPhonebook, Type, Original_FirstName, Original_LastName, Original_PhoneNumber, Original_BossGroup, Original_Department, Original_BossPickup, Original_ShowInPhoneBook, Original_Type, Original_ItemID.
Description: An unhundled expception occured during the execution of the current web request. Please review the stack trace for more information about the error and where it originiated in the code.
The Stack Trace basiclly showes the same error as above.
Also, when I attempt to delete the record I do not get an error but the record does not delete.
What is interesting is that I can add a record so I do not believe that it is a security permissions issue. I have the ISS Authinication Method Enable Anonymous Access set on with full control.
If anyone has any insight as to why this is occuring please let me know.
I have the following table
Code:
10012014-09-01 00:00:00.000BH1-Z-1280180
20012014-09-01 00:00:00.000BH1-Z-9990300
30012014-09-01 00:00:00.000CHO1-Z-1280180
40012014-09-01 00:00:00.000CHO1-Z-9990306
50012014-09-01 00:00:00.000OT11-Z-99906
60012014-09-01 00:00:00.000WRK1-Z-1280180
70012014-09-01 00:00:00.000WRK1-Z-9990306
80022014-09-01 00:00:00.000BH1-Z-0800480
90022014-09-01 00:00:00.000CHO1-Z-0800480
100022014-09-01 00:00:00.000WRK1-Z-0800480
110022014-09-02 00:00:00.000BH1-Z-0800480
120022014-09-02 00:00:00.000CHO1-Z-0800600
130022014-09-02 00:00:00.000OT11-Z-0800120
140022014-09-02 00:00:00.000WRK1-Z-0800600
150012014-09-02 00:00:00.000BH1-Z-1280480
160012014-09-02 00:00:00.000CHO1-Z-1280480
What I want to do is update the table so that it populates the PERCENTAGE column on an empref/hrscode/date basis based on the sum of the WRK hours per day and empref.
EG for 2014-09-01 for empref 001 the result would be
Code:
0012014-09-01 00:00:00.000BH1-Z-12837.037180
0012014-09-01 00:00:00.000BH1-Z-99961.728300
0012014-09-01 00:00:00.000CHO1-Z-12837.037180
0012014-09-01 00:00:00.000CHO1-Z-99962.963306
0012014-09-01 00:00:00.000OT11-Z-9991.2356
0012014-09-01 00:00:00.000WRK1-Z-12837.037180
0012014-09-01 00:00:00.000WRK1-Z-99962.963306
IE Sum WRK = 486 so 180 is 37.037 percentage. Each HRSCODE hours total should total 100% (37.037 + 61.728)
I can write a query to do this individually but how can I so this as a query for the full table.
Code:
declare @@total as float
set @@total=(select SUM(hours) from tmsuser.tmswrhrs where hrscode='worked' and empref='001' and '2014-09-01 00:00:00.000'=procdate)
update tmsuser.TMSWRHRS set PTAS1=(Str(((hours/@@TOTAL*100)),12,3)) where empref='001' and '2014-09-01 00:00:00.000'=procdate
I have the following table
10012014-09-01 00:00:00.000BH1-Z-1280180
20012014-09-01 00:00:00.000BH1-Z-9990300
30012014-09-01 00:00:00.000CHO1-Z-1280180
40012014-09-01 00:00:00.000CHO1-Z-9990306
50012014-09-01 00:00:00.000OT11-Z-99906
[Code] ....
What I want to do is update the table so that it populates the PERCENTAGE column on an empref/hrscode/date basis based on the sum of the WRK hours per day and empref.
