I have multiple product tables with a "ListPrice" column. I want to use a temporary table that contains "ProductID" and "ListPrice" columns and execute a stored procedure that will update the "ListPrice" column in all product tables with the "ListPrice" from temporary table where "ProductID" from temporary table matches "ProductID" in product tables.
I am new at writing stored procedures.
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
Given the below table relationships, I am trying to update the price of disk by %20 percent that were interpreted by 'Joe Smith'. I took a crack at this, but I do not feel comfortable with it. Do I need to do some type of join or union?
UPDATE Disk
SET price = price *.20
WHERE Interpreter.name = ‘Joe Smith;
MusicalWork (idwork, title)
Piece (idpiece, duration, iddisk, idwork)
Disk (iddisk, brand, type, issuingdate, price)
Execute (idpiece, idinterpreter)
Interpreter (idinterpreter, name, address)
I have a mess:
Table1(T1) contains Column1 (C1) which must be appended to Column2 (C2) in Table2 (T2) where an identifying code column(ID) matches in each table. An example of what I want is, where T1.C1 = 'Aluminum' and T2.C2 = 'Material', I would like it to be updated to T2.C2 = 'Material: Aluminum'. I tried this:
UPDATE T2
SET T2.C2 =
(SELECT T1.C1
FROM T1
WHERE T1.ID = T2.ID) + ':' + T2.C2
This did not work out. How should I fix this?
Hi,I tried to use the following query to update a value in one table witha value from another table:UPDATE tbl1SET col1 = tbl2.col2FROM tbl1, tbl2WHERE tbl1.[id] = tbl2.[id]but it won't work. I also tried this with a subquery using "TOP 1",but that wouldn't work either. SQL Server 2000 gives me the followingerror-message:"Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.The statement has been terminated."What is wrong? It seems that the join is not functioning properly, butit functions properly with a rather 'simple' SELECT. How to updatethose fields, other than by hand ;)Regards,Falco Vermeer
View 3 Replies View Relatedhi all,i'm working on a formview which will update 2 tables which are linked together but..i'm getting an error of the control not being found.my code is as shown below <asp:SqlDataSource ID="invDetSrc" runat="server" ConnectionString="<%$ ConnectionStrings:rockwellConnectionString %>" ProviderName="<%$ ConnectionStrings:rockwellConnectionString.ProviderName %>" SelectCommand="SELECT rockwell.logix_asset_list.Inventory_ID, rockwell.vendor.Vendor_Name, rockwell.logix_asset_list_category.Category_Name, rockwell.logix_asset_list.Total_Quantity, rockwell.logix_asset_list.Quantity_In_Stock, rockwell.logix_asset_list.Part_Number, rockwell.logix_asset_list.On_Order, rockwell.logix_asset_list.ImageUrl, rockwell.logix_asset_list.DrawingUrl, rockwell.logix_asset_list.Description FROM rockwell.logix_asset_list, rockwell.logix_asset_list_category, rockwell.vendor WHERE rockwell.logix_asset_list.Logix_Asset_List_Category_ID = rockwell.logix_asset_list_category.Logix_Asset_List_Category_ID AND rockwell.logix_asset_list.Vendor_ID = rockwell.vendor.Vendor_ID AND rockwell.logix_asset_list.Part_Number = ?" UpdateCommand="UPDATE vendor, logix_asset_list set vendor.vendor_name= @Vendor_Name, logix_asset_list.Total_Quantity=@Total_Quantity, logix_asset_list.Quantity_In_Stock=@Quantity_In_Stock, logix_asset_list.Part_Number=@Part_Number, logix_asset_list.On_Order=@On_Order, logix_asset_list.Description=@Description WHERE logix_asset_list.Vendor_ID = vendor.Vendor_ID and logix_asset_list.Inventory_ID = @Inventory_ID" > <SelectParameters> <asp:ControlParameter ControlID="rstGrid" Name="?" PropertyName="SelectedValue" /> </SelectParameters> <UpdateParameters> <asp:ControlParameter Type="Int32" ControlID="Total_Quantity" ConvertEmptyStringToNull="true" Name="@Total_Quantity"/> <asp:ControlParameter Type="string" ControlID="Vendor_Name" ConvertEmptyStringToNull="true" Name="@Vendor_Name"/> <asp:ControlParameter Type="Int32" ControlID="Quantity_In_Stock" ConvertEmptyStringToNull="true" Name="@Quantity_In_Stock"/> <asp:ControlParameter Type="string" ControlID="Part_Number" ConvertEmptyStringToNull="true" Name="@Part_Number"/> <asp:ControlParameter Type="string" ControlID="On_Order" ConvertEmptyStringToNull="true" Name="@On_Order"/> <asp:ControlParameter Type="string" ControlID="Description" ConvertEmptyStringToNull="true" Name="@Description"/> <asp:ControlParameter Type="Int32" ControlID="Inventory_ID" ConvertEmptyStringToNull="true" Name="@Inventory_ID"/> </UpdateParameters> </asp:SqlDataSource> <asp:FormView ID="FormView1" runat="server" BackColor="White" BorderColor="#DEDFDE" BorderStyle="None" BorderWidth="1px" CellPadding="4" DataSourceID="invDetSrc" ForeColor="Black" GridLines="Vertical" DataKeyNames="Inventory_ID"> <EditItemTemplate> <table border="0" cellpadding="3" cellspacing="3" style="background-color: white; color: black;"> <tr> <td colspan="2"> <asp:Image ID="Image1" runat="server" Height="150px" ImageUrl='<%# "~/Image/photo/Logix%20Asset/"+Eval("Category_Name")+"/"+Eval("ImageUrl") %>' Width="150px" /> <br /> <asp:HyperLink ID="drawingLink" runat="server" NavigateUrl='<%# "~/Image/drawing/Logix%20Asset/"+Eval("Category_Name")+"/"+Eval("DrawingUrl") %>' Target="_blank" Text="View Drawing" ForeColor="Blue"></asp:HyperLink> </td> <asp:HiddenField ID="HiddenField1" runat="server" Value='<%# Bind("Inventory_ID") %>' /> </tr> <tr> <td style="color: black"> Part Number:</td> <td> <asp:TextBox ID="Part_Number" runat="server" Text='<%# Bind("Part_Number")%>'></asp:TextBox> </td> </tr> <tr> <td> <strong style="color: black">Vendor:</strong></td> <td> <asp:TextBox ID="Vendor_Name" runat="server" Text='<%# Bind("Vendor_Name")%>'></asp:TextBox> </td> </tr> <tr> <td style="color: black"> <strong>Total Quantity:</strong></td> <td> <asp:TextBox ID="Total_Quantity" runat="server" Text='<%# Bind("Total_Quantity")%>'></asp:TextBox> </td> </tr> <tr> <td style="color: black"> <strong>Quantity In Stock:</strong></td> <td> <asp:TextBox ID="Quantity_In_Stock" runat="server" Text='<%# Bind("Quantity_In_Stock")%>'></asp:TextBox> </td> </tr> <tr> <td style="color: black"> <strong>Quantity on Order:</strong></td> <td> <asp:TextBox ID="On_Order" runat="server" Text='<%# Bind("On_Order")%>'></asp:TextBox> </td> </tr> <tr> <td style="color: black; height: 44px;"> <strong>Description:</strong></td> <td style="height: 44px"> <asp:TextBox ID="Description" runat="server" Text='<%# Bind("Description")%>' Height="53px" TextMode="MultiLine" Width="150px"></asp:TextBox></td> </tr> <tr> <td> <asp:Button ID="EditBtn" runat="server" Text="Submit Changes" Width="106px" CommandName="Update" /></td> <td> <asp:Button ID="Cancel" runat="server" Text="Cancel" CommandName="cancel" /></td> </tr> </table> </EditItemTemplate> </asp:FormView>any help would be much appreciated!
View 1 Replies View Related
I have 3 tables
Table1
F1, F2, F3
1 ABC DEF
Table2
F1,F2
1,123
Table3
F1,F2
1,456
I need to update Table2 and Table3 based on Table1 fields. All the 3 tables having F1 primary/foreign key relationship.