EG for 2014-09-01 for empref 001 the result would be
0012014-09-01 00:00:00.000BH1-Z-12837.037180
0012014-09-01 00:00:00.000BH1-Z-99961.728300
0012014-09-01 00:00:00.000CHO1-Z-12837.037180
0012014-09-01 00:00:00.000CHO1-Z-99962.963306
0012014-09-01 00:00:00.000OT11-Z-9991.2356
0012014-09-01 00:00:00.000WRK1-Z-12837.037180
0012014-09-01 00:00:00.000WRK1-Z-99962.963306
IE Sum WRK = 486 so 180 is 37.037 percentage. Each HRSCODE hours total should total 100% (37.037 + 61.728)
I can write a query to do this individually but how can I so this as a query for the full table.
declare @@total as float
set @@total=(select SUM(hours) from tmsuser.tmswrhrs where hrscode='worked' and empref='001' and '2014-09-01 00:00:00.000'=procdate)
update tmsuser.TMSWRHRS set PTAS1=(Str(((hours/@@TOTAL*100)),12,3)) where empref='001' and '2014-09-01 00:00:00.000'=procdate
I need to update more than one record at once. I have ~ 100 records that I have to update and don't want to execute query 100 times.
My query looks like this:
Update Table1
Set Table1.field1 = ( select Table2.field1 from Table2 where Table2.field2 IN ('a', 'b', 'c')
where Table1.field2 IN ( 'a', 'b', 'c')
It obviously failed because subquery returned more than one value and error message stated that I can't use '=' operator in this case.
My question: how could I update the same column from many records in one execution?
I am trying to update a parent table with a summation of its child records. The child records are being deleted because the transaction has become invalid because payment was made with a bad check or there was a posting error. So a rollback of sorts is required.
Here are is the DDL for the tables and DML for the data:
Code:
DECLARE @t1 TABLE
(
[Year] int NOT NULL,
[Parcel] varchar(13) NOT NULL,
[InterestDateTime] datetime NULL,
[Principal] decimal(12, 2) NULL,
[Penalty] decimal(12, 2) NULL,
[Code] ....
I tried to use a Merge statement with an ON MATCH for each TransType, but it complained that I could not have multiple update statements. OK. So I tried a MERGE with single update statement with a case and it complained that I was updating the same parent multiple times, which I was and want to! So, I tried the following update statement and it still does not work, though no error message.
Code:
update t1 set
t1.Principal = t1.Principal + (case when t2.TransType = 'R' then t2.Payment else 0 end),
t1.Penalty = t1.Penalty + (case when t2.TransType = 'P' then t2.Payment else 0 end),
t1.Interest = t1.Interest + (case when t2.TransType = 'I' then t2.Payment else 0 end)
from @t1 t1
inner join @t2 t2 on t2.YEAR = t1.YEAR and t2.Parcel = t1.Parcel
I am expecting the following after the update:
Code:
Select * from @t1
201200000018092013-03-14 00:00:00.000 211.15 10.00 3.14
201100000018092013-03-14 00:00:00.000 206.12 10.00 18.20
201000000018092013-03-14 00:00:00.000 219.41 10.00 35.37
200900000018092013-03-14 00:00:00.000 0.00 0.00 0.00
2012000001808X2013-03-14 00:00:00.000 9.65 0.00 0.06
2011000001808X2013-03-14 00:00:00.000 378.70 10.00 32.73
2010000001808X2013-03-14 00:00:00.000 0.00 0.00 0.00
2009000001808X2013-03-14 00:00:00.000 341.96 3.00 142.74
All I am getting are the original values.
I want to update records in 1 table with the result of a select statement.
The table is called 'MPR_Portfolio_Transactions' and contains the following fields:
[PTR_SEQUENCE]
,[PTR_DATE]
,[PTR_SYMBOL]
,[PTR_QUANTITY]
,[PTR_ACUM]
And the select statement is like this:
SELECT SUM(PTR_QUANTITY) OVER (PARTITION BY PTR_SYMBOL ORDER BY PTR_DATE, PTR_SEQUENCE) AS 'ACUMULADO'
FROM MPR_portfolio_transactions
ORDER BY PTR_SYMBOL, PTR_DATE, PTR_SEQUENCE
This select statement generates one line per existing record. And what I would like to do next is to UPDATE the field 'PTR_ACUM' with the result of the 'ACUMULADO'
the key is PTR_SEQUENCE
I have a table called acc1152 with the field accno. depending on what the value of this field is, i need to replace it with a new value. These are the values i need to update
old value new value
7007 4007
7008 4008
4008 7
7009 4009
7011 4011
4011 ' '
7010 4010
4010 1
7016 4016
4016 1
4506 4006
4512 4012
how do I write one query that will accomplish this?
I want to update the STATUS column based on min date in my table.
For example – If minimum BOOKING_DATE of any RecieptID is below to 2015-10-01, then Status of that RecieptID should be 0 for all records pertaining to dedicated RecieptID So I need an output in this way.
I know how to query up duplicate records, here is what I am using to do so:
Select PhoneNum, Count(PhoneNum) as NumOccurances
From Tester
Group By PhoneNum
Having (Count(PhoneNum) > 1)
when the duplicates arise, I expect them to have unique CallResultCode values, and I would like to make a priority of which value stays and which one gets dumped, keep in mind that I am a SQL noob.
Registered Linux User #365191
Hi guys,
Help me to write my query,
I want to write a insert statement but before insert statement run i need to check a condition like if the same record is already existing or not ? how do i do this using transact -SQL
I mean i have a table call Employee like this definition
ColumnName Datatype
EmployeeID INT
Name Varchar(255)
Records like this
EmployeeID Name
1 John E Mathew
2 Ethel Elizabeth
Ok Before i insert a new record , i need to check if a emplyee name call ="John E Mathew" already in the table or not if Employee Name call ='John E Mathew' not exisits only it should execute my insert statement .
how do i write my SQL ?
regards
suis
I am trying to update all recors in one table with records from another table. My script is only updating one record. How do I fix this? This is what I have:
Code:
set rec1=con.execute ("SELECT * FROM Cancels ORDER BY Canceldate ASC")
rec2 = "update FC2003copy SET LPCancelDate = '" & rec1("canceldate") & "'" & _
"where CaseNum= '" & rec1("CaseNum") & "'"
Con.Execute(rec2)
Hi,
can any one tell me how to update data from one table to another table.
Thanks,
Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
Hi..
I am getting a xml stream of data and putting it to a object and then calling a big sproc to insert or update data in many tables across my database... But there is one Table that i am having trouble inserting it.. But if i run an update it works fine... This my code for that part of the sproc..
IF Exists(
SELECT
*
FROM
PlanEligibility
WHERE
PlanId = @PlanId
) BEGIN
UPDATE
PlanEligibility
SET
LengthOfService = Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,
EligibilityAge = CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End,
EntryDates = @EntryDates,
EligiDifferentRequirementsMatch = Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --@CompMatchM,
LengthOfServiceMatch = CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
EligibilityAgeMatch = CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END,
OtherEmployeeExclusions = @OtherEmployeeExclusions
WHERE
PlanId = @PlanId
END
ELSE BEGIN
INSERT INTO PlanEligibility
(
PlanId,
LengthOfService,
EligibilityAge,
EntryDates,
EligiDifferentRequirementsMatch,
LengthOfServiceMatch,
EligibilityAgeMatch,
OtherEmployeeExclusions
)
VALUES
(
@PlanId,
Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,--@rsLengthOfService,
CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, --@EligibilityAge,
@EntryDates,
Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --having trouble here
CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, --EligibilityAgeMatch,@EligibilityAgeMatch,
@OtherEmployeeExclusions
)
END
Any help will be appreciated..
Regards,
Karen
We are facing a weird scenario in which the snapshot is getting corrupted after insertupdate few million records in to a table .
SQL Server 2012
windows server 2008 R2
service pack 1
64-bit OS
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
Dear Friend,
How to select a desired sequence of records without where condition?
For example I want to select the first 100 records I am using
SELECT TOP 100 * FROM EMPLYEETB;
Like this I want to select the records starts from 101 to 200.
Is it possible? If yes how?
Thanks in advance.
Lovingly,
Meyyarasu
I have a question about SQL Server.
Table patient:
create table patient (pn int,code int,date date,doctorcode int)
insert into patient (pn,code,date,doctorcode)
values
(1,10,'2015-02-19','100),
(1,10,'2015-02-19','101),
(1,10,'2015-02-19','102),
[Code] ...
Table Patientref:
create table patientref
(pn int,code int, sdate date,edate date,status int)
insert into patientref(pn,code,sdate,edate,status)
values
(1,10,'2015-02-13','2015-02-19',1),
(1,10,'2015-02-19','2015-03-24',2),
[Code] ...