The output should looks like for table2 and table3 must be:
Table2
F1,F2
1,ABC
Table3
F1,F2
1,DEF
I need a single update statement. Appreciate your help.
Thanks,
Sampath
I have got 4 MS Access Database Files, which have got 3 Tables each, means Total 12 Tables which gets updated with new data every evening, by an external application. Means new data gets appended to all these 12 Tables.
I want to have exact same 4 Databases, which have got 3 Tables each, means Total 12 Tables, but WITHIN MS SQL SERVER. And then update all of these 12 Tables every evening, with the corresponding updates from the respective tables from the MS Access Databases.
What are the various options to get this kind of work done in SQL Server. I do not want to Manually Update all these 12 tables every evening into SQL Server. Hopefully there would be some easier method to do this in automatic manner.
Hello All,
I want to update multiple tables using single query and fields name are same of tables.
I am trying like:
update tablename1 t1,tablename2 t2 set t1.fieldname1 = t2.fieldname1 = 'value' where condition;
or
update tablename1 t1,tablename2 t2 set t1.fieldname1 = 'value' t2.fieldname1 = value where condition;
Plzzzzzz help me.Thanx in advance.
Thanx & Regards,
Smita.
Hi,
I am using SQl server 2005.
want to update rows in 2 tables,which have a relation on Id field.
Some thing like
Update tblA a , tblB b
Set a.UpdatedDt=getdate(),b.Updateddt=getdate()
where a.Id=b.Id and a.Name='xyz'
can anyone out there help me?
Thanks
Renu
Hi,
I'm new to SQL Server but not new to SQL because I used it with Oracle. I wonder if it is possible to do this kind of statement on SQL Server:
UPDATE TableX M
SET (M.column1, M.column2, M.column3)=
(SELECT T.column1, T.column2, G.column3)
FROM Table_Y T,
Table_Z G
WHERE join condition))
WHERE EXISTS (join condition for TableX)
Basically, I'd like to update multiple columns in one statement but for some reason I can not get it to work.
What would be the equivalent on SQL Server?
Thanks for the help,
Laszlo M
Conditional Update of a field from multiple tables..I have a target table with two fields: Date and ID..There three source tables: S1, S2, S3, each of them has three fields: Date, ID, and Score...Now I want to update the target table: put the ID into the ID field which has the highest Score from the three tables on each day.
View 13 Replies View Relatedi have a table named masterlist wherein the columns are :
name-----age------sex
andrew---19-------male
trisha---23------female
and i have also another table which is namelist that is linked to the masterlist table.. after i search for the record andrew in the table namelist..i updated andrew as 25 and sex is female..now i want reset andrew's record, same to the records that andrew has in the table masterlist..
I have got 4 MS Access Database Files, which have got 3 Tables each, means Total 12 Tables which gets updated with new data every evening, by an external application. Means new data gets appended to all these 12 Tables.
I want to have exact same 4 Databases, which have got 3 Tables each, means Total 12 Tables, but WITHIN MS SQL SERVER. And then update all of these 12 Tables every evening, with the corresponding updates from the respective tables from the MS Access Databases.
I do not want to Manually Update all these 12 tables every evening into SQL Server. Hopefully there would be some easier method to do this in automatic manner.
I have a system that uses 3 tables of the same schema to track status of a transaction:
table 1: submitted
table 2: pending
table 3: confirmed
Transactions are moved from one table to another when the transactions go through different states. How do I maintain a unique identity of a transaction across the 3 tables? Some transactions are added directly to confirmed. Having a counter table affects scalability and increase blocking! Please help.
Hello,
Is it possible to get a list of rows from Multiple tables which have the same Column Name. I have 3 tables which comtain similar info
and I want to get a list of Names
the structure is
ID;Name;Address;Phone No.
I was thinking something along the lines of SELECT Name FROM TABLE1,TABLE2, TABLE3
But this does not work.
Is there a nice way of doing this with SQL or should I do code outside the SQL DB
How do I update a table's column, with the values of another tables column where the primary key between is Part_Number?
table2 = temp_table
Update Actuator_Components Set Scanned_Drawings = table2.Scanned_Drawings
I have a single update statement that updates the same column multipletimes in the same update statement. Basically i have a column thatlooks like .1.2.3.4. which are id references that need to be updatedwhen a group of items is copied. I can successfully do this withcursors, but am experimenting with a way to do it with a single updatestatement.I have verified that each row being returned to the Update statement(in an Update..From) is correct, but that after the first update to acolumn, the next row that does an update to that same row/column combois not using the updated data from the first update to that column.Does anybody know of a switch or setting that can make this work, or doI need to stick with the cursors?Schema detail:if exists( select * from sysobjects where id = object_id('dbo.ScheduleTask') and type = 'U')drop table dbo.ScheduleTaskgocreate table dbo.ScheduleTask (Id int not null identity(1,1),IdHierarchy varchar(200) not null,CopyTaskId int null,constraint PK_ScheduleTask primary key nonclustered (Id))goUpdate query:Update ScheduleTask SetScheduleTask.IdHierarchy = Replace(ScheduleTask.IdHierarchy, '.' +CAST(TaskCopyData.CopyTaskId as varchar) + '.', '.' +CAST(TaskCopyData.Id as varchar) + '.')FromScheduleTaskINNER JOIN ScheduleTask as TaskCopyData ONScheduleTask.CopyTaskId IS NOT NULL ANDTaskCopyData.CopyTaskId IS NOT NULL ANDcharindex('.' + CAST(TaskCopyData.CopyTaskId as varchar) + '.',ScheduleTask.IdHierarchy) > 0Query used to verify that data going into update is correct:selectScheduleTask.Id, TaskCopyData.Id, ScheduleTask.IdHierarchy, '.' +CAST(TaskCopyData.CopyTaskId as varchar) + '.', '.' +CAST(TaskCopyData.Id as varchar) + '.'FromScheduleTaskINNER JOIN ScheduleTask as TaskCopyData ONScheduleTask.CopyTaskId IS NOT NULL ANDTaskCopyData.CopyTaskId IS NOT NULL ANDcharindex('.' + CAST(TaskCopyData.CopyTaskId as varchar) + '.',ScheduleTask.IdHierarchy) > 0
View 8 Replies View RelatedI am trying to run an update statement against a vendor's database that houses HR information. If I run a regular select statement against the database with the following query, it returns without error:
SELECT "QUDDAT_DATA"."QUDDAT-INT", "NAME"."INTERNET-ADDRESS", "QUDDAT_DATA"."QUDFLD-FIELD-ID", "QUDDAT_DATA"."QUDTBL-TABLE-ID"
FROM "SKYWARD"."PUB"."NAME" "NAME", "SKYWARD"."PUB"."QUDDAT-DATA" "QUDDAT_DATA"
WHERE ("NAME"."NAME-ID"="QUDDAT_DATA"."QUDDAT-SRC-ID") AND "QUDDAT_DATA"."QUDTBL-TABLE-ID"=0 AND "QUDDAT_DATA"."QUDFLD-FIELD-ID"=16 AND "QUDDAT_DATA"."QUDDAT-INT"=11237When I try to convert it into an
[Code] ....
I am assuming I am receiving this error because it doesn't know where to find QUDDAT-INT? How can I fix that?
The "QUDDAT-INT" column houses the employee number. So in the case of the SELECT query above, I am testing against a specific employee number.
I want to display records from @table1 only when combination of col2,col3 and col4 are present in @table2.In Below case I want output as: below two records only.
'test1', 'need this record', 25, {d '1901-01-01'}
'test3', 'some longer value', 23, {d '1900-01-01'}
declare @table1 table (
col1 varchar(10) not null,
col2 varchar(200) null,
col3 int not null,
[code]....
All,
i am looking for a query which fetches data from column 'managerid' which spread across 20 tables,
Managerid colums is spread across 20 tables and i need only managerid data from all the tables available, data for managerid column will be different in each table.
can anyone help me regarding the same.
Does anyone have a script that can add a GUID Column to multiple Tables in a Database.