Here we need consider patient dates that fall between sdate and edate of the patientrefs table, and then we need to consider the highest status values in order (for example, the highest values in order - 2 is first highest, 4 is second highest, 3 is third highest, and 1 is fourth highest value)
If the date falls between multiple different sdate and edate with the same status values, then we need to consider the latest sdate value and from that entire record we need to extract that value.
Examples: patient
pn | code | date | doctorcode
2 | 10 |2015-02-12 | 101
2 | 10 |2015-02-13 | 102
2 | 10 |2015-02-14 | 103
Table : Patientref:
pn | code | sdate | edate | Status
2 | 10 |2015-02-08 | 2015-02-19 | 4
2 | 10 |2015-02-09 | 2015-02-19 | 2
2 | 10 |2015-02-10 | 2015-02-19 | 2
2 | 10 |2015-02-11 | 2015-02-18 | 1
Here, pn=2 values have dates which fall between sdate and edate of patientref table. Then we give highest values status is 2, and status 2 values have two records, then we go for max sdate(latest sdate). Then this pn=2 latest sdates is 2015-02-10 and we need to retrieve the corresponding edate and status values.
pn = 4donot have sdate and edate and status values dut not fall conditon
Based on this, the desired output is below:
pn | code | date | doctorcode | sdate |edate |status
1 | 10 |2015-02-19 | 100 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 101 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 102 |2015-02-19 |2015-03-24 | 2
2 | 10 |2015-02-12 | 101 |2015-02-10 |2015-02-19 | 2
[Code] ...
I tried it like this:
select p.pn,p.code,p.[date],p.doctorcode,pr.sdate,pr.edate,pr.[status] from patient p
outer apply (select top 1 pr.pn,pr.code,pr.sdate,pr.edate,pr.[status] from patientref pr
where pr.pn=p.pn and pr.code=p.code and p.date between pr.sdate and pr.edate
order by case when pr.status=2
then 1 when pr.status=4 then 2
when pr.status=3 then 3
when pr.status=1 then 4 end ,pr.sdate
)pr
but this query not given expected result.here when dos not fall between sdate and edate that records not given in the above query. I required that records also.if not fall b/w condition then we need retrive that records empty values for that records.
Hi, all experts here,
I am desperate to need you help.
Could you please give me any advices on how to filter out the records through out the data flow by any particular condition? E.g. In my case, I want to filter out rows with null id (will get rid of those rows with null id which are not matched in the look up component)? Hope it is clear for your help and I am looking forward to hearing from you for your help and thank you very much.
With kindest regards,
Yours sincerely,
I need to write a query on a table..
table defination .. table Client_Master
file_id int identity(1,1) primary key
, client_id int
,LOAN_SANCTION_DATE datetime
,is_reject bit
has Data ..
FILE_ID CLIENT_ID
LOAN_SANCTION_DATE IS_REJECT
21139 22784
2014-02-03 00:00:00.000 0
21141 22784
2014-02-03 00:00:00.000 NULL
20869 22784
2014-02-03 00:00:00.000 1
20870 22784
2014-02-03 00:00:00.000 0
21571 22784
2014-02-03 00:00:00.000 1
66056 22784
2014-02-03 00:00:00.000 1
Above has 6 files entries for client id 22784 and LOAN_SANCTION_DATE 2014-02-03 out of which 3 are rejected ..
Now , i want to write a query to select those distinct client_id , LOAN_SANCTION_DATE from Client_Master where all files has been rejected ..
means by grouping client ID and LOAN_SANCTION_DATE all the files are rejected ..
I have wrote as below .. got the result but not satisfy with the query
SELECT DISTINCT CLIENT_ID,LOAN_SANCTION_DATE,COUNT(FILE_ID) AS No_Of_Files
,COUNT(DISTINCT CASE WHEN IS_REJECT=1 THEN FILE_ID END )AS No_Of_Rejected
FROM dbo.FILE_MASTER
GROUP BY CLIENT_ID ,LOAN_SANCTION_DATE
HAVING
COUNT(FILE_ID)=COUNT(DISTINCT CASE WHEN IS_REJECT=1 THEN FILE_ID END )