The SQL script below adds a column to a single table in a database. But i need a script that can add a column to all the tables in a database. Thanks
USE ProductDB
ALTER TABLE dbo.Employees
Add EmployeeGUID UNIQUEIDENTIFIER ROWGUIDCOL NOT NULL DEFAULT NEWSEQUENTIALID()
I have a query, I am trying to update a certain column in my query you can see that is hard coded. The column that I am trying to update is "O_Test" I used a select statement trying to figure out how many records that accounts for with the entire database of all the tables. I got 643 records. So I am wondering if there is a way I can update all the columns without looking up each table and updating each one. This Update statement wont work because I am accounting for all records in the DB of all tables associated of what I hard coded
SELECT t.name AS table_name,
SCHEMA_NAME(schema_id) AS schema_name,
c.name AS column_name
FROM sys.tables AS t
INNER JOIN sys.columns c ON t.OBJECT_ID = c.OBJECT_ID
WHERE c.name LIKE '%O_Test%'
ORDER BY schema_name, table_name;
Does anyone have a script that can add a GUID Column to multiple Tables in a Database.
For example when a table has an Identity column like EmployeeID, a column called EmployeeGUID is added to the table. When a table has an Identity column like CustomerID, a column called CustomerGUID is added to the table. When a table has an Identity column like OrderID, a column called OrderGUID is added to the table.
I intend to implement replication in SQL Server 2005, so i want to add new GUID columns to all the table in my database before implementing replication
The SQL script below adds a column to a single table in a database. But i need a script that can add a column to all the tables in a database.
Thanks
USE ProductDB
ALTER TABLE dbo.Employees
Add EmployeeGUID UNIQUEIDENTIFIER ROWGUIDCOL NOT NULL DEFAULT NEWSEQUENTIALID()
Hi all,
I want to produce some output for Mainframe application. For that I want to insert values from multiple table as source to a single column (huge in size)of a different table (Destination table). There may be same related records in all of the source tables with the primary key. When I export values from the source tables , each related records should be insterted to the destination table's field (multiple entries for each table). Please advise.
Thanks
I have two tables table1 and table2 and having a common column "col1"
When i ran the following query
UPDATE table1, table2 SET col1=FALSE WHERE id = 1;
getting the following error
Error Code: 1052 Column 'col1' in field list is ambiguous
id column exist in both the tables and need to update both the tables to false where the id is equivalent to 1.
how to achieve this in single query?
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
i have database which has 25 tables. all tables have productid column. i need to find total records for product id = 20003 from all the tables in database.
View 9 Replies View RelatedHi! I have a general SQL CE v3.5 design question related to table/file layout. I have an system that has multiple tables that fall into categories of data access. The 3 categories of data access are:
1 is for configuration-related data. There is one application that will read/write to the data, and a second application that will read the data on startup.
1 is for high-performance temporal storage of data. The data objects are all the same type, but they are our own custom object and not just simple types.
1 is for logging where the data will be permanent - unless the configured size/recycling settings cause a resize or cleanup. There will be one application writing alot [potentially] of data depending on log settings, and another application searching/reading sections of data.
When working with data and designing the layout, I like to approach things from a data-centric mindset, because this seems to result in a better performing system. That said, I am thinking about using 3 individual SDF files for the above data access scenarios - as opposed to a single SDF with multiple tables. I'm thinking this would provide better performance in SQL CE because the query engine will not have alot of different types of queries going against the same database file. For instance, the temporal storage is basically reading/writing/deleting various amounts of data. And, this is different from the logging, where the log can grow pretty large - definitely bigger than the default 128 MB. So, it seems logical to manage them separately.
I would greatly appreciate any suggestions from the SQL CE experts with regard to my approach. If there are any tips/tricks with respect to different data access scenarios - taking into account performance, type of data access, etc. - I would love to take a look at that.
Thanks in advance for any help/suggestions,
Bob
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedI have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
hi,friends
we show record from multiple table using single 'selectcommand'.
like....
---------
select *
from cust_detail,vend_detail
---------
i want to insert value in multiple database table(more than one) using single 'insert command'.
is it possible?
give any idea or solution.
i want to update value in multiple database table(more than one) using single 'update command'
i want to delete value in multiple database table(more than one) using singl 'delete command'
it is possible?
give any idea or solution.
it's urgent.
thanks in advance.